PROVN OF TRAINING SHED FOR 01 MARATHA LI AND WELDED MESH COVER FOR OPEN WATER TANK AT 257 FD WKSP COY AT AUNDH UNDER GE MH AND RH KIRKEE

Amount

Excavation in trenches n. exc 1.5m wide & 1.5m deep and getting out in hard/ dense soil all as specified.

Excavation in trenches n. exc 1.5m wide & 1.5 m deep and getting out in soft/ disintegrated rock all as specified.

Excavation in trenches n. exc 1.5m wide & 1.5 m deep and getting out in hard rock by chiseling/mechenical means complete all as specified.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in hard/ dence soil all as specified.

Excavation in post holes each n. exc. 0.50Cum, getting out in soft/loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n. exc. 25cm, watering and removing surplus soil to a distance n. exc. 50m and making good surface.

Surface dressing not exceeding 15cm in depth in soft/loose soil.

Returning, filling, including spreading, leveling watering and well ramming in layers n. exc. 25 cm getting out in hard/dense soil.

Removing of surplus soil to a distance n exc 50 m and depositing where directed at a level n exc 1.50 m above the starting point.

Removing excavated material to a distance exc 250m but n. exc. 500m and depositing where directed

M&L for PCC 1:4:8, type D2 (40 mm graded aggregates) as in foundation, filling & mass concrete.

M&L for PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in foundation of cols, bdy pillars, posts, struts, etc. filling and mass concrete complete all as specified and shown on drawing.

M&L for M25 RCC ( Design Mix ) using 20mm graded aggregate as in Foundations, including footings, foundation beam, plinth beam, base of coiumns, etc and mass concrete complete all as specified and as directed

M&L M25 RCC ( Design Mix ) (20mm graded aggregate ) Columns, pillars, piers, posts and struts etc.all as specified and directed

M&L M25 RCC ( Design Mix ) (20mm graded aggregate ) as in beams, cantilevars, bressummers, lintels over 1.5m span all as specified and directed

Formwork to sides of concrete fdns, footing, base of columns raft and raft beams sides and soffites of fdn and plinth beams and similar works vertical or to batter (for rough finished surfaces)

Formwork to sides of columns for rough finished surfaces of concrete, square or rectangular or polygonal shape

Formwork to sides and soffits of floor or roof beams, lintels, cantilevers, tie beams etc. Also splays between floors and beams, etc. on flat rough surface

M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surface finished even & fair all as specified and directed by EIC

M&L for rendering 10mm thick on fair face of brick or concrete surface of walls in CM 1:6 finished even and smooth without using extra cement all as specified and directed by EIC

M&L Mild steel TMT bars 10 mm dia. and over, cut to length bend to shape required incl cranking bending spirally for hooping for columns hooking ends and binding with and incl mild steel wire (annealed) not less than 0.9 mm dia

All as per item no. 20 above but 6 to 8 mm dia TMT bars.

All as per item no. 20 above but 6 to 10mm dia in stirrups, spacers and binders

M&L for PCC solid block masonary exc 10cms in width built in CM 1:6 of grade1:3:6 all as specified.

M&L providing cement concrete 1:3:6 type C1 as in coping, filleting etc all as specified and directed

M&L moorum/ red bajari filling in floor or paving laid in layers n.exc., 15cm thick spread levelled and rolled including watering

M&L for hard core of gauge n. Exc. 63mm, with broken stone or boulders deposited , spread, levelled in layers n. exc. 15cm thick , watered, rammed rolled to a true surface.

M&L for PCC 1:4:8 type D2 ((40mm graded aggregate) as in floor, subbase of 75mm thick all as specified and directed.

M&L for PCC 1:2:4 type B1 ((20mm graded aggregate) as in floor of 75mm thick finished even and smooth without using extra cement all as specified and directed

M&L for Forming Construction joint 30mm deep x 10mm wide filled with sealing compound grade 'B' all as specified.

M&L for preparation of newly plastered surfaces and applying two coats of cement base paint on a coat of primer as on outer wall of bidgs of any height all as specified and directed

M&L for preparation of newly plastered surfaces and applying three coats of white wash on inside wall all as specified

S&F MS sections of , gde Fe-410-W(Gde-E-250) as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing ( Beam, tee, angle, channel or flat sections ) including distance pieces, cleats etc.

S&F mild steel Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doo0rs etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Fe 410-W (Gde E-250) quality A

S&F Mild steel for posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 410-0 or Fe 310-0

S&F Mild steel bolts dia. Of neck in mm exc 12mm and n. exc 20mm purpose made with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut exc 30cm long

S&F 10mm dia n. exc. 50mm long MS Screw bolt machine made with Hexogonal or Square head at one end and screwed the other screwed end and fixed with washer complete all as specified and as directed.

