Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹24.5 LAccepted-Finance | L1 | Accepted-Finance less rate | |
| 2 | L2₹25.1 L+₹55,060.67 (2.25%)Rejected-Finance | L2 | Rejected-Finance above rate |
Tender Value
Refer Docs
EMD Value
₹25,000
Closing Date
23 Nov 2022, 3:00 pmClosed
Block Development Officer
Block Development Office (VP),Budalur,Thanjavur
Thanjavur District Work No 29 Creating and Upgradation of Infra-Public Utilities in Construction of Panchayat Office Building at Maraneri Panchayat of Budalur Block in Thanjavur District under AGAMT II - 2022-2023 Tranche
2022_RDTN_264228_1
Rc.No.3029/2022/A3 Dated 26.10.2022
Open Tender
Civil Works - Buildings
Item Rate
180 days
Budalur
Please refer Tender documents.
9 documents required · 9 mandatory
₹0
₹25,000
Yes
16 Dec 2022
15 Nov 2022
23 Nov 2022
16 Nov 2022
23 Nov 2022
16 Nov 2022
Amount
Construction of Panchayat Office Building at Maraneri Panchayat.
Earth work Excavation and depositing on bank with initial lead and lift in all classes of soil except hard rock requiring blasting including all labour charges etc.,complete for foundation
Supplying and Filling foundation and basement with filling sand in layers not more than 15cm . Thick well ramed, watered and compacted Complete complying with stanard specification.
Cement concrete 1 : 4 : 8 mix using 40mm HBG metal for foundation including watering wherever necessary and laid in layers of not more than 15cm thick., compacting etc., complete complying with standard specifications and as directed. .
Brick work in cement mortar 1:5 mix using country bricks 83/4"x41/4"x21/4" including cost and conveyance of all materials to site and all labour charges etc complete
Below Basement
Above Basement
Supplying & Erecting centering for sides & soffiots including necessary supports & strutting upto 3.29m height for plane surfaces in all floors with all cross bracings using mild steel sheets of size 90 x 60cm & 10 gauge stiffened, welded with steel angle of size 25 x 25 x 3mm for boarding laid over silver oak joists(Country wood) of size 10 x 6.5cm spaced @ about 90cm c/c and supported by casurina props of 10 - 13cm dia. spaced @ 75cm c/c etc., complete complying with standard specifications and as directed by the departmental officers. Rate for 10m2.for the following items.(RCC floor slab, roof slab, Rectangular/ square, Tee/ Ell beams, Lintels, staircase waist slabs, Landing slabs, Landing beam, Portico beam etc., ).
Below GL
Above GL
Supplying and Fabricating and placing in position MS steel or ribbed for steel for all reinforced cement concrete works as per the design given including cost of steel and binding wire in all floors etc, Complete complying with stanard specification.
Reinforced Cement concrete 1:1.5:3 using 20mm ISS HBG metal for all RCC item of works excluding cost of Rein forcement and fabricating charges, centering and shuttering but including curing and providing fixtures like fan clamps in the RCC floor or roof slabs wherever necessary and bearing surfaces of walls , sides and bottom of the slabs, beams etc., shall be finished smooth with cement mortar 1:3, 12mm thick. and with kraft paper without claiming extra as directed by the departmental officers complete complying with standard specifications
Providing granolithic flooring with CC 1:2:4 mix 20mm thick including cost and conveyance of all materials to site and all labour charges etc complete
Paving the Floor with Ceramic tiles400x400x7mm thick including cost and conveyance of all materials to site and all labour charges etc completee
Dadooing with glazed tiles of size 300x200x6mm including cost and conveyance of all materials to site and all labour charges etc complete
Finishing the top of the roof with one course of Machine PressedTiles of size 20x20x2 cm of approved quality laid in CEMENT MORTAR 1:3(One cement and three sand) 12 mm thick mixed with water proofing compound conforming to ISS by 2% weight of cement used and the joint pointed neatly to full depth of tiles with the same water proofing compound mixed with cement mortar,red oxide, etc., complete complying with standard specification
Plastering with CM 1:3,10mm thick inculding cost and conveyance of all materials to site and all labour charges etc.,complete
Plastering with CM 1:5,12mm thick inculding cost and conveyance of all materials to site and all labour charges etc.,complete
Whitewash two coats using including cost and conveyance all materials two labour charges etc
Distempering two coats over priming coat inculding cost and conveyance of all materials to site and all labour charges etc complete
Exterior emulsion two coats over priming coat inculding cost and conveyance of all materials to site and all labour charges etc complete
Fabrication and supply of mild Steel Doors and Windows of any size with single leaf outer frame made of 35x35x5 mm equal M.S angle and shutter frame made of 25x25x5 mm M.S angle for horizontal and vertical member with stiffener and fully covered with 18mm tk gauge MS sheets including cost and conveyance of all charges etc complete as per standards.
Steel Door1 ( 1.10 x 2.10 )
steel window (1.2 x 1.30 m)
steel window (1.50 x 1.30 m)
Rolling Shutter (1.50x1.30m)
Solid PVC Door Shutter using 19 gauge 19mm MS sq. tubes for styles and outer frames, 15mm MS sq tubes for top lock and bottom rails. the sheet tubes shall be covered with 5mm thick and solid PVC sheets. including all charges etc complet
Fabrcation and supply of steel grill gate using structural steel in all aspects as directed
Painting two coats over new iron works using ready mixed enamel paint inculding cost and conveyance of materials and all labour charges etc.,complete
wiring with 2x 1.5 sq mm (22/0.3)pvc insulated copper conducted 11oo voltage garde pvc rigid piupe on wall and ceiling with pvc accecosries and with TW Swutch 150mm x100mmx113mm TW Switch box with 3mm thick Fan Point/Light Point (SD 18)
wiring with 2x 1.5 sq mm (22/0.3)pvc insulated copper conducted 11oo voltage garde pvc rigid piupe on wall and ceiling with pvc accecosries and with TW Swutch 150mm x100mmx113mm TW Switch box with 3mm thick PVC Plug Point (SD 38)
Supply and fixing of TNEB Meter Board SD 125
Supply and fixing of 1200 mm (48") AC ceiling fan complete with stepped electronic 300W regulator with 300mm down rod on the existing clamp (SD 110)
Supply and run of 2x 1.5sqmm(22/-.3) PVC Insulated SC Unshealthed copper conducter of 1100 v grade in 25mm dia GI Piper (class "B") Suitably bent at both ends with necessary angle iron upright and end suppoorts of main(SD 69)
Supply and fixing of WT bulk head fitting with guard (philips/ Bajaj/ crompton/ K.Lite) suitable for 11W CFL lamp with CFL (SD 83)
Supply and fxing of single box type 4'40W Fluorecesnt fiting complete with copper choke and condensor with TW round blocks on wall or ceiling with flu tube with PVC Unsheathed copper leads from trmnals to the fitting(SD 88)
Supply and fixing of 16AMPS dpic Switch of 500 V with fuse and neutral on suitable TW Box PWD Earthing(SD 142)
Providing and fixing of PVC rain water down fall pipe 110mm dia with necessary T W Clamps, Plug, Shoes, bend, Screws, nails etc., complete
PVC sintex tank Including all charges etc,Complete
Supply and fixing of in position of European closet with fittings and 10lit capacity flushing tank of approved quality including cost and conveneyance of all etc., complete
Supply and fixing of in position of Indian closet with 580x440mm tank of approved quality including cost and conveneyance of all etc., complete
Provision for Name board charges
GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}
CHINNADURAI
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .