Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹15.5 LAccepted-AOC AT KALINGA VIHAR VIA PATRAPADA DIST KHURDA | KHURDA | ODISHA | L1 | Accepted-AOC Contract value is excluding GST | |
| 2 | L2₹25.1 L+₹9.6 L (62.0%)Rejected-Finance 97 LABOUR TENEMENT PO CHARBATIA CUTTACK 754028 | CUTTACK | CUTTACK | ODISHA | 754028 | L2 | Rejected-Finance Quoted amount excluding GST |
Tender Value
Refer Docs
EMD Value
₹30,000
Closing Date
3 Mar 2023, 5:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
General Manager (M), E and M
Office of the General Manager (M), E and M,Central Workshop, Rasulgargh, BBSR
Erection,commissioning, testing of 05 sets of Cross Regulator Gates and 04 sets of Escape gates of Kanupur Gate Erection Project
2023_OCCL_86407_1
E-Procurement Notice No.56/OCCL/2022-23 (on-line)
Open Tender
Mechanical Works
Item Rate
120 days
Basudevpur, Keonjhar
Please refer Tender documents
3 documents required · 3 mandatory
₹7,080
₹30,000
General Manager (M), E and M, Rasulgargh, BBSR
25 Jul 2023
22 Feb 2023
4 Mar 2023
22 Feb 2023
3 Mar 2023
22 Feb 2023
22 Feb 2023 - 25 Feb 2023
27 Feb 2023
Amount
KANUPUR CR AND ESCAPE GATE
Erection, Commissioning, Testing of 05(five) sets of Cross Regulator Gates of size 2830mm x 2350mm with 2nd Stage Embedded Parts and their screw hoists & 04(four) sets of Escape Gates of size 3000mm x 2350mm with 2nd Stage Embedded Parts and their screw hoists
2nd stage concreting of embedded parts of 05(five) sets of Cross Regulator Gates of size 2830mm x 2350mm & 04(four) sets of Escape Gates of size 3000mm x 2350mm by M25 grade concrete using 20mm and down grade agregates.
Painting 05(five) sets of Cross Regulator Gates of size 2830mm x 2350mm & 04(four) sets of Escape Gates of size 3000mm x 2350mm after blast cleaning process performed with as per requirements & class 'A' of IS 14177: 1994.After blast cleaning, the surface should be cleaned from loose dust & debris by air blast with help of blower. Over the prepared surfaces, the upstream side one/two coats of zinc rich or any suitable primer shall be adopted to obtain 75 microns film thickness when dry 03 coats of finishing with the coal tar epoxy paints shall be followed to ontain minimum 100 microns dry film thickness in each coat allowing re-coating tme of 24 hours. Depending on the nature of requirements, 3rd coat of finishing may be applied at site. For down stream side after 01 coat of primer with red lead or zinc chromate primer dry film thickness of minimum 45 microns, 03 coats of highbuild micaceous iron oxide paint shall be applied to obtain minimum 85 microns in each coat including compressor, paints, thinner, painting equiments, labour, other machinery, scaffolding etc.
Painting of Screw Hoists of 05(five) sets of Cross Regulator Gates & 04(four) sets of Escape Gates after blast cleaning process performed with as per requirements & class 'A' of IS 14177: 1994. After blast cleaning, the surface should be cleaned from loose dust & debris by air blast with help of blower. Over the prepared surfaces, 01 coat of red lead primer should be applied to give a total dry film thickness of 45 microns followed by 02 coats of alluminium paint applied at an interval of 24 hours between each coat. Each coat should give a minimum dry film thickness of 85 microns, including compressor, paints, thinner, painting equiments, labour, other machinery, scaffolding etc.
UTTAM KUMAR ACHARYA
stage.html
html • 0.04 MB
techsummary_429577.pdf
PDF • 0.51 MB
finsummary_429577.pdf
PDF • 0.51 MB
A56.pdf
PDF • 21.99 MB
BOQ Comparative Chart
xlsx • 0.01 MB
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .