Repair and maintenance of damaged motor, panel board and supply fixing of other electrical accessories at Malaisuthi Road MCC Center in Tiruchengode Municipality.

Supply and laying of PVC INSULATED AND SHEATHED 3 CORE FLAT TYPE COPPER CABLE 2.5sqmm CONFORMING TO IS 694/1990 AND AS AMENDED THEREAFTER WITH ISI MARK CONFORMING TO IS etc complete.,

Supply and fixing of 120W LED Street Light Fitting with LED Charges for including all labour charges etc complete., SOR 2025-26

Supply and fixing of 30W LED Street Light Fitting with LED Charges for including all labour charges etc complete., SOR 2025-26

Supply and fixing of 25W LED Street Light Fitting with LED Charges for including all labour charges etc complete., SOR 2025-26

Supply and fixing of 30W LED Bulb Charges for including all labour charges etc complete.,

Supply and run of 4 x 6 sq.mm. (84 / 0.3) PVC insulated single core unsheathed copper conductor of 1100V on 7 / 20 GI bearer wire for service connection mains (SD 68)

Wiring with 2x1.5sqmm(22/0.3) PVC insulated unsheathed SC. Cu.Conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with TW switch box with 5A F.T. switch inflush with wall, covered with hylum sheet of 3mm thick with painting of suitable colour for open PVC light / fan point (SD 22)

Wiring with 2 x 1.5 sq.mm (22 / 0.3) PVC insulated single core unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150 x 100 x 113mm TW switch box for 5A 3 pin non inter locking Wall socket with 5A flush type switch with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open PVC plug point (SD 36)

Supply and fixing of 63 Amps Porcelain Fuse Unit (500V) Charges for including all labour charges etc complete.,

Supplying, fabricating, erecting structural steel work for roofing welded or bolted type using MS channels, angles, plates and round bars etc. conforming to IS specification including primer coating and enamal painting as per Design given by the departmental officers etc, complete as per standard specification

Painting two coats with Ready Mixed Enamel Paint over the new iron works of approved quality and colour without priming coat including the cost all materials etc.,complete, in all floors.

Fabricating supplying and fixing of pre painted galvanized iron sheets with the following specification. The materials should be of PPGI tile profile with a red colour or any other approved design 0.47 mm thick 24 guage having width 1050 mm. The sheet should be G.I.base pre painted hot dipped galvanized iron sheet and to be fixed with shelf tapping screws,plastic washer.The washer and screws to be fixed by using minute power machine drilled with out damaging the sheets paint coating to be regular modified polyster coat with zinc coating of Z 120 GSM paint thickness the finish should be terra cotta finish like malabar mangalore tiles finish optional matt finish. The sheet to be fixed with making suitable corrugated,cutting the sheet in to the required ssize and making ornamental designs as per the site condition and as directed by the departmental officers.

Supply and delivery of 5HP direct online starter confirming to IS13947, IEC60947-1 and as amended thereafter with suitable KW rating for operation in AC/Three Phase/50HZ (± 5%) and 415 V(±10%) including Ammeter, Voltmeter, Thermal Overload relay, 16 Amps 2 pole Magnetic Contactor with under Voltage protection, Indication lamp, starting capacitor, running capacitor and On/Off Push button switches, 5 way connector, wiring with 1 sq. mm/1.5 sq. mm copper PVC insulated cable, powder coated vermin proof box including the capacitor (the cost of capacitor is to be taken separately).

Supply and delivery of 75*175 lpm*m clear water vertical wet type submersible pumpset suitable for 150mm dia borewell conforming to IS 8034/2002 as amended thereafter and BEE 3 Star Rated capable of discharging noted LPM against head of water column due to all causes. The pump shall be with stainless steel shaft and dynamically balanced bronze or Cast SS impeller, brass screws and CI FG 200 grade pump bowl/diffuser with ISI mark. The pump shall be directly coupled to a continous rated two pole suitable wet type vertical squirrel cage induction motor as per IS9283 /1995 as amended there after, suitable for operation in AC three phase 415 V+/ 10 %, 50 HZ +/- 5 %

Supply and delivery of following G.I.Pipe, PVC Pipe, and UPVC/CPVC Pipes & specials including cost and conveyance etc., complete as per standard specifications.

32mm PVC Pipe ( 10 kg.per cm²)

40mm dia GI Pipe

32mm PVC Elbow

Laying of GI rigid pipes / PVC , UPVC Pipes following and specials to trench and laying to proper grade and alignment jointing with GI couplers with cement paste and testing to the required pressure including all labour charges etc.,TWAD 2025-26

Upto 40mm dia PVC /UPVC Pipe

40mm dia GI Pipe

add GST 18%

Please Enable Macros to View BoQ information