SPECIAL REPAIR TO EXISTING TOILET BLOCKS OF STN AUDITORIUM, PROVN OF OVERHEAD PARKING SHED AT MT SECTION AND SPL REPAIR TO EXISTING BOUNDARY WALL WITH Y NECK BARBED WIRE FENCE ON TOP AT OFFRS MESS UNDER GE DEHU ROAD.

Amount

Demolition brick or stone masonary built in cement mortar including all quoins arches pillars etc but excluding ashlars facing dressed stone work and precast concrete block, complete all as specified

M&L for brick work with sub class 'B' bricks straight or curved on plain exc. 6m mean radius built in CM 1:6

M&L for brick work with sub class 'B' bricks straight or curved on plain exc. 6m mean radius in half brick walls built in CM 1:6

M&L for 15 mm thick rendering in cement mortar 1:4 on fair faces of brick work or concrete surface and finishing the surface even and smooth without using extra cement secified and directed by Engr-in-charge.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces finished even and smooth in cement mortar 1:6, complete all as specified

M & L for Preparation of new previously plastered or unplastered surfaces of walls and applying two coats of oil bound distemper in approved colour/ shade over a coat of chalk whiting primer after preparation of surfaces complete.

M & L for preparing newly plastered or previously untreated walls surfaces and applying two coats of cement base paint over one coat of primer complete all as specified and directed.

Demolition of PCC in ground floor & pavings incl tiles etc n exc 15cm thickness (below or above ground level) and disposing of debris out of MOD land all as directed.

M&L for 75mm thick P.C.C 1:4:8 type D-2 in sub base of floor complete all as specified and directed by Engr-in-Charge.

M & L for 25 mm thick PCC 1:2:4 type B1, 20 mm graded stone aggregate as in flooring including finishing cement concrete rough surface with out using extra cement.

Dismantling floor hearth or wall tiling incl cement mortar bedding but not backing, removing serviceable tiles to stores complete all as specified.

M & L for non skid coloured ceramic tiles 7 to 8mm thick square / rectangular area of each tile exc 0.06 Sqm but not exc 0.11 Sqm as in floor laid over 15 mm thick screed bed in CM 1:6 as in floor etc. set and jointed in neat cement slurry and pointed in coloured cement to match the surface of tile complete all as specified and directed by Engr-in-charge.

M&L for glazed coloured ceramic tiles 350 mm x 250mm/450mmx350x7 to 7 mm thick as in vertical surfces set & jointed in neat cement slurry & pointed in coloured cement incl backing coat 10mm thick in CM 1:4 all as direced.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar all as specified.

M&L for Machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed no pigment to match the shade of the slab including rubbing and polishing complete all as specified.

M&L for Marble work green marble 18 to 20 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like any other use in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with green marble shade complete all as specified.

M & L for Reinforce cement concrete Type B1 1:2:4 (20 mm graded aggregate) Beams, cantilevers, bressumm ers, lintels over 1.5m spcomplete all as specified and directed.

M & L for Reinforce cement concrete Type B1 1:2:4 (20 mm graded aggregate) in chajja complete all as specified and directed.

M & L for use & waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, bands, cantilevers, shelves including supports, overhangs etc. also splayes between floors and beams in rough finished flat surface of concrete complete all as specified and directed.

Formwork to chullah hoods, chhajjas, troughs and similar items in?cluding edges

M & L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M & L for mild steel TMT bars 5 mm dia and over upto and including 10 mm dia as in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

Taking down chowkats or frames with shutters ( without taking off shutters from the frame) exc 1.5 sqm but n.exc 4 sqm each and removing to store.

Ditto as above but n'exc 1.5 Sqm each.

Supply & Fixing PVC door frame (50x47) mm made out of plain colour 5 mm thich PVC Sheet re in forced with MS Square Tube, supplying & fixing in opening as per specification & drawing

S&F factory made solid panel PVC door shutter 30 mm thick ( Style ) consisting of frame made out of MS Tubes for top & bottom rails.MS frame shall be covered with heat moulded plain colour PVC ' C 'Channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC Sheets for top rail , lock rail & bottomrail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC Sheet to be fitted in the MS Frame welded / sealed to stiles & rails with suitable PVC Sheet beading, jointed together with solvent cement,supplying & fixing in the frame at site as per specification & drawing.

Supply and fix in repair for aluminium powder coated partition using ‘Jindal’ aluminium SP/ DP section or equivalent make as specified with 5mm thick tinted glass, PVC rubber beading,12mm thick prelaminated particle board fixed with glazing clips etc complete all as specified and as directed. Sections : SP (Single partition) - 20033, DP (Double partition) - 20034,Glazing clips - 4407

S&F anodised aluminium window and ventilator shutters,(three track)fixed type without sash bar ,aluminium section weighing 0.55 kg/m. including necessary joining cleats ,glazing clips,rubber packing,anodised aluminium snap beading,screw with powder coating of any colour (thickness of powder coating not less than 50 micron ) including stainless steel wirecloth 0.36 mm nominal dia of wire and avg. aperture 1.40 mm and fixed with stainless steel wire staples and 3.0 mm th. sheet glass ordinary quality plain and glaizing complete all as specified and directed.

Dismantling asbestos cement (corrugated/ semi corrugated etc) sheet in roof covering complete all as specified and directed.

S & F for Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed by Engr In Charge.

M & L For Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick for ridge of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

Dismanteling MS works of any desc. not otherwise provided for complete all as specified.

S&F Rolled Sections as in main croos beams , hip and jack rafters; purlins, where connected to common rafter , posts etc. conf to Fe-410-w(gdeE-250 quality-A)

Dismantling wall/ ceiling boards(fiber pulp insulation etc.) or insulations boards /slabs/blankets any thickness incl. cover fillets

M and L for 10 mm thick Polypan PS 20010 Prelam PVC (hallow profile) sheets used for fixing on wall Lining and PVC false ceiling inclusive of necessary fixing as directed by manufacturer and engr-in-charge.

S&F 1000 Ltrs capacity PVC Rotational Moulded polyethylene water storage tanks (Cylindrical vertical with closed top) double layer hoisted and fixed in position all as specified.

S&F 20mm bore ball valve high pressure of PTMT with epoxy coated alluminium rod and high density plastic ball secrewed for iron pipe and fixed . ( Minimum wt 15 mm - 142 gms/20 mm - 210 gms)

S&F 15 mm dia of pipe Gun-metal, globe or gate valvees with iron wheel head, screwed both ends for iron pipe and fixed.complete all as specified and directed by Engr In Charge.

S&F 20 mm dia of pipe Gun-metal, globe or gate valvees with iron wheel head, screwed both ends for iron pipe and fixed.complete all as specified and directed by Engr In Charge.

S&F 15mm bore Galvanised steel tubes, 'medium grade' with all fitting and fixed complete to walls and ceilings or laid in floors complete (all fittings concealed) incl taking down all as specified and directed by Engr In Charge..

S&F 20mm bore Galvanised steel tubes, 'medium grade' with all fitting and fixed complete to walls and ceilings or laid in floors complete (all fittings concealed) incl taking down all as specified and directed by Engr In Charge..

Supply and fixing for vitreous china european dual type one piece type water closet with flushing cistern of size 780x375x700 mm star white over and including fittings such as 'S' or 'P' trap distance pieces 100 mm long etc complete make : Hindware cat part No 92071 or equivalent (CERA) all as specified and approved Accepting officer.

S&F repairs Vitreous China wash down water closet pan (Pedestal pattern) white complete incl seat and cover, flush pipe incl all joints complete. Make: CERA

S & F PVC valveless, syphonic action type, 10 ltr flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, CP down pipe and connecting to the WC and making good to the floor with PCC including waste pipe all as specified and directed. Make: CERA

S&F bib taps 15mm dia fancy type chromium plated, screwed down, screwed for iron pipe or for brass ferrule and fixed. complete all as specified and directed by Engr In Charge. Make: JAGUAR

S & F in repairs Angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed, (Minimum weight 15mm-90gms Make: JAGUAR

S&F in repairs 15mm dia stop valves , fancy type chromium plated, screwed down, screwed both ends for iron pipe or for unions and fixed. complete all as specified and directed by Engr In Charge. Make: JAGUAR

Supply & fixing in repairs 15mm pillar taps cast copper alloy, with capstan heads, chromium plated, screwed down , high pressure, with or without lettered 'Hot' or Cold' with long screwed shanks and fly nuts, screwed for iron pipe and fixed. Bore of pipe in 15mm complete all as specified and directed by Engr In Charge. Make: Jaguar

S&F in repairs for waste coupling of PTMT for 32 mm bore dia of discharge pipe (half or full threaded) Minimum weight 32mm-45gms/40mm-60 gms)

S&F PVC connections 15mm size with PTMT nuts of length 600mm

S&F urinal spreader of PTMT 15mm size with PTMT nuts of length 300mm complete all as specified and directed by Engr-in-Charge

S&F C P floor trap 75mm out let dia with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4)..

M & L for Gully traps salt glazed stoneware (SGSW) square or round mouthed type 'P' of size 180x100mm for drain pipes complete all as specified and directed.

S&F repair CP jet spray with one mtr flexible tube 15mm dia for EWC including all connection complete and all as specified by Enr-in-Charge

S&F repair health Faucets with flexible tube 15mm dia for EWC including all connection complete and all as specified by Enr-in-Charge

M &L for MS work as in wind tie or any other work incl cutting, drilling holes etc.

S & F in repairs 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints laid in floors or trenches.

S & F in repairs 75 mm dia bore PVC (SWR) pipes single socketed , in any length with rubber ring joints , laid in tenches or in floors

S & F in repairs 75 mm dia bore PVC (SWR) bends any radius

S & F in repairs 110 mm dia bore PVC (SWR) bends any radius

S & F 110 mm dia bore PVC (SWR) junction single 'T' equal or unequal

S & F PVC (SWR) 110 mm bore vent cowl

M&L for reinforced cement concrete pipes class NP-3 , laid in trenches & jointed complete with collars, dia of pipe 150 mm .

M&L for PCC (1:4:8) type D2 (using 40 mm graded stone aggregate) as in bed to drain pipes, incl packing under & hauching against the sides of pipes after they are laid and tested for 150 mm bore RCC pipe.

S & F wall mount hand drayer of white color, make of ABS material 220 V power consumption 1800W, protection class-IPXI, Hand dry time 15-20 sec, Temp : Wind : 60 + 20 Celcious

S & F wall mount electric stainless steel LED toilet sign board size of 600 x 300 mm for ladies and Gents common including hanging chain separately

S & F wall mount electric stainless steel LED toilet sign board size of 300 x 100 mm for ladies and Gents common including hanging chain separately

Excavating in post holes in Hard/ dense soil (or similar holes) each n exc 0.5cum getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers n exc 25cm, watering and removing surplus soil to a distance n exc 50m and making good surface

M&L PCC 1:3:6 type C-2 (using 40mm graded stone agg ) as in foundation concrete for Post holes complete all as specified and as directed

S&F for roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy brackets framing (beam, tee, angle, channel or flat sections) of FE 410-W (Gde-E-250) quality A, including distance places, cleats etc.

S & F for Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. Within 20mm of the length indicated) of FE 410-W (Gde-E-250) quality A, including distance places, cleats etc.

S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, welded attachment

Demolition of Cement Concrete of any description (plain/reinforced)and in any position not otherwise specifically provided for & removal of rubbish outside MD land all as specified and directed.

Demolition of brick work built in cement mortar including all arches, pillars all quoins etc complete all as directed.

M & L RCC M 25 Design Mix (Using 20 mm Graded Stone aggregate) in Columns, pillars, piers, posts and struts all as specified and directed and as shown on drawing.

M & L for Formwork to sides of pillars, posts, struts, piers, columns and stanchions for rough finished of surface of concrete flat all as specified and directed.

M & L for PCC type B1(1:2:4, using 20mm graded stone aggregate) as in bed blocks/coping/ edging including use & waste of formwork for fair finished surfaces complete all as specified and directed.

Material and labour for Fly ash brick masonry with solid blocks, exc. 10 cm in width Type C1 1:3:6 (20 mm graded aggregate ) and setting in mortar CM 1:6, complete.

M&L for rendering 10 mm thick in CM 1:4 on fair faces of brick work or concrete surfaces with sponge finish all as specified and directed.

S & F in Galvanised. 4 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc all as specified and as directed by Engr-in-Charge. (each line wire to be measured)

M&L for preparation of new surfaces of steel of any description over 10cm in width or girth apply two coats of synthetic enamel paint over a coat of Red oxide primer complete all as specified.

H S TAKHI (BID ID -3272174)

Star Construction (BID ID -3272262)

M/S B.A. GAIKWAD (BID ID -3272117)