S&F MS plates (plain or chequered) of gde Fe-410-W (Gde-E-250) , channels,square cut or notched (ordinary and counter sunk) forming holes, without any attachment

S&F Pre-painted gavalume aluminum zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550Mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified

S&F Pre-painted gavalume aluminum zinc coating GI based plain steel sheet 0.5mm thick of any colour having tensile strength of 550Mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified

M&L for 75 mm thick PCC 1:3:6 , type C1 ( 20mm graded aggregates) as in path. plinth protection all as specified

Fixing only chain link fencing 3.1 mm dia galvanised steel 0.075mm x 0.075 mm mesh screwed fixed to steel post complete as specified and as directed.

Supply only chain link MS galvanised fencing any type and size all as spd and directed by EIC

S&F Welded steel wire fabric supplied and fixed complete to wood or steel members weight should not exc 4Kg per Sqm

S&F 10mm dia Ms Round bar for securing chain link fencing including bending, bolting etc confirming to Fe 290 Gde E 165 complete all as specified and directed by Engr - in - Charge.

M&L fo Sand filling under floors or in foundation including watering and consolidation

M & L Machine pressed precast concrete interlocking paver block any shape and size conforming to IS 15658-2006 of 80 mm thickness M-40 Grade with grey cement and pigment any shape and size as specified and as directed by Engr in Charge.

M&L for preparetionof steel surfaces of any description, over 10 cm in width or girth, not otherwise described and painting with two coat of synthetic enamel paint on a coat of red oxide primer

M&L for two coats of synthetic enamel paint over a coat of red oxide primer on steel surfaces of any description n exc 10 cm in width or girth not otherwise described including preparation of old steel surface

M & L for point wiring complete with and including 1.5 sqmm (nominal area) single core multi stranded copper conductor PVC insulated but unsheated cable 1100 Volts drawn through PVC conduit ISI mark suitable size incl accessories such as tee, bend ,elbow, including 1.5 sqmm PVC insulated and PVC unsheathed single core multistranded copper conductor cable 1100 V grade as earth wire including metal box with 3 mm thick laminated sheet of suitable size for housing switch ,socket,regulators etc complete for One light point controlled by one switch

All as per item No 48 above but One Fan point controlled by one switch

All as per item No 48 above but One 5 pin 6 Amps socket outlet on independent board.

All as per item No 48 above but One 5 pin 6 Amps socket outlet on same board.

All as per item No 48 above but wiring with 2.5 sqmm single core multi stranded copper condcutor 1100 v grade PVC insulated but unsheheted single core multi stranded pvc insulated unsheathed copper conductor cable 1100 volts grade for 16 Amps power point on independent board and 1.5 sqmm cable as earthwire.

S & F switch piano type 250 volts single pole one way 6 Amps all as specified and directed

S & F socket outlet 5 pin 6 Amps shuttered flush type all as specified and directed.

S & F socket outlet 2 in 1, 3 pin, 6 and 16 Amps flush type all as specified and directed.

S & F switch piano type 250 volts single pole one way 16 Amps all as specified and directed.

S & F PVC ceiling rose / Angle Holder / Batten Holder surface type three terminals type all as specified and directed.

S & F fan regulators electronic step type suitable for 1200/1400 mm sweep ceiling fans.

S & F Circular LED High bay 70 Watt with tapered fin design and excellent thermal management along with IP 66 protection of Cromptonfitting confirming to Cat No LHB11-70-CDL /60 of Crompton. Make: Equivalen make of Bajaj/Havells/Philips

S & F distribution board factory made SPN 8 way in, 240 Volt, Double door metal type suitable for fixing MCBs as out going and including SPN MCB 32 Amps as main incoming all as specified & directed. Make; Legrand / L&T / ABB. Note; Cost of MCBs will be measured and paid seperately.

S & F MCB SP 5 to 30 Amps 'B' series 10 KA with two position DIN Rail clamp. Make; Legrand / L&T / ABB.

S & F MCB DP 32 Amps 'B' series

M & L for earthing complete with galvansihed steel earth plate electrode 600 mm x 600 mm x 6.3 mm thick buried directly in ground (earth pit not less than 3.25 m deep below ground level) with top edge of plate not less than 1.5 m below normal ground level connected to 4.0 mm dia galvansihed earth lead wire by means of nuts bolts check nuts and GI washers including PCC pit in PCC 1:2:4 type B-1 RCC cover 20 mm dia (medium grade) GI watering pipe with funnel wire mesh and protection pipe of GI of suitbale size upto 7.5 mtr length including charcoal black cotton soil as required at site to achieve the earthing result and common salt, excavation earth work etc in any type of starta complete all as shown in electrical palte No 3 of SSR part-I, GI wire suitable size and length for continuity earth wire from test point to main distribution Board and all as directed. (Note: Rate for achieving required depth by compressor machine/breaker if required is deemed included in item unit rate.)

Supply & fix fans ceiling complete with electronic type regulator and accessories 230 V,1200 mm sweep. BEE 5 star rated

M/S JAYCONSTRUCTION CO

V.R.PRAJAPATI AND CO.

A S Shingote