Loading
Loading…
Loading…
Tender Value
₹6.7 Cr
EMD Value
₹13.3 L
Closing Date
1 Jun 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
SNT SIG
14 conditions · 3 needing a document upload
IR GCC 2022 ACS 1 CLAUSE 10.2 Financial Eligibility Criteria: The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where: V= Advertised value of the tender in Crores of Rupees, N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The Tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
IR GCC 2022 ACS 1 CLAUSE 10.1 - 1. Technical Eligibility Criteria: (As Per IR GCC Clause 10.1) (a)The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii) One similar work costing not less than the amount equal to 60% of advertised value of the tender. (b) (1) In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or (iii) One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note for b(1): Separate completed works of minimum required values shall also be considered for fulfillment of technical eligibility criteria for different components. Note - Works Completion certificate of Similar work along with copy of LOA as per IR GCC 2022 may be submitted (If MEC Applicable), this shall be on bidder's name. NOTE - SUBSTANTIALLY COMPLETED WORKS IS DEFINED IN TENDER DOCUMENT ATTACHED HEREWITH vide Para 10.5 of GCC April 2022 with latest applicable ACS.Similar nature of the work:- Any work of EI / PI / RRI / ABS/ IBH/ LC Gate interlocking work which include indoor and outdoor signalling work.
Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organisation, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate.
14 conditions · 2 needing a document upload
The local content requirement for this work is minimum 50% for Make in India compliance. The offer submitted by the firm against this tender shall be in compliance of Order No. P- 45021/2/2017-PP (BE-II)-Part(4)Vol.II dated 19.07.2024 of Department of Promotion of Industry and Internal Trade, Minstry of Commerce and Industry attached with this tender as PDF. Non-compliance of this Make in India order in the offer submitted by the firm shall lead to summarily rejection of the offer. The tenderer shall enter local content percentage under Sl. No. 2 of Commercial-Compliance with their offer.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
The said suppliers of goods and/or services would be subject to GST Act and rules as applicable from time to time. Tenderers are requested to submit their offers as per GST Tax regime. All the bidders/tenderers should ensure that they are GST compliant and their quoted tax structure/rates are as per GST Law.
In case of sole proprietorship Firm: A copy of notarized affidavit on Stamp Paper declaring that his Concern is a proprietary Concern and he is sole proprietor of the Concern OR HUF: A copy of notarized affidavit on Stamp Paper declaring that he who is submitting the tender on behalf of HUF is in the position of 'Karta' of Hindu Undivided Family (HUF) and he has the authority, power and consent given by other members to act on behalf of HUF. OR for Partnership Firms: (i) A notarized copy of the Partnership Deed or a copy of the Partnership deed registered with the Registrar. (ii) A notarized or registered copy of Power of Attorney in favour of the individual to tender for the work, sign the agreement etc. and create liability against the firm. OR For Company registered under the Company's Act: (i) The copies of MOA (Memorandum of Association) / AOA (Articles of Association) of the company. (ii) A copy of Certificate of Incorporation. (iii) A copy of Authorization /Power of Attorney issued by the Company (backed by the resolution of Board of Directors) in favour of the individual to sign the tender on behalf of the company and create liability against the company. OR For Registered Society and Registered Trust: (i) A copy of Certificate of Registration. (ii) A copy of Memorandum of Association of Society/Trust Deed. (iii) A copy of Power of Attorney in favour of the individual to sign the tender documents and create liability against the Society/Trust. (iv) A copy of Rules & Regulations of the Society. OR For Limited Liability Partnership (LLP) Firms: (i) A copy of LLP Agreement. (ii) A copy of Certificate of Incorporation. (iii) A copy of Power of Attorney /Authorization issued by the LLP in favour of the individual to sign the tender on behalf of the LLP and create liability against the LLP. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the Standard General Conditions of Contract. In Absence of these documents, offer of the firm will be summarily rejected. For more clarification regarding this, pls refer GCC April 2022 with latest ACS available on railway official website.
I/We agree to carry out all works with use of modern equipments of required capacity for the work without extra payment. The decision of railway engineer shall be final and binding in this regard.
It is the responsibility of contractor to arrange the payment of the labour employed for the work through bank and to deduct PF as per the provisions of Minimum Wages Act.
The quantities shown above are approximate and to give a general guideline. Railway reserves a right to increase, decrease or to delete any of the items mentioned in schedule.
Special Conditions of Contract for Mandatory Updating of Labor Data or Railway's Shramikkalyan Portal by Contractor as per Railway Board's letter No2018/CE-I /CT/4 dated 17.10.2018: In order to increase in payment of contract labour wages and other payments aweb-based e- application has been developed and hosted on website www.shramikkalyan.indianrailways.gov.in All contractors are required to upload details of their LOAs, engaged workmen, wage payment details,|PF/ESI details, bonus details etc., on monthly basis. The details so uploaded shall be available in public domain.. In order to ensure the compliance and fulfillment of these instructions, following action is required to be completed by contractors: A) Contractor is to abide by the provisions of Payment of Wages Act and Minimum wages Act in terms of Clause 54 and 55 or Indian Railways General Conditions of Contract. In order to ensure the same, an application has been developed and hosted on website www.shramikkalyan.indianrailways.gov.in . Contractor shall register his firm/company etc. and upload requisite details of labor and their payment in this portal. These details shall be available in public domain. The Registration/updating of Portal shall be done as under:-a )contractor shall apply for one time registration of his company/firm etc. in the Shramikkalyan portal with requisite details subsequent to issue of Letter of Acceptance Engineer shall approve the contractor's registration on the portal within 7 days of receipt of such request. b)Contractor once approved by any Engineer, can create password with login 1D (PAN No.) for subsequent use of portal for all LoAs issued in his favor. c)The contractor once registered on the portal, shall provide details of his letter of Acceptance (LOA)/Contract Agreements on Shramikkalyan portal within 15 days of issue of any LoA for approval of concerned Engineer. Engineer shall update (if required) and approve the details of LoA filled by contractor within 7 days of receipt of such requested) After approval of LoA by Engineer, contractor shall fill the salient details of contract labours engaged in the contract and ensure updating of each wage payment to them on Shramikkalyan portal on monthly basis. e)lt shall be mandatory upon the contractor to ensure correct and prompt uploading of all salient details of engaged contractual labour and payments made thereof after each wage period. B)While processing payment of any On Account bill or Final bill or release of Advances or Performance Guarantee/Security Deposit, Contractor shall submit a certificate to the Engineer or Engineer's representatives that I have uploaded the correct details of contract labours engaged in connection with this contract and payments made to them during the wage period in Railway's Shramikkalyan portal atwww.shramikkalyan.indianralways.gov.in till..Month... Year......
GCC April 2022 with latest ACS has been introduced and published/available on railways website. The provisions of GCC 2022 or latest amendments released till the time of date of publishing of tender will be applicable on this tender. Tenderers are requested to download the same from the railways website and ensure the implementation of the latest provisions made in GCC while execution of work.
Bhopal division: SHRN-phase-I yard remodelling in connection with provision of turnout for utilization of platform no 3 and 4 lines by MKC direction trains.
