REPAIR REPLACMENT AND MAINT OF INTERNAL ELECTRIFICATION OF OTM ACCN FOR 515 ABW, MIL WING , TORNAGALLU MD ACCN FOR SOC, SF MD ACCN, HR BK, FAFA, GTOC, GTE, CE POOL, VLO AND WELCOME MAINT OF OFFICERS MD ACCN AT HR BK SOC UNDER AGE B/R (C) OF GE(SOUT

Amount

M&L for preparation of old plastered or unplastered surfaces of ceiling and applying one coat of white washing including cleaning of splashes of white wash on floor/objects etc all as specified and directed.

M&L for preparation of old distempered surfaces of ceilng and applying one coat of oil bound distemper all as including cleaning splashes of distmeper on floor/objects etc all as specified and directed.

S&F as in repair 12 mm thick gypsum board in ceiling fixed on frame work of GI sheet section, the main runner of 22 gauge GI sheet and cross runner of 24 gauge GI Sheet must be framed to form a mesh 0.6 x0.6 mtr centre, the gupsum board must be fixed to GI frame and joint to be properly filled in with POP paste and paper tap to get a levelled to smooth ceiling. Recessing of Gypsum board for fixing for light fixters must be done with extra frame work of GI to hold the concealed light fixture etc including two or more coat of Plastic emuslion paint on ceiling with putty work designer complete all as specified and directed.

S&F as in repair 5 mm thick PVC board in ceiling fixed on frame work of GI sheet section, the main runner of 22 gauge GI sheet and cross runner of 24 gauge GI Sheet must be framed to form a mesh 0.6 x0.6 mtr centre, the gupsum board must be fixed to GI frame and joint to be properly filled as per manufacture instruction and paper tap to get a levelled to smooth ceiling. Recessing of PVC board for fixing for light fixters must be done with extra frame work of GI to hold the concealed light fixture etc colour/design as approved by GE/Engr-in-Charge complete all as specified and directed.

M&L for rendering 5mm thick in CM 1:3 on ceiling of concrete surfaces finished even and smooth without using extra cement including taking down plaster, including raking out joints, hacking for key, scrubbing down with water etc and removing rubbish of the premisesall as specified and as directed.

M&L for preparing of newly plastered surfaces and applying three coats of white wash on ceilings complete all as specified and as directed by the Engineer-in-charge

M&L for preparation of old plastered or unplastered surfaces of walls and cornices and applying one coat of white wash all as specified and directed.

M&L for preparation of old plastered or unplastered surfaces of walls and cornices and applying two coat of white wash all as specified and directed.

M&L for preparation of old distempered surfaces of walls and applying one coat of Oil emulsion distemper including stopping of nail holes, filling of cracks, etc and cleaning all window panes from splashes / droppings, all as specified and directed.

M&L for preparation of old distempered surfaces of walls and applying two coat of Oil bound distemper including stopping of nail holes, filling of cracks, etc and cleaning all window panes from splashes / droppings, all as specified and directed.

M&L for complete removal of existing treatment by wire brushing, rubbing down with water of old painted surfaces of walls and applying two coats of oil bound distemper over acoat primer over 1 mm thick birla wall care putty, including stopping of nail holes, filling of cracks, etc and cleaning all window panes from splashes / droppings, complete all as specified and directed.

M&L preparation of old plastered surfaces of walls and applying one coat of cement base paint complete all as specified and as directed.

M&L for ejecting of cement slurry with water proofing compound in CM 1:2 in stonery masonery wall, cement slurry to be ejected min 300mm depth of joint with ejecting pump and close the damage portion by pointhing all as directed by Engr-in-Charge.

M&L for rendering 10mm thick in CM 1:6 on fair face of brick or concrete surfaces of walls finished even and smooth without using extra cement including raking out joints, hacking for key, scrubbing down with water etc and removing rubbish of the premises complete all as specified and as directed.

