Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.5 LAccepted-AOC | L1 | Accepted-AOC L1 ACCEPTED | |
| 2 | L2₹2.5 L+₹2,866.20 (1.16%)Rejected-Finance | L2 | Rejected-Finance L2 REJECTED |
Tender Value
₹3.8 L
EMD Value
₹3,800
Closing Date
21 Mar 2024, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
the commissioner
tambaram city municipal corporation
Repair and Maintenace of Toilet at Perungalathur Bus stand in ward no.61 in zone 4 TCMC
2024_MAWS_449412_38
333/2024/E1 z4
Open Tender
Civil Works
Works
perungalathur tambaram
Please refer Tender documents.
1 document required · 1 mandatory
₹0
₹3,800
15 Jul 2024
16 Mar 2024
21 Mar 2024
16 Mar 2024
21 Mar 2024
16 Mar 2024
Amount
Earth work open excavation in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the excavated earth with a lead of 10 mts. within the compound in places shown by the departmental officers and clearing and levelling the site, etc., complete complying with standard specification.
Supplying and filling in foundation, basement, etc with filling crusher stone dust in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers.
Cement Concrete 1:4:8 (One cement, four fine aggregate and eight course aggregate) mix using 40mm HBG ISS metal from approved quarry including cost and conveyance of all materials to site and labour charges, including dewatering if found necessary and laid in layers of not more than 15cm thick and compacted etc., complete complying with standard specifications as directed by the departmental officers
Brick work in CM 1:5 (one cement & five sand) using III class ground moulded bricks of size 8 3/4"X4 1/4" X 2 3/4" including finishing, curing, etc., complete complying with standard specification - 100CFT
Basement
SuperStructure
Centering for soffits of RCC slabs of plane surface like lintels, beams ,etc.,including strutting 3m high using mild steel sheets of size 90cm X 60cm X and B.G 10 stiffened with M.S angles of size 25mm X 25mm X 3mm laid over silver Oak (C.W) joists of size 10cm X 6.5cm (spaced at about 90cm c/c )and supported dy casurina props of 10cm to 13cm dia (spaced of 75cm C/C) complying with standard specification and directed - 10 m 2 (P & D)Data 38
Suppling and fabricating and placing in position MS (or) R.T.S. bar for reinforcement to all RCC works as per the design given including cost of steel and binding wire also in all floors.
Reinforced Cement concrete 1:1.5 :3 (one cement, one and half sand & three course aggregate) using 20mm gauge hand broken/ and broken granite stone for all RCC items of works excluding centering shuttering and cost of reinforcement but including curing etc.,complete and also including fixing fan clamps and fixtures in rcc works wherever necessary as directed by departmental officer etc., complete.
Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over one coat of red oxide priming coat in all floors including cost of priming coat etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)
Manufacturing, supplying and fixing of Steel Door (Single Leaf) with following specification. MS angle of size 40 x 40 x 6mm at 3.5 kg. / m used for outer frame and MS Angle of size 35 x 35 x 5mm at 2.6 kg. / m for the shutter frame. Stiffeners with 32 x 6mm at 1.5 kg. / m MS Flat is provided as the lock rail of the door and welded intact on both ends to the shutter frame. 18G CR Sheets of best quality is laid as panel in the shutter frames. 18 x 5mm at 0.70 kg. / m MS Flat is welded over the 32 x 6mm at 1.50 Kg. / m MS Flat on the rear side of the door, sandwitching the CR Sheet for rigidity. Additional stiffeners with 18 x 5mm at 0.7 Kg. / m MS Flats are provided diagonally on the rear side of the shutter. 300mm length of hinges 2 Nos. for shtter is provided. 6 Nos. of 200mm length hold fasts specified at the ends are welded to the outer frame of the door. Tower bolt 2 Nos. at the top provided. 250 x 16mm size of two aldrops are provided in single leaf door at lock rail section in the door for inner and outer provided and one rotating locking arrangements for the inner side of the door and additional provision for locking arrangements for lock is provided on the rear sideof the door at an appropriate place and 1 No. of MS handle of heavy duty. A tie bar is provided at the bottom of the outer frame to prevent twisting of the frame during transportation and fixing. All members are given one coat of red oxide primer as directed by the departmental officers. The rate includes cost of all materials, labour charges, transportation, taxes and all other incidental charges, etc., complete, complying with standard specifications. (Single Leaf)
Plastering with Cement Mortar 1:5 (One cement and Five sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers.
Dadooing walls with Glazed tiles of sizes 305mm X200mm X 6mm size of approved make and quality and colour l Set in cement mortar 1:2 (one cement ,two sand) over 10 mm base layer plastering and pointing with white cement neatly as directed.
Colour washing two coats in all floors using best freshly burnt white shell lime and best quality of approved variety of colouring pigment including cost of lime, colouring pigments, fevicol type gum, brushes, scaffolding charges etc., complete complying with standard specification. Mineral colouring pigments not affected by lime should only be used (stainers and colour solutions should not be used.)
Paving the floor with design Antiskid ceramic tiles (colour and shade as directed) of size 305 mm x 305mm x 6 mm in all floors over a base layer of cement mortar 1:3 (one cement and three sand) 20mm thick laid in-situ and pointed with same coloured cement etc, complete as per standard specification.
Flooring with following ceramic tiles of size 305 x 305 x 6 mm laid over 20 mm thick cement mortar 1:3 (One Cement and Three Sand) base mortar over the existing slab / floor including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with white cement mixed with colouring pigment at the rate of 0.3 Kg. / sq.m. etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)
Finishing the top of roof with one course of machine pressed tiles of size 230mm x 230mm x 20mm of approved quality set in Cement Mortar 1:3 (One Cement and Three Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers
Supply delivery and fixing 4' 18W Crystal Glass LED Tube Light including cost and conveyance of all materials and all other labour charges etc. complete. Electrical Data 2021-22 P.No.10 I.No.5
Supply and Fixing of Following PVC and GI Pipes and Specials of good quality including cost of materials and labour with cost for coveyence to site etc Complete complying with standard Specifications. etc.,
32mm PVC Pipe
32mm PVC Coupling
32mm PVC Elbow
32mm PVC Tee
32mm GM Gate Value
HDPE Tank 1000 Lit
Supply and fixing of MS Louer Ventilater of size 0.45 x 0.60 M size including cost and conveyance of all materials and including all labour charges etc complete
Supply and Fixing in position best quality of approved make Indian Water closet of size 580 x 440 mm with all accessories such as 'P' trap or S trap confirming to IS 2556 part XII with sand cusion and forming flooring alround the closet using 40mm levelling course 1:4:8 100mm thick and finishing the top to the required slope and including necessary internal connection and outlet connection and making the distrubed potion to original condition without leakage etc., including Labour charges for fixing etc.,
Dhayalan.V
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_535450.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .