Repairing and renovation of boundary illumination arrangement and allied works at P.H.No.-I, Zone-I under Sindrani W/S Scheme under EMSD-I, P.H.E.Dte. Dist. 24PGS(N).

Amount

Dismantling the existing defective fixture after disconnection of all electrical connection by deploying skilled personnel & kept at site all complete as per direction of E.I.C.

Erection of existing pole in new position with sole plate etc as per direction of EIC above & below G.L. including C.C. foundation from the bottom of sole plate up to 0.75 mtr. Depth and making C.C. foundation in portion 6:3:1 above ground level neatly cemented finish (3mm thick ) including making provision of cable entry in the junction box of the pole including excavation and refilling of earth pit with shifted soil and ramming properly after damaging the existing.

Supply delivery at site of 100 Watt LED Street light luminaire with pressure die cast aluminium housing ,heat resistant toughened glass with frame offering (IP-66) protection. (Make-Philips(Type-BVP 175 LED 110 CW 100W FG GR PSU )/CGL/Similar type of approved make)

Fitting fixing the fixtures as in item no. 3 in existing pole including making interconnection from pole box to fixture with 2.5 Sq.mm copper wire by supply fitting fixing of necessary fixing materials as per direction E.I.C.

Supply fitting fixing of 16A DP MCB with box.

Supply delivery at site of 1.1 KV grade 6 Sq.mm 2core Al.Ar. Cable (Make-Gloster/Mescab/Polycab/Havells/any other approved make) Cable should be supplied as per site requirement.

Laying of above supplied cable as in item no. 6 in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed.

Laying of above cable as in item no. 6 on wall/surface incl. S & fitting fixing of required nos. of MS saddles with earthing attachment , making holes etc. as necy. Mending good damages and painting all complete as per direction.

Finishing the end of cable as in item no. 6 by crimping method incl. supplying and fixing solderless socket , tapes, anticorrosive paste & jointing materials all complete as per direction.

Earthing the pole with ¾” inch dia x 6’ ft. long G.I. Earth spike along with 1 x 6 SWG G.I. wire, bolts, nuts and washers of suitable size driven up to a depth of 6.25’ ft. below G.L and restoring the surface duly rammed as per I.E. Rules and direction.

Testing commissioning the whole installation upto entire satisfaction of E.I.C.

Making suitable size pump foundation base & valve support with supplying cement, sand, stonechips etc. in the portion of (4:2:1) including plastering, neat cement finish etc. Complete as per direction of E.I.C.( Size: 1.00 mtr. X 1.4mtr.)The above base of tubewell is to be made with 250 mm. thickness brick wall on all side with 200 mm. thick F.C. slab on top including plastering and neat cement finishing.

Add: GST @ 18%

Add: Cess @ 1%

SUPPRIM ELECTRIC (BID ID -6382086)

CHANDIMATA ELECTRICALS (BID ID -6385672)