M & L for applying two coats of Oil bound distemper on newly plastered surfaces incl preparing the surfaces and applying one coat of alkali resistant priming paint complete all as specified and directed .

M&L rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 incl finished even and smooth including taking down all as specified and all as directed

M&L preparation of newly plastered surfaces of wall and applying two coats of cement base paint over a coat of primer surface all as specified and as directed.

M&L preparation of old painted surfaces of wood work and joinery exceeding 10 cm width or girth and applying one coat synthetic enamel paint all as specified

M&L preparation of old painted surfaces of steel and iron work exc 10 cm width or girth and applying one coat of synthetic enamel paint all as specified

S&F in repairs galvanised mild steel wire cloth, 0.56 mm nominal ida of wire and average width of aperature 1.18 mm and fixed with tinned tacks, or galvanised wire staples.

S&F in repairs sheet glass ordinary quality 4mm thick in square not exc 0.50 Sqm each pane glazing with oil putty, clip in metal frame and wooden beading in wooden frame complete all as specified including hacking out any thickness all as completed as directed by Engr-in-Charge

S&F 4 mm in repairs thick figured glass pin headed type and glazing with oil putty in square n.exc 0.50 Sqm in each pane including hacking out any thickness all as completed as directed by Engr-in-Charge

S&F in reapir 15 mm bore stop valves, fancy type chromium plated incl (concealed part) cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed complete all as specified and directed. Make:- Cera Cat Part No. F1017351 & F4050102 or equivalent in Hindware/Paryware.

S&F in reapir 15 mm bore angle cock with wall flange, fancy type chromium plated up (concealed type) cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union complete all as specified and directed. Make:- Cera Cat Part No. F1017201 (RIPPLE) or equivalent in Hindware/Paryware.

S&F in repair 15 mm bore two way angle cock with wall flange, fancy type chromium plated cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union complete all as specified and directed. Make:- Cera Cat Part No. F1017211 (RIPPLE) or equivalent in Hindware/Paryware.

S&F in repair 15 mm bore single lever basin mixer with 450mm braided connection pipe (without pop-up , fancy type with capstan heads, chromium plated screwed down high pressure with or without lattered 'Hot' or 'Cold' with long screwed for iron pipe and fixed complete all as specified and directed. Make:- Cat Part No F-1007451 or equivalent in Hindware/Paryware.

S&F in repair brass chromium plated tubular towel rail 600 mm long complete all as specified and directed. Make:- Cat Part No F-5006103 or equivalent in Hindware/Paryware.

S&F in repair, bib taps, brass, fancy type, long body, chromium plated for 15 mm bore pipe or for brass ferrule or to GI socket complete all as specified and directed.(Make Cat part No F3002152(Floral series) of Cera or Equivalent in Prayag/Jaguar/Hindware)

S&F in repairs Glass corner shelf including CP railing, radius 250 mm complete all as specified and directed by the Engr-in-Charge, fixed in repairs.

S&F in repair vitreous china washdown down water closet set incl internal fittings complete of size 710x390x790mm snow white colour washdown water closet pan & trap (One peace) with soft close seat cover with mild steel chromium plated or aluminium hinginng device incl all joints incl connection to drain pipe complete all as specified and directed. Make:- Cera (Cruiser) Cat Part No. S1012135 & Cat part No. B1520110 or equivalent in Hindware/Paryware/Jaguar/Kohlar.

S&F in repair toilet paper holder CP with flap guard complete all as specified and directed. Make:- Cera Cat Part No F-5003110 or equivalent in Hindware/Paryware.

S&F in repair health faucet with brass body with wall hook and 1 mtr ss braded rubber hose pipe with screwed nut for inlet connection complete all as specified and directed. Make:- Cat Part No F-8030301 or equivalent in Hindware/Paryware.

