PROVN OF CHAIN LINK SECURITY FENCE FOR TRAINING AREA AND PROVN OF SINGLE LIVING ACCN FOR JCO AT RMS UNDER AGE B/R-II OF GE 868 EWS

Amount

Excavation in post holes n.exc. 0.5 Cum, getting out returning filling and ramming earth or broken ruble mixed with earth around, in layers not exc. 25cm, watering and removing/surplus soil to a distance n.exc. 50m and making good surface in soft/loose soil complete all as specified and directed by Engr-in-Charge

S&F Angle iron as in posts and struts for fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc flat iron fillets (for securing wire mesh etc) including all necessary drilling bolting or riveting etc and similar work conforming to Fe-290 gde E-165 complete all as specified and directed by Engr-in-Charge

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire, complete all as specified and directed by Engr-in-Charge

Supply only chain link MS galvanised fencing, any size or type complete all as specified and directed by Engr-in-Charge

M&L Cement concrete type D2 (1:4:8) (Using 40mm crushed graded stone aggregate) in foundations, filling and mass-concrete complete all as specified and directed by Engr-in-Charge

M&L Mild steel round bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips Fe-410W (Gde E-250) quality A or Fe-290 (Gde E-165) complete all as specified and directed by Engr-in-Charge

All same as per item No 6.00 above but 6mm to 8mm dia complete all as specified and directed by Engr-in-Charge

All same as per item No 6.00 above but 5mm dia and over and including 10mm dia in stirrups spacers and binders complete all as specified and directed by Engr-in-Charge

Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) but in wire entanglements, aprons, barries, gate etc complete all as specified and directed by Engr-in-Charge

S&F 12 mm dia Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5 cm long & n exc 10 cm complete all as specified and directed by Engr-in-Charge

M & L for preparation of new or previously untreated surfaces of steel of any description, n.exc 10cm in width or girth and applying two coats of aluminium paint over a coat of aluminium red oxide primer complete all as specified and directed by Engr-in-Charge

M&L two coats of aluminium paints to steel surfaces over a coat of aluminium red oxide primer exc 10 cm width or girth incl preparation of new surface complete all as specified and directed by Engr-in-Charge

Preparation of surfaces of steel and iron works treated with two coats of tar or coal tar black paint complete all as specified and directed by Engr-in-Charge.(Area exc. 0.1 Sqm but n. exc. 0.50 Sqm each)

M&L for surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in soft/ loose soil complete all as specified and directed by Engr-in-Charge

M&L for excavation in trenches n.exc 1.5m wide and n.exc 1.5m in deepth; for foundation etc or for shafts, wells, cesspits, manhole, pier holes, etc n.exc 10 Sqm on plan and n.exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed by Engr-in-Charge

M&L for RCC (Nominal Mix) type B1 1:2:4 (20mm graded aggregate) as in foundation, including rafts, footings, foundation beams, plinth beams, bases for columns etc basement slabs under reamed piles and mass concrete complete all as specified and directed by Engr-in-Charge

M&L for RCC (Nominal mix) type B1 1:2:4 (20mm graded aggregate) as in columns, pillars, piers, posts and struts complete all as specified and directed by Engr-in-Charge

M&L for RCC (Nominal mix) type B1 1:2:4 (20mm graded aggregate) supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed by Engr-in-Charge

M&L for RCC (Nominal mix) type B1 1:2:4 (20mm graded aggregate) as in chajjas complete all as specified and directed by Engr-in-Charge

M&L for RCC (Nominal mix) type B1 1:2:4 (20mm graded aggregate) as in beams, cantilvers, bressummers, lintels over 1.5m span complete all as specified and directed by Engr-in-Charge

Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed by Engr-in-Charge

Use and waste of formwork to sides of pillars posts, struts, piers, columns and stanchions finished the suface rough complete all as specified and directed by Engr-in-Charge

Use and waste of formwork to sides and soffits of floors or roof beams, beams haunchings, girders,bressummers lintels, cantilevers, shelves including supports overhangs etc also splays between floors and beams etc complete all as specified and directed by Engr-in-Charge

Use and waste of formwork to chajjas, troughts and similar items including edges complete all as specified and directed by Engr-in-Charge

M&L form work with fair finished to soffits of suspended slabs such as roof slabs, floor slabs, landing and similar work nexc 200mm thick (horizontal or sloping) complete all as specified and directed by Engr-in-Charge

Supply only water proofing compound complete all as specified and directed by Engr-in-Charge

M&L for brick work with sub class `B' bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed by Engr-in-Charge

M&L for brick work with sub class `B' bricks straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed by Engr-in-Charge

S&F powder coated of any colour (Thickness or powder coating not less than 50 micron) Anodised aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed by Engr-in-Charge

S&F Sheet glass ordinary quality 4.8 mm thick and glazing in aluminum door in squares exc 0.5 sqm each complete all as specified and directed by Engr-in-Charge

S&F Sheet glass ordinary quality 4.00 mm thick and glazing in aluminum window in squares n exc 0.5 sqm each complete all as specified and directed by Engr-in-Charge

Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless stell cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed by Engr-in-Charge

S&F 4 levers brass mortices lock, vertical type, size 100mm complete all as specified and directed by Engr-in-Charge

M&L for fixing 2 mm thick anodised aluminium composite panel fixed in aluminium frame including necessary rubber beading, jointing cleats complete all as specified and directed by Engr-in-Charge

S&F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm complete all as specified and directed by Engr-in-Charge

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S square tube, suppling and fixing in opening as per specification and drawing complete all as specified and directed by Engr-in-Charge

S&F factory made solid panel PVC door shutter 30mm thick (style).consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with eat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement suppling & fixing in the frame at site as per specification and drawing complete all as specified and directed by Engr-in-Charge

S&F 3mm thick figured glass, pin head type/frosted and fixed to aluminium frame work n.exc 0.5 Sq.m in each pane complete all as specified and directed by Engr-in-Charge

S&F mild steel framed work such as grills, gratings etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed by Engr-in-Charge

S&F 150mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed by Engr-in-Charge

S&F 150mm extruded aluminium alloy handles fabricated type anodised complete all as specified and directed by Engr-in-Charge

S&F 100mm medium weight butt hinges cold rolled mild steel complete all as specified and directed by Engr-in-Charge

S&F 200mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed by Engr-in-Charge

S&F 250 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and siding bolts of extruded sections or cast aluminium alloy complete all as specified and directed by Engr-in-Charge

M&L for hardcore of gauge n.exc 63mm, deposited, spread and levelled in layers n.exc 15cm thick, watered and rammmed to a true surface complete all as specified and directed by Engr-in-Charge

M&L for PCC 1:5:10 type E-2 (using 40mm graded agg) as in foundation, filling and mass concrete complete all as specified and directed by Engr-in-Charge

M&L 40 mm thick PCC 1:2:4 type B-0 (using 12.5 mm graded stone agg) as damp proof course to horizontal or vertical surfaces including necessary form works, applying evenly a coat of blown type bitumen at 1.50 kg per sqm and blinding with clean dry sand @ 0.05 cum per sqm including 150 micron thick polythene film laid on a coat of bitumen primer @ 0.30 to 0.50 kg per sqm complete all as specified and directed by Engr-in-Charge

M&L PCC 1:4:8 type D-2 75mm thick as in sub base of floor complete all as specified and directed by Engr-in-Charge

M&L for non skid coloured joint free tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exc 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed 15mm thick in CM 1:6 all as directed complete all as specified and directed by Engr-in-Charge

Same as per ser No 49.00 but on vertical surfaces such as skirting , dado risers to steps over and including 10 mm thick bedding layer in CM 1:4 , set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by Engr-in-Charge

S&F non-skid coloured ceremic tiles 7 to 8 mm thick (Square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floors etc set and jointed in neat cement slurry and pointed in neat cement slurry and pointed in white or coloured cement to match the existing surfaces including 15mm thick screed bed or bedding layer in cement mortar 1:6 for fixing of tiles complete all as specified and directed by Engr-in-Charge

M/L glazed ceremic tiles 200x300x7 mm in dado set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles including 10mm thick cement mortar 1:4 for fixing of tile complete all as specified and directed by Engr-in-Charge

M&L for 75mm thick PCC in 1:3:6 type C1 (using 20mm graded agg ) as in plinth protection/path finished the surface even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge

M&L for rendering 15mm thick plaster in CM 1:6 on fair faces of brick or concrete work finished the surface even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge

M & L rendering 15mm thick on cement mortar 1:4 mixed with water proofing compound @ 3% of qty of cement finished of brick or concrete work finished the surface even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge Note : WPC will be measured and paid separately.

M&L for rendering 5mm thick plaster in CM 1:3 on fair faces of brick or concrete work finished even and smooth without using extra cement as in ceiling complete all as specified and directed by Engr-in-Charge

M&L for preparation of new plastered surfaces and applying two coats of oil bound distemper of approved shade/tint over a coat of primer on walls complete all as specified and directed by Engr-in-Charge

M&L for preparation of new wall surface and two coats of cement base paint on walls complete all as specified and directed by Engr-in-Charge

S&F 15mm dia bore tube medium grade galvanised with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed by Engr-in-Charge

S&F 15mm bore dia bib taps cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed by Engr-in-Charge

S&F 15mm dia bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed dwon high pressure, with or wothout lettered `Hot' or `Cold' with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed by Engr-in-Charge

S&F CP angle cock 15mm cast copper alloy screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed by Engr-in-Charge

S&F Vitreous China wash basin white flat back size 550x400mm excluding taps chain and plug and procelain stopper but including brackets including PVC waste pipe 32 mm complete all as specified and directed by Engr-in-Charge

S&F vitreous china water closet Padestal pattern (white) excluding fixing bolts, flushing cistern and flush pipe and including EWC Sheet cover complete all as specified and directed by Engr-in-Charge

S&F CP Health Faucet with 1 mtr metalic Expandable tube & hook complete all as specified and directed by Engr-in-Charge

S&F ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed in 20mm dia bore pipe complete all as specified and directed by Engr-in-Charge

S&F 32 mm waste coupling of PTMT (half or full threaded) complete all as specified and directed by Engr-in-Charge

S&F Grating doom 100mm dia of PTMT (min wt -25gms) complete all as specified and directed by Engr-in-Charge

S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed by Engr-in-Charge

S&F flush pipe of polyethylene of low or high density of PVC 32mm dia for low level cistern complete all as specified and directed by Engr-in-Charge

S&F PVC 10 ltrs valveless syphonic action type flushing cistern low level, white, with inlet ball valve float and handle including brackets complete all as specified and directed by Engr-in-Charge

S&F towel rail 450mm long of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (min wt - 170 gms) complete all as specified and directed by Engr-in-Charge

S&F 100mm cast iron sanitary connections socket to fit WC out let complete all as specified and directed by Engr-in-Charge

M&L for preparation of new steel surface of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a red oxide primer complete all as specified and directed by Engr-in-Charge

S&F 15 mm dia concealed stop valve fancy type CP with long shank and cup complete all as specified and directed by Engr-in-Charge

S&F 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall/floor complete all as specified and directed by Engr-in-Charge

S&F 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall/floor complete all as specified and directed by Engr-in-Charge

S&F of 110mm dia PVC (SWR) bends complete all as specified and directed by Engr-in-Charge

S&F 75mm PVC(SWR) bends any radius with adess door complete all as specified and directed by Engr-in-Charge

S&F of 75dia PVC (SWR) Vent cowl complete all as specified and directed by Engr-in-Charge

S & F 75mm dia, PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed by Engr-in-Charge

S&F 75mm bore dia pipe Stack clamps out of 50mm by 5mm flat iron & 16mm dia round iron stays, including bolts & nuts & securing ends of stay to wall or roof complete all as specified and directed by Engr-in-Charge

S & F Pre-painted galvalume aluminum zinc coating GI vased corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed by Engr-in-Charge

S & F Pre-painted galvatume aluminum zinc coating GI vased Plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed by Engr-in-Charge

S & F for 4 mm thick of size 600x600mm HSPC (high pressure Steam Cured) pre-Painted self embossed, textured designer board E-Board Classic to be fixed GI powder coated grid/section size 600mmx600mm with main runner 38x24x0.9mm thick ,cross tee 28.6x24x0.9 mm and wall angle 19x19xo.9 mm duly suspended with 4mm dia GI bar hangers 1200mm centre to centre both ways fixed with steel dash fasteners or from purlin from the roof with alignment clip including providing provisions for light fixtures of any size etc complete all as specified and directed by Engr-in-Charge

S&F 150mm dia mild steel sheet eaves gutters of 1mm thick sheet, galvanised class 3, half round with rounded edges complete all as specified and directed by Engr-in-Charge

S & F of steel work as in tubular trusses including special shaped washers etc. complete using ERW or induction butt welded tubes conforming to IS – 1161 – 1979 grade St – 240 complete all as specified and directed by Engr-in-Charge

S&F mild steel screw bolts 11 to 15 mm dia (machine made) with hexagonal or square heads at one end and screwed the other or screwed both ends each screwed end to be fitted with washers and one hexagonal or square nut nexc 5 cm long complete all as specified and directed by Engr-in-Charge

S&F Plates (plain or chequered) channels. Square cut or notched ) (ordinary and counter sunk) forming holes, without any attachment of Fe-410-W (Gde-E-250 quality-A) complete all as specified and directed by Engr-in-Charge

S&F bands, straps or stays , plain angle cleat or flat iron cleat or securing purlins to wood trusses or rafters, knee piece and similar small articles etc conforming to Fe-290 Gde E-165 complete all as specified and directed by Engr-in-Charge.

S&F for Draperly rod /Harrison rails of stainless steel of 20mm dia with fixing brackets , stops, rollers and rings etc complete all as specified and directed by Engr-in-Charge

S&F Brass chromium plated shower rose 125mm size complete all as specified and directed by Engr-in-Charge

M&L Cement concrete 1:3:6 type C-1 (20 mm graded agg ) in surface channels and drains complete all as specified and directed by Engr-in-Charge

Extra for forming fair finished drain or channel 30cm inner grith in cement concrete, using extra cement, including forms, moulds, mitred/stop ends etc complete all as specified and directed by Engr-in-Charge

Removing excavation material n exc. 50m & deposited where directed at a level n exc. 1.5m above the starting point complete all as specified and directed by Engr-in-Charge

Returning, filling in, including spreading, leveling, watering & well ramming in layer s not exc 25 cm complete all as specified and directed by Engr-in-Charge

M&L of earth filling under floor well ramming including watering as required Spreading & leveling in layers n.exc. 25cm thick complete all as specified and directed by Engr-in-Charge

S&F rotational moulded polyethylene 1000 Ltrs Capacity water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position in SSR Part-I including ball brass valve, with polythelene float and fly nut complete screwed down for iron pipe of 20 mm dia complete all as specified and directed by Engr-in-Charge

S&F for 15 mm bore dia of pipe Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and direcated and as approved by GE complete all as specified and directed by Engr-in-Charge

M & L for PCC 1:2:4 type B- 1 (20mm graded aggregate) as in lintels up to 1.5m clear span, cills, steps, seismic & other similar bands, plinth course, string course, lacing course, parapets & railing up to 60cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in items 159, water trought & the like including weathering, slightly rounded or chamfered angles & throating complete all as specified and directed by Engr-in-Charge

Providing pre cast cement concrete type B- 1, 1;2:4 (20mm graded aggregate) in cover slabs (for man holes etc) and similar articles with plain faces set in cement mortar 1:4 complete all as specified and directed by Engr-in-Charge

Excavation over areas not exceeding 1.5m deep and getting out in soft/ loose soil complete all as specified and directed by Engr-in-Charge

Excavation over areas exceeding 1.5m deep but n exc 1.5 m deep and getting out in soft/ loose soil complete all as specified and directed by Engr-in-Charge

M&L for loose filling with broken bricks aggregate of gauge 80 to 150mm in soakage pits, soakage wells complete all as specified and directed by Engr-in-Charge

M&L for loose filling with broken bricks aggregate of gauge 40 to 80mm in soakage pits, soakage wells complete all as specified and directed by Engr-in-Charge

M & L for formwork to sides of RCC / PCC bands in walls horizontal or sloping and similar work for rough finished surface of concrete complete all as specified and directed by Engr-in-Charge

Material and labour for brickwork with sub class `B' bricks in one brick thick honey comb walling, built in cement mortar 1:3 complete all as specified and directed by Engr-in-Charge

S&F for depth 0.70m – 1.65 m, DWCPE (SN8) 180 (OD)/163(ID) mm diameter Pipes laid on 150 mm thick PCC 1:3:6 type C-2 including packing under and haunching against the sides of pipes bed with excavation in any type of soil, including manholes/drop manhole of standard size made of Brick masonry/ RCC/Precast RCC with SFRC ventilating cover and frame. Includes all items and activities to execute and make sewer line functional complete all as specified and directed by Engr-in-Charge

M&L for wiring with 1.5 sqmm size stranded FRLSH copper conductor cable single core multi stranded copper conductor in and including PVC concealed conduit medium grade and MS terminal boxes suitable for housing modular switches, sockets and regulators with all fittings and fixing materials including modular inner plate and cover plates of suitable modules and multistranded FRLSH copper earth continuity conductor of size 1.5 Sqmm and connecting to common earth dolly complete all as specified and directed directed by Engr-in-Charge for the following :- Make of caping/casing & PVC boxes :- Prestoplast/Finolex/supreme Make : RR Kable/Havells/Finolex

One light point controlled by one switch one way

One ceiling/wall/exh fan point controlled by one switch one way

One 3 pin socket outlet 5 Amps independent board

One socket outlet 5 Amps 5 pin on same board with other switches

All as per item No 110 here-in-before but with cable size 2.5 Sqmm for one 5 pin 15 Amps socket outlet on independent board incl multistranded insulated copper earth continuity conductor of size 1.5 Sqmm and fixing materials green colour and connecting to common earth dolly complete all as specified and directed directed by Engr-in-Charge Make : RR Kable/Havells/Finolex

M&L for Switch piano flush type single pole, one way 5A complete all as specified and directed directed by Engr-in-Charge Make:- Plaza/SSK/Hager

M&L for Socket outlet, 2 in 1, 3 pin 5A flush type complete all as specified and directed directed by Engr-in-Charge Make:- Plaza/SSK/Hager

M&L for Switch piano flush type single pole, one way 15A complete all as specified and directed directed by Engr-in-Charge Make:- Plaza/SSK/Hager

M&L socket outlet 2 in 1, 5A/16A, 5 pin flush type complete all as specified and directed directed by Engr-in-Charge Make:- Plaza/SSK/Hager

M&L for stepped type electronic fan regulator 100 Watt socket size flush type on the existing phenolic laminated sheet etc complete all as specified and directed directed by Engr-in-Charge Make:- Plaza/SSK/Hager

M&L for 20W LED, 4', Wall mounted LED batten, extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver.etc with all accessories internally pre-wired and fixing the same on and including two Nos PVC blocks and connecting up with flexible copper cable of suitable size from ceiling rose to the light fitting incl taking down old unsv light fitting complete all as specified and directed directed by Engr-in-Charge Make : Havells Cat No LHFXCEP1TNNW020 (batten) & LHDLEFXD5LR020 (LED Tube) or equivalent in Bajaj/Philips

M&L for Energy efficient recessed mounted LED luminaire 42W, suitable for 2'x2' grid/ armstrong ceiling including provisioning of flexible copper cable of size 0.75 Sq mm 3 core from ceiling rose to the light fitting in the existing space/ by cutting suitable space in false ceiling to mount light fitting with required handing/ fixing arrangement incl taking down old unsv light fitting complete all as specified and directed directed by Engr-in-Charge Make :- Havells Cat No VENUSNEOHE2X2PLR18-42WLED865MOD or equivalent in Bajaj or Philips

M&L for 10W LED, 2', Wall mounted polycarbonate batten internally pre-wired with electronic driver and polycarbonate diffuser and fixing the same on and including two Nos PVC blocks and connecting up with flexible copper cable of size 0.75 Sq mm 3 core from ceiling rose to the light fitting incl taking down old unsv light fitting complete all as specified and directed directed by Engr-in-Charge Make Havells Cat No LHEXBQP5IN1W009 or equivalent in Bajaj/Philips

M&L for ceiling rose 3 terminal PVC/Polycarbonate isolated body complete all as specified and directed directed by Engr-in-Charge Make:- Plaza/SSK/Hager

M&L for LED 1x20W Security light fitting, drawn through including GI bracket of 25mm bore light grade bent to shape and fixed on wall with metal fastners 2 Nos 10mm dia incl drilling holes as required and connecting up with flexible copper cable of size 0.75 Sq mm 3 core from ceiling rose to the light fitting incl taking down old unsv light fitting complete all as specified and directed directed by Engr-in-Charge Make:-Havells Cat Pt No LHETBXU7PA6S020 or equivalent in Bajaj/Philips

M&L for Lamp holder , PVC/ Polycarbonate type with PVC round/square block incl 9 watt LED lamp suitable for lamp holder fittings complete all as specified and directed directed by Engr-in-Charge Make:- Plaza/SSK/Hager Make : LED Lamp : CG/Havells/Bajaj

M&L for rubber bush with clamping set, comprising GI bolt, nut and split pin complete all as specified and directed directed by Engr-in-Charge

S & F MCB DB TPN 4 way sheet steel double door phospetised powder painted with bus bar, neutral link, earth bar and Din rail PPI Horizontal 4 Quadrant incl taking down old one complete all as specified and directed directed by Engr-in-Charge Make : Legrand/schendier/Havells/L&T

S & F MCB TPN 240V 63 amps , 10KA complete all as specified and directed directed by Engr-in-Charge Make-Legrand/Havells/L&T

S & F MCB SPN 32 Amps 240 V complete all as specified and directed directed by Engr-in-Charge Make : Havells/Legrand/L&T

S & F MCB SP 6 to 32 Amps 240 V complete all as specified and directed directed by Engr-in-Charge Make : Havells/Legrand/L&T .

M & L for sub main wiring with 2 single core 4 Sqmm copper conductor (Multistandered) including PVC conduit concealed in roof/wall/floors with all fittings and fixtures including 2.5 Sqmm green colour copper conductor as earth continuity complete all as specified and directed directed by Engr-in-Charge Make : RR Kable/Havells/Finolex

S & F for LT UG cable/ service connection of any size and M&L for laying of LT UG cable, XLPE insulated, galvanised steel strip or wire armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area of 16 sq mm, 4 core complete all as specified and directed directed by Engr-in-Charge Make : Richa/Havells/Polycab/Finolex

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m depth and getting out in soft/ loose soil complete all as specified and directed directed by Engr-in-Charge

Returning filling in trenches including spreading leveling watering and well ramming in layers not exceeding 25 cm thick complete all as specified and directed directed by Engr-in-Charge

Removing of excavated material not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed directed by Engr-in-Charge

M&L for spread fine river sand in trenches complete all as specified and directed directed by Engr-in-Charge NOTE: For measurement purpose, punned down thickness shall only be taken.

M&L for laying brick sub class 'B' old size burnt bricks for cable protection of size 230mmx115mmx75mm complete all as specified and directed directed by Engr-in-Charge

Supply & laying tubes ' light grade' galvanised, with all fittings, fixed complete to walls, poles, ceilings or laid in floors/ trenches/ road crossing for protection of cables of size 40 mm dia bore including taking down corroded GI tubing complete all as specified and directed directed by Engr-in-Charge

M&L for earthing complete with galvanized steel earth plate electrode of size 600x600x6mm thick buried directly in ground (earth pit not less than 2.25m deep below the normal ground level) with top edge of the earth plate not less than 1.5 mtr below normal ground level connected to galvanised earth lead wire 4 mm dia as earth lead connectd by means of bolts, nuts, washers and check nuts all as shown in electrical plate No 3 of MES SSR Part-I, including testing on completion complete all as specified and directed directed by Engr-in-Charge NOTE:- (i) The unit rate shall also included for earth work in hard/ dense soil, PCC (1:3:6) type C1, CI cover 10 mm thick, funnel with GI watering pipe 20mm dia Medium grade, GI protection pipe light grade 15mm dia and wire mesh complete in addition to item No 1 (a) to (e) of preamble (notes) under sub heading earthing, specified on Sl Page No 389 of MES SSR Part-II. (ii) Earthing lead and GI protection pipe beyond 7.5m will be measured and paid separately. (iii) Test points shall be made of GI strip 32x6 mm bridge type mounted on insulators, where ever applicable

S&F Ceiling fan 1200 mm sweep complete single phase 240 volts without regulator complete all as specified and directed directed by Engr-in-Charge. Make : Bajaj/Usha/CG/V-Guard

S & F Ventilating fan plastic type of 250 mm sweep complete with louvres,1400 rpm single phase 240V complete all as specified and directed directed by Engr-in-Charge Make: Bajaj/CG/Havells/Ushaake Havells, code No- Ventil Air-DX

S&F Electric storage water heater of 25 Ltr capacity complete single phase 240 Volts complete all as specified and directed directed by Engr-in-Charge Make : Havells/Bajaj/V-Guard Make: Havells monza of four star rating.

S&F bed lamp alongwith accessories single phase 240 Volts complete all as specified and directed directed by Engr-in-Charge Make : Havells/Bajaj/Usha Make: Havells monza of four star rating.

Shri Lakhinder Praasd

SK SINGH

Shri H Kivigho Zhimo

sanjay kumar