WORK OF SUPPLY INSTALALTION AND COMMISSIOING OF SEWAGE PUMP SETS AND ALLIED WORKS COMING UNDER THE AEEDEPS1 SUBDIVSION

WORK OF SUPPLY INSTALALTION AND COMMISSIOING OF SEWAGE PUMP SETS AND ALLIED WORKS COMING UNDER THE AEEDEPS1 SUBDIVSION

Supply installation and commissioning of DG Set: 50 kW/62.5 kVA Diesel Generator set rated at 50 kW/62.5 kVA, 415 V, 0.8 pf mounted on a base frame, complete with inbuilt fuel tank and battery 1 no. 1...

Supply of 15HP in well sewage pumpset, along with suitable lifting SS chain, solid 2 handling 60mm

Erection and commissioning of pumpset in existing chamber

Mechanical arrangement for the pump delivery side with existing manifold with air 4 valve, hose pipe, sluice valve and NRV etc

supply and installation of 15HP starter panel along with motor protection, water level controller, phase reverse indication, over load relay, seal monitoring floor mounted, cable entry bottom.

Supply and installation of 100A LT panel consist of Main and DG incoming, 2 nos 15HP starter feeder, 2 nos SHP starter feeder, lighting feeder and 32A outging feeder 4 nos, floor mounted, ELR, OLR, ph...

Supply and installation of HOT crane for the wet well to lift the sewage pumpsets.7. 0.5Ton

Dismantling of cement concrete pavement by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 m3 in volume and stock piling at 8 designated locations and disposal of dismant...

Dismantling kerb stone by manual means and disposal of dismantled material with 9 all lifts and lead

Providing, laying, spreading and compacting graded stone

aggregate to wet mix macadam specification including premixing

the Material with water at OMC in mechanical mix plant carriage

of mixed Materia...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Providing and laying in position Ready Mixed or Batch Mixed concrete as per IS 10262 mix, design procedure for Cement Concrete works in all types of Structures other than Road works, using coarse aggr...

Supplying, fitting and placing TMT FE 550/550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending,hooking, laping/welding joints, tying w...

Refilling available carth around trenches/pipelines, cables in layers not exceeding 20 ems in depth, compacting each deposited layer by ramming after watering with a 14 lead upto 50 m, and lift upto 1...

Mobile Hydraulic Crane 5 t capacity 15

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to 15 2...

Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand)

finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off corne...

Providing 20 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick/stone masonry including rounding off corners wherever required smo...

Providing and applying white cement based putty of average thickness I mm, of approved brand and

manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as pers...

Providing White washing with lime to give an even shade :New work (threecoats) with lime of approved quality, including cost of materials, labour 20 complete as per specifications and as per direction...

Distempeting with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two coats) over and in cluding water thinnable priming coat with cement primer after th...

Finishing walls with textured exterior paint of required shade New work (Two coats applied 3.28 L/10 cum) over and including priming coat of exterior primer applied @ 2.20kg/10cum to give an even shad...

Providing and laying 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 ce ment: 2 coarse sand 4 graded stone aggregate 20 mm nominal...

Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade 1 Type II, in panelling fixed in aluminum doors, windo...

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/neoprene gasket etc. complete as per the architectural drawings and the directions of e...

Filling the gap in between aluminium/ stone/ wood frame and adjacent RCC/Brick/ Stone/wood/ Ceramic/ Gypsum work by providing weather/structural non sag elastomeric PU sealant over backer rod of appro...

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make conforming...

Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc complete.

Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete

Providing and fixing hand rail of approved size by welding ete, to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer....

Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel et...

Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approv...

Providing & fixing corrugated G.S. sheet roofing including vertical/curved surface fixed with polymer coated J or L. hooks, bolts and nuts 8 mm diameter with bitumen and G.1. limpet washers or with G....

Extra for circular cutting in C.G.S. sheet roofing for making opening of area 34 exceeding 40 sq. decimeter: 0.63 mm thick

Providing & fixing valleys of 90 cm wide overall in plain G.S. sheet fixed with polymer coated J, or L. hooks, bolts and nuts 8 mm dia G.1. limpet and bitumen washers complete as per design drawings. ...

75 x 150 x 75 x 6 mm C channel

Hydraulic Excavator of 0.9 m3 bucket

Providing, filling and laying of sand bags filled with sand/clay for diversion of sewage during execution of work,

Manufacturing, providing, trasporting, rolling, lowering, laying, jointing & testing and commissioning of MS specials of minimum 8mm thick such as bends, tail pieces, reduces etc. conforming to 15-732...

Providing and fixing G.1, chain link fabric fencing of required width in mo size 25x25 mm made of G.1, wire of dia 3 mm including strengthening withJE 40 2 mm dia wire or nuts, bolts and washers as re...