S&F vitreous china white wash hand basin snowwhite countertop of size 750x380x130 mm excluding taps, waste chain and plug and porecelain stopper but incl brackets and cutting fair pinning in ends of brackets complete all as directed flat back size 550x400 mm excluding taps, waste, chain and plug and porecelain stopper but incl brackets and cutting for pinning in ends of brackets complete all as specified and directed. Make:- Cera (COLMAX) Cat Part No. S2020154 or equivalent in Hindware/Paryware.

S&F in repair vitreous china wash hand basin, white, flat back size 550 x 400 mm including one number brass CP waste coupling, waste pipe 32 mm dia, brackets 2 numbers including cutting for and pinning in ends of brackets complete all as specified and directed. (Make Cat part No S2040103 (Cornet series) of Cera or Equivalent in parryware/hindware)

S&F in repair PVC white low level flushing cistern 10 ltr capacity with all fittings syphonic action with inlet ball valve and float including flush pipe, handle, bracket PVC short bendetc. complete all as specified and directed .(Make Cat part No B 1010102 (Ciena Premium) of Cera or Equivalent in parryware/hindware)

S&F in repair PVC flush pipe 32 mm bore high density for low level flushing cistern including all joints, washers suitable Pedstal type WC complete all as specified.

S&F sink with drainage board made of stainless steel 1 mm thick, kitchen or laboratory, with plugs, washers and wastes coupling, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe over all size 915mm x460mm bowl size 405mm x 355mm x 178mm (minimum), including PVC waste pipe 40 mm dia complete all as specified and directed.

S&F in repairs plastic water closet seat cover, White, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specifed and as directed.(Make Cat part No B1510119 (Carina) of Cera or Equivalent in parryware/hindware)

S&F in repairs brass chromium plated grating 125 mm dia circular with centre hole/ without hole of approved make and fixing with cement mortar 1:3 on Nahani trap or floor trap complete all as specified.

S&F in repairs Swivel shower rose 15mm of brass chromium plated 150 mm dia round with shower arm of 190mm Long Light Body complete all as specified and directed.

S&F in repair 32 mm dia PVC waste pipe for WHB complete all as specified.

S&F in repair 40 mm dia PVC waste pipe for SS Kitchen sink complete all as specified.

M&L in repairs 32mm dia Waste coupling, brass, chromium plated for SS Kitchen sinks, WHB etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified.

S&F in repairs fancy type brass bracket with screw 25 mm dia including wooden plugs

S&F in repairs fancy type brass bracket with screws for wall corners 25 mm dia including wooden plugs

S&F in repairs fancy type aluminium powder coated curtain rods 25 mm dia

S&F in repairs 100 mm long Hasp and staple, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all specified.

S&F in repairs 150 mm size extruded aluminium alloy handles fabricated type anodized complete all as specified.

S&F in repairs stainless steel 100 mm butt hinges for doors complete all as specified.

S&F in repairs Aluminium anoidsed barrel tower bolts of extruded section 150mm long.

S&F in repairs 250 mm long aluminium alloy anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheets cast or extruded sections or cast aluminium alloy complete all as specified.

S&F in repairs floor door stopper(double) of aluminium alloy body and tongue anodised with hard drawn steel spring fixed to door overall length of cover plate 140mm complete all as specified

S & F in repair Vitreous water closet seat cover closed pattern with flat bottom and cover and mils steel chromium plated or aluminised hinging device all as specifed & directed

Dismantling boarding, any description, fixed any position with nails.

M&L 19 mm thick Plywood, grade 1 quality, exterior grade, decorative face laminated, veneered on both faces, fixed with screw to timber frame work, fixed with nails for kitchen cupboard complete all as specified.

M&L 2nd class hard wood plain fillets, square, rectangular or trinagular in section, clean sawn, secured with nails or brads, sectional area exc 13 sqcm but n.exc 25 sqcm.

S&F Met craft steel soft close clip on 3D Hydraulic concealed Hinges for half overlay door of pair (8 Degree crank ,Silver complete all as specified and as directed.

S&F BLOO BASKET Stainless steel Modular Kitchen Basket Accessories cabinets Multiporpose Utensils drawer basket wired (set of 6, Size : 16 inch w X 20 inch D X 8 inch H) complete all as specified an directed by Enge-in-charge.

S&F Goldrej cold rolled steel soft close drawer channel runner telescopic ball bearing (350mm/14 inch, loading bearing capacity 35 kg, Zinc) 1 pair, item weighing not less than 500gm/piece, complete all as specified and as directed by Engr-in-charge.

S&F Home Decorax Traders civic Stainless steel Kitchen Cabinet handels pack of 2 with crome finish including bolts for fixing complete all as specified and directed by Engr-in-charge.

M&L Granite (of any type) tiles 20 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone incl grinding and polishing over 20 mm scred bed in CM 1:6 complete,

Supply and fixing in repairs kitchen sinks of Stainless steel 1.00mm thick with plugs, washers and waste pipes and cast iron cantilever brakets including and connecting union to pipe over all size 495mm X 420 mm bowl size 410mm X 330mm X 160mm.

Supply and fix in repair Stainless Steel Plate rack of size 95 x 85 CM. Make : Maharaja or equivalent make as approved by GE.

S&F in repiar stainless steel sink cock ( table mounted) with angular knob complete all as specified. (Make : Jaquar Cat No :- FLR- 5359N)

Taking up or down 15 mm bore steel tubing and connnections, including cleaning for re-fixing or removal to store.

M&L 15 mm medium grade galvanised water tubing, with all fitting and fixed complete to walls and ceilings or laid in floors conealed type complete all as specified.

S&F in repair 100 mm dia PVC (SWR) floor trap, plain with grating incl jointing with solvent cement complete all as specified.

Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing), removing servicieable tiles to store and rubbish off the premises.

S&F coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white cement or coloured cement to match over 15 mm thick screed bed in cement mortar 1:6.

S&F colour Glazed ceramic tile in verticle surface 300x200x7 mm thickset over 10 mm thick rendering on fair faces of brick work or concrete surfaces as backing coat in cement mortar 1:4. and jointed in neat cement slurry and pointed in white or colour cement to match.

Demolition of cement concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground floor)

M & L cement concrete 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) in foundations, filling and mass concrete.

M&L 25 mm thick cement concrete type B-1, 1:2:4 (using 20 mm graded crushed stone aggregate), as in sub base of floors.

S&F 1000 Ltr rotational moulded poly-ethylene water tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part-I including disconnecting existing tanks as in repair and all as specified.

S&F 20 mm bore nipple suitable for HDPE water tank. (Min wt 45 gms).

S&F as in repair PVC connections 15 mm size with PTMT nuts of length 450 mm.

S&F 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors as in repair complete all as specified & directed by Engineer-in-Charge.

S&F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified & directed by Engineer-in-Charge.

Taking down chowkat or frames with shutter (without taking off shutters from the frame) not exc 1.5 sqm complete all as specified and directed.

Taking down chowkat or frames with shutter (without taking off shutters from the frame) exc 1.5 sqm but n.exc 4 sqm complete all as specified and directed.

S&F power coating aluminium frame for doors, windows ventilators with one of more rebates incl joining cleat for fixing etc complete all as specified and directed.

S&F powder coated anodised aluminium window and ventilator shutters, sliding type without sash bar, aluminium section weighing 0.55 Kg/m incl necessary joining cleats, glazing clips, rubber packing, anodised aluminium spap beading, screws etc complete all as specified and directed.

S&F UPVC window and ventilator with frame without sash bar, PVC section to be provide as per manufacture instructions and specifications as per IS norms , incl necessary joining cleats, glazing clips, rubber packing, anodised spap beading, screws etc complete all as specified and directed. (Note : Glass and wire mess to be paid saparately )

S&F powder coated anodised aluminium door shutters, aluminium section weighing .55 Kg/m incl necessary joining cleats, glazing clips, rubber neoprene packing, aluminium snap beading screws etc. complete all as specified and directed.

S&F stainless steel mild steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.4mm fixed with tinned tacks or galvanized wire staples complete all as specified.

S&F 3.0 mm thick sheet glass ordinary quality and glazing with oil putty in square exc 0.5 sqm in each pane complete all as specified and directed.

S&F 4.8 mm thick sheet glass ordinary quality and glazing with oil putty in square exc 0.5 sqm in each pane complete all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete including fixtures and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing unserviceable materials and making good disturbed surfaces of walls, floors etc.

M&L for point wiring surface type with single core 1.5 Sqmm PVC insulated unsheathed single core multistranded copper conductor cable (FRLS)including 1.5 Sqmm PVC insulated unsheathed copper conductor as earth continuity conductor drawn in and including ISI marked PVC casing caping not less than 20mm width with its accessories, and fixed in existing sunk boxes and covered with new 3.00 mm thick ISI marked laminated sheet cover and brass screw with cup washers for fixing switches/sockets/regulators etc.

(a) One light/CB point controlled by one switch

(b) One fan point controlled by one switch.

(c ) One 3 pin 5 Amps socket outlet point on independent board

(d) One 3 pin 5 Amps socket point on the same board with other switches

(e) One light point controlled by two two way switches

All as per srl item no 91 here-in-before but with cable 2.5 sqmm including 2.5 sqmm cable as earth wire for 15/16 amp socket.

M&L for point wiring with surface type with PVC insulated, unsheathed, single core multistandard copper conductor cable (FRLS) of size 1.5 Sqmm, 1100 volts grade including 1.5 Sqmm PVC insulated, unsheathed, copper conductor cable for earth continuity wire to be drawn through PVC conduit and fixed in sunk boxes and covered with 3.0mm thick ISI marked laminated sheet cover and brass screw with cup washers for switches/sockets/regulators etc.

(a) One light /CB point controlled by one piano type switch single pole one way.

(b) One fan point controlled by one switch.

(c) One 3/2 Pin 5 Amp socket out let point on the independent board.

(d) One socket outlet 3/2 pin, 5 Amp, point on the same board with other switches.

(e) One light point controlled by 2 way switch 5 amp single pole.

All as per srl item no 93 here-in-before but with cable 2.5 sqmm including 2.5 sqmm cable as earth wire for 15/16 amp socket.

M & L switch piano, flush type single pole, one way 5 Amps

M & L switch piano, flush type single pole, two way 15 Amps

M&L switch socket outlet 2in1, 3pin,5A

M&L switch socket outlet 2 in 1, 3 pin, 5 Amps and 15 Amps flush type.

M&L ceiling rose surface bakelite 65x50 mm two to three terminals.

Supply and fix steped type electronic fan regulator flush type, 230 volt, AC complete.

M&L bell push, flush type, 5 Amps.

M&L call bell AC, 230 volts single pole.

S&Fin repairs single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of capacity 10 Amps all as specified and directed .

S&F in repairs MCB, DB double door type, made out of CRCA mild steel sheet flushed in wall, SPN 4 way with 200 Amps rated bus bar , 240 volts IP-43, with PVC MCB blanking plates, stove enamelled, dust and vermin proof suitable for incorporation of MCB's and isolators etc including complete all as specified and as directed.

S&F in repairs MCB DB for 8 way, double door 240 Volts 200Amps rated bus bar 240 volts IP-43, with PVC MCB blanking plates, stove enamelled, dust and vermin proof suitable for incorporation of MCB's and isolators etc including complete all as specified and as directed.

Supply and fixing in repairs MCB TPN 415 Volt 63 Amps complete all as specified and as directed.

Supply and fixing in repairs MCB SPN 6 - 40 Amps, 240 Volts complete all as specified and as directed.

Supply & fixing in repairs MCB SP 06-40 Amp, AC, 240 volts, complete all as specified and as directed.

M&L sub main wiring surface type with two runs of single core, PVC insulated, unsheathed multi standard copper conductor cable of size 4 Sqmm, 1100 volts grade (FRLS) and one run of 6 Sqmm PVC insulated multi stranded copper conductor for earth continuity conductor drawn through existing conduit including taking down of existing complete all as specified and as directed. (Note :- Two runs of 4 Sqmm cable, one run of 4 Sqmm continuity earth wire and one run of PVC conduit with all necessary accessories will be measured as one length).

M&L sub main wiring surface type with two runs of single core, PVC insulated, unsheathed multi standard copper conductor cable of size 6 Sqmm, 1100 volts grade (FRLS) and one run of 6 Sqmm PVC insulated multi stranded copper conductor for earth continuity conductor drawn through existing conduit including taking down of existing complete all as specified and as directed. (Note :- Two runs of 6 Sqmm cable, one run of 6 Sqmm continuity earth wire and one run of PVC conduit with all necessary accessories will be measured as one length).

Supply and fixing in repairs surface mounted Mini Mirror light LED batten 2feet with extruded aluminium housing and robust construction 10 W system lumen with all accessories if required flexible copper 2 core wire from fitting to ceiling rose all as specified and directed by Engr-in-Charge.Make- Crompton cat part No- CCS-103-05-65-SL-DP-NWH or equivalant of Baja/Philips

2. Supply and fixing in repairs surface & wall mounted LED batten 4feet with extruded aluminium housing and robust construction 20 W system lumen including flexible copper 2 core wire from tube light fitting to ceiling rose required length with all accessories all as specified and directed by Engr-in-Charge. Make- Crompton cat part No- CCS-103-20-65-SL-DP-NWH or equivalant of Wipro/Philips

4 S&F in repairs LED Bulkhead light fitting 10 Watt Environmental friendly , ultra modern , energy saving , surface mounted , decorative oval bulk haed edge lit LED luminarie comprising of high brightness LEDs including connetcion of fllexible copper wire 2 core from fitting ceiling rose/connection point Make- Crompton cat part No- LBHP -10-CDL or equivalant of Wipro/Philips

Supply and fixing in repairs LED recess mounting 2x2 fittings full fit luminarie with glare free uniform illumination with longer life and less maintainance 36 Watt Make- Crompton cat part No LCTLRFF7-36-CDL or equivalent of Bajaj/Philips

M&L for opening , cutting and taking out complete winding coils of ceiling fan of 1200/1400mm sweep of any make , rewinding the same with super enamaled copper winding wire as per original pattern including varnishing complete and asembly after oiling greasing and replacing the worn out nut bolts and washers bearings etc and testing the ceiling fans on load for two hours complete all as specified and directed.

All as per item No-115 here in before but exaustfan of sweep 250/300mm

M & L earthing complete with GI earth plate Electrode 60 cm x 60 cm x 6 mm thick burried directly in ground (earth plate not less than 2.25 Metre deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level connected to galvanished earth wire 4.0 mm dia by means of bolts, nuts check and washers of GI or steel all as shown in electrical plate No. 3 of SSR Pt -I connected to earthing test point all as specified or indicated including GI pipe 15 mm dia light grade for earth wire protection, necessary excavation, earth work in any type of soil, PCC chamber and RCC cover slab, connecting lead wire from test point to DB complete all as specified & as directed

Supply and fix of ceiling fan complete with electronic type regulator and accessories 230 V, 1200mm sweep, BEE 5 star rated, ISI standards, RPM1200,340 Air Delivery 200CMM, down rod length 267mm, rust - free powder coated finish and pre-wired and including connecting up with twin core twisted flexible copper conductor cable with connector including dismatling old one deposit to AGE E/M Store yard complete. Make - Bajaj Kassels 50 ISI Product code 250468 or equivalent make of Havells/CG

Supply and PVC Body sound proof Exhuast fan 250 mm size with single phase 230 Volt 900 RPM with louvers complete.making a hole in wall or exsinting windo grill cutting and 12mm plywood suitable size of exaust fan make hole and fixing the window nutr bolt washers and after finishing work distrubed surface of wall complete all as specified and directed by Engr-in - Charge Make- Bajaj Product code 70049 or equivalant to Havells/CGUsha /Baja/CG

S&F in repairs Plug top 3 pin 15A ISI marked complete all as specified and as directed. Make- Anchor /Plaza/Kinjal

S &F in repairs Plug top 3 pin 5A ISI marked complete all as specified and as directed. Make- Anchor /Plaza/Kinjal

S& F in repairs Capacitor of rating 2.5/3.15 mfd 230 V complete all as specified and as directed.

S&F in repairs Heating element 1500/2000Watt round Type complete all as specified and as directed.

S&F in repairs Heating element 1500/2000Watt triangular type complete all as specified and as directed.

S&F in repairs Thermostat for 25/50 Ltr cap geyser and making connection complete all as specified and as directed.

S&F in repairs PVC connection 15 mm bore with PTMT nuts of length 450mm complete all as specified and as directed.

S&F in repairs PVC connection 15 mm bore with PTMT nuts of length 600mm complete all as specified and as directed.

S&F in repairs Switch Piano Type 5 Amps complete all as specified and as directed. Make- Anchor /Plaza/Kinjal

S&F in repairs Switch Piano Type 15 Amps complete all as specified and as directed. Make- Anchor /Plaza/Kinjal

S&F in repairs Socket outlet 5 Amps complete all as specified and as directed. Make- Anchor /Plaza/Kinjal

S&F in repairs Socket outlet 15 Amps complete all as specified and as directed. Make- Anchor /Plaza/Kinjal

S&F in repairs Socket combine 5 Amps complete all as specified and as directed. Make- Anchor /Plaza/Kinjal

S&F in repairs Socket combine 15 Amps complete all as specified and as directed. Make- Anchor /Plaza/Kinjal

S&F in repairs 5 Amp Gang box complete all as specified and as directed. Make- Anchor /Plaza/Kinjal.

S&F in repairs 15 Amp Gang box complete all as specified and as directed. Make- Anchor /Plaza/Kinjal.

S&F in repairs Fan Regulator switch type complete all as specified and as directed. Make- Anchor /Plaza/Kinjal.

S&F in repairs Fan Regulator socket type Make- Anchor /Plaza/Kinjal .

S & F in repairs Insulation Tape 20Mtr length complete all as specified and as directed. .

S&F in replacement PVC copper cable 1.5 sqmm 180 RM length complete all as specified and as directed. Make- Anchor.

S&F in replacemnt PVC copper cable 2.5 sqmm 180 RM Length complete all as specified and as directed. Make- Anchor.

S&F in replacement PVC copper cable 4 sqmm 180 RM Length complete all as specified and as directed.Make- Anchor.

S&F in replacement PVC flexible twin core wire 1.5sqmm copper 45 RM Length complete all as specified and as directed. Make- Anchor.

S&F in replacement Service cable PVC aluminium straned conductor cable 2 core 6 sqmm complete all as specified and as directed.

S&F in replacement Service cable PVC aluminium straned conductor cable 2 core 10 sqmm complete all as specified and as directed.

S&F in replacement of hanging bell switch 6Amps all as specified and as directed. Make- Anchor

S&F in replecement of surface bell push wsitch 6 amps all as specified and as directed. Make- Anchor

S&F in replacemnt of Modular Switch 1 Module 10 Amps all as specified and as directed. Make- Anchor

S&F in replacemnt of Modular Bell push 1 Module 10 Amps all as specified and as directed. Make- Anchor

S&F in replacemnt of Modular regulator 100Watt step type 1 Module all as specified and as directed. Make- Anchor

S&F in replacemnt of Modular regulator 100Watt step type 2 Module all as specified and as directed. Make- Anchor

SREE CONSTRUCTIONS