Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹14.4 LAccepted-AOC | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹14.8 L+₹5,298 (0.36%)Rejected-Finance | L2 | Rejected-Finance Other than lowest bidder | |
| 3 | L3₹16.8 L+₹2.1 L (14.2%)Rejected-Finance | L3 | Rejected-Finance Other than lowest bidder | |
| 4 | L4₹17.2 L+₹2.4 L (16.4%)Rejected-Finance | L4 | Rejected-Finance Other than lowest bidder | |
| 5 | L5₹19.0 L+₹4.2 L (28.7%)Rejected-Finance | L5 | Rejected-Finance Other than lowest bidder |
Tender Value
₹15.9 L
EMD Value
₹31,800
Closing Date
26 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) Jammu
Air Force Station
CA NO GE/AFJ-48/2022-23 ADDITION AND ALTERATION OF SHOPPING COMPLEX AT PCDA JAMMU UNDER GE (AF) JAMMU
2022_MES_571966_1
CA NO GE/AFJ-48/2022-23
Open Tender
Civil Works
Item Rate
270 days
Jammu
As per tender document
8 documents required · 8 mandatory
₹500
GE (AF) Jammu
₹31,800
Yes
11 May 2023
29 Dec 2022
28 Jan 2023
29 Dec 2022
26 Jan 2023
12 Jan 2023
Amount
Surface excavation n.exc. 30 cm deep and averaging 15 deep and getting out in all as specified and directed.
Excavation in trenches, not exceeding 1.5 M wide and not exceeding 1.5 M depth for foundation, etc., and getting out in soft loose Soil all as specified and directed
Hardcore of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick with soils complete all as specified and directed
Removing excavated soils not exceeding 50 M and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed
M&L for moorum/red bajri filling in floors or pavings, laid in layers not exceeding 15cm thick, spread, levelled and rammed including watering complete all as specified and directed.
Demolition of cement concrete (unreinforced) in ground floor and paving not exceeding 15 cm thickness (below or above ground level) incl the disposal upto 50M complete all as specified and directed.
M&L for 25 mm thick cement concrete type B0, 1:2:4 (using 12.5mm graded stone aggregate) as in leveling course complete all as specified and directed.
M&L for 10 mm thick rendering with CM (1:4) with using water proofing compound on fair face of wall or on concrete surfaces finished even and smooth without using extra cement mixed with water proofing compound over roof or sunken floor complete all as specified and as directed by the Engineer in charge. Note: Water proofing compound shall be measured and paid separately.
Preparation of concrete surfaces by scrubbing down with steel brushes and cleaning with water all loose dirt/dust and applying the following Roof Treatment complete all as directed :- (a) Applying first course of bituminous primer conforming to IS-3384 @ 0.4 Kg/Sqm over the screed bed. (b) Applying 2nd coarse of a coat of blown type bitumen of grade 85/25 heating to a working temperature of 180° C and applied @ 1.2 Kg/Sqm.(c) Applying 3 rd course of APP (Atactic Polypropylene) modified prefabricated five layer polymeric membrane 3mm thick weight not less than 3.6 Kg/Sqm with 160 Grams/Sqm non woven polyester made at centre core reinforced laid with 75 mm side overlap and 100 mm end overlap. (d) Applying 4 th course of a coat of bonding material with blown type bitumen of grade 85/25 heating to a working temperature of 180° C and applied @ 1.2 Kg/Sqm and blended with fine sand in dry condition @ 0.50Kg/Sqm dusted over the bitumen coat.
(e) Applying a 5th course of Solar Reflective Bituminous Aluminium Paint @ 100 grams/Sqm all as specified and as directed. The membrane shall be laid using butane torch. The membrane shall be first laid upto the parapet wall junction and then shall be overlapped with another membrane (flashing) with an overlap covering upto a distance of 300mm. In case the parapet height is less than 500mm, the membrane shall be terminated at the top of parapet. All rain water pipe openings shall be suitably sealed with APP membrane including disconnection and refixing in same position the existing Water Storage Tanks and all GI Pipes and fittings complete all as specified and directed. Notes : 1. Contractor shall be write "Name of Contractor and Date of Laying of Membrane" with paint on the wall after laying of membrane in all respect. 2. The rate includes for filling of cracks in existing roof with cement putty using suitable bonding agent (Shalocrate-42) before laying cement plaster all as directed.
Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.
M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement plaster 1:6, finished even and smooth (without using extra lime or cement) complete all as specified and directed.
M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement plaster 1:4 and mixed with WPC , finished even and smooth (without using extra lime or cement) complete all as specified and directed. (Note:- WPC shall be measured & paid seperately).
M&L 5mm thick rendering in cement mortor 1:3 on ceiling surfaces of brick or concrete surfaces finished even and smooth without extra cement complete
Demolition of Brickwork or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.
M&L for brick work with sub class 'B' bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 complete all as specified and directed.
M&L for rendering 15 mm thick on stone masonry or surface other fair face of brick work or one side of lathing in cement plaster 1:6, finished even and smooth (without using extra lime or cement) complete all as specified and directed.
Supply only water proofing compound complete all as specified and directed.
M&L for preparing new plastered surfaces and applying two coats of cement based paint over a coat of primer all as specified and directed.
Taking down steel tubing and connection 15 mm bore incl cleaning for refixing or removing from site complete all as specified and directed.
Taking down steel tubing and connection 20 mm bore incl cleaning for refixing or removing from site complete all as specified and directed.
M&L for GI tubing 15mm dia medium grade galvanised with all fittings fixed to wall and floor complete all as specified and directed.
M&L for GI tubing 20 mm dia medium grade galvanised with all fittings fixed to wall and floor complete all as specified and directed.
Refixing old steel tubing and connections in new or old positions (walls, ceiling, floor etc), bore of pipe 15 mm complete all as specified and directed.
Refixing old steel tubing and connections in new or old positions (walls, ceiling, floor etc), bore of pipe 20 mm complete all as specified and directed.
Dismantling of water tank exceeding 250 Ltrs but not exceeding 500 Ltrs complete all as specified and directed.
S&F for rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of capacity 500 litres hoisted and fixed in position all as specified in SSR Part-I, including valves high pressure with PVC float and fly nut complete screwed for iron pipe or brass ferrule and fixed with 15 mm dia complete all as specified and directed.
M&L for non skid ceramic tiles, joint free, coloured tiles 7mm to 8 mm thick (Square or rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile laid over and including 15 mm thick screed bed or bedding layer of cement mortar (1:4) complete all as specified and directed.
M&L for non skid tiles, joint free, coloured tiles 7mm to 8 mm mm thick as in skirting fixed over and including 10 mm thick cement screed in (1:3 ) CM set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles complete all as specified and directed.
M&L for glazed ceramic coloured tiles in vertical surface 450 x 300 x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match, aid over and including rendering 10 mm thick on fair faces brick work or concrete surface in cement plaster 1:3 complete all as specified and directed.
Vitreous China wash down water closet pan and seat cover (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including P or S trap and including plastic water closet seat, black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device, including connection to drain pipe (or out going pipe) and to flushing pipe, antisyphonage pipe, etc. including cast iron 'P' or 'S' trap for 100mm bore of pipe, fixed in repairs complete all as specified and as directed by Engr-in-Charge.
S&F in repair PVC flushing cistern 10 Ltrs capacity including all fitting flush pipe etc complete all as specified and directed.
S&F in reapir Vitreous china wash hand basin, white , flat back, size 580 x 450 mm with brackets, including cutting for and pinning in ends of brackets or erecting stand complete all as specified and directed.
S&F for, in repair, PVC connections 15 mm size with PTMT nuts of length 450mm long complete all and as directed by the engr-in charge.
Preparation of new plaster surfaces of wall, applying 1.5mm thick wall putty on walls and applying two coat of oil emulsion over a coat of primer complete all as specified.
Preparation old surfaces of wall including, complete removal of existing treatment , and applying 1.5mm thick wall putty on walls and applying two coat oil emulsion over a coat of primer complete all as in specified.
S&F, vitreous china bowl urinal half stall type white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed.
S and F in repair pillar taps 15 mm cast copper alloy with capstan head Chromium Plated screwed down, high pressure with or without lettered ‘HOT’ or ‘COLD’ with long screwed shanks and fly nut screwed for iron pipe and fixed complete all as specified and as directed.
S and F in repair 15mm dia bib tap cast copper alloy with crutch or butter fly handle screwed down screwed for Iron Pipe or brass ferrule and fixed.
S and F in repair angle valve cast copper alloy chromium Plated (CP) 15mm dia screwed down high pressure with crutch or butter fly handles screwed both and iron pipe or for unions and fixed
Supply and fixing in repair Shower Rose chromium plated with arm suitable for 15mm dia pipe (as per sample approved by Engineer-in-Charge.
S&F Liquid soap container of PTMT any colour fixed with and including Chromium plated brass screws and plastic cleats ( Minimum weight 105 gms)
S&F in repair 32mm dia waste coupling of PTMT,half or full threaded (minimum weight 45 gms), to WHB and kitchen sink complete all as specified and directed by Engr-in-Charge.
S&F in repair PVC (SWR) floor trap, plain with grating including jointing with solvent cement and fixed 75mm dia outlet complete all as specified and directed.
S&F in repair CP grating 125mm dia as suitable to existing trap as per requirement all as spd and directed by Engr-in-Charge
S & F concealed Stop valve cast copper alloy screwed down high pressure with CAPSTON HEAD handle chromium plated with long shank and cup (angular type) screwed both ends for iron pipe 15mm bore or for unions and fixed in repair complete all as specified and as directed.
Taking down CI pipe (any size or pattern) incl fittings such as bends, shoes, head, swan neck etc incl cleaning for refixing or removal from site complete all as specified and as directed.
PVC (SWR) pipes 110mm single socketed , in any length with rubber ring joints , laid in trenches or in floors complete all as specified and as directed.
PVC (SWR) pipes 75mm single socketed , in any length with rubber ring joints fixed to walls complete all as specified and as directed.
PVC (SWR) bends110mm complete all as specified and as directed.
PVC (SWR) bends75mm complete all as specified and as directed.
PVC (SWR) vent cowl 110mm complete all as specified and as directed.
PVC (SWR) vent cowl 75mm complete all as specified and as directed.
Roughening of old concrete surface by paking, sweeping, cleaning and washing down with water to remove dust etc complete all as specified and as directed.
M&L for machine cut kota stone slab flooring 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including mirror polishing complete mirror polishing ect over and including 20mm thick screed bed or bedding layer of cement mortar 1:4 complete all as specified and directed.
M&L for 18 to 20 mm thick colour Granite (of any type Green colour) work (table rubbed and polished) as in shop counter places, plateforms, counter type WHB and like in cement mortar 1:4 including pointing in white cement (1:2) using marble dust admixture of pigment to match with shade of granite& moulding the edges complete all as specified
Dismantling timber scantling 40 Sqcm and over in section, in any position in Framed work complete all as specified and as directed.
Supply and Fix rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates conforming to Fe-410-W complete all as specified and as directed.
Excavating soft/loose soil in post holes (or similar holes) each not exceeding 0.5 Cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm complete all as specified and directed.
S&F, steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979 Grade St- 240 complete all as specified and as directed.
M & L, for cement concrete in DPC, type B-0 1:2:4 (using 12.50 mm graded stone aggregate) complete all as specified and as directed.
Dismantling of asbestos corrugated sheets(corrugated/semicorrugated) in roof covering including ridges complete all as specified and as directed.
S&F for 2 mm fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof all as specified and directed .
S&F 0.50 mm thick pre -painted galvaltume aluminium zinc coating GI based corrugated steel sheet of an colour haviing tensile strength of 550 Mpa as in roof covering /cladding to wall,fixed with self tapping screws as specified colour as approved by Engr -in -Charge.
Dismantlin of wall and AC ceiling boards fibre pulp insulation etc or insulation boards/slabs/blankets any thickness including cover fillets, complete all as specified and directed.
S & F 12mm thick non asbestos fibre cement building boards fixed with screw on and including galvanised iron with aluminium coating snap grid frame work ( size of grid 605x605mm) with fasteners supports,plugs to walls/ceiling including two coats of oil bound distemper complete as per manufacture instruction and as directed by Engr in charge.
M&L for 75 mm thick cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate in plinth protection finished even and smooth without using extra cement complete with and including necessary form work etc complete all as specified and as directed.
M&L for PCC 1:4:8 type D2, using 40mm graded stone aggregate, as in sub base of floor with well finish and level of top surface complete all as specified and as directed
M&L for chequered cement concrete tiles 250mm x 250mmx 25mm thick, set jointed and pointed in cement slurry in floors with grey cement and pigments complete all as directed including 15mm thick screed bed in CM 1:4 complete all as specified and directed.
S&F towel rail 600mm long of PTMT any colour fixed with and including chromium plated brass screws and plastic cleats ( Minimum weight 190 gms) complete all as specified and as directed.
Sand filling under floors or in foundation including watering and consolidation complete all as specified and directed.
M&L for 60 mm thickness rubber moulded machine pressed precast concrete interlocking paver block M-35 any shape and size, confirming to IS 15658-2006 in coloured glossy finish rubber mould casted laid dry over sand cushioning complete all as specified and directed.
M&L for preparation of new steel surfaces over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of primer complete all as specified and as directed.
Taking down chowkats or frames not exc 1.5 sqm each with shutters (without taking off shutter from the frame) and removing to or from store complete all as specified and as directed.
M&L for factory made box type steel windows with side hung shutters including Box type hinges with steel handles, two Nos of tower bolts in each leaf with glazing bars complete with factory priming coat complete all as specified and as directed.
S&F 3.00mm thick sheet plain glass ordinary quality and glazing with oil putty/ wooden beads with nails in square n.exe 0.5 Sqm in each pane complete all as specified and as directed.
Supply and fixing in repair galvanised mild steel wire cloth 0.56mm nominal dia wire and average width of aperture 1.18mm and fixed with tinned tacks of galvanised wire staple to steel windows/fixed with wooden beads of 2nd class HW to wooden doors/windows complete all as specified and as directed.
S/F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat frame shall be covered with heat moulded plain color PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain color PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail : paneling of plain color PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed to gether with solvent cement, supplying & fixing in the frame at site as per specification given in SSR Part-1 clause 8B.2.1 & drawing as on page 146 all as specifed and as directed by Engineer-in-Charge.
S/F solid PVC Door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, suppling & fixing in opening as per specification and drawing & all as specifed and as directed by Engineer-in-Charge..
S&F Butt hinges 100mm size, extruded brass,with mild steel hinge pin, bright polished, type B-11all as specifed and as directed by Engineer-in-Charge..
Supply and fixing in repair aluminum anodized barrel tower bolt of extruded section 200 mm long complete all as specified (ISI Marked).
Supply and fixing in repair aluminum alloy handle 125 mm size cast type complete all as specified .
SCHEDULE 'A' PART-II (Schedule of credit) Credit amount of Rs (Refer schedule of credit) for retrieved material mentioned in Sch 'A' Part-II of Tender documents in PDF form will be deducted offline during acceptance of tender of lowest bidder.
Note: (1) The repair has to carried out as and when required basis and accordingly site will be available in piecemeal wise and as directed by Enginer-in-Charge in the PCDA(NC) Jammu.
PAKAYA BUILDERS AND DEVELOPERS PVT LTD
JK BUILDERS AND DEVELOPERS
M/S MOHAN LAL SHARMA
M/S Shesh Paul Gupta
stage.html
html • 0.05 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .