Procurement of different fasteners for OandM unit no 8and9 of DTPS, HTPS, Kasimpur, Aligarh

HT Allen Bolt, M20x60mm, Full Thread, Grade 10.9 Make- TVS/ Unbrako

HT CSK, M20x60mm full thread, grade-12.9 Make- TVS/ Unbrako

HT Allen Bolt, M14x60mm, Full Thread, Grade-10.9 Make- TVS/ Unbrako

HT Allen Bolt, M20x200mm, 1/3 Thread, Grade 10.9 Make- TVS/ Unbrako

HT Allen Bolt, M12x50mm, Full Thread, Grade-10.9 Make- TVS/ Unbrako

HT Hex Bolt, M16x65mm, half Thread with nyloc nut, Grade-10.9 Make- TVS/ Unbrako

Allen bolt M 16x50 H.T. Steel grade- 10.9 Full threaded with nut and 02 nos spring washer. Make-Any standard make

Allen bolt M 12x40 H.T. Steel grade- 10.9 Full threaded with nut and 02 nos spring washer. Make-Any standard make

H.T. Bolt M 6x30 Full Threaded with Nut & 2 No. Spring washer H.T. Steel grade- 10.9 Make-Any standard make

H.T. Bolt M 8x12 Full Threaded with Nut & 2 No. Spring washer H.T. Steel grade- 10.9 Make-Any standard make

H.T. Bolt M 8x60 Full Threaded with Nut & 2 No. Spring washer H.T. Steel grade- 10.9 Make-Any standard make

H.T. Bolt M 10x30 Full Threaded with Nut & 2 No. Spring washer H.T. Steel grade- 10.9 Make-Any standard make MOC- Silicon Rubber

H.T. Bolt M 12x40 Full Threaded with Nut & 2 No. Spring washer H.T. Steel grade- 10.9 Make-Any standard make

H.T. Bolt M 12x185 Full Threaded with Nut & 2 No. Spring washer H.T. Steel grade- 10.9 Make-Any standard make

H.T. Bolt M 20x40 Full Threaded with Nut & 2 No. Spring washer H.T. Steel grade- 10.9 Make-Any standard make

H.T. Bolt M 20x70 Full Threaded with Nut & 2 No. Spring washer H.T. Steel grade- 10.9 Make-Any standard make

Stud M 20x180 Full Threaded with Nut & 2 No. Spring washer H.T. Steel grade- 10.9 Make-Any standard make

Stud M 20x210 Full Threaded with Nut & 2 No. Spring washer H.T. Steel grade- 10.9 Make-Any standard make

H.T. Bolt M 30x250 Full Threaded with Nut & 2 No. Spring washer H.T. Steel grade- 10.9 Make-Any standard make

Stud M 16x100 Full Threaded with Nut & 2 No. Spring washer H.T. Steel grade- 10.9 Make-Any standard make

Stud M 22x130 Full Threaded with Nut & 2 No. Spring washer H.T. Steel grade- 10.9 Make-Any standard make

Stud M 24x200 Full Threaded with Nut & 2 No. Spring washer H.T. Steel grade- 10.9 Make-Any standard make

HEX HD SCREW M6X16 MOC-HT,Grade not less than 8.8, make-LPS/TVS/UNBRAKO

HEX HD SCREW M 10X25 WITH NUT AND WASHER MOC-HT,Grade not less than 8.8, make-LPS/TVS/UNBRAKO

HEX HD SCREW M20X80 , WITH NUT AND WASHER MOC-HT,Grade not less than 8.8, make-LPS/TVS/UNBRAKO

HEX HD SCREW M20X70 MOC-HT,Grade not less than 8.8, make-LPS/TVS/UNBRAKO

HEX HD SCREW M 12X30 MOC-HT,Grade not less than 8.8, make-LPS/TVS/UNBRAKO

HEX NUT M20 MOC-HT,Grade not less than 8.8, make-LPS/TVS/UNBRAKO

SCREW CAP SOC M20X75 MOC-HT,Grade not less than 8.8, make-LPS/TVS/UNBRAKO

SCREW CAP SOC M20X60 MOC-HT,Grade not less than 8.8, make-LPS/TVS/UNBRAKO

HEX SCREW M 10X70 MOC-HT,Grade not less than 8.8, make-LPS/TVS/UNBRAKO

SOC HD CAP SCREW M24X90 MOC-HT,Grade not less than 8.8, make-LPS/TVS/UNBRAKO

SOC HD CAP SCREW M22X90 MOC-HT,Grade not less than 8.8, make-LPS/TVS/UNBRAKO

HEX HD HT BOLT (HALF THREADED) M18X100 MOC-HT,Grade not less than 8.8, make-LPS/TVS/UNBRAKO

HEX HD HT BOLT( HALF THREADED) M20X100 with nut and washer MOC-HT,Grade not less than 8.8, make-LPS/TVS/UNBRAKO

SCREW HEX M33X90 MOC-HT,Grade not less than 8.8, make-LPS/TVS/UNBRAKO

SCREW HEX M36X100 MOC-HT,Grade not less than 8.8, make-LPS/TVS/UNBRAKO

SCREW HEX M36X180 MOC-HT,Grade not less than 8.8, make-LPS/TVS/UNBRAKO

SOC HD CAP SCREW M12X40 with nut and washer MOC-HT,Grade not less than 8.8, make-LPS/TVS/UNBRAKO

SCREW HEX M36X110 MOC-HT,Grade not less than 8.8,60 make-LPS/TVS/UNBRAKO

SPRING WASHER DIA 36 MOC-HT,Grade not less than 8.8, make-LPS/TVS/UNBRAKO

HEX HDM 12X120 MOC-HT,Grade not less than 8.8, make-LPS/TVS/UNBRAKO

BOLTS, HALF FINE THREADED (1MM PITCH) M18X100 with nut and washer MOC-HT,Grade not less than 8.8, make-LPS/TVS/UNBRAKO

SCREW HEX P M 16X50 with nut and washer MOC-HT,Grade not less than 8.8, make-LPS/TVS/UNBRAKO

HT HEX HEAD BOLT with nut and washer M16X80 MOC-HT,Grade not less than 8.8, make-LPS/TVS/UNBRAKO

HT HEX HEAD BOLT with nut and washer M12X40 MOC-HT,Grade not less than 8.8, make-LPS/TVS/UNBRAKO

HT HEX HEAD BOLT with nut and washer M12X120 MOC-HT,Grade not less than 8.8, make-LPS/TVS/UNBRAKO

HT HEX HEAD BOLT with nut and washer M10X80 MOC-HT,Grade not less than 8.8, make-LPS/TVS/UNBRAKO

HT HEX HEAD BOLT with nut and washer M16X60 MOC-HT,Grade not less than 8.8,

SS NUT M16 MOC-HT,Grade not less than 8.8, make-LPS/TVS/UNBRAKO

Allen Bolt, quarter thread M10X200 required for clamping cylinder head Make- TVS/Unbrako

HT Coupling Bolts, with bush and nut, size M16X80 required for apron gear box Make- TVS/Unbrako

HT Hex Bolt, 10.9 Grade, Half Threaded along with Nylock nut M16X70 required for clamping pad, section gear and cylinder guard Make- TVS/Unbrako

Hex Nylock nuts M-16 required for section gear Make- TVS/Unbrako

HT 8.9 Grade bolts, Half Threaded along with matching nuts M24X120 required for apron foundation bolt Make- TVS/Unbrako

HT 8.9 Grade bolts, Half Threaded(1 mm pitch) along with matching nuts M24X80 required for apron gear box coupling Make- TVS/Unbrako

HT 8.9 Grade Bolts, Full threaded along with matching nuts M10X70 required for tippler stand Make- TVS/Unbrako

HT 8.9 Grade bolts, Half threaded along with matching nuts M16X100 required for support of rubber pad Make- TVS/Unbrako

HT 8.9 Grade bolts, Half threaded along with matching nuts M16X40 required for servo motor of tippling Make- TVS/Unbrako

HT 10.9 Grade bolts, Half Threaded(1 mm pitch) along with matching nuts M40X320 required for main housing of tippler Make- TVS/Unbrako

HT 10.9 Grade bolts, Half Threaded(1 mm pitch) along with matching nuts M30X150 required for coupler of SAC boom and rack & pinion Make- TVS/Unbrako

HT 10.9 Grade bolts, Half Threaded(1 mm pitch) along with matching nuts M24X200 required for SAC rail fixing Make- TVS/Unbrako

HT 10.9 Grade bolts, Half Threaded(1 mm pitch) along with matching nuts M30X200 required for apron hausing base Make- TVS/Unbrako

HT 8.9 Grade bolts, Half Threaded(1 mm pitch) along with matching nuts M20X70 required for guide roller fixing Make- TVS/Unbrako

HT 8.9 Grade bolts, Half Threaded(1 mm pitch) along with matching nuts M20X180 required for apron hausing Make- TVS/Unbrako

HT 8.9 Grade bolts, Half Threaded(1 mm pitch) along with matching nuts M20X130 required for apron foundation Make- TVS/Unbrako

HT 10.9 Grade bolts, Half Threaded(1 mm pitch) along with matching nuts M24X130 required for apron foundation Make- TVS/Unbrako

HT 8.9 Grade bolts, Half Threaded(1 mm pitch) along with matching nuts M24X100 required for tippler support beam Make- TVS/Unbrako

HT 8.9 Grade bolts, Half Threaded(1 mm pitch) along with matching nuts M24X70 required for rack pinion of side arm charger and plateform locking Make- TVS/Unbrako

SHAHJAHAN ENGINEERING WORKS

SWADESHI UDYOG SHALA