8164/20-21/E8SPECIAL REPAIR TO BLDG NO. T-241, T-191 OF 270 TRANSIT CAMP, COOK HOUSE IN BLDG NO. P-286 ALONGWITH MODULAR KITCHEN AT 3 INF DIV PRO UNIT AND SIG REGT AND PROVN OF DUNNAGE FOR STORAGE OF RATION FOR COMP PL 503 ASC BN AT KARU UNDER GE 860

Amount

Demolition of concrete (Un-reinforced) including tiles/kota slab etc. in ground floor and paving etc n.exc 15 cm Thick below or above GL

M&L for cement concrete 75mm thick type D-2 (1:4:8) using 40mm graded stone aggregate as in sub base to receive floor finish etc complete all as spd and directed.

M&L for Machine cut kota stone slab flooring 20-25mm thick over and including cement screed bed 20 mm th in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete

M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed 20mm thick in CM 1:4 and jointed with ditto as per item 03 above complete all as spd & directed.

M&L for Granite (of any type) tiles 20mm thick machine cut, bedded over and including 20 mm thick screed bed in CM1:6 and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including griding and polishing complete all as spd & directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.

M&L for Glazed colured ceramic tiles of size 300x200x7mm laid on vertical surface such as dado/skirting over 10mm cement mortar in CM 1:4 backing coat, set jointed in neat cement slurry and pointed in white or coloured cement complete all as specified and as directed (cement mortar backing coat shall be measuered and paid separately).

M&L for Non-skid Ceramic tiles (colour or white as directed) 7 to 8mm thick (Square/rectangular) area of each tile exc 0.11Sqm but n. exc. 0.18sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match in CM 1:6 screed bed or bedding layer mortar 15mm thick for laying floor finishes complete all as apecified and directed by Engr-in-Charge.

S & F non skid ceramic coloured tiles 7 to 8mm thick (square or rectangular) area of each tiles exceeding 0.06sqm but not exceeding 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or colour cement to match, over 15mm thick screed bed in CM (1:6) complete all as specified and directed.

Demolition of Brickwork or stone/ boulder masonry, built in lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M & L Precast cement concrete block masonry type C1 1:3:6 (20mm graded aggregate) with solid blocks, exc. 10cm in width and, setting in cement mortar 1:6 complete all as Specified.

Taking down cement plaster on brick or stone walls etc.including racking out joints,hacking for key scrubing down with water&receive plaster upto double story height complete all as specified and as directed.

M&L rendering in cement mortar 1:4, 15mm thick on fair face on concrete surface complete all as spd & directed.

M&L for preparation new surfaces of plastered or unplastered old decorated surfaces of walls by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying two coats of white wash, complete all as specified.

Dismantling of rolling shutter structural steel work including doors, gates, including steel frame complete all as spd & directed.

Taking up or down steel tubing and connections including cleaning for refixing with all fittings for 15 mm bore GI tubing.

Taking up or down steel tubing and connections including cleaning for refixing with all fittings for 20 mm bore GI tubing.

S&F medium grade galvanised steel tubing with all fittings fixed to wall or laid in floors for 15 mm bore GI tubing.

S&F medium grade galvanised steel tubing with all fittings fixed to wall or laid in floors for 20 mm bore GI tubing.

S&F in repair of 15mm bore bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-90gms/20mm-125gms) complete all as specified and directed by Engr-in-Charge.

S&F 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed botjh ends for iron pipe and fixed and completed

S&F in repair of 2000 ltrs capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including taking down exiting un-serviceable one complete all as specified and directed by Engr-in-Charge.

S&F in repair for Stainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets, connecting union overall size 915mmx460mm with bowl size 410mm x 330mm x 160mm, including taking down old un-serviceable one, complete all as spd & directed.

Dismantling of cast iron SWR pipes from any position of 75mm dia.

All as per item No 24 above but 100mm dia.

S&F PVC (SWR) pipes 75mm dia, single socketed in any length with rubber ring joints fixed to walls.

All as per item No 26 herein before but 100 mm dia.

Dismantling of boarding in wall/ceiling, any description, fixed in any position with nails or screws complete all as specified and directed by Engr-in-Charge. (Note:The quoted rates are included for removing of electric fittings/ appliances and other accessories from old surfaces and refixing the same in old or new position in new surfaces)

M&L for 9mm thick Pre-laminated particle board, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws/nails to timber frame work in wall portion all as specified and directed by Engr-in-Charge.

Dismantling of timber scantling in fillets, posts, rafters, purlins etc under 40Sq. Cm in section complete in unframed work.

M&L for 2nd class hard wood timber scantling plain fillets square, rectangular in section area exc 13 Sqcm and not exc 25sqcm secured with nails complete.

M&L for decorative type soft wood beading 30mm wide fixed on plywood complete all as specified and as directed by Engr-in-Charge.

S&F for 125mm Aluminium handles, cast type, anodised complete all as spd & directed.

S&F for 30mm continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as spd & directed.

S&F for 75mm Hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screwes complete all as spd & directed.

S&F 4mm thick glass sheet ordinary quality and glazing with oil putty fixed with wodden beads n.exc 0.5Sqm in each pane including hacking out old broken glases of any size complete. .

S&F 5mm thick glass sheet ordinary quality and glazing with oil putty fixed with wodden beads n.exc 0.5Sqm in each pane including hacking out old broken glases of any size complete. .

S & F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

M&L for preparation old surfaces of plastered or unplastered old decorated surfaces of walls by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying two coat of white/lime wash on walls including cornices, pilasters etc complete all as specified and directed.

Ditto all as per item No. 39 here in above but on ceiling surfaces.

M&L for preparation old surfaces of plastered or unplastered old decorated surfaces of walls by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of oil bound distemper on walls including cornices, pilasters etc complete all as specified and directed.

Ditto all as per item No. 41 here in above but on ceiling surfaces.

M&L for preparation of new painted surfaces of wood or wood based material and applying two coat of synthetic enamel paint on surface of any description over 10cm width or girth complete all as specified and directed.

M&L for preparation of old painted steel surfaces and applying one coat of synthetic enamel paint on surface of any description over 10cm width or girth complete all as specified and directed.

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed by Engr-in-Charge. (Note : The quoted rates are included the cost for making of holes/outlets for ventilation/escape of smoke/chimney etc incl necessary arrangements in the roof sheet and removing of the existing fittings/fixture/electric wiring etc carefully without any damage which is necessary for dismantling of sheetings and refixing the same in serviceable condition in the same or new position after repairing/replacing of the sheeting complete in all respect).

S&F 0.63mm plain, black, mild steel, sheeting in stepped flashing Imeasured as the minimum rectangle from which the pieces can be out)

S&F for Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, rallings, framework of watertanks and similar work conforming to Fe.290. Gde-E-165 complete all as spd and directed.

Taking down chowkhats or frame exc 1.50 sqm each but n exc 4 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed.

Taking down chowkhats or frame n.exc 1.50 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed.

S&F 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered , put together with glue, pinned at joints complete all as specified and directed.

S&F for 2nd class hard wood 30mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters of windows, ventilators, etc. are provided with stiles and rails as specified in SSR Part I, Section 8 clause 8.24(b) supplied and fitted to chowkats

S&F for 2nd class hard wood 35mm thick Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of 12 mm thick veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats

S&F Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life) complete all as specified and as directed by Engr-in-Charge.

M&L 35mm thick flush shutter,solid core construction,with block boand core and ply wood face panel,commercial type on both sides Factory made soild PVC profiled panel door shutter 28mm thick with integral skin as frame & 3mm thick high pressure compact laminate on both side of approved colour as infill, with 'C type Gl or 40 x 20 x19 of MS pipe as stiffner & supplying & fixing in frame at site as per specifications & drawing complete all as specified and as directed.

S&F 100 mm size butt hinges, medium weight , cold rolled, mild steel and fixed complete all as specified and directed

S&F 150 mm long Aluminium anodised tower bolt, with cast or sheet barrel and rolled of cast bolt and fixed all as specified and directed.

S&F 150 mm size Aluminium anodised handle, cast type, and fixed complete all as specified and directed.

S&F 250 mm long Aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extrudedsections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed.

S&F 140mm Floor door Stopper of aluminium alloy boby and tongue with hard drawn steel spring, fixed in floor

S&F in repair 75 mm size butt hinges, medium weight , cold rolled, mild steel and fixed complete all as specified and directed

S&F in repairs Vitreous China water closet squatting pan, 'Orrisa' pattern, size 580 x440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete including connectoin to trap, and to flushing pipe, anti syphonage pipe etc. including trap set in and including concrete and making good to floor.

S&F in repair PVC 10 Ltrs valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete with flush pipe etc. ISI approved complete all specified and directed.

S&F in repair stop valves 15mm bore cast copper alloy, screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed complete all as specified and as directed.

S&F PVC connection 15mm size with PTMT nuts of length 450 fixed complete all as specified and directed.

M&L 6mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one face; fixed with Nails to timber frame work complete all as specified and directed by Engr-in-Charge

Dismantling of wrought iron or mild steel work of any description complete all as specified and directed by Engr-in-Charge Note : The quoted rates are included or make good of nearby area of dismentaling of wrought iron.

S&F of Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded duly one factory coat red oxide primer complete all as specified and directed by Engr-in-Charge

M&L preparation of new steel surfaces of any description, over 10cm in width or girth, priming with a coat of red oxide primer and applying two coat of synthetic enamel paint complete all as specified and directed by Engr-in-Charge

M&L for second class hard wood in scantling for timber framed and fixed for clean sawn complete all as specified and directed.

S&F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.

Mild steel wood screws, bright finished, with slotted countersunk head, designation 4 to 10 (2.74 to 4.88mm nominal shank dia) n. exc. 50mm long complete all as specified and directed.

M&L for painting for new wooden surfaces of any description, not otherwise described, over 10cm width or girth on with pink primer and two coats or synthetic enamel (ordinary tint) complete all as specified and directed.

Taking down carefully steel window / ventilators of size n. exc 1.5 sqm each complete all as specified and directed by Engr-in-Charge.

S&F Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified and directe by the Engr-in-Charge.

S&F Pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified all directed by the Engr-in-Charge.

Supply & Fixing 20mm dia metal powder coated curtain rod including wooden finish curtain fancy type brackets fixed to walls & curtain rings 8 Nos per RM (Minimum) etc complete all as specified and directed by Engr-in-charge.

Taking down old unserviceable copper/aluminium point wiring (light, fan, socket , power socket and bulk head fittings) on surface wiring on wooden batten/casings & caping complete, including fixture and fittings such as switches, ceiling roses,pendents holder, regulators and sockets by unscrewing carefully from boards etc and making good disturbed surfaces of walls, as per existing finishes complete all as spd and directed.

.M & L for point wiring for one light/one fan/one buzzer controlled by one switch with 1.5 sqmm single core PVC insulated unsheathed multistranded copper conductor FRLS cable with and including PVC concealed conduit heavy duty 20 mm dia having thickness not less than 1.8 mm with all fittings including anodise pressed steel sunken box having thickness not less than 2mm with 3mm bakelite laminated sheet ISI marked for switches and sockets , including 1.5 sqmm single core PVC insulated unsheathed multistranded copper conductor FRLS cable as earth continuity conductor connected to comman earth dolly, including cutting chiseling for concealed piping and making good disturbed surface to match with the existing surface complete all as specified and directed.Note: (a) Insulation test of point wiring (b) colour coding is to be maintained .(Ph-Red, N-Black, Half -Yellow, Earth- Green) (c) On RCC roof ceiling PVC conduit shall be provided on surface for fan with proper fixing clips all as directed.

All as per item No 78 but One socket outlet 3 pin, 5 Amps on independent board, controlled by one no 5 Amp switch.

All as per item No 78 but One socket outlet 3 pin 5 amps on the same board controlled by one no 5 Amp switch.

All as per item No 78 but with 2.5 sq mm FRLS copper wire with 2.5 Sqmm FRLS copper earth wire for indpendent 15 Amp point.

