REPAIRS TO FLOORING PLASTERING JOINERY PLUMBING AND CERTAIN BR WORKS IN GOLF VIEW AND POST OFFICE ROAD UNDER AGE BRII OF GE MAINT INF SCHOOL MHOW

Amount

Taking down chowkhats or frames with shutter (without taking off shutters from the frame) area not exceeding 1.5 sqm each complete all as specified .

Taking down chowkhats or frames with shutter (without taking off shutters from the frame) area exceeding 1.5 but not exceeding 4.0 sqm each complete all as specified .

Taking down shutters of any description not exceeding 1 sqm each and removing from site complete all as specified

Taking down shutters of any description exceeding 1 sqm but not exceeding 2 sqm each complete all as specified

S&F second class hard wood plain, solid straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified

M&L for resecuring or easing and adjusting without taking off shutter of any description not exceeding 1.0 sqm each

M&L for resecuring or easing and adjusting without taking off shutter of any description exceeding 1.0 sqm but not exceeding 2.0 sqm each

S&F 30 mm thick flush shutter solid core construction with block board core and plywood face panels, commercial type on both sides complete all as specified

S&F second class hard wood plain, framed pannelled shutters 35mm thick factory made (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per (IS : 1003 complete all as specified .

S&F Second class hard wood factory made glazed and skeleton window / ventilator shutter 30mm thick open repeated and prepared to receive glass,gauze etc (with sash bars) edges of framing plain, chamfered or rounded ,fitted with cut and mitered beads for securing glass etc size of member of shutter as per specified in SSR part-I section 8,clause 8.24 (b) and for window and fixed with chowkats, chemically pressure treated complete all as specified

S&F second class hard wood glazed and skeleton (doors) shutters 35mm thick , open rebated and prepared to receive glass, gauge etc, (with sash bars) edges of framing plain, chamfered or rounded , fitted with cut and mitred beads for securing glass etc, size of members of shutter as specified in SSR Part I, Section 8, clause 8.2 (a) Supplied and fitted to chowkats complete all as specified

S&F factory made solid PVC door frame of size 50mm x 47mm made out of plain 5mm plain colour PVC sheet reinforced with MS square tube, with wooden grain printed PVC sheet used inserted of plain colour PVC sheet & edges will be painted to match with printed sheet complete all as specified

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified and as directed.

S & F pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate,etc., size of frame 125mm x 60 mm complete all as specified .

M&L for preparation of new wood and wood based surfaces of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer.

M&L for preparation of newly steel surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete.

S&F galvanised mild steel wire cloth of 0.56 mm dia wire and average width of aperture 1.18mm & fixed with tacks or galvanised steel wire staples,etc complete all as specified

S&F in repairs galvanised mild steel wire cloth of 0.56mm dia wire and average width of aperture 1.18mm & fixed with tacks or galvanised steel wire staples,etc complete all as specified .

Hacking out old broken glass ( any thickness size ,quality or description ) from wooden frame or stone etc and S&F 3.00 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beading in square not exceeding 0.50 sqm in each panes complete all as specified

S&F 100 mm size butt hinges medium weight cold rolled mild steel and fixed

S&F 75 mm size butt hinges medium weight cold rolled mild steel and fixed

S&F 50 mm size butt hinges medium weight cold rolled mild steel and fixed

S&F 150 mm long Aluminum anodized barrel tower bolts of extructed section

S&F Mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed, length of bolt 150 mm

S&F Mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed, length of bolt 125 mm .

S&F Mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed, length of bolt 100 mm

S&F Aluminum alloy handle fabricated anodised of size 150 mm long

S&F Mild steel pressed handle of size 150mm oval type, stove enamelled black

S&F Mild steel pressed handle of size 100mm oval type, stove enamelled black

S&F Mild steel pressed handle of size 75mm oval type, stove enamelled black

S&F Mild steel ordinary rat tail rod pattern springs including roller and roller plate of size 300mm complete all as specified

S&F second class hard wood small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like including all necessary labours articles not exceeding 200 Cu Cm each

S & F in repairs mild steel framed work as in doors or gates of angle iron, door frame or other section with gusset plate, rails, braces etc complete, drilled for fixing of steel sheeting or other covering etc, to prepared for hanging or sliding with including either hooks and hinges also fastening grills, grating, hold fast of doors and windows chowkat etc, with ends of bars shouldered and or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walkways; railings; framework of water tanks and fixing and similar work confirming to fe 290 Gde E-165 complete all as specified and as directed.

S& F mild steel framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165,etc complete all as specified

Supply,fabricate and fix coloured powder coated aluminium frame work for door,windows,ventilators with one or more rebates sections of approved tint as required for portions including beading,cleat, screws,fasteners, plugs, for fixing with wall/ceiling columns/beams etc complete all as specified and directed.

S&F aluminium coloured powder coated window and ventilator shutters, sliding type without sash bar aluminium section weighing 0.55 kg/m including necessary locking arrangement, guide wheels, joining cleats, glazing clips rubber packing anodised aluminium snap beading screws etc complete all as specified and directed.

S&F in repair aluminium coloured powder coated door shutters, aluminium section weighing 0.55 Kg/m including necesssary joining cleats, glazing clips, rubber neoprene packing handles 2 Nos in each door, pad lock, hinges, anodised aluminium snap beading screws etc complete all as specified and directed. .

S&F 4.8 mm thick plain or tinted glass not exceeding 0.5 Sqm in each pan ordinary quality including rubber gasket for packing and fixed to aluminium doors /window / partition including necessary cutting / moulding and chamferrring of edges for service window/counters complete all as specified

S&F in repair aluminium (extructed section) Door closer hydraulically regulated, desingnatin No. 3, universal type, suitable for door shutter and fixed

S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed

S&F in repair 150 mm long floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring and rubber piece in floor, etc complete all as specified

S&F in repair 25 mm dia mild steel chromium plated drappery curtain rod with fixing bracket complete all as specified

S&F in repairs18mm thick factory made 100% solid rigid PVC (Poly Vinyl Chloride) foam sheet Prelam colour having density of 600kg/cbm manufactured by an Iso 9001-2015 certified company.Termite proof,water proof and flame retardant PVC sheet,manufactured by single layer extrusion process for one side prelaminated solid PVC foam sheet. PVC film laminate should be pasted on PVC sheet with suitable adhesive and approved shade.

S&F in repairs stainless steel self closing hinge of 75 mm size for PVC door shutter

S&F in repairs 100 mm size MS mat / glossy finish handle

S&F in repairs 50 X 15 mm size magnetic door catcher for closing of PVC door shutter

S&F in repairs mild steel drawer cabinet channel for moving the drawer etc complete as specified

S&F in repair modular type stainless steel basket of size 0.50 m x 0.53 m x 0.10 m (dia of wire not less than 3.0mm) of any shape with side sliding roller clip and sliding rails on both side fixed with steel screws including all fixing arranement complete as specified and dirceted.

Taking down cement plaster on brick wall /stone wall, ceilings, etc, racking out joints, hacking for key and scrubbing with water completely complete as specified

M&L 10mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement.

M&L for rendering 15 mm thick in CM ( 1:4 ) mixed with water proofing compound on wall/ concrete surfaces finished even and smooth without using extra cement comlete all as specified Note: (a) Supply only WPC shall be measured and paid separetly under relevant item (b) Plastering work to wall and ceiling shall be carried out upto 12m height . Contractor shall quote his rate accordingly and quoted rate shall be inclusive of necessary scaffolding as required at site

Supply only Liquid water proofing compound complete all as spesified and directed.

M&L for 5 mm thick plastering in CM 1:3 on ceiling surface finished even and smooth without using extra cement

M&L for preparation of old decorated surface and washing, scrubbing down on ceiling and applying two coats of white wash all as specified.

M&L for applying two coats of first quality oil emulsion distemper over a coat of primer over cement base white wall care putty on new prepared surface of wall complete all as specified Note:- Putty shall be measured and paid seperately under relevant item

M L for preparation of new plastered surfaces of walls and applying two coat of Acrylic Smooth exterior paint of required shade (@ 1.67 ltr/10 sqm) over a coat of primer (@ 2.20 kg/10 sqm) of same make base all as specified and directed. Make : Asian- Apex or Equivalent.

M&L for complete removal of existing treatment of surfaces of walls including brooming , scraping down,smoke spot, moss, efflorescent salts, trading oil, greasey spots and stopping nails marks and applying two coats of first quality oil emulsion distemper white/coloured over a coat of primer of same make over a coat of cement base white wall care based putty (if required at site in patches) all as specified Note:- Putty shall be measured and paid seperately under relevant item

M&L for applying one coat of 2mm thick wall care putty on walls all as specified

M&L for complete removal of existing treatment of wall and applying two coats of exterior weather proof water base emulsion paint white/coloured over a coat of oil base base primer over a coat of white cement based putty (if required at site in patches ) all as specified and directed. Note: Putty shall be measured and paid seperately under relevant item

M&L for preparation of old decorated surfaces of wall including brooming , scraping down ,smoke spot, moss, efflorescent salts, trading oil, greasy spots and stopping nails marks and applying one coat of exterior weather proof water base emulsion paint white/coloured over a coat of oil base base primer over a coat of white cement based putty (if required at site in patches ) all as specified and directed. Note: Putty shall be measured and paid seperately under relevant item

Demolition of brick work built in cement mortar of any description including all quions arches, pillars, etc complete all as specified

M&L for brickwork with sub class 'B' modular bricks, straight or curved on plan exceeding 6 m mean radius, built in CM 1:6 complete all as specified

Demolition of cement concrete in ground floor and paving not exceeding 15cm thick ( below or above ground level ) complete including removal of debries out side MD land all as specified

M&L for PCC (1:2:4) type B2 using 40 mm graded aggregate ,100mm thick as in sub base, levelling course, etc complete all as specified

M&L for forming construction joint 30mm deep x 10mm wide filled with sealing compound, Grade ‘A " completed all as specified

M&L for PCC1:4:8 type D2 using 40mm graded stone aggregate as in sub base of floor etc complete all as specified

M&L for 75mm thick cement concrete 1:3:6 type C1 using 20mm graded stone aggregate as in plinth protection finished the surface even and smooth with using extra cement including filling the expansion joints with bitumen filler / filler boards and necessary form work etc complete all as specified

Dismantling of floor, hearth , or wall tiling including cement mortar bedding ( but not backing ) and rubbish off the primeses complete all as specified

M&L for non skid ceramic coloured tiles 7-8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exc 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match with colour of tile over and including 15mm thick screed bed or bedding layer in CM 1: 6 complete all as specified

M&L for non skid ceramic coloured tiles 7-8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match with colour of tile over and including 15mm thick screed bed in CM 1: 6 complete all as specified

M&L for scratch free vitrified ceramic tiles 8-10mm thick (square or rectangular) area of each tile not exceeding 0.36 sqm ,in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match with colour of tile over and including 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified

M&L for glazed ceramic coloured tiles of size 350mmx250mmx7mm / 450 mm x 300 mm x7 mm thick on vertical surfaces such as wall, dado ,skirting etc set and jointed in neat cement slurry and pointed with coloured cement to match colour of tile over and including 10 mm thick backing coat in CM (1:4) complete all as specified

Demolition of Stone slabs and tiles of any description or thickness in floors laid bedded and pointed in any mortar complete all as specified

M&L for chequered cement concrete tiles with grey cement and pigment of size 40cmX40cmX40mm / 30cmX30cmX30mmthick ,set and jointed and pointed in neat cement slurry in floor etc over and including 15mm thick screed bed in CM 1:6 complete all as specified

M&L for machine cut kota stone slab in flooring 20-25mm thick of size not less than 595x595 mm as in floor and laid over and including 15mm thick screed bed in CM 1:6 & set jointed and pointed cement mixed with pigment to match the shade of slab including rubbing and polishing complete all as specified

M&L for rounding to edges of stone slab slab one edge such as in steps,cooking platform,and other similar situation complete all as specified

M&L for 60mm thick machine pressed rubber moulded precast concrete interlocking paver block (glossy finish) of M-35 Gde of approved shape, size and colour conferming to IS 15658-2006 and including joints filled with sand complete all as specified and as directed. Note:Sand cushioning shall be measured and paid separately under relevant item.