BPLNWKS2026-27SIG03
BPLNWKS2026-27SIG03
Open
Works - General
12 Months
Bhopal, Madhya Pradesh
₹0
₹13.3 L
1 Jun 2026
2 May 2026
18 May 2026
198 items across 6 schedules · ₹6,65,51,876.79 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | Supply and installation of Permetric earth (Maintenance Free Earth) arrangement as per RDSO Spec. No. RDSO /SPN /197 /2016 Version 1.0 or latest. This a l s o includes supply o f all required materials along with Maintenance free earthing item as per latest RDSO Guideline for commissioning of Permetric earth covering the entire building. Earthing shall comply all guidelines specified i n R D S O T A N No. STS/E/TAN/3006 dated 02.11.2012 or latest. (Unit - Per Cabin). (Material inspected by RDSO) | Set | 1.00 | 1,96,304.98 | 1,96,304.98 |
| 2 | Supply and installation of class A type Early stream eremission lighting conductor (ESELC),fully autonomous having lower seriesof energy collecting electrodes, upper series of spark generating electrodes,as inbuilt micro controller for detection of lighting down ward leader and releasing upward leader at that very precise moment to ensure nuisance free, fail safe, real need based operation any and every time,sealed in a stainless - steel housing fixed at the center of its central rod which has full electrical connectivity direct up to earth point, gain in triggring time of 25 micro second or better giving 75 meter radius or higher, high protection, real life &high voltage laboratory tested, CPRI tested. OEM guranantee and test certificate to be submitted at the time of supply.(Material inspected by Consignee) | Numbers | 1.00 | 56,228.48 | 56,228.48 |
| 3 | Supply of Mast (50 mm dia, GI) and support hardware (cantilevered/guyed type, as required at site)suitable for mounting the E S E L C Lightning Arrester equipment abovethe roof/any surface, length as required at site as per standard practice. All accessories like clamps,bracket, guy kit, cable ties, base plate, adapters, nut bolts etc. shallbe supplied by the Contractor. (Material inspected by Consignee) | Numbers | 1.00 | 7,890.26 | 7,890.26 |
| 4 | Supply of copper cable of size 70 sqmm insulated copper cable (black colour) for high lightning current, as a down conductor. The tensile strength shall be between 220 - 270N/ sqmm. The copper cable shall be designed to take care of 200 KA discharge current. OEM guranantee and test certificate to be submitted at the time of supply.(Material inspected by Consignee) | Numbers | 1.00 | 539.85 | 539.85 |
| 5 | Supply of testable 6 digit LCD non- ressetable type lightning stroke counter. OEM guranantee and test certificate to be submitted at the time of supply. (Material inspected by Consignee) | Numbers | 1.00 | 9,385.25 | 9,385.25 |
| 6 | Supply of Data Logger with 1536 Digital inputs and 48 Analog inputs as per RDSO spec No.IRS:S:99 /2006 (Amend-3) or latest.The datalogger should be compatible to network with existing COA system available at station and also to be able to integrate in the existing data logger network and FEP/Servers available at Testroom.(Material inspected by RDSO) | Numbers | 1.00 | 6,42,510 | 6,42,510 |
| 7 | Supply of data concentrator along with one Dual Card E1 modem as per RDSO specification IRS:S- 99/2006 (Amdt-3) compatible with Data logger installed in this work.(Material inspected by Consignee) | Numbers | 1.00 | 1,43,405 | 1,43,405 |
| 8 | Supply of dual RS 232 E1 to serial converter card compatible with data logger installed in this work.(Material inspected by Consignee) | Pair | 1.00 | 32,060.08 | 32,060.08 |
| 9 | Supply of Protocol converter for interfacing the data logger and the EI system suitable for data logger installed in this work. Any other equipment/Connector/Cable required to connect EI to datalogger wil have to be supplied by Contractor at his own cost. (Material inspected by Consignee) | Numbers | 1.00 | 37,767.66 | 37,767.66 |
