PROVN OF GUN SHED AT 56 FD REGT ILP LOC, PROVN OF FALSE CEILING IN BLDG NO 55 RA LINE ( OR LIVING ACCN ) AT 148 LT AD REGT ( COMP) AND PROVN OF OFFRS TOILET BLDG NO RA-16 ( PINE ARTY OFFRS MESS ) HELD ON CHARGE OF 9 ARTY CAMP UNDER AGE B/R-I AND AGE

Amount

M & L for point wiring with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, stranded, FRLS PVC insulated, unsheathed, copper conductor cable in and including PVC concealed conduit of any size/dia complete with all accessories/fittings, brass screws, washer etc, sunk zinc coated pressed steel terminal boxes with 3mm thick plastic laminated sheet top cover concealed in wall with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated stranded copper conductor cable, unsheathed and connected to common earth and earth duly for One tube light/Bulb/ street light,fan / Exhaust fan point controlled by one, one way switch 05 / 06 Amps complete all as specified and directed

All as per serial item No 01 here - in - before but One 3 pin, 05 / 06 Amps socket outlet point on independent board controlled by one, one way 05 / 06 Amps switch.

All as per serial item No 01 here - in - before but One 3 pin, 05 / 06 Amps socket outlet point on same board controlled by one, one way 05 / 06 Amps switch.

All as per serial item No 01 here - in - before but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 15 / 16 Amps socket outlet point on independent board.

S & F switch piano flush type, 05 / 06 Amps single pole, one way 240 volts complete all as specified & directed .

S & F socket outlet 5 pin, 05 / 06 Amps flush type 240 volts complete all as specified & directed .

S & F socket outlet 3 pin, 05 / 06 Amps and 3 pin 15 / 16 Amps (2 in 1 Multipurpose) 240 volts complete all as specified & directed

S & F switch piano flush type, 15 / 16 Amps single pole, one way 240 volts complete all as specified & directed .

S & F ceiling rose, 3 phase/PVC/polycarbonate isolated body complete all as specified & directed .

S & F lamp holder (Angular / Straight), insulated body, with back plate fixed on and including anodised pressed steel box 100x 100 mm flush to the wall with 3 mm thick backlite cover all as specified and directed.

S & F LED lamp 2 pin 9 watt , 6500 k, 240 V complete all as specified & directed .

S & F LED light fittingT-5 type surface mounted , polycarbonate tube, 1x20 watt,6500 k, 220V, including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S & F LED light fitting mirror type with high output diffuser 2 feet,10 watt 220V, AC decorative type with driver holder and LED lamp including connecting up with three core flexible copeer conductor cable of suitable size complete all as specified and directed.

S & F 35W LED Building security light energy saving & environmental friendly long life luminaire with high power LEDs as light source and electronic driver including security light brackets of 32 mm dia GI pipe medium grade upto 1.2 mtr long bend to shape at 100-120 degree including flat iron clamps and Suitable nuts and bolts grouted in wall including all material required for fitting all as specified and directed.

S & F sheet metal enclosure double door, single pole and neutral, AC, 240 volts, 4 way, with 200 Amps rated copper bus bar and IP - 43 protection with metal double door and flush to wall including all cutting on wall and making good including two coats of white/colour washing/distempering etc to match the existing disturbed surfaces incl taking down old u/s DB's complete all as specified and directed. .

S & F MCB, SP, AC, 240 volts "B" series capacity of 6 to 32Amps, 10kA and making connections complete all as specified & directed.

S & F MCB, SPN, AC, 240 volts "B" series capacity of 40Amps, 10kA and making connections complete all as specified & directed.

M & L for earthing complete with galvanised mild steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level steel earth plate connected with GI wire 04mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in elect plate No.3 of SSR part I connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipe medium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover in PCC 1:2:4 type B1 duly reinforced with MS Bars 6mm dia at the rate of 150mm center to center both way with suitable lifting handle and pit / chamber in PCC 1:3:6 type C1 , Angle iron 40x40x5mm frame for pit cover including testing on completion complete all as specified and directed.

S & F Exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, RPM 1200, copper winding of sweep 250 mm complete all as specified and directed. .

Supply & Laying XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 volt grade cross sectional area of 10 sqmm 2 core complete all as specified and directed. .

S & F electric water heater storage type steel body and heating element upto 2 KW capacity 25 litre, complete all accessories such as safety valve, thermostate, NRV, connectio piece etc complete all as specified and directed. .

Surface excavation in soft/loose soil n exc 30 cm deep and averaging 15 cm deep and getting out complete all as specified and directed.

Excavation in trenches n.exc 1.50mtr wide and n.exc 1.50mtr in depth and getting out in hard/dense soil complete all as specified and directed.

M&L for cement concrete (1:4:8) type D-2 using 40mm graded agg as in Foundations filling and mass concrete complete all as specified and directed.

Removing excavated soil n.exc 50m and depositing where directed at a level n. exc. 1.5 m above the starting point all as specified and directed.

Returning filling in,including spreading levelling, watering and well ramming in layers not exe 25 cm.in hard dense soil complete as specified and directed.

M&L for brick work with fly ash old size bricks straight or curved on plain exc. 6m mean radius built in CM 1:6 complete as specified and directed.

M&L for flat form work to sides of concrete foundations, footing bases of columns, raft and raft beams, sides and soffits(if any) of foundation and plinth beams and similar work, veritical or to batter rough finished surface of concrete complete as specified and directed.

M&L for form work to sides of pillars posts, struts piers, columns & stanchions square rectangular or polygonal for fair finished flat surfaces of concrete complete as specified and directed.

M&L for TMT bars 10 mm dia and above & over cut to length, bent to shape required including cranking bending spirally for hooping for column, hooking ends & binding with & including mild steel wire (not less than 0.9 mm dia) or securing with clips complete all as specified and directed

All as per item No 30.00 here-in-before but TMT bars 6mm dia to 8mm dia in stirrups spacers & binders etc all as specified and as directed.

M&L for RCC M-25 (design mix) for foundation including rafts, footings, foundation beams, plinth beams, bases for columns, etc, complete as specified and directed.

M&L for RCC M-25(design mix) for columns, pillars, pierrs, posts & struts etc complete as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1:6 on wall of brick work or concrete surface, finished even and smooth with out extra lime or cement complete all as specifed and directed

M&L for preparation of new steel surface of any description not otherwise described exc. 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

M&L for broken stone Hardcore of guage exc 63mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80mm thickness, M-35 grade, with grey cement and pigment over and including 50mm thick river sand cusion and packing the edges/sides of the blocks with PCC 1:2:4 complete as specified and directed..

M & L for 100mm thick Cement conc type C-2, 1:3:6 using 40 mm graded crushed stone agg as in sub base complete as specified and directed.

S&F rolled mild steel in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc including notching, drilling, fittings, riveting and / or welding or connecting with bolts and nuts (including rivets or bolts and nuts), providing fittings angle cleats, fish plates, gusset plates etc., also for wedging, plumbing, truing up and fixing conf to Fe-410-w (Gde-E -250) quality A complete all as specified and directed.

S&F pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete as specified and directed.

S&F pre-painted galvatume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall/ridges etc, fixed with self tapping screws complete as specified and directed.

M&L for 50mm thick cement concrete (1:3:6) type C1, using 20mm graded stone aggregate as in plinth protection,floor finishing cement concrete surfaces even and smooth without using extra cement, Joints of plinth protection shall be filled with bitumen mastic (1:3) complete all as specified and as directed.

M & L for provision of GI frame work (snap grid) suitable for size as in false ceiling of size 605mmx605mm including fixing 4mm thick gypsum board /E-board in ceiling size 595mmX595mmX4mm fixed to metallic snap grid consisting of following and all as directed including dismantling wall and ciling boards or insulation boards/slabs any thickness including cover fillets. (i) Gi sections incorporated in frame work shall conform to designation given in IS: 737-1986. (ii) The snap grid shall conist of GI frame work main/cross tee of size 36.5mmx25mmx1.0mm thick and 25mmx25mmx1.00mm respectively. (iii) Snap grid frame shall be fixed to ceiling with supporting hangers consisting of Supply and fix 2mm to 4mm dia mild steel Gi wire. (iv) The main and cross tees shall be jointed at junction/crossings with GI frame work angle bracket, of size 15mmx15mmx1.0mm thick, fixed with suitable mild steel, bolts, nuts and washers all as per manufacturer's instructions. (v) The snap grid(main/cross tee section) shall be supported at ends all along the wall with Gi frame work angle of size 25mmx25mmx1.00mm anodized thick (vi) Size of the snap grid shall be 605mmx605mm. (vii) Minimum average thickness of anodizing shall be 15 micron. complete all as specified & directed.

M & L for preparation of new plastered surface of wall by applying 1mm thick wall care putty and making the surface smooth and applying two coat of oil emulsion distemper over one coat of primer using roller for painting complete all as specified & directed.

M&L for RCC design Mix M-25 as in beam ,centilevers,bressument, lintels over 1.5 m span complete all as specified and directed.

M&L for RCC design Mix for slab supported on walls, beams and columns in floors, roofs, landings balconies canopies, deck slab and in shelves and the like etc etc all as specified and directed.

M&L for form work to sides and soffits of floors or roof beams haunching, girders bressumers lintel cantilevers shelves including supports, overhangs etc also splays between floors and beams etc for rough finished flat surfaces of concrete complete all as specified and directed.

M&L for Form work to soffits of suspended slab such as roof slabs, floors slabs, landing & similar work not exceeding 200 mm thick (Horizontal or sloping) etc for rough finished flat surfaces of concrete complete all as specified and directed.

M&L for formwork to rough finished flat surfaces of concrete of chullah hoods, chajjas, troughs and similar items including edges complete all as specified and directed.

M&L for 75 mm thick plain cement concrete 1:4:8, type D2 using 40mm graded crushed stone aggregate as in sub base. complete all as specified and directed.

M&L for coloured Chequered cement concrete tiles 30cm x 30cm x 20mm thick, set, jointed and pointed in neat cement slurry in floors with Grey Cement and no pigment laid over including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M&L for brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:4 complete all as specified and directed.

M&L for broken stone or boulder Hardcore of guage n exc 63 mm, deposited, spread and levelled in layers not exc 15 cm thick , watered and rammed to a true surface etc complete all as specified and directed .

M&L for rendering 15mm thick on fair faces of brick work or concrete surface in CM 1:4, mixed with liquid water proofing compound @ 200ml per 50kg cement, surface finsihed even and smooth without using extra cement. Note:- WPC shall be measured and paid separately complete all as specified and directed.

M&L for rendering 10mm thick in CM 1:4 on ceiling surface, surface finsihed even and smooth without using extra cement complete all as specified and directed.

Supply only liquid integral water proofing compound complete all as specified and directed.

S&F framed work such as grill framed guard for fixing arrangement for wire cloth etc complete all as specified and directed.

S&F framed work as in doors or gates of angle or other section with gussets plates, rails, braces, etc, complete drilled for fixing of steel sheeting or other covering, Doors, etc, to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings(exclusive of steel, sheeting or other covering, running rails and guides) and hanging, also fastening and fixing complete conforming to Fe-290 Gde- E-165 complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall by applying wall care putty averaging thickness 2mm and rubbing with sand paper for making smooth surface and applying two coat of oil emulsion distemper over one coat of primer through roller, complete all as specified and directed .

M&L for preparation of new surface of of wall by applying 3mm thick wall care putty and making the surface smooth Finishing walls and applying Acrylic Smooth exterior paint of required shade (Two or more coat applied @ 1.67 litre/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) using roller for painting complete all as specified and directed.

M& L for preparing plastered orun plastered new surfaces of ceiling and applying three coats of white wash on ceiling surface complete all as specified and directed.

S&F mild steel window with side hung shutter incl projecting type hinges with steel handle and steel peg stay complete with glazing complete with glazing bars, dovetailed or welded complete all as specified and directed.

S&F Steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete without glazing bars, dove-tailed or welded complete all as specified and directed.

S&F galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staple complete all as specified and directed.

S&F 3.00mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, complete all as specified and directed.

S&F Factory made solid panel pvc door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined to-gether with solvent cement as per specification complete all as specified and directed.

S&F aluminium, anodised, barrel tower bolts of extruded section of 150 mm long complete all as specified and directed.

S&F Aluminium handles, cast type, anodised of 150 mm size complete all as specified and directed.

S&F Butt hinge, Stainless steel of 100 mm size complete all as specified and directed.

M&L for non skid coloured ceramic tiles 7 to 8mm thick(Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or colour cement to match laiddown and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for glazed ceramic coloured tiles in vertical surfaces 450 x 350 x 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match laiddown and including 10 mm thick backing coat to receive tiles in CM 1:6 complete all as specified and directed.

S&F EWC vitreous china white combined pattern complete with internal fitting and soft seat cover complete all as specified and directed.

S & F Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed.

S & F for urinal partition marble makrana white of size 310x700 mm complete , all as specified and directed.

S&F bib taps cast copper alloy 15mm size, crutch or butterfly handle, screwed down, screwe for iron pipe chromium plated complete all as specified and directed.

S&F tubes, medium grade, 15mm bore, galvanised with all fittings complete to walls and ceiling or laid in floors complete all as specified and directed.

S&F tubes, medium grade, 20mm bore, galvanised with all fittings complete to walls and ceiling or laid in floors complete all as specified and directed.

S&F brass chromium plated angle valve/stop valve 15mm size complete all as specified and directed.

S&F 10 litre capacity low level valveless PVC syphonic action type flushing cistern white with inlet ball valve float and handle complete all as specified and directed..

S&F rotational moulded polyethylene water storage tank(cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I, 500 ltr capacity including suitable brass float valve complete all as specified and directed.

S&F mild steel sliding door bolts, 300mm long, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.

S&F vitreous china WHB white flat black size 550 x 400mm including brass CP 15mm dia pillar tap, 32mm dia waste pipe with CP waste coupling bracket etc complete all as specified and directed.

S & F 15mm pillar taps, brass chromium plated with capstan heads, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts screwed for iron pipe or for union and fixed to 15mm bore pipe, complete all as specified and directed.

S&F PVC(SWR) pipes 110mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F PVC(SWR) pipes 110mm bore single socketed, in any length with rubber ring joints, fixed to walls complete including fixing clamps complete all as specified and directed.

S&F PVC(SWR) bends 110mm bore any radius complete all as specified and directed.

S&F PVC(SWR) floor trap, 75mm bore, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F PVC connections 15mm size, 450mm long with PTMT nuts complete all as specified and directed.

M&L 150mm dia salt glazed stoneware drain pipes laid in trenches and jointed complete all as specified and directed.

M&L for cement concrete 1:3:6, type C2 concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested in 150mm dia pipe complete all as specified and directed.

S&F gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe, 20mm bore complete all as specified and directed.

S&F brass chromium plated stop vlave 15mm bore, fancy type, with long shank and cup (concealed type), screwed both end for iron pipe or for unions complete all as specified and directed.

M&L for preparing ,cleaning new concrete/plastered surface and applying evenly a tack coat @1.20 kg/sqm with 85/25 industrial bitumen over a coat of bitumen primer @ 0.30 liter/sqm and laid with APP modified polymeric water proofing membrance with non-woven polyester rainforced and applying a tack coat of 85/25 industrial bitumen @ 1.2 kg per sqm and finish the surface with aluminium paint at top @ 0.2 kg/sqm as per manufacturer's instructions. Weight of membrane shall not be less than 3.0 kg/sqm unrolled and bonded to substrate with side and end laps 75mm & 100mm as per manufacturer's instructions. complete all as specified and directed.

M/S Keshav Brothers (BID ID -3063447)

mohanlal gupta (BID ID -3065656)

Rajneesh Jain (BID ID -3073081)

Manglam Engineers and Construction Co (BID ID -3064773)

SA construction co. (BID ID -3073067)

Arun Construction Co. (BID ID -3065415)