M & L Sand filling under floors as a cushioning to paver block complete all as specified Note: Thickness shall be measured after punning

Taking up or down 15mm dia steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and as directed.

All as per item no 79 above but 20mm bore complete all as specified and directed.

S&F 15mm bore steel tubing medium grade galvanized with all fitting such as bend ,elbow, socket,tees,and fixed complete to wall or in ceiling or in floors including cutting threading and making forged bends on pipes MS hooks etc ,complete all as specified

All as per item no 81 above but 20mm bore complete all as specified

S&F in repair 15mm bore bib taps chromium plated with crutch or butterfly handle ,screwed down , screwed for iron pipes or brass ferrule complete all as specified

S&F in repair CP pillar taps (swan neck type) cast copper alloy CP with capstan head, screwed down ,high pressure with long screwed shanks and fly nuts fixed in 15 mm bore pipes complete all as specified Make-Plumber/Essco of jaguar(Economical Range)

S&F in repair CP angle stop cock of 15mm bore screwed down for high pressure with crutch or butter fly handle ,screwed both end for iron pipes complete all as specified .Make-Plumber/Essco of jaguar(Economical Range)

S&F in repair fancy type chromium plated 15mm bore two way Bib cock cast copper alloy with crutch or butterfly handle, screwed for iron pipe or brass ferrule etc complete all as specified Make-Plumber/Essco of jaguar(Economical Range)

S&F in repairs concealed stop valves fancy type chromium plated with long shanks and cup fixed with 15 mm dia bore pipes complete all as specified

S&F in repair 125 mm size chromium plated shower rose with siwel joint and arm not less than 20cm long suitable for 15 mm bore GI pipes comlete all as directed..Make-Plumber/Essco of jaguar (Economical Range)

S& F in repair CP toilet paper holder complete all as specified

S&F in repair vitreous china wash down water closet pedestal pattern white excluding flushing cistern and flush pipes complete all as specified

S&F in repair vitreous china squatting pan `Orissa ' pattern of size 580x440mm white with integral foot rest (excluding flushing cistern and flush pipes) including connection to trap and to flush pipe etc and lime concrete bedding including 'P' or 'S' trap complete all as specified

S&F in repairs PVC valve less,syphonic action type flushing cistern,low level ,white with inlet ball valve,float and handle including brackets and connection to pipe and fixing of chain and pull or lever if any complete all as specified .Make :Plumber/Essco of jaguar(Economical Range)

S&F in repair health faucet with flexible pipe of one metre length including wall hook for EWC complete all as specified .Make :-Plumber/Essco of jaguar(Economical Range)

S&F in repair vitreous china wash hand basin white flat back, size 550x400 mm including bracket but excluding taps ,waste pipes , chain and plug etc complete all as specified

S&F in repairs vitreous china wash basin white (oval shaped under counter) of size 550 x 400mm including 32mm brass CP waste coupling complete all as specified

S&F in repairs PVC connection 15mm size with PTMT nuts of length 450 mm long

S&F in repairs of brass CP tubular towel rail 20 mm dia 60cm long between flange with brackets etc as in repair complete all as specified and directed.

S&F in repairs CP grating 100mm dia including fixing with white cement with trap etc complete.