| 10 | Supply of powder coated Main Cable Termination rack complete with scaffolding, fixtures & accessories including square bars for mounting 8-way terminal / WAGO - make terminal blocks, ladders, string rods, frame, base assembly, insulators, J bolt, nut/bolts & fasteners (Bakelite strips) etc. Siemens' type & as per extant practice on W. C. Rly. Typical part list as per Annexure-I and rack arrangement shall be as per sketch SK-727. Rack should be made of first class steel powder coated painting and rack manufacturer's certificate should be submitted. All runway for cables / wires shall be provied with PVC sleeve of proper size. (Material inspected by Consignee) | Numbers | 3.00 | 31,059.1 | 93,177.3 |
| 11 | Supply of QNA1 (AC immunised relay), 12F- 4B and 8F-8B, 24V DC along with plug board (Base plate), retaining clips and connectors conforming to BRS:931A ; IRS S 34 ; IRS S 23 ;IRS S 60-78 , STR: SIQ 0420 Ver.1. (Material inspected by RDSO) | Numbers | 80.00 | 7,156.12 | 5,72,489.6 |
| 12 | Supply of QN1 Non AC Immunised Relay, Style QN1,24 V DC, 8F-8B/12F-4B Contact, along with plug board (Base plate), retaining clips and connectors conforming to BRS:930, IRSS 34, IRS S 23. Break up of configuration will be given by railway before supply.(Material inspected by RDSO) | Numbers | 50.00 | 4,828.2 | 2,41,410 |
| 13 | Supply of QBAT Track Relay (AC immunised relay), 9 Ohm, 2F/2B,along with plug board (Base plate),retaining clips and connectors as per RDSO/SPN/84 Ver 2.0.(Material inspected by RDSO) | Numbers | 5.00 | 6,600.56 | 33,002.8 |
| 14 | Supply of Track Relay QTA2 (AC immunised relay), 9 Ohm, 2F/1B along with plug board (Base plate),retaining clips and connectors conforming to BRS:939A & 966 Appendix F2, IRS:S-34 & IRS:S-23.(Material inspected by RDSO) | Numbers | 25.00 | 5,830.6 | 1,45,765 |
| 15 | Supply of relay universal LED ECR, QECX61 4F/4B 110V AC along with plug board (Base plate), retaining clips and connectors conforming to BRS: 941A, IRS:S34 &IRS:S23.(Material inspected by RDSO) | Numbers | 50.00 | 5,419.84 | 2,70,992 |
| 16 | Supply of Relay AC Immunized, DC Biased Contactor Relay, Style QBCA1, 2HF-4B contact 24 V DC, Metal to Carbon Complete with Plug Board,Retaining Clips and Connectors, Conforming to BRS:943, IRS S 34, IRS S 23,IRS S 60-78.(Material inspected by RDSO) | Numbers | 20.00 | 6,808.85 | 1,36,177 |
| 17 | Supply of Relay plug in type style QL1 with configuration of 11F/4B contacts magnetically latched neutral line relay, 24 VDC, Metal to Carbon Contacts complete with plug board, retaining clip & Connectors conforming to BRS: 935A, IRS:S-34 & IRS: S-23 or latest.(Material inspected by RDSO) | Numbers | 8.00 | 9,377.05 | 75,016.4 |
| 18 | Supply of Relay, Miniature, Plug in Type, M to C, DC Neutral ,Line Relay QSPA1, 24V DC,Slow to Pick up AC Immunized,8F-4B Contact, front and back contacts metal to carbon complete with plug board, retaining clips & connectors conforming to BRS:933A, IRS S34, IRS S 23, IRS S 60-78 as applicable.(Material inspected by RDSO) | Numbers | 30.00 | 3,399.8 | 1,01,994 |
| 19 | Supply of QNNA1 DC Neutral,Line relay ACI 24 V DC, 6F-2B/4F-4B , twin relays alongwith plug board (Base plate),retaining clips and connectors confirming to BRS:960, IRS S34, IRS S 23, IRS S 60- 78.Break up of configuration will be given by railway before supply. (Material inspected by RDSO) | Numbers | 10.00 | 4,510.59 | 45,105.9 |
| 20 | Supply of Key Lock Relay AC immunized with different ward combinations (Five set of same ward plate for Point Machine to be supplied with each relay) of Siemens Make working on 24V DC or functional equivalent.(Material inspected by RDSO) | Numbers | 4.00 | 15,282.46 | 61,129.84 |
