ADDN ALTN TO CERTAIN OMQS AT 23 WING UNDER GE (AF) JAMMU UNDER GE (AF) JAMMU

M&L for joint free colored non skid ceramic tiles 7to8 mm thick of any design, pattern as approved by GE/USER, area of each tile exc 0.11 and n. exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in colored cement over and incl 15 mm thick screed bed or bedding layers of cement mortar 1:6 to match Shade, pattern, laying etc including taking down / demolition of existing tile/PCC Floor/Terrazo flooring and including removal of debris out of the defence line at govt approved dumping area and no extra cost will be paid for the same complete all as specified directed by Engr-in-Charge.

M&L for 300x600 x(7 to 8) mm thick joint free coloured of any design, pattern as approved by GE/USER glazed ceramic tiles of premium quality as in dado/ skirting and vertical surfaces set & jointed in neat cement slurry and pointed in colored cement over and incl 10 mm thick cement mortar 1:4 to match the Shade, pattern, laying at site including taking down of existing tile/plaster/terrazo dado including removal of debris out of the defence line at govt approved dumping area and no extra cost will be paid for the same complete all as spd and directed by Engr-in-charge.

Taking down chowkhats or frames not exc. 1.5 sq. m each with shutters (without taking off shutters from the frames) complete all as specified directed by Engr-in-Charge. Note:- Including make good the Jam of window/Door to receive new door/window by brick work,plaster and matching finishes including tiling as required also no extra payment should be made to the contractor against the same.

Taking down Chowkats or frames exc 1.5 sq. m but n exc 4 sq m each with shutters (without taking off shutters from the frames) complete all as specified directed by Engr-in-Charge. Note:- Including make good the Jam of window/Door to receive new door/window by brick work,plaster and matching finishes including tiling as required also no extra payment should be made to the contractor against the same.

S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) frame work for doors,windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size,including necessary filling up the gaps at junctions, i.e. at top,bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws including all complete as per architectural drawings and the directions of Engineer-in-Charge

S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling C.P. brass/ stainless steel screws including aluminium hook & eye, hinges and handle complete all as per architectural drawings and the directions of Engineer-in-charge.

S&F for Anodised Aluminium Grill (anodised transparent or dyed to required shade according to IS:1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the window frame with C.P. brass/ stainless steel screw ( non- magnetic) @150 mm centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved aluminium standard section around the opening, all complete as per requirment and direction complete all as specified and as directed.

S&F for factory made 35mm thick 2nd class hard wood Plain, framed, panelled shutters, with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces.The size of rail and stile as per IS:1003 (Part-I), kiln seasoned and chemically pressure treatedmedium density, wood particle board with commercial face veneers fitted to chowkhat including hinges, sliding bolt, tower bolt, handle complete all as specified and as directed by Engineer-in-Charge.

S&F for factory made 35mm thick 2nd class hard wood, glazed and skeleton shutters, open rebated and prepared to receive glass/gauge etc divided into squares, with plain , chamfered or rounded, mitred and rebated sash bars, any numbers edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of door shutters as specified in SSR Part-I sec 8 clause 8.20 (a), fixed to chowkhat including hinges, sliding bolt, tower bolt , handle all as specified and as directed by Engineer-in-Charge.

S&F 5.5mm thick, ordinary quality and glazing with rouber beading, joining cleat etc in squar n exc 0.5 sq. m in each pane complete all as specified and as directed bu Engr-in-charge.