S&F, in repalcement, of Switch piano type, single pole, one way, 5 amps, 230 volts, complete all as specified and directed.

S&F, in repalcement, of Socket, two-in-one, 5 pin, 5 Amp, universal type, 230 volts, complete all as specified and directed.

S&F, in repalcement, of Switch piano type, single pole, one way, 15 amps, 230 volts, complete all as specified and directed.

S&F, in repalcement, of Socket, 6 pin, 5/15 Amp, multipurpose shutter type, 230 volts, complete all as specified and directed.

S&F, in replacement, of Lamp holder, metal cased, bakelite body, 230 volts, complete all as specified and directed.

S&F LED lamp 15W complete all as specified and directed by the Engineer-in-Charge.

S&F, in repalcement, of Ceiling rose, two to three terminals, bakelite body, 230 volts, complete all as specified and directed.

Supply and fixing in replacement 20W 6000K LED batten and making connection to ceiling rose by 23/0.0076 copper flexible wire all as specified and directed at site.

S&F in replacement bulk head fittings of Environmental friendly, ultra modern, energy saving, surface mounted, decorative oval plastic bulk head fitting 14W LED 6000K luminaire comprising of high brightness LEDs, IP54 protection.

S&F in replacement of DB, double Door, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, SPN 8 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof, suitable for incorporation of MCB’s and isolators etc and making all necessary connections, duly flush of wall surface, complete all as specified and directed.

S&F in replacement of DB, double Door, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, SPN 4 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof, suitable for incorporation of MCB’s and isolators etc and making all necessary connections, duly flush of wall surface, complete all as specified and directed.

S&F in replacement of MCB, C Curve type, 10 kA, 40 to 63 Amp, SPN with over load and short circuit protection, complete all as directed.

S&F in replacement of MCB, C Curve type, 10 kA, 6 to 32 Amp, Single Pole with over load and short circuit protection, complete all as directed.

Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 metres below normal ground level, connecting to the Galvanized iron earth wire 4.0 mm dia by means of bolts, nuts , check nuts and washers of galvanized iron and steel earth wire protected by provision of GI light grade pipe 15 mm bore including provision of concrete pit made from PCC ( 1:2:4) type B-1 (using 20 mm graded stone aggregate) with 40mm thick cover of RCC 1:2:4 reinforced with XPM (Weight not less than 4 Kg/Sqm) and frame of angle iron 40 x 40 x 6 mm and handle of 6 mm dia MS bar made to shape, GI light grade 20 mm bore pipe for watering perforated at bottom, 1.50 metre long placed on top edge of earth plate, common salt & charcoal filling, with fixing arrangement , funnel, wire mesh and earth work in hard/dense soil , returning filling in and removal of surplus soil to a distance not exceeding 50 metres, all as per electrical plate No 5 of SSR 1991 Part-I and connecting to CBDB’s as specified or indicated including testing on completion .

Supply and laying XLPE insulated armoured heavy duty electric cable with aluminium conductor (Stranded) 1100V grade cross-sectional area 10Sqmm 2core laid in trenches or passing through pipe or fixed on pole/wall/equipment etc including jointing and testing complete all as specified and directed by Engr-in-Charge.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5 m depth for laying of cable/ stay assy/LT poles and getting out in hard/dense soil complete all as specified and directed.

Returning filling incl spreading watering and well ramming in layers not exceeding 25cm in hard and dense soil complete all as specified and directed.

Removing excavated material not exceeding 50 mtrs and depositing where directed at a level n. exc 1.5mtr above the starting point complete all as specified and directed.

Material and labour for un-reinforced pre-cast concrete cable covers, class LV type-1, flat size 250mm x 150mm x 40mm thick complete all as specified.

Sand cushioning to underground cable complete all as specified in clause 19.75 of SSR Part - I.

M/S LIBE & CO

M/S SONAM RIGZIN

M/S MUNEER HASSAN AKHON

H R CONSTRUCTION

M/S GEE AAR and SONS ENTERPRISES

osho traders

M/S MA CONSTRUCTION Co