| 21 | Supply of Limit switch New Top Roller type with 2 NO + 2 NC contacts Model No. 102TPRA. (Material inspected by Consignee) | Numbers | 1.00 | 687.06 | 687.06 |
| 22 | Supply of universal earth leakage detector for 8 channel for monitoring 110 V AC, 24 V DC, 60V DC & 110 V DC as per RDSO spec. N o . RDSO/SPN/256/2025 Version: 2.0 with latest amendment. (Material inspected by RDSO) | Set | 2.00 | 1,53,194.49 | 3,06,388.98 |
| 23 | Supply of flexible cable single core multistrand copper conductors, 1x10sq. mm confirming to RDSO specification IRS:S:76/89 with latest amendments. (Material inspected by RDSO) | Kilometre | 0.10 | 1,36,486.96 | 13,648.7 |
| 24 | Supply of flexible cable single core multistrand copper conductors, 1x16sq. mm confirming to RDSO specification IRS:S:76/89 with latest amendments. (Material inspected by RDSO) | Kilometre | 0.10 | 2,01,848.41 | 20,184.84 |
| 25 | Supply of VF tapping transformer as per IRS/TC/22/76 of impedance ratio 600:470. (Material inspected by Consignee) | Numbers | 8.00 | 1,325.25 | 10,602 |
| 26 | Supply, Fabrication & screen printing of SWR/Laminated board/System information board/ failure information board on white formica of 1200x600x3mm as per instruction of site engineer. Proportionate payment will be made if size of board get increased or decreased. (Material inspected by Consignee) | Numbers | 1.00 | 7,622.51 | 7,622.51 |
| 27 | Supply of Shunt Signal Post with Base (GI Pipe of 80 mm Dia., Medium class, IS Specification IS:1239 Pt-1/1990).(Material inspected by Consignee) | Numbers | 5.00 | 4,235.11 | 21,175.55 |
| 28 | Supply of retro reflective Signal No. plates as per Signal engineering manual Drg No- 19-D10. (Material inspected by Consignee) | Numbers | 20.00 | 768.36 | 15,367.2 |
| 29 | Supply of A/AG/C/P/G board as per RDSO Drg. No. SA 23455-56 RST- 52 11445 & SA 23476-77 as applicable and as per SEM latest drawing No. 19-D10 (sheet 1-10) as applicable. (Material inspected by Consignee) | Numbers | 6.00 | 638.81 | 3,832.86 |
| 30 | Supply of Pad locks Godrej/ Hand Cuff Locks with common key.(Material inspected by Consignee) | Numbers | 30.00 | 400.85 | 12,025.5 |
| 31 | Supply of Non Metallic (FRP) colour light signal housing multi unit type for railway signaling suitable for RE area TWO Aspects. Complete without lenses,lamps and signal transformer as per RDSO DRG. No. SA 23001/A/M Adv. Alt- S and as per SPEC. No. RDSO/SPN/194/2006 (Ver. 2.0) or latest and FRP material as per RDSO Spec. No. RDSO /SPN /151/1997 or latest.(Material inspected by Consignee) | Numbers | 5.00 | 38,856.52 | 1,94,282.6 |
| 32 | Supply of Non Metallic (FRP) colour light signal housing multi unit type for railway signaling suitable for RE area THREE Aspects. Complete without lenses, lamps and signal transformer as per RDSO DRG. No. SA 23001/A/M (Adv.) and as per SPEC. No. RDSO/SPN/194/2006 Rev. 2.0 or latest and FRP material as per RDSO Spec. No. RDSO /SPN/151/1997 or latest.(Material inspected by Consignee) | Numbers | 5.00 | 37,645.96 | 1,88,229.8 |
| 33 | Supply of Offset bracket 5 1/2" suitable for 140mm outer dia for main signal.(Material inspected by Consignee) | Numbers | 7.00 | 1,451.29 | 10,159.03 |
| 34 | Supply of Offset Bracket 3 1/2" for shunt signal.(Material inspected by Consignee) | Numbers | 2.00 | 783.62 | 1,567.24 |
| 35 | Supply of position light shunt signal Unit. as per RDSO No. SA23840. (Material inspected by Consignee) | Numbers | 7.00 | 12,209.2 | 85,464.4 |
| 36 | Supply of 1 Way Junction Type Route Indicators as per RDSO No. SA23401. (Material inspected by Consignee) | Numbers | 5.00 | 24,647.79 | 1,23,238.95 |
