Construction Residential quarters for official staff of Panchayati Raj and Zila Parishad in Panchayat Bhawan Pakka Tank Nahan

Amount

Excavation in foundation trenches etc. in earth work in all kinds of soil such as pick work ,pick jumper work , jumper blasting work , soft and hard blasting ,saturated soil , including chiseling or any other mixed variety of soil in all leads dewatering and or removal of slush and other incidentals , lift up to any height including stacking the excavated soil clear from the edge of excavation and than returning the stacked soil in all thickness of layers when required into plinths side of foundation etc. consolidating each deposited layer by ramming and watering then disposing of all surplus excavated earth as directed by the Engineer-in- charge with in all leads , lifts and other incidentals .

Providing and laying, machnically mixed and vibrated cement concrete 1:6:12 (one cement:Six sand Twelve graded crushed stone agregate 40 mm (forty milimeter) nominal size) inculding curing as required at site complete exculding the cost of form work but inculding all leads and lifts of materials in foundation and plinth and asper direction of Engineer -in -charge.

Randum rubble masonary coursed with hard stone of approved quality in foundation and plinth in cement mortor 1:6 one cement:six sand)

P/F of brick work in super structure using common burnt clay building brick using C.M. 1:6

P/F of half brick masonary in super structure using common burnt clay building brick with CM 1:4.

P/F of form work of ordinary timber planks to give the rough finfish i.e centering, strutting & propping etc. complete

P/L of RCC 1:2:4 ( 1 cement :2 sand : 4 graded stone of 20 mm nominal size )including curing but excluding the form work & steel work

P/L of tor steel including cutting, bending, binding cranking &placing in position complete.

Providing wood work in frames of doors & windows clerestory, windows and other frames wrought ,framed and fixed in position of sal wood inculding carriage of material with in all leads , lifts and other incidentials .

Providing and fixing panalled shutters with 40 mm thick frame of first class deodar wood for doors and pannels of 12 mm thick prelaminated board both side bwp phenol bonded exterior/interior grade including bright finished/black enamelled iron butt hinges with necessary screwsetc. complete.

15mm (fifteen millimeter) thick cement plaster in single coat on rough / fair side of brick /concrete/stone wall for interior plastering for all floors including arises internal rounded angles chafers and / or rounded angles chamfers and/ or rounded angles not exceeding 80mm (eighty millimeters )In girth and finished even and smooth in cement mortar 1:6 (one cement :six sand )as per direction of engineer in charge including carriage of material within all leads lifts in all floors and other incidental

Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) or its equarlied on undecorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc including sand paper smooth complete.

Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete.

Providing and fixing 10mm thick anti skid water proof stain and impect resistent heavy duty vetrified tiles Nitco or equivalant 600x600mmx10mm manufactured of approved shade and colour in flooring, treads of steps and landings laid over 12mm thick cement mortar 1:3 (1 cement : 3 sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete.

White glazed tiles 6mm thick in skirting, riser of steps and dado 12mm thick cement mortar 1:3 (1 cement : 3 sand) finished with flush poining in white cement.

Providing and fixing anodized aluminium sliding door bolt anodized colour and shade with bolts and nuts screws etc. complete 300x16mm

Providing and fixing aluminium tower bolts (berrel type) anodized trans parent or dyed to required shade and colour with screws etc. complete

Providing and fixing aluminium handles anodized transparent or dyed to required colour & shade with necessary screws etc. complete.

Providing and fixing bright finished hard drawn hooks and eyes.150 mm

Providing and fixing vitreous china wash down closet (European type W.C. pan) of Cera , Hindware or equvalent ) with integral P or S trap including jointing the trap with soil pipe in cement mortar 1:1 (one cement : one sand) seat and cover to be measured and paid for separately anglo Indian universal closet as per direction and to entire satisfaction of Engineer-in-charge including carriage of material within all leads and lifts upto all floor levels.

PTMT Coloured / white / coloured high density polyethylene / poly propylene 10 litres capacity ( full flush) European standard control low level flushing cistern with fittings with a pair of brackets with fittings such as lead valve, syphon, 15mm nominal size PVC ball valve with polythene float, with push button, couplings for connections with inlet, outlet and over flow pipe, 40mm dia C.P. flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (overflow pipe to be measured and paid for separately) .

Providing and fixing white plastic seat (solid type) and cover for wash down closet with chromium plated brass hinges and rubber buffers complete including carriage of material with in all leads and lifts

Providing and fixing vitreous china wash basin of Cera, Hindware or equvalent with single hole for pillar tab with cast iron or steel brackets painted white including cutting holes and making good the same but excluding the fitting including cost of carriage of materials upto all leads and lifts in all floors Flat back 550 X 400 mm.

Providing and fixing stainless steel kitchen sink of approved standard ISI make with drain board and C.P. wase with C.I. of M.S. Brackets painted white including cutting holes and making same bu excluding fitting 610 X 510 mm with bowl depth 200 mm

Providing and fixing 32 mm dia (thirty two millimeters ) chromium plated brass waste for wash basin or sink including cost of carriage of material upto all leads and lifts in all floors.

Providing and fixing PTMT grating round of approved quality and colour 100 mm nominal dia.

Providing and fixing CP brass bib tap with wall flange ( superior or heavy quality of ESS ESS, Jaguar or equvalent make) 15mm (fifteen millimeters ) dia with capstan head complete including carriage of material with in all leads lifts in all floors levels etc. complete

Providing and fixing 15mm dia ( fifteen millimeters) chromium plated brass pillar tap with capstan heads of ESS ESS, Jaguar or equvalent make complete in all respects including carriage of material with in all leads lifts in all floors

Providing and fixing CP brass angle valve 15mm (ESS ESS, Jaguar make or equvalent) in all respects including carriage of material with in all leads lifts in all floors

Providing & Fixing Mixer for Kitchen sink of ESS ESS, Jaguar makle or equvalent with casted swing spout at top.

Providing and fixing 600 mmx 450 mm ( six hundred into four hundred fifty millimeters) beveled edge mirror of superior glass mounted on 6 mm (six millimeters) thick A.C sheet or plywood sheet and fixing to wooden plugs with chromium plated brass screws and washers complete including carriage of material upto all leads and lifts in all floors

Providing and fixing CP brass towel rail / ring (ESS ESS, Jaguar make or equvalent)complete with CP brass brackets fixed to wooden plugs with CP Brass 600 mm X 20 mm dia (six hundred millimeters into 20 milimetre) complete including cost of carriage of materials upto all leads and lifts in all floors

Providing and fixing PTMT Jet sprayer with 1.5 mtr tube including carriage of material with in all leads and lifts

Providing and fixing PVC connection with brass union 300 / 450 mm length 15mm size.

Providing and fixing brass Full way valve with steel wheel including carriage of material with in all leads and lifts

15mm (fifteen millimeters)nominal bore

20mm(twenty millimeters)nominal bore

Providing and fixing to wall ceiling and floor gal vanished mild steel tubes of TATA Or Jindel or Equvalent (medium grade) tube fitting and clamps including making good the wall and ceiling and floor complete including carriage of material upto all leads in all floors

15 mm (fifteen millimeters) nominal bore

20 mm (twenty millimeters) nominal bore

Providing and laying 20mm (twenty millimeters) nominal bore in trenches gal vanished mild steel tube of TATA Or Jindel or Equvalent (medium grade) tube fitting earth work in trenches tube measured and paid for separately complete including carriage of material upto all leads and lifts in all floor

Providing and fixing PVC water storage tank of Sintex or equvalent make of ISI :12701 Marked, G.I. inlet and outlet connection , 15mm nominal bore ball valve and mosquito proof PVC cover with locking arrangement including hoisting up to all heights above ground Level (1000 litres net capacity tank)including carriage of material upto all leads and lifts in all floor

Providing and fixing PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive ,cost of cutting and making good the wall and floors etc. complete 110 MM X 75 MM including carriage of material upto all leads and lifts in all floor

Providing and fixing PVC P/S trap ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete 110 MM including carriage of material upto all leads and lifts in all floor

Providing and fixing high pressure (Phinolix or equivalent) PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete.

75 MM (Seventy five millimeters Dia )

110 MM (one hundred ten millimeter Dia )

Providing and fixing (Phinolix or equivalent) PVC single equal branch with oval access door, ISI marked insertion rubber washer 3 mm thick bolts and nuts complete including fixing with approved adhesive etc. complete

75 MM (Seventy five millimeters Dia )

110 MM (one hundred ten millimeter Dia )

Providing and fixing (Phinolix or equivalent) PVC door bend with oval access door, insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete.

75 MM (Seventy five millimeters Dia )

110 MM (one hundred ten millimeter Dia )

Providing and fixing (Phinolix or equivalent) PVC collars ISI marked including fixing with approved adhesive etc. complete.

75 MM (Seventy five millimeters Dia )

110 MM (one hundred ten millimeter Dia )

Providing and fixing (Phinolix or equivalent) PVC plain bend ISI marked including fixing with approved adhesive etc. complete

75 MM (Seventy five millimeters Dia )

110 MM (one hundred ten millimeter Dia )

Constructing brick masonary chamber for under ground C.I inspection chamber and bends with common burnt clay building bricks in cement mortar 1:5 (one cement: five sand)C.I cover and frame( light duty) 355x610mm internal dimension total weight with cover and frame to be not less than 38kg (weight of cover 23kg and weight of frame 15kg ) RCC top slab with 1:2:4 mix (one cement: two sand: four graded stone aggregate 20mm nominal size) 1:5:10 (one cement : five sand: the graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3(one cement: three sand) finished with a floating coat of neat cementon wallsand bed concrete etc complete including curing complete. including carriage of material upto all leads and lifts in all floor

Inside dimensions 455mm x610mm x450mm deep for single pipe line

Inside dimensions 600mm x850mm x450mm deep for pipe line with three or more inlets

Providing and laying 200mm cast iron rungs with chequred or ribbed non slip surface including and fixing in main holes with 200x200x200mm cement concrete 1:3:6 stone of 20mm nominal size including carriage of material with all leads and lifts and other incidentals

Demolition of brick work above G.L. upto floor two level including stacking of serviceable materials and disposal of un-serviceable materials within 20 metres.lead.

Providing and fixing in position collapsible steel shutters with vertical channels 20 mm X10 mmX2mm and braced with flat iron diagonals 20 mm X5 mm size with top and bottom rails of T.iron 40 mm X40 mm X6 mm with 38 mm dia steel pulley complete with bolts and nuts locking arrangements, handles, including applying a priming coat of red lead paint.

jagdish

rajneesh katna