35/2022-23(EDCR) Increasing of Capacity 100 KVA to 250 KVA TF near Rangoli Mandap EDD-I, Rampur and replacement of jerjer 11 KV line under EDD-Milak Rampur

Amount

Carriage of the following material from Store Centre, Rampur to work site including loading & unloading.

8.5 PCC Pole

11/0.4 Kv 250 KVA Transformer

ACSR Weasel Conductor

LT ABC 3X120 Sq mm

LT XLPE 1X400 Sq mm Leed

other line material such as X-arm, etc.

Scrap GI Wire (from site to Store)

Scrap ACSR Weasal (from site to Store)

11/0.4 Kv 100 KVA Transformer (from site to Store)

a) Single support Excavation of foundation Pit in size of 75x45cm having depth of 1/6th of the full length of the support(pole), providing and laying of stone pad (300x300x75 mm) in the Bottom of the pit. Erection of support(pole) complete with fixing of 11 KV V-type cross-Arms and other accessories by providing clamps made of MS flat of size 65x65xc6 mm with Nuts & Bolts, as per RESPO Norms.

8.5 Mtr long PCC pole

Grouting of support in CC 1:4:8(cement, sand & 40 mm. brick ballast) Grouting will be done in the block of size 45x45cmx1/6th of full length of the support upto ground level, 30 cm plinth above the ground level with CC 1:3:6 (cement, course sand and stone grit) with muffing. The work includes back filling and proper ramming etc. a) Single support

8.5 Mtr long PCC pole

Grouting of Stay Rods(20x1800)mm including all work of excavation, cement concrete in size of (0.60x0.60x0.30)M in the ratio of 1:4:8(cement, sand, 40mm brick ballast) including back filling of soil and proper ramming etc.

Fixing, tightening and nozelling of stay wire with stay rod with the pole of required tension by providing stay clamps.

Fixing, tightening of 33/11 KV Pin Insulator with Pin on pole as required.

Laying, sagging, stringing and binding with jumpering etc of ACSR Weasel Conductor with Jumpering as per RESPO Norms and as per direction of Supervising Engineer.

Removal of ACSR Weasel Conductor as per RESPO Norms and as per direction of Supervising Engineer.

Laying, sagging, stringing and binding LT XLPE 1X400 sqmm Cable as per RESPO Norms and as per direction of Supervising Engineer.

Laying, sagging, stringing and binding LT ABC 3X120 sq mm Cable as per RESPO Norms and as per direction of Supervising Engineer.

Construction of plinth with CC 1:3:6 (cement, course sand and stone grit) with muffing and fancing for 250 KV TF as per RESPO Norms and as per direction of Supervising Engineer.

Removel of Existing TF 100 KVA form double pole as per RESPO Norms as per direction of Supervising Engineer.

Installation of 11/0.4 KV 250 KVA Transformer including earthing and making connection etc.

Installation of Distribution box 3 Phase and making connection as per RESPO Norms and as per direction of Supervising Engineer.

Providing and fixing F Bracket with bolts and nuts

Providing and fixing of clamp holding X-Arm with Nut and bolts

M/S RAHAT & BROTHERS ELECTRICALS