Construction of JNV at Hawai, Anjaw District, Arunachal Pradesh and Execution of additional works

Amount

SH:- Integrated Play Ground

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. .All kinds of soil.

1:5:10 (1 Cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources)

1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

1:1½:3 (1 cement : 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).

Providing and laying Acrylic Flooring as per standard spaecification and as per direction of engineer in charge

Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. Made of G.I. wire of dia. 4 mm, PVC coated to achieve outer dia not less than 5 mm in required colour and shade

Hand Operated Hydralic moovable basket ball system with 20mm Acrylic board with double die made frame aluminium anodized with built in bracket sfor mounting, dunking rims,3.2M protection from base pole, specila non marketing wheels

Vollyball poles with over lapping system for height adjustment with stand , net etc

Hnadball Goal post Poles( Movable)-Hand pole size ( 3M Height, 2 M width) front fascia of 80mm dia of MS pipe 3.2M +0.1mm wall thickness with rear pipes of 40mm dia with hooks for holdng nets at the rear along with wheels

Electrification

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group C

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required. 4 X 2.5 sq. mm + 2 X 2.5 sq. mm earth wire

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 8 way (4 + 24), Double door

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C”curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supply, Installation and Commisioning LED Flood Light 60W with Wall Bracket and all necessary fittings required. Make Crompton, Havells, Bajaj.

SH: Double Tier Steel Bed ( Additional)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand)

12 mm cement plaster of mix : (1 cement: 4 fine sand)

15 mm cement plaster on the rough side of single or half brick wall of mix : (1 cement: 4 fine sand

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. 10.16.2 Hot finished seamless type tubes.

Providing and fixing 25 mm thick shutters for cup board etc. : Panelled or panelled & glazed shutters : Superior class teak wood including nickel plated bright finished M.S. piano hinges with necessary screws.

Providing and fixing carbon steel galvanised ( minimum coating 5 micron) dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head, comprising of 10 mm dia polyamide PA 6 grade sleeve, including drilling of hole in frame , concrete/ masonry, etc. as per direction of Engineer-in-charge. 10 x 80 mm

Particle Board 12 mm thick 9.7.5.1 Plain particle board flat pressed, 3 layer or graded wood particle board medium density Grade I, IS : 3087 marked

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : New work (two or more coats) over and including water thinnable priming coat with cement primer

SH:Toilet Block ( Additional) 2 Block

Earth work in excavation in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50m. All Kinds Of Soil

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth: consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.

Supplying and filling in plinth with river sand under floors including, watering, ramming consolidating and dressing complete.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering -All work upto plinth level. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size

Providing and laying damp-proof course 40 mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size)

Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally with apiece of cloth lightly soaked in kerosene oil.

Centring and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns, etc., for mass concrete.

Lintels, beams, plinth beams, girders, bressumers and cantilevers.

Columns, Pillars, Piers, Abutments, Post and struts

Suspended floors, roofs,landings, balconies and access platform

Reinforcement for RCC work including straightening, cutting,bending, placing in position and binding all complete. Thermo-Mechanically Treated bars.

Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete work including pumping of concrete to site laying but excluding the cost of centring, shutter All work upto plinth level -1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size de rived from natural sources

All work from plinth level upto floor V level. Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources

Brick work with bricks of class designation 75 in foundation and plinth in cement mortar 1:6 (1 cement : 6 coarse sand)

Brick work with common burnt clay machine moulded perforated bricks of class designation 12.5 conforming to IS: 2222 in superstructure above plinth level up to floor five level in cement mortar 1:6 (1 cement : 6 coarse sand) : 6.3.1 With F.P.S.(non modular) bricks

Extra for Brick work in superstructure above plinth level upto floor V level

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level./Cement mortar 1:4 (1 cement :4 coarse sand)

Extra for half brick masonry in superstructure above plinth level upto roof floor level

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). 9.1.1 Second class teak wood

Providing and fixing panelled or panelled and glazed shutter for doors, windows and clerestory windows excluding ISI mark black enamelled M.S. butt hinges with necessary screws excluding panelling which will be paid separately. 35mm thick Kiln seasoned and chemically treated hollock wood.

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) 30 mm thick

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid separately) 9.5.1 Second class teak wood - 35 mm thick shutters

Providing and fixing M.S. grills of required pattern in wooden frames of windows etc. with M.S. flats, square or round bars etc. all complete.Fixed to steel windows by welding

Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete: 300 x 16 mm

Providing and fixing ISI marked oxidised M.S.tower bolts black finish (Barrel type) with necessary screws etc. complete: 250 x 10 mm

Providing and fixing aluminium hanging floor door stopper anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour and shade with necessary screws etc. complete. Single rubber stopper

Providing and fixing oxidised M.S. hasp and staple (Safety type) conforming to IS : 363 with necessary screws etc complete.-90mm

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering -All work upto plinth level. 1 : 5 : 10 ( 1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size )

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of 1 : 4 ( 1 cement : 4 coarse sand). 25 mm thick

Kota stone slabs 20 mm thick in risers of steps skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.

12 mm cement plaster of mix: 1:4 (1 cement : 6 fine sand)

15 mm cement plaster on rough side of single or half brick wall of mix : 1:4 (1 cement : 6 fine sand)

6 mm cement plaster to ceiling of mix: 1:3 (1 cement : 3 fine sand)

Providing and applying plaster of paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete

Finishing walls with water proofing cement paint "Snowcem-plus" of M/s Snowcem India Ltd. or equivalent of required shade. New work (two or more coats applied @3.84kg/10 Sqm)

Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. New work (two or more coats) over and including priming coat with cement primer

With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/steel works

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work

Varnishing with varnish of approved brand and manufacture : -Two or more coats of glue sizing with copal varnish over an under coat of flatting varnish

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. (internal work) Exposed on wall 15 mm dia. nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. (external work): 20 mm dia. nominal bore

Providing and fixing brass bib cock of approved quality conforming to IS : 8931 15 mm nominal bore

Providing and fixing Brass shower rose with 15 or 20mm inlet 100mm diameter

Providing and fixing brass stop cock of approved quality -15 mm nominal bore

Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, Parryware/Hindware/Seabird/Orient (Coral) with all fittings and fixtures complete including cutting and making good the walls and floors wherever required. White vitreous china Orissa pattern W.C. pan of size 580 x 440 mm with integral type foot rests.

Providing and fixing soil, waste and vent pipes: Centrifugally cast (spun) iron S&S pipe 100 mm dia.

Providing and fixing wash basin with C.I./M.S brackets, 15 mm C.P. brass pillar taps, Kingston/Gem/Techno/Parko, 32mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required A)White vitreous china Flat back wash basin size 550 x 400 mm with single 15 mm C.P. brass pillar tap.

Providing and Fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fitting complete.-Flexible pipe- 32 mm dia

Providing and fixing mirror thickness of required shape and size with plastic moulded frame of approved make and shade with 6mm thick hard board backing Rectangular shape 453 x 357 mm

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps omplete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : One urinal basin with 5 litre white P.V.C. automatic flushing cistern

Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75 mm bed of dry brick ballast 40 mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth.

Providing, laying and jointing glazed stoneware pipes Gr. A with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete. 250 mm diameter

Providing and laying cement concrete 1:5:10 (1cement :5 coarse sand : 10 graded stone aggregate 40 mm nominal size) alround S.W./RCC pipes including bed concrete as per standard design : 250 mm dia.S.W. pipe

Constructing brick masonry manhole in cement mortar 1 : 4 (1 cement : 4 coarse sand) R.C.C. top slab with 1 : 2 : 4 mix (1 Cement: 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1 : 4 : 8 mix ( 1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size ) inside plastering 12mm thick with cement mortar 1 : 3 ( 1 cement : 3 coarse sand ) finished with floating coat of neat cement and making channels in cement concrete 1 : 2 : 4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) finished with a floating coat of neat cement complete as per standard design. Inside size 90 x 80 cm and 45 cm deep including C.I. cover with frame (light duty) 455 x 610 mm internal dimensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) With F.P.S. bricks with class designation 75

Constructing brick masonry road gully chamber 50x45x60 cm with bricks of class designation 75 in cement mortar 1 : 5 ( 1 cement : 5 fine sand ) including 500x450mm precast R.C.C. Horizontal grating with frame complete as per standard design : with F.P.S. bricks

Constructing brick masonry road gully chamber 50x45x60 cm with bricks of class designation 75 in cement mortar 1 : 5 ( 1 cement : 5 fine sand ) including 500x450mm precast R.C.C. Horizontal grating with frame complete as per standard design : with F.P.S. bricks

Constructing brick masonry road gully chamber 50x45x60 cm with bricks of class designation 75 in cement mortar 1 : 5 ( 1 cement : 5 fine sand ) including 500x450mm precast R.C.C. Horizontal grating with frame complete as per standard design : with F.P.S. bricks

SH: Boundary wall

Earth work in excavation over areas (exeeding 30 cm in depth , 1.5m in width as well as 10 sqm on plan ) including disposal of excavted earth , lead upto 50 mtrs and lift upto 1.5 m , disposed earth to be levelled and neatly dressed. In ordinary rock

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering -All work upto plinth level 1:5:10 ( 1Cement 5 course sand :10 graded stone aggregate 40 mm nominal size.

Filling available excavated earth (excluding rock ) in trenches , plinth , sides of foundation etc. in layers not exeeding 20 cm in depth , consolidating each deposited layer by ramming and watering , lead upto 50 m and lift upto 1.5 m.

Providing and laying in position specified grade of reinforced concrete concrete excluding the cost of centering , shuttering , finishing and reinforcement -All work upto plinth level . 1:2:4 ( 1Cement 2 course sand :4 graded stone aggregate 20 mm nominal size.

Reinforcement cement concrete work in walls (any thickness ) including attached pilasters , butresses , plinth and string courses , fillets , columns, pillars, piers, abutments, post and struts etc up to floor two level upto floor five level excluding cos 1:2:4 ( 1Cement 2 course sand :4 graded stone aggregate 20 mm nominal size.

Centring and shuttering including strutting, propping etc and removal of form work for :1) Foundation, footings, bases of columns etc. and mass concrete.

Column, pillars, posts and struts etc.

lintel , Beam etc.

Reinforcement of RCC work including straigtening,cutting ,bending, binding and placing in position and binding all complete. a) Mild steel and medium tensile steel bars.

Brick work with Modular bricks of class designation 75 in foundation and plinth in Cement Mortar 1:6 ( 1 Cement 6 Sand)

Brick work with FPS Bricks of class designation 75 conforming to IS 2222-1991 in Suprstructure above plinth level up to floor V level in Cement Mortar 1:6 ( 1 Cement 6 Sand)

12 mm cement plaster 1 : 6 (1 cement : 6 fine sand) on the rough side of single or half brick wall.

Colour washing such as green, blue or buff on new work (two or more coats) including a base coat of white washing with lime to give an even shade. new work two or more coats with base coat of white washing with lime.

supplying at site Angle iron post 50 x 50 x 6 & struct of required size including bottom to be split and bent at right angle in opposite direction for 10cm length and drilling holes upto 10mm dia .etc complete.

Providing and fixing of Concertina coil

Muhilum Pul (BID ID -7932)