S & F in repairs PVC (SWR) floor trap plain or multi with stainless steel grating incl joining to waste pipe with solvent cement joint dia of outlet 75mm bore complete all as specified

M&L for grinding and polishing the existing kota stone flooring complete all as specified and as directed

Demolition of cement concrete (unreinforced) on roofs, floors (other than ground floors), beams, staircases, landing,chajjas and similar suspended work

M&L PCC 1:5:10 type E2 using 40mm graded stone aggregate as in mass concrete at sunken portion filling etc complete all as specified

M&L for 15 mm thick rendering in CM 1:3 mixed with WPC @ 3% on fair faces of brick work or concrete surface finished even & smooth with using extra cement at sunken portion complete all as specified Note : WPC shall be measured and paid under relevant item

M&L for applying a coat of bitumen VG-10 @ 1.20 kg/sqm over a coat of bitumen primer 0.70 kg/sqm conform to IS-3384:1986,16532,16540:2017 for water proofing treatment etc complete all as specified.

M&L APP modified pre-fabricated five layer water proofing membrane 3 mm thick not less than 3.60 kg/sqm including sealing at pipe joints and reinforced with polyster non wove fabric (weight not less than 350gms / Sqm) laid on primed surface by torced application complete cleaning the surface of foreign matter by wire brushing roughing surface to receive plastered and scrubbing down with water at sunken portion and dispose the debris exceeding 250m distance including dismantling of earthing strips and refixing the same after roof treatment complete all as per manufacturer instructions complete all as specifed and directed.

Supply only integral water proofing compound

S&F 20mm dia GI pipe medium grade as in spout pipe of length 45 cm.

S&F PVC (SWR) 'P’ trap suitable for 110mm bore of pipe complete all as specifed

S&F in repairs PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specifed

S&F in repairs PVC (SWR) bends 110mm dia any radious

S&F in repairs PVC (SWR) pipes 75 mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specifed

S&F in repairs PVC (SWR) bends 75mm dia any radious

S&F in repair CP wall mixer for mixing hot & cold water screwed down for iron pipe 15mm bore complete all as specified

S&F in repair wash basin mixutre, centre hole, mixing hot & cold water, fancy type, cast copper alloy, chromimum plated with capstan head, chromium plated, screwed down high pressure, screwed for iron pipe of 15mm dia complete all as specfied

S&F in repairs PVC waste pipe for wash basin/ sink pipe 32/40mm bore of required length at site complete all as specified

S & F in repair waste coupling of PTMT (half or full threaded) bore dia of discharge pipe 32/40 mm, etc complete all as specifed (Minimum weight 32mm- 45gms/40mm-60 gms)

S&F in repair butt hinges of size 75mm medium weight cold rolled mild steel and fixed

S&F in repair butt hinges of size 100mm medium weight cold rolled mild steel and fixed

S&F in repair mild steel sliding door bolts,plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed, length of bolt in 300 mm complete

S&F in repairs stainless steel hinges for modular kitchen cabinet all as specified

S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long

S&F in repair corner glass shelf (with bracket) all as specified

S&F in repair door seal including fittings as required

S&F in repairs 15mm wall mixture with provision for bath telephone shower and overhead shower all as specified . Make. Prayag , Jaquar

Dismantling timber framed fillets rails, post, rafters purlins, etc under 40Sqcm in section complete all as specified

S&F second class hard wood plain fillets , square rectangular or triangular in section ,clean sawn secured with nails or brads exceeding 13sqcm but not exceeding 25 sqcm complete all as specified

S&F in repairs veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on both faces; fixed with screws to timber frame work 12mm fixed with screws to timber frame work

S&F in repairs 30 mm wide contineous piano hinges mild steel ,bright finish or electro-galvanised complete all as specified

S&F in repair 300 mm ordinary rat tail rod pattern door spring MS including roller & plate

S&F 100 mm hasp & staple safety type of aluminium anodised including bolt to hinges plate and fixed with screws complete all as specified

S&F in repairs Plastic water closet seat cover in white colour, closed pattern with flat bottom, and mild steel chromium plated for aluminised hinging device complete.

S&F stainless steel plate rack for kitchen 1 mm thick of best quality with suitable hanging arrangement and fixed to wall complete all as specified and as directed by Engineer-in-Charge.Note:- Size of plate rack shall be not less than 900x1200 mm and weight of rack shall not be less than 8.5 Kg each.

S.S. Engineers

M/S GARG CONSTRUCTION

ram prashad chotelal batham

Sudarshan Associates

M/S UnitedConstruction