REPAIR AND MAINTENANCE OF INTERNAL ELECTRICAL INFRASTRUCTURE AT 7AFH KANPUR

Amount

Taking down carefully/aluminium point wiring (light, fan, socket or power point ) complete including fitting such as hylem sheet switches, ceiling rose, pendent holder sockets, regulator s including wooden battern/conduit/PVC casing caping etc. and sunken boxes etc and making good distrubed surfaces of wall and floors etc to match with the existing, complete all as specified and directed by Engineer-in-charge.

M & L for concealed modular point wiring for light /Fan point ,5/6 Amp complete with 1.5 sqmm (nominal cross section area ) FRLSH PVC insulated unsheathed and multi strand copper conductor cable 1100 volt (ISI marked ) of make specified drawn through and including PVC rigid conduit 20mm dia ( heavy duty ) with all fittings and all accessories i.e pipe bend pipe hook, elbow,junction box, pressed steel powder coated sunken box suitable for mounting modular switches and sockets , fan regulator, for light/fan point /exhaust fan point controlled by one switch, top cover fixed with brass screws & cup washers including provn of 1.5 sqmm FRLSH PVC insulated multi strand copper conductor wire continues as earth wire connected to earth dolly , and provision of suitable module plate ,plate cover etc including cutting chases in wall and making good distrubed surface of wall/ceiling/floors etc by using CM (1:3 ) to matching with existing surface complete all as specified and as directed by Engineer-in-charge. Note:- 1.Where ever the wall surfaces disturbed due to cutting of wall for insertion of conduit that wall to be finished with cement mortar and putties as per matching of existing colour and cement work included in the quoted rate.

All as per item No 2 here in before but for socket outlet 5 pin 5/6 Amp on same board, complete all as specified and directed by Engineer-in-charge.

All as per item No 2 here in before but for socket outlet 5 pin 5/6 Amp on independent board but not below the switch board, complete all as specified and directed by Engineer-in-charge.

All as per item No 2 here in before but for socket outlet 6 pin, 15/16 Amp multi purpose, 2 in 1 on independent board with 2.5 Sqmm cable & including 2.5 sqmm single core multi stranded FRLSH copper earth wire to common earth, complete all as specified and directed by Engineer-in-charge.

All As per item No 2 in before but for bell/buzzer point, using 1.5 Sqmm multi stranded PVC FRLS copper conductor wire complete all as specified and directed by Engineer-in-charge.

S&F modular Switch 1 way 6A ,1 module 240 volts AC one way ISI, marked of make specified and directed.

S&F modular Switch 1 way 16 A,1 module 240 volts AC ISI marked of make specified and directed.

S&F modular Socket 6 A-2/3 pin combined 2 module shuttered 240 volts AC ISI, marked of make specified and directed.

S&F modular Socket 6A/16A-3/5 pin combined,2 module 240 volts AC shuttered ISI marked of make specified and directed.

S&F modular Bell push, piano flush type, 6 amp 240 Volts ISI marked of make specified and directed.

S&F modular type fan regulator 120W,240 Volts , 2 module, complete all as specified and directed by Engineer-in-charge.

M & L for concealed point wiring complete with 1.5 sqmm for light/Fan point (nominal cross section area ) FRLSH PVC insulated unsheathed and multi strand copper conductor cable 1100 volt (ISI marked ) of make specified drawn through and including PVC rigid conduit 20mm dia( heavy duty ) with all fittings and all accessories i.e pipe bend pipe hook, elbow,junction box, pressed steel powder coated sunken box suitable for hylum sheet cover of 3mm thick for mounting piano type switches and sockets , fan regulator, for light/fan point /exhaust fan point controlled by one switch, top cover fixed with brass screws & cup washers including provn of 1.5 sqmm FRLSH PVC insulated multi strand copper conductor wire continues as earth wire connected to earth dolly , including cutting chases in wall and making good distrubed surface of wall/ceiling/floors etc by using CM (1:3 ) to matching with existing surface complete all as specified and as directed by Engineer-in-charge. Note:- 1.Whereever the wall surfaces disturbed due to cutting of wall for insertion of conduit that wall to be finished with cement mortar and putties as per matching of existing colour and cement work included in the quoted rate.

All as per item No 13 here in before but for socket outlet 5 pin 5/6 Amp on same board, complete all as specified and directed by Engineer-in-charge.

All as per item No 13 here in before but for socket outlet 5 pin 5/6 Amp on independent board but not below the switch board, complete all as specified and directed by Engineer-in-charge.

All as per item No 13 here in before but for socket outlet 6 pin, 15/16 Amp multi purpose, 2 in 1 on independent board with 2.5 Sqmm cable & including 2.5 sqmm single core multi stranded FRLSH copper earth wire to common earth, complete all as specified and directed by Engineer-in-charge.

All As per item No 13 in before but for bell/buzzer point, 5/6 Ampcomplete all as specified and directed by Engineer-in-charge.

M & L for surface casing caping point wiring complete with 1.5 sqmm for light/Fan/Ceinig rose point (nominal cross section area ) FRLSH PVC insulated unsheathed and multi strand copper conductor cable 1100 volt (ISI marked ) drawn through and including PVC casing and caping suitable size with all fittings and all accessories i.e bend , elbow,junction box, pressed steel powder coated sunken boxe of suitable for hylum sheet cover of 3mm thick for mounting piano type switches and sockets , fan regulator, for light/fan point /exhaust fan point controlled by one switch, top cover fixed with brass screws & cup washers including provn of 1.5 sqmm FRLSH PVC insulated multi strand copper conductor wire continues as earth wire connected to earth dolly , including cutting chases in wall and making good distrubed surface of wall/ceiling/floors etc by using CM (1:3 ) to matching with existing surface complete all as specified and as directed by Engineer-in-charge. Note:- 1.Whereever the wall surfaces disturbed due to cutting of wall for insertion of conduit that wall to be finished with cement mortar and putties as per matching of existing colour and cement work included in the quoted rate.

All as per item No 18 here in before but for socket outlet 5 pin 5/6 Amp on same board, complete all as specified and directed by Engineer-in-charge.

All as per item No 18 here in before but for socket outlet 5 pin 5/6 Amp on independent board but not below the switch board, complete all as specified and directed by Engineer-in-charge.

All as per item No 18 here in before but for socket outlet 6 pin, 15/16 Amp multi purpose, 2 in 1 on independent board with 2.5 Sqmm cable & including 2.5 sqmm single core multi stranded FRLSH copper earth wire to common earth, complete all as specified and directed by Engineer-in-charge.

All As per item No 18 in before but for bell/buzzer point, 5 Amp complete all as specified and directed by Engineer-in-charge.

S&F piano switch 1 way 6 A, 240 volts AC ISI marked of make specified complete all as specified and directed by Engineer-in-charge.

S&F for socket flush type 6 Amp 5 Pin complete complete all as specified and as directed.

S&F for switch socket combination 5 Pin 6 Amp universal complete all as specified and as directed.

S&F for switch socket combination 5 Pin, 6/15 Amp universal complete all as specified and as directed.

S & F bell push, flush type, 5 amp complete all as specified and ad directed.

S & F ceiling rose, 3 way /PVC/Polycarbonate, isolated body complete all as specified and as directed.

S&F ceiling fan regulator electronic Step type, solid state, 120W, 2 module, 240 volts, complete all as specified and as directed.

S&F Lamp holder of PVC/Polycarbonate type with back plate suitable for batten fitting with and including 9 watt LED bulb, complete all as specified and directed by Engineer-in-charge.

M & L for submain wiring concealed complete with two single core 4 sqmm 1100 volts grade, PVC insulated multi stranded copper conductor cable FRLSH with continuous copper earth conductor of 4 Sqmm in and including PVC conduit size 20 mm complete all as specified and directed.

M & L for submain wiring concealed complete with two single core 6 sqmm 1100 volts grade, PVC insulated multi stranded copper conductor cable FRLSH with continuous copper earth conductor of 6 Sqmm in and including PVC conduit size 20 mm complete all as specified and directed.

S&F sheet metal enclosure for geyser connection box 20 Amps capacity (concealed with wall) single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of capacity Amps, 240 volts,, complete all as specified and directed by Engineer-in-charge. Note:- Whereever the wall surfaces disturbed due to cutting of wall for insertion of DBs and conduit that wall to be finished with cement mortar ,bricks and putties as per matching of existing colour and cement work included in the quoted rate.

S&F sheet metal enclosure for AC connection Box (Concealed with wall) single pole and neutral enclosure with a two pin and earth metal plug and socket complete with one double pole MCB of capacity 20 Amps, 240 volts,, complete all as specified and directed by Engineer-in-charge. Note:- Whereever the wall surfaces disturbed due to cutting of wall for insertion of DBs and conduit that wall to be finished with cement mortar ,bricks and putties as per matching of existing colour and cement work included in the quoted rate.

S&F metal enclousers made out of CRCA mild steel sheet, double door, powder coated DB Vertical TPN 4 way 415 Volt,(concealed in wall or as directed) dust and vermin proof including MCCB's 125Amp , 16KA complete all as specified and directed by Engineer-in-charge. Note:- Wherever the wall surfaces disturbed due to cutting of wall for insertion of DBs and conduit that wall to be finished with cement mortar ,bricks and putties as per matching of existing colour and cement work included in the quoted rate.

S&F sheet metal enclosure (concealed in wall or as directed) factory made DB (made out of CRCA sheet) SPN, 8 Way 240V, double door, earth bar, copper bus bar 200 Amp and neutral link, protection class IP-43 suitable for mounting MCB/Isolator, conforming to IS-8623, BS-5484 dust and vermin proof, including taking down unserviceable old DBs with its iron body covered box any type and size including MCB etc, taking down existing Electric meter from this iron box and arrangements of refixing existing this electric meter near this DBs, making good disturbed surfaces of walls as necessaty cement work complete all as specified and directed by Engineer-in-charge. Note:- 1. Wherever the wall surfaces disturbed due to cutting of wall for insertion of DBs and conduit that wall to be finished with cement mortar ,bricks and putties as per matching of existing colour and cement work included in the quoted rate.

S&F MCB TPN 40Amps to 63 Amps, C-Curve

S&F MCB TPN 32 AMPs, C-Curve

S&F MCB SPN 40 to 63 AMPs, C-Curve

S&F MCB SP 6 To 32 AMP, c-Curve

S&F isolator 32 Amps, 4 Pole, 415 Volts, 50 Hz

S&F isolator 40 Amps, 4 Pole, 415 Volts, 50 Hz

S&F MCCB, 100A, 4P, 415 Volts, 50 Hz, 16 kA thermal and magnetic release.

Supply & Installation of advance conductive compound based chemical compound technology with upgraded high tensile low carbon steel rod as per UL 467 and as per BS 7430 with copper coating 250 microns. Earthing system confirming to IS:3034. The ROD should 17.2 mm & 3 meter length with rod to tape clamp, CR 125 (type A) additional protection of the terminal. Chemical compound should be the highly Conductive Compound as per BSEN 50164-7 with 03 Bags of 25 kg each bag & resistivity should be 0.05 ohm. The job includes digging the pit and refilling the same by furse CEM back Fill Compound (Ground Enhancer), the BFC should be mixed with cement in 3:1 for forming conductive concrete and it should be eco friendly, not contain environmentally hazardous material/metal. The earth pit should be provided with a light weight inspection pit cover PT-205 for protection and safe guard of terminals. In areas where soil condition is bad Good earth is to be arranged to fill the excavated pits by mixing furse CEM- a convenient and permanent solution by adding with 3:1 ratio chemical compound with the earth electrode in the main component of the earthing system which is in direct contact with the ground and thus provides a mean of releasing or collecting earth leakage currents complete all as specified and directed by Engineer in Charge.

The material should have good electrical conductivity and anti corrosion property in wide range of soil conditions including takin down/dismantling of existing unserviceable earthing system complete all as specified & directed . (Make : ABB Furse RB 336 and CM040 or equivalent). (NOTE :-Each earth pit should contain:- a) 1 No. copper bonded high tensile low carbon steel,17.2 mm dia, 3 meter length. b) Rod to tape clamp (type A). c) 03 Bags of 25 kg each chemical compound as per BSEN 50164-7. d) Light weight inspection pit cover with 5000 kg weight load capacity. e) Supply and installation shall be done by the authorised technician of the manufacturer)

M&L earthing complete with copper plate electrode 60×60cm ×3.15mm thick electrode and (earth pit not less than 2.25 mtrs deep below normal ground level ) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to 20×3mm copper strip as burried directly in ground by means of brass bolts, nuts check nuts and brass washers earth plate surrounded by picked layer of coal dust and common salt 15cm thick all around bottom and top and watering pipe 20mm bore of GI pipe medium connected to funnel and 40mm bore GI pipe light grade for protection of copper earth strip 25 x 3mm from earth plate upto 7.5 metre and connecting to , main switch board including 10mm thick cast iron cover angle iron frame and PCC 1:2:4 type B-1 for concrete pit, including necessary excavation and earth works etc , as shown in electrical plate No 3 of SSR Part - I of 2009 and testing on completion all as specified. Note : PCC chamber shall be constructed at least 1.5m away from earth pit pipe for watering shall be provided in slanting manner.

M&L for replacement of lightening protection termination rod 12mm dia and of 30 cm long mounted on 5 mtrs long GI pipe of 40mm dia light grade, insulated from termination rod with the help of insulator, connected to down conductor and mounted on PCC foundation block (type B1, 1:2:4)of size 30 x 30x 60 cm complete all as specified and directed.

M&L and labour in replacement for aluminium strip of size 25mmx 3mm fixed to wall/surface on insulators and PCC blocks complete all as specified and directed.

M& L for earthing complete with GI earth plate electrode 60cm x60 cm x6.0 mm thick buried directly in ground (earth pit not less than 2.25 Mtrs deep below ground level) with top edge of the plate not less than 1.50 Mtr below normal ground level connected to galvanized earth lead strip 32x6mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No.3 of SSR Part-I (2009) connected to ear thing test point all as specified or indicated including testing on completion including PCC pit in (1:3:6) type C-2 cement concrete .RCC 1:2:4 Mix type B reinforced with 6mm dia MS bars @ 150mm RCC cover slab 40mm thick with two no’s fitting handle, GI pipe 20mm dia light grade with funnel & wire mesh for watering and 40mm dia light grade GI pipe for earth strip 32x6mm protection etc Earthing result not more then 2 ohm and test result duly signed complete all as specified and directed by Engr-in-Charge.

S&F in replacement of earth continuty conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe orn fiexed to poles or any indicated situation for loop earthing etc as required 32x6mm GI strip complete all as specified and directed

S&F 600x600mm recess mounted LED light fitting, 40 watt, with opaque diffuser for glare free light output and wired with all accessories, white/warm as per site requirement complete all as specified and directed.

S & F LED bed side reading light fitting 3 Watt, white/black power coated housing with movable string, metallic base, complete with driver to operate on 220 V AC 50 hz, suitable for indoor applications complete all as specified and directed.

S & F LED picture light 10 Watt, aesthetically designed with multiple body color, high efficiency LED, opaque diffuser, inbuilt driver, suitable for highlighting wall hangings complete all as specified and directed.

S & F Wall light 9 Watt for ambient lighting made from engineering grade polymer with prismatic diffuser, aesthetic design, suitable for LED bulbs complete all as specified and directed

S & F surface mountable LED down light 18 Watt made from cast aluminium housing and opaque polymer diffuser for optimum light output complete all as specified and directed

S & F weather proof LED post top pluto 12 watt with aluminium housing, clear acrylic housing , clear acrylic diffuser, aluminium pole cap complete with all accessories, suitable for OD 50mm pipe complete all as specified and directed

S & F LED bollard 9 watt mushroom shape, with B22/E27 bulb holder suitable for LED bulbs with B22/E27 caps, with cast aluminium housing & polymer diffuser for pleasant light output, weather proof, IP65 including bulb and foundation of PCC of size 30 x 30 x 30cm anf other fixing arrangement complete all as specified and directed

S & F LED Bldg security light fitting 30 watt cast aluminium housing, toughned glass diffuser, IP 65/66, 10 KV SPD, >100 lm/watt and wired with accessories complete all as specified and as directed

S & F LED flameproof light fitting 20 batten suitable for LED tube rod single application of hazardour area complete all as specified and as directed

S & F LED batten fitting 20 watt made out copolymer extrude channel, with opaque diffuser for glare free light with all accessories complete all as specified and as directed

S & F LED bulk head fitting12 Watt with cast aluminium housing , polycarbonate diffuser, IP65 suitable for various mounting, wall, ceiling, cradle, hook ect 240V AC complete all as specified and as directed

S & F LED column light 40 watt, 3 meter height, with cylendrical aluminium pipe housing, opaque diffuser made from engineering grade polymer for rugged outdoor application, IP65/66 complete all as specified and as directed

M & L for PVC insulated and FRLS 1.5 sqmm 3 core PVC Round Sheathed, Copper Conductor(flexible) industrial cable, 1100 Volt, conforming to IS 694 complete all as specified and as directed

M & L for PVC insulated and FRLS 2.5 sqmm 3 core PVC Round Sheathed, Copper Conductor(flexible) industrial cable, 1100 Volt, conforming to IS 694 complete all as specified and as directed

M & L for PVC insulated and FRLS 4.0 sqmm 3 core PVC Round Sheathed, Copper Conductor(flexible) industrial cable, 1100 Volt, conforming to IS 694 complete all as specified and as directed

M &L LED post top lantern 40 watt for indirect lighting, cast aluminium housing toughned glass OF 75mm pipe IP 65/66 complete all as specified and as directed

M& L for GI tubing light grade 40 mm complete with one coat of primer and one coat of acrylic paint complete all as specified and as directed

M & L for LED flood light 50 watt aluminium die cast with diffuser glass , polycarbonate LED cover, high power LEDs secondary optical lenses IP65/66, 10 KV SPD with all accessories complete all as specified and as directed

Taking down ceiling fan of 1200/1400mm sweep by unscrewing nut/bolts from its position and refixing the same to its original place after necessary cleaning, oiling, greasing, replacement of bush, bearing and marking MES number all as directed by Engr-in-charge. Note : Bush, bearing , measured and paid separately as supply only rates and fixing charges for spare parts shall deemed to be included in this item complete all as specified and as directed

Dismantling complete ceiling fan of size 1200/1400 mm sweep down rod with its canopies, shackle, condenser housing with its rubber bushes, split pins, unscrewing the body parts of ceiling fan, taking out starter, motor winding, ball bearing, gun metal bush etc. complete to carry out the following repairs :- (a) Removing of burnt out fan winding and re-winding of motor with suitable size of copper enamelled wire, varnishing, heating as per manufractures design and directed and re-assembling (b)New spare parts (i.e) rubber bush of shackle and condenser housing, gun metal bushes, ball bearing, twin twisted copper cable shall be measured and paid separately under relevant item.

S&F rubber bush for shackle with bolt, nut and lock pin suitable for ceiling fan 1200/1400 mm sweep.

S&F bearing number of 6201/6202/6203/6204 as required existing make all as directed.

S&F condenser 2/2.5 Mfd complete all as specified and as directed

S&F PVC holder for condenser housing complete all as specified and as directed

S&F twin core twisted copper flexible wire/cable of size 0.5 sqmm, single core complete all as specified and as directed

S&F gun metal bush complete all as specified and as directed

M&L for complete spray painting of exhaust fan of size 300/380mm sweep by scraping with brush / removing old spray paint with the help of paint remover chemical and spray painting with two coat of synthetic enamelled paint with super glossy finish (grey/brown) with the help of spray painting machine as directed by Engr-in-charge.

Dismantling complete exhaust fan of sizes 250/300/450 mm with its brackets rubber bushes, louvers and unscrewing the body parts of exhaust fan, taking out starter, motor winding, ball bearing, gun metal bush etc. complete to carry out the following repairs :- (a) Removing of burnt out Exhaust fan winding and re-winding of motor with suitable size of copper enamelled wire, varnishing, heating as per manufractures design and directed and re-assembling (b)New spare parts (i.e) rubber bush of shackle and condenser housing, gun metal bushes, ball bearing, twin twisted copper cable shall be measured and paid separately under relevant item here in before but exhaust fan complete all as specified and as directed

S&F condenser 3.15/4 MFD (metal body) as per existing make complete all as specified and as directed

S&F louvers of exhaust fan 300/450 mm sizes made out of GI sheet of appropriate thickness .Fixing of exhaust fan louvers should be done with the help of anchor fastener nut bolts complete all as specified and as directed.

S&F exhaust fan motor AC single Phase. 230V for size 250 mm , 85 watts sweep exhaust all as specified and directed

S&F exhaust fan motor AC single Phase. 230V for size 300 mm sweep , 150 watt exhaust all as specified and directed

S&F exhaust fan motor AC single Phase. 230V for size 450 mm sweep , 400 watts exhaust all as specified and directed

S&F blade made of iron suitable for Exhaust fan 250/300 mm sweep complete all as specified and as directed

S&F blade made of iron suitable for Exhaust fan 450mm sweep complete all as specified and as directed

Taking down / dismantling of defective / rusted storage type hot water gyser of 50/25 ltr capacity from different locations by disconnecting inlet / outlet connections and taking out unserviceable parts by unscrewing bolts and nuts etc deiscaling / cleaning inner servicing and etc. Checking defects, re-assembling and re-installing the gyser in position, connection and testing complete. Note: Rate for anchor bolts if required for reinstallation of hot water geyser should be included in the rates quoted.

S&F indication lamp (green / red) as required.

S&F thermostat of range 0-90 degree centigrade as required.

S&F heating element 2 KW (ISI Marked) cup type / thread type with the provision of thermal cut out as required.

S&F for PVC flexible pipes 15mm dia (heavy duty) both end socketed 450mm long for cold water complete all as specified and as directed

S&F hot water pipe for Gyeser, connection with check nuts and washers complete all as specified and as directed

S&F in replacement of gun metal non return valve of 15mm dia ISI marked complete all as specified and as directed

S&F in replacement of stop cock CP brass of 15mm dia complete all as specified and as directed

S&F gun-metal, globe or gate valves 15mm dia, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

S&F in replacement of GI tubing medium grade 15mm dia with all fittings and fixed to wall, ceiling or roof complete all as specified and directed.

S&F in repairs indoor assebmly suitable for 25 Ltrs capacity Geysers of any type made out of brass with inlet and outlet and fixing plate complete including gasket,nut bolts etc as required and as directed by Engr-in-Charge.

S&F in replacement of stainless steel inner tank 25 Ltr capacity Geysers factory manufactured as approved complete all as specified and directed.

Material and labour for Routine maintenance of Solar water heater plant (including any leakages in GI pipes/ replacement of air valve steel tank fixed in hot water tank/ replacement of float valve of cold water tank ) of Cap 100/200/300 /500 /1000 ltrs installed at single/ double/ triple story bldgs for preventing minor leakage using gasket of nitryl rubber of suitable thickness and size , cleaning of flat plate glass collector, cleaning / drain of water from hot and cold water tank and make up tank clean after disconnecting inlet and out let connections incl replacement of rusted nut bolts and washer of appropriate cap,rubber hose pipes and refixing the same at retrieved position after cleaning for proper functioning of the system to maintain proper water temperature, complete all as specified and as directed by Engineer-in-Charge.

S&F in replacement Flat plate collector up to and including of size 2033 mm x 1033mm x 100 mm ISI marked and as per site requirement, assembly suitable for solar water system existing size and capacity with copper tube black coat/radiation reflector film, aluminum toughed glass, complete all as specified and directed by Engineer-in-Charge.

S&F in replacement of HDPE rotational moulded polyethylene cylindrical vertical water storage tanks 500 Ltr cap (triple layered with closed top), conforming to specification of IS:12701-1996 with amendment No 1 and 2 (covered by fig 1) hoisted and fixed in position, including out let and inlet connection including supporting system stand suitable height of water storage tanks of any description and capacity complete complete all as specified and as directed by Engineer-in-Charge.

S&F in replacement of heating element 2000 watts push type with gasket ISI marked for solar water heater as per sample all as specified and directed.

S&F in replacement of thermostatic switch suitable for solar water heater of any make/ type with temperature range adjustable type 25 to 80 degree centigrade superior quality 20 Amps 220 Volts AC Supply complete all as directed.

S & F 1200mm ceiling fan, AEON BLDC PRO,white in color or as directed,curved blade design, metallic ring with chrome finish, standard size fan down rod with hanging arrangement, anti dust with remote control and min 5 year warranty complete all as specified and as directed . Note: Old Fan should be deposited to MES store.

santosh electronics (BID ID -3509815)

AARADHIRAJ ASSOCIATES (BID ID -3516153)

keerti trading corporation (BID ID -3511840)

M.M.V. CONSTRUCTIONS (BID ID -3512955)

M/S Asian Engineers (BID ID -3512697)

M/s Sohanil Construction (BID ID -3512481)

G S SANDHU & CO. (BID ID -3512909)