| 37 | Supply of 2 Way Junction Type Route Indicators as per RDSO Nos. SA23401-6 as per IRS:S-66/84 amndt-1 or latest. (Material inspected by Consignee) | Numbers | 1.00 | 28,435.07 | 28,435.07 |
| 38 | Supply of 3 Way Junction Route Indicator as per RDSO No. IRS S-66/84 amd.1 or latest SA-23403 suitable for LED signal.(Material inspected by Consignee) | Numbers | 1.00 | 24,823.96 | 24,823.96 |
| 39 | Supply of Calling-on Unit as per RDSO Drg Nos 24351 (Adv.) Alt1.(Material inspected by Consignee) | Numbers | 4.00 | 3,143.88 | 12,575.52 |
| 40 | Supply of S shape GI bend pipe Medium class, 50 mm dia. and of 1 mtr length for cable entry in point machines as per Drg. No. Dy CSTE/C /BPL /011.(Material inspected by Consignee) | Numbers | 6.00 | 511.31 | 3,067.86 |
| 41 | Supply of Apparatus Case with miniature 'E' type locks with keys (1 key per 5 location boxes) of ward Nos. 11 (E type lock & key as per spec. Nos IRS S 30 & RDSO Drg.Nos. SA 3376/M & 3377/M respectively with latest Amendment) on both the doors, duly painted with red oxide. Single case as per Drg No. WS- 8842/A with latest alteration. (Material inspected by RITES) | Numbers | 25.00 | 23,344.82 | 5,83,620.5 |
| 42 | Supply of Phenolic Laminated sheet, resin bonded 10mm thick, grade P3 in standard size of 1.22X1.22 Mtr as per Spec. No. IS 2036 of 1974.(Material inspected by Consignee) | Numbers | 27.00 | 4,322.54 | 1,16,708.58 |
| 43 | Supply of lamp holders, switches, two pin (Backellite type) and bulbs (230V/110V) for location boxes (Anchor make or ISI mark). (Material inspected by Consignee) | Numbers | 25.00 | 154.32 | 3,858 |
| 44 | Supply of two in two out (4 conductor) Knife edge disconnect terminal block set as per RDSO/SPN/189/2004 version 3.0 with latest amendment. (Material inspected by RDSO) | Numbers | 8100.00 | 99.09 | 8,02,629 |
| 45 | Supply of end plate suitable for disconnect terminal.(Material inspected by Consignee) | Numbers | 810.00 | 13.65 | 11,056.5 |
| 46 | Supply of end stop suitable for disconnect terminal block. (Material inspected by Consignee) | Numbers | 1620.00 | 11.95 | 19,359 |
| 47 | Supply of steel carrier Din rail suitable for fixing disconnect terminal 1 meter long of dimension 35mm X 7.5 mm, 1mm thickness, unslotted. (Material inspected by Consignee) | Metre | 114.00 | 163.5 | 18,639 |
| 48 | Supply of cartridge fuse block made of PBT as per RDSO Drg. No. SA - 23748 Alt. 4 and Spec. No. IRS-75/2006 with latest ammendment. Fuse block shall be suitable for round head type fuses.(Material inspected by RDSO) | Numbers | 60.00 | 225.71 | 13,542.6 |
| 49 | Supply of non detoriating type low voltage cartridge fuse current 4Amp/6Amp in equal proportion round head type as per spec No IRS/S/78/92 with latest amendment. (Material inspected by RDSO) | Numbers | 60.00 | 55.29 | 3,317.4 |
| 50 | Supply of earth electrode assembly as per Drg. No. CR/SK-753.(Material inspected by Consignee) | Numbers | 40.00 | 1,515.43 | 60,617.2 |
| 51 | Supply of fire extinguisher having Composite/SS/Aluminum Cylinder of same fire rating as per latest BIS: 15683:2018 and as per specific service pressure requirement for use. Fire Extenguisher CO2 type 4.5kg. (Material inspected by Consignee) | Numbers | 12.00 | 8,524.89 | 1,02,298.68 |
| 52 | Supply of Pre-wired Crank Handle cum key lock relay box along with LEDs, TEKNIC/SIEMENS or similar make push buttons, 8-way terminal strips/wago terminal, string rod etc. (Material inspected by Consignee) | Numbers | 1.00 | 11,403.3 | 11,403.3 |
| 53 | Supply of Fuse auto changeover for used in Railway signalling system as per RDSO/SPN/209/2012 VER 2 with latest amendment one automatic changeover unit 32 nos. of external Non Deterioting Type or G type fuses from 0.6Amp to 4 Amp . (Material inspected by RDSO) | Set | 20.00 | 40,394.31 | 8,07,886.2 |
| 54 | Supply of Fuse auto changeover for used in Railway signalling system as per RDSO/SPN/209/2012 VER 2 with latest amendment one automatic changeover unit 24 nos. of ex (Material inspected by Consignee)ternal Non Deterioting Type or G type fuses from 10Amp to 16Amp .(Material inspected by RDSO) | Set | 2.00 | 66,618.82 | 1,33,237.64 |
| 55 | Supply of low maintenance Lead Acid Secondary Cells 2V/ 80 Amp Hr. as per spec. No. IRS 88/93 with latest amendments. (Material inspected by RDSO) | Numbers | 120.00 | 2,484.5 | 2,98,140 |
| 56 | Supply of Track feed battery chargers of 10A rating to Specn.Nos. IRS: S.89/93 with latest amendment. Charger shall be suitable for charging 80 AH battery. (Material inspected by RDSO) | Numbers | 30.00 | 4,085 | 1,22,550 |
| 57 | Supply of track lead junction boxes as per Drg. Nos. RST11509 made from fiber glass along with terminal blocks. The TLJB should be BLACK in colour. (Material inspected by Consignee) | Numbers | 90.00 | 1,861.1 | 1,67,499 |
| 58 | Supply of B type choke to specn. No.IRS.S.65/83 with latest amendments. (Material inspected by RDSO) | Numbers | 30.00 | 4,539.52 | 1,36,185.6 |
| 59 | Supply of adjustable Track Feed Resistance, 30 ohms as per RDSO Drg. Nos. SA-20161-66M/M with latest amendments (with Phenolic moulded base). (Material inspected by RDSO) | Numbers | 30.00 | 1,606.18 | 48,185.4 |
| 60 | Supply of Hydrometer, Exide make or similar for measuring specific gravity of Battery Graded acid with mounting stand in location Boxes. (Material inspected by Consignee) | Numbers | 10.00 | 385.05 | 3,850.5 |
| 61 | Supply of LED type Indication cum operating panel to be made of size of 54 mm x34mm cover plates depicting the yard layout, unit signal,track etc. of minimum size(12x8) siemens type Dominos complete wired with full components. The panel should have polycarbonate sheet cover on top to avoid damage while in service Each of the working domino should have all 15 terminals components with wiring. Total No. of Domino (12 x 8) = 96 Nos.Size 54 mm x 34 mm. The length approximately 730 mmx 450 mm. The height is approximately 910mm (rearside) and 820 mm (frontside). The panel should have poly carbonated sheet cover on the top. SPARE: 10% of working domino with cover plate completely wired and 10% of LEDs of each colour,10% (minimum three) of buttons, 10% of counter, 2 magnets, 1 buzzer & 4 b u l b extractors shall be handed over as spare after commissioning of the installation by the contractor. (Material inspected by Consignee) | Numbers | 1.00 | 30,291.48 | 30,291.48 |
| 62 | Supply of Block section limit board as per RDSO Drg No. SA 2375 (Adv) and retro reflective arrangement as per Drg No. BPL/S&T/M/45. (Material inspected by Consignee) | Numbers | 2.00 | 2,221.43 | 4,442.86 |
| 63 | Supply of Goods warning Board/shunting limit board as per Drg No. Dy CSTE/C/BPL/003. It also includes supplyof M S Channel, Nut & Bolt etc as per drg. (Material inspected by Consignee) | Numbers | 2.00 | 3,366.82 | 6,733.64 |
| 64 | Supply of as made document after completion of work. (Material inspected by Consignee) Unit=Cabin | Numbers | 4.00 | 1,00,000 | 4,00,000 |
| 65 | Supply of Various types of EI cards connectors EI relay rack and any other material required for commissioning of the station in phase one (Annexure-II). (Material inspected by RDSO) | Lot | 1.00 | 2,65,80,234 | 2,65,80,234 |
| Schedule total | ₹3,44,72,017.11 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
GCCApril2022.pdf
ATTACHMENT
GCCAPRIL2022ACS1toACS112.pdf
ATTACHMENT
AnnexureVI-B.pdf
ATTACHMENT
MII_Revision_Order_19July2024.pdf
ATTACHMENT
MakeinIndiacompliancedeclaration.pdf make in India
ATTACHMENT
tenderbookletSHRN_merged.pdf
ATTACHMENT
MakeinIndiacompliancedeclaration.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .