Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.4 LAccepted-AOC MJ NAGAR INDI PLOT NEAR NEW APMC DHARWAD 580006 | DHARWAD | KARNATAKA | 580006 | ₹2.4 L | L1 | Accepted-AOC L1 |
| 2 | L2₹2.9 LAccepted-AOC | ₹2.9 L | L2 | Accepted-AOC L2 |
| 3 | L3₹3.3 LAccepted-AOC | ₹3.3 L | L3 | Accepted-AOC L3 |
| Sl No | Description | Qty | Unit | SRS ELECTRICALS | SANA ELECTRICALS | ANJALI ELECTRICALS |
|---|---|---|---|---|---|---|
| 1.00Electrical Repair Work, Supply & fixing of Light fixtures at Boys & Girls Hostel No 7, 8 &9 NFSU Dharwad Campus | ||||||
| 1.01 | Supplying and fixing of 6A One Way Switch modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. | 4 | Each | 400 ₹400 | 380 ₹448.40 | 320 ₹377.60 |
| 1.02 | Supplying and replacing ceiling fan regulator 900mm to 1500mm. | 6 | Each | 5,100 ₹5,100 | 1,800 ₹2,124 | 2,280 ₹2,690.40 |
| 1.03 | Supplying and fixing of 16A One Way Switch modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. | 5 | Each | 1,000 ₹1,000 | 800 ₹944 | 500 ₹590 |
| 1.04 | Supplying and fixing of 6/16A Universal modular Socket & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. | 8 | Each | 2,200 ₹2,200 | 1,680 ₹1,982.40 | 1,680 ₹1,982.40 |
| 1.05 | Supplying & fixing of retrofit type - LED bulb 3 W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI> 70%. efficacy >80 lumen per W, life> 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver integrated in the system, with PF > 0.95, power loss should < 5% of lamp Wage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. | 35 | No’s | 3,500 ₹3,500 | 2,975 ₹3,510.50 | 3,850 ₹4,543 |
| 1.06 | Supplying & fixing of retrofit type - LED bulb 9 W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI> 70%. efficacy >80 lumen per W, life> 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver integrated in the system, with PF > 0.95, power loss should < 5% of lamp Wage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. | 25 | Each | 3,750 ₹3,750 | 3,125 ₹3,687.50 | 2,975 ₹3,510.50 |
| 1.07 | Supplying and fixing of LED light fitting 1 x 4feet-PVC Batten with integrated LED tube 20-20 W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI > 80. Power Input: 220-240V@ 50/60Hz & Power factor >0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. | 48 | Each | 19,200 ₹19,200 | 14,880 ₹17,558.40 | 21,600 ₹25,488 |
| 1.08 | Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires, required Nos of round blocks and clamps (On wall/ ceiling / Rafter / Girders) | 48 | Each | 2,400 ₹2,400 | 2,400 ₹2,832 | 4,848 ₹5,720.64 |
| 1.09 | Supplying of 48" Sweep (1200 mm) Regular model capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230V, 50 cycles. Single phase AC supply conforming to ISS-374-1979 and with double ball bearing system. | 20 | Each | 50,000 ₹50,000 | 33,800 ₹39,884 | 48,000 ₹56,640 |
Tender Value
Refer Docs
Closing Date
23 Oct 2025, 12:00 pmClosed
Campus Director
NFSU Dharwad Campus, WALMI, Near High Court Dharwad, Belur Industrial Area, Dharwad
Tender for supply, Installation and Repair of electrical fixtures and wiring works at Hostels, Laboratories and Computer Lab at NFSU Dharwad Campus
2025_NFSU_880729_1
NFSU/Dwd/T/CPPP/E/2025/02
Open Tender
Electrical Works
21 days
NFSU Dharwad, WALMI, Belur Industrial Area
Please refer Tender documents.
5 documents required · 5 mandatory
₹0
Exempted
5 Jan 2026
10 Oct 2025
24 Oct 2025
10 Oct 2025
23 Oct 2025
10 Oct 2025
10 Oct 2025 - 21 Oct 2025
Electrical Repair Work, Supply & fixing of Light fixtures at Boys & Girls Hostel No 7, 8 &9 NFSU Dharwad Campus
Supplying and fixing of 6A One Way Switch modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.
Supplying and replacing ceiling fan regulator 900mm to 1500mm.
Supplying and fixing of 16A One Way Switch modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.
Supplying and fixing of 6/16A Universal modular Socket & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.
Supplying & fixing of retrofit type - LED bulb 3 W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI> 70%. efficacy >80 lumen per W, life> 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver integrated in the system, with PF > 0.95, power loss should < 5% of lamp Wage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition.
Supplying & fixing of retrofit type - LED bulb 9 W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI> 70%. efficacy >80 lumen per W, life> 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver integrated in the system, with PF > 0.95, power loss should < 5% of lamp Wage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition.
Supplying and fixing of LED light fitting 1 x 4feet-PVC Batten with integrated LED tube 20-20 W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI > 80. Power Input: 220-240V@ 50/60Hz & Power factor >0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition.
Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires, required Nos of round blocks and clamps (On wall/ ceiling / Rafter / Girders)
Supplying of 48" Sweep (1200 mm) Regular model capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230V, 50 cycles. Single phase AC supply conforming to ISS-374-1979 and with double ball bearing system.
Fixing a ceiling / Wall mounting fan of all capacities and all types to the existing 'S'' hook with fan regulator to the existing board together with supplying and fixing 5 A. ceiling rose, necessary length of 23 / 0.0076 inch PVC insulated twin twisted copper wire and wiring.
Supplying and fixing/replacing of 15mfd condenser for ceiling fan/MV/ SV/MH and other luminaries.
Supplying And fixing/replacing of 6A Batten Holder electrical accessories on existing switch board.
Providing and Fixing of Electrical work for setting up Accident lab (Room No 303), Arson lab (Room No 306), Questioned Document lab (Room No 307), Biology and Wildlife lab (Room No.315) in NFSU, Dharwad Campus.
Supplying and fixing of PVC casing and capping on the wall or ceiling using necessary materials like bends, junction box, elbows, screws at an interval of 300 mm etc. as required. 25 mm
Supplying PVC flexible conduit pipe .... mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300 mm using NF screws and on either end of the pipe terminated completely 25 mm
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694: confirming to latest amendments.
1.5Sqmm Wire
2.5Sqmm Wire
4Sqmm Wire
Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/NF screws etc., complete. 12 Way
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nut etc., complete on the existing metal/PVC box. 12 Module
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.
16A One Way Switch
6/16A Universal Socket
Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 50-63 A DP
Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clA, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coated painting Made out of 14 SWG MS enclosure. II - Double Door 2 Way MCB Enclosure box
Providing and Fixing of Electrical work for setting up computer lab (206) in NFSU, Dharwad Campus
Supplying PVC flexible conduit pipe .... mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300 mm using NF screws and on either end of the pipe terminated completely
Supplying and fixing of PVC casing and capping on the wall or ceiling using necessary materials like bends, junction box, elbows, screws at an interval of 300 mm etc. as required. 38 mm
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694: confirming to latest amendments.
4Sqmm Wire
6Sqmm Wire
10Sqmm Wire
Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.
Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clA, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coated painting Made out of 14 SWG MS enclosure. II- Double Door
4 Way SP & N
12 Way SP & N
Screw Box Box (38 mm)
PVC Screw Grip packet
Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/NF screws etc., complete. 12 Way
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nut etc., complete on the existing metal/PVC box. 12 Module
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.
16A One Way Switch
6/16A Universal Socket
Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for working voltage upto 1100 Volts as per IS-694:1990
Supplying and fixing 5 Amp 3 pin top.
Bidder Name
SRS ELECTRICALS
ANJALI ELECTRICALS
SANA ELECTRICALS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.50 MB
BOQ_925732.xls
BOQ • 0.41 MB
Electricalworktender2.pdf
Tender Documents • 0.51 MB
Download all tender documents and submit your bid