KMC/WS/ARSM/48/2025-26

SUPPLY,DELIVERY,TESTING AND COMMISSIONING OF 3 HP CAPACITY SUBMERSIBLE DEWATERING PUMP,DISCHARGE NOT LESS THAN 16 M3/HR,VOLTAGE 415+- 10%V,3 PHASE FREQUENCY 50+- 3% HZ,CABLE LENGTH 10 MTRS MINIMUM HEAD NOT LESS THAN 12 MTRS,IP:68 OF (KSB/KIRLOSKAR/MODY/WPIL/KISHORE)MAKE

Supply & delivery of the following 50 Hz, AC, Direct on Line Starter of continuous duty in sheet steel enclosure (make L&T/ABB/SCHNEIDER): 10 HPThree Phase (Max. Relay range 15-25 Amp)

SCHEDULE OF RATES FOR SUPPLYING AND FIXING(approved MATERIALS (Main Switches, Fittings, Fans)Supplying and fixing Sheet steel Main Switches on flat iron frame on wall 415V TPN with fuse on L&N 415v tpn 30/32 A Standard

5.3A2 SUPPLYING OF FOLLOWING XLPE INSULATED ALUMINIUM CONDUCTOR ARMORED CABLES OF 1.1 KV GRADE AS PER IS 7098 (PART 1) 1988 WITH UPTO DATE AMENDMENTS,(RATES IN RS PER MTR),GOVT OF WEST BENGAL,UNIFIED SCHEDULES OF RATES (M&E) IRRIGATION & WATERWAYS DEPARTMENT 2022 4 CORE10 SQ MM

PLUMBING WORKS (A)-(II) G.I. PIPE WORKS AND FITTINGS 2. Supplying, fitting and fixing in position G.I. pipes of TATA make for underground works with all necessary accessories,specials viz.socket, bend, tee, union, cross, elbow, nipple, short piece etc.including cost of all materials,jointing materials ,cutting pipes,making threads,cutting trenches upto 1.5 metre below surface in all sorts of soil and refilling the same as directed with two coats of painting on G.I. pipes and specials with bituminous paint complete in all respect. (Payment will be made on the centre line measurement of the total pipe line including all specials No separate payment will be made for accessories, specials.Payment for painting will be made seperately) (viii) 80 mm dia. medium quality

(C) III: Labour Rate for Sanitary and Plumbing 1.Plumbing Mistry NOTE:The above rates are exclusive of 10 % profit and 1% Labour welfare cess, which would be admissible to the Contractor, but contractual percentage will not be applicable on the above rates.

(C) III: Labour Rate for Sanitary and Plumbing 2.Mazdoor NOTE:The above rates are exclusive of 10 % profit and 1% Labour welfare cess, which would be admissible to the Contractor, but contractual percentage will not be applicable on the above rates. Page 113 of 124

SCHEDULE OF RATES FOR OVERHEAD LINE INSTALLATION - REPAIR 16. Supplying and Fixing GI water proof looping cable box having hinged GI Top Cover having 4 mm thick with rubber gasket lining, railway type mechanical locking arrangement, earthing terminal with lug etc. of the following sizes as indicated below, Comprising of one 250 V, 15 A Kit-Kat fuse unit, one NL on porcelain insulator etc. and housing the same in pole muffing incl. addition and alteration to the existing CC muffing (6:3:1) after dismantling the damaged looping cable box etc. where necy. incl. painting (b) 250 x 250 x 100mm

A N N E X U R E - I Basic Rate of Materials: (All Rates of materials from K-1 to K-14 are excluding VAT) 127. 80mm GI pipe (ISI-Medium)

Supplying and fixing 240/415 V MCB Isolator on din rail of existing DBs and necessary connection. Schneider 40 A DP

BUILDING WORKS (B) DISMANTLING, CUTTING CHASE, HOLES ETC. 1. Dismantling all types of masonry excepting cement concrete plain or reinforced, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m. (a) In ground floor including roof.

BUILDING WORKS ( C ) Brickworks,Concrete Works etc B. CONCRETE WORKS 4. Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes. a) Pakur Variety

BUILDING WORKS ( C ) Brickworks,Concrete Works etc B. CONCRETE WORKS 3. Making one set of scaffolding only for replacing glass panels, painting, uprooting plant and another repairing works of building and S&P works for external works only with 10 cm. dia bamboo as main posts at the rate of 1 metre centre to centre and 7.5 cm. dia bamboo ties @ 0.75 metre apart fitting and fixing with necessary coir, nails etc. as per direction of the Engineer-incharge. (This item should be executed only after prior approval of the Engineer-incharge). Firstly, one number to be paid and then labour rate for shifting up to further nineteenth (19) times @ 10% each time to be considered. If necessary further after twenty times of total use, another one number new and labour rate for shifting to be considered accordingly b) Extra for additional 3.6 height or part thereof

PLUMBING WORKS (A)-(II) G.I. PIPE WORKS AND FITTINGS 5. Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only). (ii) 80 mm dia

Sub Total

Please Enable Macros to View BoQ information