REPAIR AND REPLACEMENT OF INTERNAL ELECTRIFICATION, FAN, GEYSER, EXTERNAL ELECTRIC SUPPLY, LT STREET POLES, ACSR CONDUCTORS, LT PANELS AND EXTERNAL WATER SUPPLY CONNECTED WORKS AT MILITARY STATION BARABANKI UNDER GE (EAST) LUCKNOW (THIRD CALL)

Amount

Excavation in trenches not exc 1.5 m wide and not exc 1.5m deep for laying of pipe, cable etc and getting out in soft/loose complete all as specified and directed.

Excavation in trenches exc 1.5 m wide and not exc 1.5m deep for laying of poles etc and getting out in Hard/Dense soil complete all as specified and directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm thick in soft/loose soil complete all as specified and directed.

Removing surplus excavated material to a distance not exc 50 meter and depositing where directed at level not exc 1.5m above the starting point, complete all as specified and directed.

M&L for sand cushioning for protection of cables complete all as specified and directed.

Supplying & laying common bricks sub class B for for protection of cable complete all as specified and directed.

S&F GI tubes light grade of size 40mm galvanised with all fittings for road crossing including taking down / dismantling the old items complete all as specified and directed.

S&F mild steel cross arms channel, bracing, support, clamps etc fabricated structured steel, sections, including nuts, bolts, washers etc and cutting to required length beat to any shape drilling holes, fixed on poles or jointed by means of elect welding including taking down / dismantling the old items complete all as specified and directed.

Supply, fixing and erection 2 pole structure on 11 mtr steel tubler pole consisting of poles complete with cast iron base plate, final taper plug, bolts, nuts and screws with Anti climbing device, PCC foundation, cross arms etc for one incomming and two out going complete all as specified and directed. Note :- (a) Cost of 11 mtr steel tubler poles are included in the item. (b) Cost of Lightning arrester, GOD, Danger notice Board , Exacavation and connected items, cross arms, nuts, bolts, washers etc and connected accessories shall be measured and paid seperately under relevent items.

M&L for cleaning and preparation of old painted surface of steel tubular pole 11 mtr long and brackets and painting with two coat of aluminum paint including brackets including applying two coats of cement base paint to coping, complete all as specified and directed.

Supply and errect Lightning arrester for 2 pole structure HT 11 KV 10 KA station class complete all as specified and directed.

Supply and errect HT 11 KV out door type Gang operated Air break switch suitsble for horizondal and vertical mounting type complete with 9 insulator of rating upto 200 Amps complete all as specified and directed.

Supply and fixing aluminium conductor steel reinforced for extension from existing structure and using in construction of 2 pole structure, etc complete all as specified and directed.

Supply and laying of graded coarse aggrigate of size 40 mm in the station yard for laying complete all as specified and directed.

S&F in repair danger notice plate of 1.6 mm thick mild steel sheet, duly painted with white synthetic enamel paint, with letters, figures and conventional skull and bones in signal red colour and fixed with screws, nut bolts with adequate size clamps on HT/LT pole of 25x20 cm size complete all as specified and directed.

M&L for PCC (1:4:8) type D-2 using 40 mm graded aggregate as in base foundation of pole concrete including providing necessary form work complete all as specified and directed.

M&L for PCC (1:3:6) type C-2 using 40 mm graded aggregate as in foundation of pole/stay and filling of mass concrete including providing necessary form work complete all as specified and directed.

M&L for PCC (1:2:4) type B-1 using 20 mm graded aggregate as in coping of pole including providing necessary form work complete all as specified and directed.

S&F 10 sqmm 2 core aluminium unarmoured, flame resistant PVC flat cable, ISI marked complete all as specified and directed.

M&L for removing the vegetation growth for site clearence in soft /loose soil in around HT/LT poles, around E/M installations complete all as specified and directed.

S&F cable jointing kit for 11 KV grade cable for outdoor termination , heat shrink type, joint complete with jointing material and accessories suitable for 3 core XLPE, armoured, Al conductor cable of size 95 sqmm complete all as specified and directed.

Supply, laying and testing cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 3 core, 95 Sqmm complete all as specified and directed.

Supply, laying and testing cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 70 sqmm 3.5 core, including taking down / dismantling the old items complete all as specified and directed.

Supply, laying and testing cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 16 sqmm 2 core, including taking down / dismantling the old items complete all as specified and directed.

Supply, laying and testing cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 25 sqmm 4 core, including taking down / dismantling the old items complete all as specified and directed.

Supply, laying and testing cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 35 sqmm 3.5 core,including taking down / dismantling the old items complete all as specified and directed.

Supply, laying and testing cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 50 sq. mm 3.5 core,including taking down / dismantling the old items complete all as specified and directed.

S&F heat shrinkable jointing kit for 3 ½ / 4 core XLPE, armoured cable of size 25 to 50 sqmm including taking down / dismantling the old items complete all as specified and directed.

S&F heat shrinkable jointing kit for 3 ½ / 4 core XLPE, armoured cable of size 70 to 120 sqmm including taking down / dismantling the old items complete all as specified and directed.

S&F HT/LT MS cable route indicator engraved the descriptio on the disc not less than 6" dia welded with 40 x 6 mm MS strip of approx length 90 cm duly painted on all steeel parts as per color code and provision of PCC 1:4 :8 type D2 using 40 mm graded stone aggrigate of not less than 0.05 CUM in each base burried under the ground incl necessary earth work including taking down / dismantling the old items complete all as specified and directed.

S&F alluminium bus bar made out of alluminium alloy upto 500 Amps current rating /bolted type with nut, bolts, washers in repairs including taking down / dismantling the old items complete all as specified and directed.

S&F Post insulator suitable for 11 KV working pressure in GOD/DO of any description complete all as specified and directed.

S&F Pin insulator 150 mm da , 150 mm length suitable for 11 KV working pressure in pole of any description complete all as specified and directed.

S&F shackle Type insulator 150 mm da , 150 mm length suitable for 11 KV working pressure in pole of any description with GI strap 38x5 mm and bolt of 20 mm dia complete all as specified and directed.

M&L in replacement earthing complete with galvanized steel earth plate electrode 60 cm X 60 cm X 6.0 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of plate not less than 1.5 mtr below ground level connecting to the GI strip 32 x 6mm, by means nut bolt, nuts, check nuts and washer of the GI Earth wire protected by provision of GI light grade pipe 40 mm dia incl provision of concrete pit in PCC (1:2:4) type B-1 using 20 mm graded stone aggregated with 40 mm thick cover with RCC (1:2:4) reinforced with XPM (weight not less than 4 Kg / Sqm) and frame of angle iron 25mm X 25 mm X 3mm with lugs 2 Nos and with 6 mm dia MS bar handle made to shape, GI light grade 20 mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edge of earth plate, common salt and charcoal filling, taste point made out of phosphorus bronze with fixing arrangement, funnel, wire mesh and earth work in hard/dense soil, returning filling in and removal of surplus soil to a distance not exceeding than 50 mtr, all as per electric plate No 3 of SSR Part I 2009 and connection to earth test point all as specified including testing on completion”.

S&F in replacement of earth continuity conductor with adequate size saddles fixed to wall on batten or recess or any other indicated situation for loop earthing etc. as required 32mm x 6mm GI strip including taking down / dismantling the old items complete all as specified and directed.

M&L for stay assembly comprising of 20 mm dia stay rod 2150 mm long, loop type insulator of size 90 mm x 140 mm, galvanised stay plate 6mm thick of size 300 mm x 300 mm, stay bow, stay clamps etc. & shown in EP No. 1 of SSR Pt I.including taking down / dismantling the old items complete all as specified and directed. Note : Excavation, earth work and PCC shall be measured and paid seperately.

M&L for Galvanised stay strand 7/4 mm including taking down / dismantling the old items complete all as specified and directed.

M&L for point wiring with 1.5 Sq mm nominal cross sectional area, single core, 1100 Volt grade, multi-stranded, PVC insulated, ISI marked, unsheathed FRLS copper conductor cable with and including continuous earth wire of size 1.5 Sq mm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 20 mm dia or higher, ISI marked, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and replacement of sunk zinc coated pressed steel terminal box of 1.60 mm thick with 3 mm thick plastic laminated sheet top cover, brass screws, cup washers etc and making good to the disturbed surfaces to match the existing complete all as specified and directed for one light / fan point controlled by one, one way switch 06 Amp including taking down carefully existing copper/aluminium point wiring such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc.

All as per item No 41 above but in PVC Caping and Casing accessories for light/ fan/Exhaust point complete

All as per item No 41 above but 5 Amp socket outlet on independent board .

All as per item No 41 above but on the same board.

All as per item No 41 above but 2.5 sq mm wire for one 15 Amps socket outlet independent with continuous PVC insulated single core green colour copper earth wire of size 2.5 sq mm connected to common earth dolly all as specified.

All as per item No 41 above but for one bell/Buzzer point controlled by one bell push button on the same board with other switches or independent with 1.50 sqmm size cable all as specified.

S&F in replacement switch piano flush type 5/6 Amp one way single pole, 240 volts, ISI marked all complete all as specified and directed.

S&F socket in replacementoutlet 5/6 Amp 3 Pin 240 volt flush type, ISI marked complete all as specified and directed.

S&F in replacement switch socket outlet two in one 5 & 15 Amp 6 pin multipurpose combination, ISI Marked complete all as specified and directed.

S&F in replacement Bell push piano flush type single pole 240 volt, ISI marked complete all as specified and directed.

S&F in replacement Modular switch piano type 10 Amp 1 way single pole 230 V all as specified. Make: Anchor/SSK/Crabtree (Havells)

S&F in replacement Modular switch piano type 16 Amp 1 way single pole 230 V all as specified. Make: Anchor/SSK/Crabtree (Havells)

S&F in replacement modular socket outlet 6 Amp 2/3 Pin 240 volt flush type all as specified. Make: Anchor/SSK/Crabtree (Havells)

S&F in replacement modular socket 2/3Pin ,6 & 16 Amp 2 module multipurpose all as specified. Make: Anchor/SSK/Crabtree (Havells)

S&F in replacement modular bell push single pole 1 module6 Amp, 240 volt all as specified. Make; Anchor/SSK/Crabtree (Havells)

S&F in replacement Bell ding dong type, AC, 230V, single pole complete all as specified & directed.

S&F in replacement ceiling rose 2 plate three terminals surfaces bakelite 65x50mm size, ISI marked all as specified.

S&F in repair electronic ceiling fan regulator having 5 rotary step, two module, humfree, AC, 240 volt, 100 Watt and duly ISI marked complete all as specified & directed. Make: Havells/Bajaj/Anchor

S&F in repair modular electronic ceiling fan regulator having 5 rotary step, two module, humfree, AC, 240 volt, 120 Watt and duly ISI marked complete all as specified & directed. Make: Havells/Bajaj/Anchor

S&F in replacement single pole and neutral sheet metal enclosure with two pin earth plug and socket complete including one double pole MCB 20 Amps, 240V capacity all as specified and directed.

S&F in replacement of surface mounted LED tube light fitting four feet long, 18-22 Watt, 2000 lumen, Polycarbonate diffuser having 3000K warm day light with IP 20 protection comprises of aluminium extruded channel, frosted diffuser, integrated electronic driver, etc and all accessories pre-wired including connecting up complete all as directed. Make : Havells Cat Part No ENDURALINEARNEOBS20WLED830SPCWH or equivalent in Crompton / Philips.

S&F in replacement of LED mirror light fitting, 14 Watt, 2 feet long with IP 20 protection comprises of aluminium extruded channel, frosted diffuser, integrated electronic driver, etc and all accessories pre-wired including connecting up complete all as directed. Make : Crompton Cat Part NO LCL-14-CDL or equivalent in Havells / Philips.

S&F in replacement of LED security light fitting 36 watt, with IP 65 protection comprises of a pressure die cast aluminium housing, LED lenses, lens embedded PC cover, surge protector, electronic driver, etc and all accessories pre-wired including connecting up with PVC insulated copper conductor cable 1.5 Sq mm, 3 core as required for connections and 32 mm bore light grade G. I. tube mounting bracket of 1.5 metre in length, bend to shape at 140 degree in ‘L’ shape and fixed to wall by means of 02 nos. of 40 x 5 mm flat iron clamps, nuts, bolts and washers etc complete all as directed.

S&F in replacement of decorative wall mounting type SS finish fixture with opal glass diffuser suitable for 15 W LED bulb, 230 Volt lamp holder, 15 Watts LED lamp B22 warm day light etc and all accessories pre-wired including connecting up complete all as specified and directed. Make Havells, Cat No. LHJE01106499 (Aristo) or equivalent in Philips or CG.

S&F in replacement of surface mounted LED batten tube light fitting four feet long 20 watts 6500K extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver and all accessories pre-wired including connecting up complete all as directed. Make : Havells Cat Part No LUMILINEPLUSBS20WLED865SPCSS or equivalent in Crompton / Philips.

S&F in repair LED lighting fixture with extruded aluminium, heat sink, environmental friendly, energy efficient ready to use suitable for 4' LED tube complete all as specified and directed. Make: Havells Cat Part NO REGALBATTENT8UPTO1X22WSSBSWH or equivlent in CG/Philips.

S&F in replacement of single side connection LED T8 tube rod 20 Watt with PC body and diffuser, >2000 lumen, 6500K of four feet long into existing T8 conventional fluorescent tube light fitting after changing the necessary electric connections as required at site complete all as directed. Make : Havells / Philips / Crompton.

S&F in repair LED PL- L 18W 4 Pin 5000-6500K color teperature complete all as specified and directed. Make: Philips/Havells/Khaitan or equivalent.

S&F in replacement of recesses mounted 2'x2' LED ceiling light fitting 36 Watt, 6500K, comprises of CRCA housing, high efficiency diffuser cover, electronic driver, etc and all accessories pre-wired including connecting up complete ass as directed. Make : Philips, Cat No : RC360B LED 36S-4000/6500 VIL60W60PSUOD or equivalent in Crompton/Havells.

S&F in replacement of integrated LED bulk head fitting 10 Watt LED lamp, 6500K with IP 66 and IK 09 impact resistance protection comprises of high pressure die cast aluminium housing, polycarbonate cover etc complete all as directed. Make: Philips Cat No : WT202W LED10S CW PSU S2 PC or equivalent in Havells/Crompton

S&F in replacement of double side connection LED T8 tube rod 20 Watt with PC body and diffuser, >2000 lumen, 6500K of four feet long into existing T8 conventional fluorescent tube light fitting after changing the necessary electric connections as required at site complete all as specified and directed.Make : Havells / Philips / Crompton.

S&F in replacement LED LAMP 9/10 W B22 WW/CDL,3 star rating .including taking down / dismantling the old items complete all as specified and directed. Make: Havells /SURYA/Crompton/Philips.

S&F in replacement LED LAMP 12/15 W B22 WW/CDL,3 star rating including taking down / dismantling the old items complete all as specified and directed.. Make: Havells /SURYA/Crompton/Philips.

S&F in replacement LED LAMP 18/20 W B22 WW/CDL,3 star rating including taking down / dismantling the old items complete all as specified and directed.. Make: Havells /SURYA/Crompton/Philips.

S&F LED post top lantern fitting for 360 degree indirect light 35W IP 65 protection complete protection with die cast aluminum housing with heat resistant toughened glass, with LED tube light fixtures driver,holders, connector etc. Complete with all accessories,prewired and including connecting up with three core flexible copper conductor cable with suitable size including taking down / dismantling the old items complete all as specified and directed. Make: Bajaj/Philips/Crompton .

S&F in replacement of sheet metal enclosure distribution board, single pole and neutral, AC, 240 volt, 4 way, with 200 Amp rated copper bus bar and metal door with IP - 43 & IK 09 protection and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing including taking down / dismantling the old items complete all as specified and directed.

S&F in replacement of sheet metal enclosure distribution board, single pole and neutral, AC, 240 volt, 08 way, with 200 Amp rated copper bus bar and metal door with IP - 43 & IK 09 protection and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing including taking down / dismantling the old items complete all as specified and directed.

S&F in replacement of sheet metal enclosure distribution board, single pole and neutral, AC, 240 volt, 12 way, with 200 Amp rated copper bus bar and metal door with IP - 43 & IK 09 protection and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing including taking down / dismantling the old items complete all as specified and directed.

S&F in replacement of MCB, TPN, AC, 415 volt of 63 Amp capacity "C" curve, 10 KA breaking capacity and making connections by using suitable copper lugs including taking down / dismantling the old items complete all as specified and directed.

S&F in replacement of MCB, TPN, AC, 240 volt of 32 Amp capacity "C" curve, 10 KA breaking capacity and making connections by using suitable copper lugs including taking down / dismantling the old items complete all as specified and directed.

S&F in replacement of MCB, DP, AC, 240 volt of 40 Amp capacity "C" curve, 10 KA breaking capacity and making connections by using suitable copper lugs including taking down / dismantling the old items complete all as specified and directed.

S&F in replacement of MCB, SP, AC, 240 volt of 6 to 40 Amp capacity as ordered "B" curve, 10 KA breaking capacity and making connections by using suitable copper lugs including taking down / dismantling the old items complete all as specified and directed.

S&F in replacement of MCB, SP, AC, 240 volt of 6 to 40 Amp capacity as ordered "C" curve, 10 KA breaking capacity and making connections by using suitable copper lugs including taking down / dismantling the old items complete all as specified and directed.

M&L for sub main wiring with 10 Sq mm nominal cross sectional area, two single core, 1100 Volt grade, multi-stranded, PVC insulated, ISI marked, unsheathed, FRLS copper conductor cable with and including continuous earth wire of size 10 Sq mm nominal cross sectional area, single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 25 mm dia, medium grade, ISI marked complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and making good to the disturbed surfaces to match the existing including taking out the unserviceable sub main wiring complete all as specified & directed.

M&L for sub main wiring with 6 Sq mm nominal cross sectional area, two single core, 1100 Volt grade, multi-stranded, PVC insulated, ISI marked, unsheathed, FRLS copper conductor cable with and including continuous earth wire of size 6 Sq mm nominal cross sectional area, single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 25 mm dia, medium grade, ISI marked complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and making good to the disturbed surfaces to match the existing including taking out the unserviceable sub main wiring complete all as specified & directed.

M&L for sub main wiring with 4 Sq mm nominal cross sectional area, two single core, 1100 Volt grade, multi-stranded, PVC insulated, ISI marked, unsheathed, FRLS copper conductor cable with and including continuous earth wire of size 4 Sq mm nominal cross sectional area, single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 25 mm dia, medium grade, ISI marked complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and making good to the disturbed surfaces to match the existing including taking out the unserviceable sub main wiring complete all as specified & directed.

M&L for earthing complete with galvanised mild steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried vertically in ground (earth pit not less than 2.25 metre deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level steel earth plate connected with GI wire 04 mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15 mm bore light grade all as shown in elect plate No 3 on serial page No 497 of SSR part I - 2009 and connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150 mm thick around GI earth plate, GI pipe medium grade 20 mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover 40 mm thick in PCC 1:2:4 type B1 duly reinforced with MS Bars 6 mm dia at the rate of 75 mm centre to centre both way with 12 mm dia lifting handle and pit / chamber in PCC 1:3:6 type C1, Angle iron 40 mm x 40 mm x 3 mm frame for pit cover including testing on completion complete all as specified and directed.

M&L in repair of earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthling etc. as required 4mm dia galvanised iron or steel wire including taking down / dismantling the old items complete all as specified and directed.

S&F terminal junction box with including nut bolts with iron clamp out door dust and vermin proof fabricate with 1.6 mm thick MS sheet encloser 200X 250X150 mm including neutral link and 4 nos 230 volts 63 amps bus bar for house connection with 2X10 SQ mm copper conductor multi standard and connecting insulator including two coats of synthetic enamel paint over a coat of metal primer including taking down / dismantling the old items complete all as specified and directed.

Taking down Ceiling fan/Exhaust fan any size any make, sealing cable ends, dismantling blades in case of ceiling fan and removing fan and blades to E/M store and refixing after necessary repairs and connecting up all as directed.

Repair and overhauling of Ceiling fan/ Exhaust fan/ Cabin fan/ Wall mounting fan/ Table fan/ Pedastal fan of any size by oiling/ greasing and reassembling the fan with new split pin, check nut, locking nut, washer, holder clip & connector. Testing and refixing of same fan shall be made to the entire satisfaction of Engineer-in-charge. Note: Repair work will be carried out at MES workshop/at site/ Users Residence as directed. Material required (Ball bearing and Condenser) for replacement of items will be measured and paid separately.

M&L replacement of ball bearing of size 6201/6202/6203 or as required all as specified Make - NBC/TATA/SKF

S&F Capacitor 2.5 mFd, ISI mark for ceiling fan of any size and exhaust fan of size 300/450mm cabin fan Sweep all as directed. Make: Havells/Epcos

Rewinding of Ceiling fans of 1200 mm sweep comprising of followings: a) Rewinding of stator with supper enameled copper wire (gauge of wire shall be same as provided by the manufacturer) including varnishing the new winding wire with quick dry varnish properly. b) Replacement of defective worn out bush where required, (ball bearing, capacitor will be measured and paid separately). c) Oiling/greasing and reassembling the fans with new split pin, check nut, locking bolt, washer, holder clip and connector including providing new ISI mark three core flexible copper wire of size 1.5sqmm of 1 Mtr length. d) Testing of repaired fan shall be carried out in the yard of SDO (MES) BBK to the entire satisfaction of the Engr-in-Charge. For ceiling fan of 1200 mm Sweep

All as per item No. 94 above but for exhaust fan 450 mm (18") Sweep

All as per item No. 94 above but for exhaust fan 300 mm (12") Sweep or Cabin Fan 450 mm sweep

All as per item No. 94 above but for cabin/wall fan 450 mm Sweep

S&F in replacement blade set (set of three) for any type/make of ceiling fan 1200 mm Sweep complete all as specified and directed.

S&F in replacement Blade Set with frame & four legs of fan with coupling for 300 mm (12") sweep exhaust fan complete all as specified and directed.

S&F in replacement Blade Set with frame & four legs of fan with coupling for 450 mm (18") sweep exhaust fan complete all as specified and directed.

S&F in replacement louvers for 300 mm sweep exhaust fan complete all as specified and directed.

S&F in replacement louvers for 450 mm sweep exhaust fan complete all as specified and directed.

S&F in replacement three core ISI mark copper lead wire of size 1.5 sqmm complete all as specified and directed. Make - Seiko/Paragon/Finolex/Havells/Anchor.

M&L for replacement of unserviceable hanging clamp for ceiling fan of any type complete with rubber reel, split pin, bolts, nut and washer all as specified and directed.

S&F in replacement hook for hanging ceiling fans and similar small articles confirming to Fe-290 Gde-E-165 complete all as specifed and directed.

S&F in replacement anchor fasteners having 12mm dia hook bolt for hanging ceiling fans or similar items complete all as specifed and directed.

M&L for spray painting of fan with one coat of super enamel white paint (Berger/Asian/Nerolac) after cleaning of body and blades, down rods, with detergent powder and writing MES Nos with black paint at given site under SDO (MES) Barabanki area as directed (Note:- The work shall be carried out at site)

M&L for replacement of worn out/defective roter shaft of ceiling fan, exhaust, fan, cabin fan of any make and size as directed

Taking down the Geyser of any make and size horizontal or vertical from Site for repairs/overhauling/replacement of unserviceable parts (Repairs/replacement of parts Shall be measured and paid separately) including replacement of old nuts and bolts with washers heavy duty including disconnection of electric supply, water supply lines and refixing the the Geyser in the serviceable condition after assembling, testing and reconnecting the electric/ water supply line all as specified and directed by Engr-In-Charge. Note:- Replacement of unserviceable parts of old Geyser shall be measured and paid separately under respective item here in after except bolt, nuts and washers.

S&F in replacement of heating element 2.0 KW of Geyser (ISI marked) for any make and type complete all as specified and directed.

S&F in replacement of heating element 1.5 KW of Geyser (ISI marked) for any make and type complete all as specified and directed.

S&F in replacement thermostat (ISI Marked) suitable for any type, make and capacity of geyser complete all as specified and directed.

S&F in replacement of unserviceable indicating lamps red and green colour for Geysers any make complete all as specified and directed.

Supply and replacement of unserviceable door assembly ISI marked comprising of inlet and outlet thermostate, housing with gasket complete with bolts, nuts, washers, screws of packing suitable for any type and make of geyser complete all as specified and directed.

M&L for repairng of leakage of inner copper/steel tank of any type /capacity and make of Geyser by brazing complete including necessary denting, machinery charges etc complete all as specified and directed.

S&F in repair stainless steel inner tank 25 Ltrs capacity, ISI mark of as per existing gauge for Geysers of any make as approved complete all as specified and directed.

S&F in replacement of brass Safety valve heavy duty ISI marked for any type and make of Geyser suitable for 15 mm bore of pipe complete all as specified and directed.

S&F 450mm PVC pipe connection hot series with both side nut with rubber washer suitable for any capacity Geyser of make Jaguar/Havells including taking down / dismantling the old items complete all as specified and directed.

S&F 600mm PVC pipe connection hot series with both side nut with rubber washer suitable for any capacity Geyser of make Jaguar/Havells including taking down / dismantling the old items complete all as specified and directed.

M&L for development of tube well by V-notch method or any other approved method at the site with air compressor of capacity 250PSI/1000 Cum and related accessories at least 60 hours till water discharge is free from sand and potable water and to achieve maximum discharege capacity of Max LPH including carryout yield test with suitable pump for three consecutive days of uninterrupted 8 hours per day durations (for minimum discharge capacity of 2000 LPH) after necessary development complete all as specified and directed. Note: (i) Unit rate quoted under this iyems shall deemed to be inclusive of transportation of tools and equipments as required to the site of work and removing the same after completion of work. (ii) Vertically test of the tube well structure shall be carried out and the cost of the same shall be deemed to be included in unit quoted rate)

M&L for taking out of submersible pumpset capacity 25 HP from bore well/shallow well for repair and replacement of unserviceable column pipes approx 80 to 100 mtrs using chain pully block manually and transportation of submersible pump and motor assy for necessary repair ement of wornout parts like bearing impeller bushing coupling etc and incl refixing the existing serviceable components after proper cleaning , machining as required ,assembling testing at workshop , carrying out painting by complete all as specified & directed. Note:- All new parts / spares /re- winding/ compenent will be measured and paid seperately under respective items

M&L for complete overhauling of submersible pumpset of capacity 25 HP by replacement of bearings,stainer,applying quick drying warnish to starter winding,cleaning of mineral deposition and refixing Part by part by using tools and tackles and necessary GI specials,bolts nuts,as required at site, carrying out painting with 2 coat of synthetic enamelled paint over a coat of primer, refixing the existing serviceable components after proper cleaning , machining as required ,assembling testing at workshop complete all as specified & directed. Note:- (i) All new parts spares /compenent will be measured and paid seperately under respective items (ii) Replacement of bolts /nuts.washers is deemed to be included in the items.

Replacement of brass impeller of 25 HP submercible pump

Replacement of Stage casing bearing of 25 HP submercible pump

Replacement of Shaft sleeve bush for 25 HP submercible pump

Replacement of Suction Gun metal bush for 25 HP submercible pump

Replacement of Thrust bearing complete for 25 HP submercible pump

Replacement of Pump shaft key for each stage submercible pump

M&L for rewinding of 25 HP submersible pump set motor coil with water ressistant super enameled quality copper winding wire as per existing gauge and providing insulation materials ,varnishing etc after cutting, removing burnt out / leakage damaged coils & reassembling the motor complete as reqd complete all as specified & directed.

S&F in repair seamless column pipe heavy duty of 80 mm bore with thickness not less than 6 mm , 8 TPI thread of 10 ft long each pipe with both end thread /flanged inbcluding joints complete all as specified & directed Make :- TATA/Bansal/Jindal/Zenith

Supply and lay in replacement Flat submersible cable PVC insulated weather / water proof with flexible copper conductor 1100 V grade 10 SQ mm 3 core into the bore well along with the submersible pump set from the starter complete all as specified & directed

M&L for Transportation of submerssible pump set 25 HP from Pump House to workshop and back to Pump House after repair lowering the pumpset along column pipe submersible cable using chain pully block manually and connectong with the existing rasing main all electrical connection, testing complete all as specified & directed

S&F in the repalcement motor star delta starter 3 phase 415 V with enclosure fully automatic for 25 HP motor complete all as specified & directed

M&L for replacement 25 HP submersible pump set ,415 V TP suitable for 100/150 mm dia bore with 4 stage Brass impeller pump set as a spare being remote area complete specified & directed

M&L for cement concrete type C2 1:3:6 (40 mm graded aggregate) for making good to disturbed surface of road etc. all as specified and as directed.

S&F in repair DOL starter conforming to IS 19947-4 suitable for Doser pump set 0.5 HP complete testing and commissioning including taking down / dismantling the old items complete all as specified and directed.. Make : Siemens/L&T/ABB

Repairs & cleaning of valve chamber of size 500X500X500 mm by descaling accumulated water and removing all sludge, vegetables and carry out all masonry work like plastering, PCC flooring and applying two coat of white wash on inner and outer surfaces and applying two coats of synthetic enamel paint over a coat of metal primer on metallic opening door, sluice valve and pipeline including necessary welding work to repair door, hinges,complete all as specified & directed.

All as per item No. 137 above but valve chamber of size 750x750x750mm.

M&L for construction of valve chamber of size 1000X1000X1000 mm (internal dimension) with PCC 1:4:8 for foundation 150 mm thick , brick work built with CM 1:6 , PCC 1:3:6 coping 50 mm , plastering 15 mm thick in CM 1:6 to all internal and exposed surfaces including excavation ,earth work in hard / dense soil , MS sheet cover 4 mm thick and with MS angle iron 50 mm x 50 mm x 6 mm as per existing size with locking arrangement embedded in PCC suitable for 25/40/50 mm gate valves and painting the MS cover with two coats of synthetic enamel paint over one coat of red oxide / metal primer on metallic sheet, hinges etc complete all as specified & directed.

M&L for construction of valve chamber of size 750X750X750 mm (internal dimension) with PCC 1:4:8 for foundation 150 mm thick , brick work built with CM 1:6 , PCC 1:3:6 coping 50 mm , plastering 15 mm thick in CM 1:6 to all internal and exposed surfaces including excavation ,earth work in hard / dense soil , MS sheet cover 4 mm thick and with MS angle iron 50 mm x 50 mm x 6 mm as per existing size with locking arrangement embedded in PCC suitable for 25/40/50 mm gate valves and painting the MS cover with two coats of synthetic enamel paint over one coat of red oxide / metal primer on metallic sheet, hinges etc complete all as specified & directed.

M&L for construction of valve chamber of size 500X500X500 mm (internal dimension) with PCC 1:4:8 for foundation 150 mm thick , brick work built with CM 1:6 , PCC 1:3:6 coping 50 mm , plastering 15 mm thick in CM 1:6 to all internal and exposed surfaces including excavation ,earth work in hard / dense soil , MS sheet cover 4 mm thick and with MS angle iron 50 mm x 50 mm x 6 mm as per existing size with locking arrangement embedded in PCC suitable for 25/40/50 mm gate valves and painting the MS cover with two coats of synthetic enamel paint over one coat of red oxide / metal primer on metallic sheet, hinges etc complete all as specified & directed.

M&L for fabrication for repair & servicing of sluice valve of size 150 mm bore by replacement of stainless steel /Brass spindle /gun metal spindle ,checknut , Gland rope, side nobe lock nuts etc (Note Brass spindle shall be fabricated from solid round bar having did not less than dia of the largest section of the spindle by maching / lathe work), and refixing in the position,complete, all as specified and directed.

M&L for fabrication for repair & servicing of sluice valve of size 100 mm bore by replacement of stainless steel /Brass spindle /gun metal spindle ,checknut , Gland rope, side nobe lock nuts etc (Note Brass spindle shall be fabricated from solid round bar having not less than dia of the largest section of the spindle by maching / lathe work), and refixing in the position,complete, all as specified and directed.

M&L for fabrication for repair & servicing of sluice valve of size 80mm bore by replacement of stainless steel /Brass spindle /gun metal spindle ,checknut , Gland rope, side nobe lock nuts etc (Note Brass spindle shall be fabricated from solid round bar having not less than dia of the largest section of the spindle by maching / lathe work), and refixing in the position,complete, all as specified and directed.

S&F sluice valve, cast iron body, ISI marked and iron wheel head, flanged, class PN-1.6, IS: 14846-2000 including jointing material, rubber gasket, nuts, bolts, etc complete of 150mm bore . Make : Kirloskar/L&T/BIR.including taking down / dismantling the old items complete all as specified and directed.

S&F sluice valve, cast iron body, ISI marked and iron wheel head, flanged, class PN-1.6, IS: 14846-2000 including jointing material, rubber gasket, nuts, bolts, etc complete of 100 mm bore . Make : Kirloskar/L&T/BIR including taking down / dismantling the old items complete all as specified and directed.

S&F sluice valve, cast iron body, ISI marked and iron wheel head, flanged, class PN-1.6, IS: 14846-2000 including jointing material, rubber gasket, nuts, bolts, etc complete of 80 mm bore . Make : Kirloskar/L&T/BIR including taking down / dismantling the old items complete all as specified and directed.

S&F in repair Non return valve of CI flanged end, class-I, ISI marked with rubber packing, nuts & bolts etc complete of 100 mm bore . Make: Kirloskar/L&T/BIR.including taking down / dismantling the old items complete all as specified and directed.

M&L for Service and repair of Chlorine Dosing Pump alongwith connected items complete all as specified and directed. Note: All itmes required for Service will be measure and paid separately.

S&F in repair complete head assembley for chlorine dosing pump alongwith PVC adaptor of 1/2" Bore, PVC NRV with glass Ball for both suction and outlet of head complete all as specified and directed.

S&F in repair solid PVC NRV of 1/2" Bore connection for outlet of Chlorine Dosing Pump complete all as specified and directed.

S&F in repair PVC adaptor of 3/4" Bore for connecting outlet/inlet of Chlorine Dosing Pump complete all as specified and directed.

Repair/Maint and identifying the defects in water cooler and provide with parts and connected accessories as per the site requirement to make functional icluding testing complete all as specified and directed. (note all as specified .Note All new parts spares /compenent will be measured and paid seperately under respective items (ii) Replacement of bolts /nuts.washers is deemed to be included in the items. Water cooler 150/80, 80/40 ltrs

All as per item No 153 above but Refrigerator 310 lts,190 ltrs.

All as per item No 153 above but Deep freezer 200 ltrs.

Taking out the unserviceable compressor (Sealed unit) from water cooler 150 liters capacity of any make and type and repalacement of new compressor obtained from the factory out let make Kirloskar/Tecumseh/Whirlpool, model ACJ 513, AW 1000, including suitable relay, over load and starting/running capacitor flushing out the old burnt condensafe from the gas system by vacuumisation, cleaning the system by CTC solution , pressure testing of the system, gas charging with R-134a/22 gas upto the desired pressure, testing & commissioning the water cooler complete all as specified and directed.

Material and labour for flushing out the condensate from the gas system of water cooler of capacity 40/80, 60/120,150/150 litres, injecting CTC for demoisturing the system , pressure testing and gas charging with R-134a gas upto the desired pressure complete all as specified and directed.

S&F in replacement chromium plated brass taps push button type, 15mm dia for water cooler of any capacity suitable for Usha/Blue Star water coolers complete all as specified and directed.

S&F in replacement of blower fan motor 1/10 HP suitable for water cooler, single phase 230 Volts including mounting ring/washer complete all as specified and directed.

S&F in replacement starting capacitor of 100/45 mfd complete all as specified and directed.

S&F in replacement running capacitor of 15/10 mfd complete all as specified and directed.

S&F in replacement thermostat for water cooler complete all as specified and directed.

S&F in replacement relay for water cooler complete all as specified and directed.

S&F replacement drain hose pipe not less than 1.5 metre length and 30/40mm dia complete with clamping arrangment complete all as specified and directed.

Taking out the unserviceable compressor (Sealed unit) from refrigerator 310/ 190 liters capacity of any make and type and repalacement of new compressor obtained from the factory out let make Kirloskar/Tecumseh/Whirlpool, model ACJ 513, AW 1000, including suitable relay, over load and starting/running capacitor flushing out the old burnt condensafe from the gas system by vacuumisation, cleaning the system by CTC solution , pressure testing of the system, gas charging with R-134a/22 gas upto the desired pressure, testing & commissioning the water cooler complete all as specified and directed.

Material and labour for flushing out the condensate from the gas system of refrigerator 310/ 190 liters capacity injecting CTC for demoisturing the system , pressure testing and gas charging with R-134a gas upto the desired pressure complete all as specified and directed.

S&F in replacement starting capacitor of 80/40 mfd complete all as specified and directed.

S&F in replacement running capacitor of 10/5 mfd complete all as specified and directed.

S&F in replacement thermostate for refrigerator complete all as specified and directed.

S&F in replacement relay for refrigerator complete all as specified and directed.

S&F in replacement vegetable tray for refrigerator 310/190 ltrs complete all as specified and directed.

Taking out the unserviceable compressor (Sealed unit) from Deep freezer 200 ltrs capacity of any make and type and repalacement of new compressor obtained from the factory out let make Kirloskar/Tecumseh/Whirlpool, model ACJ 513, AW 1000, including suitable relay, over load and starting/running capacitor flushing out the old burnt condensafe from the gas system by vacuumisation, cleaning the system by CTC solution , pressure testing of the system, gas charging with R-134a/22 gas upto the desired pressure, testing & commissioning the water cooler complete all as specified and directed.

Material and labour for flushing out the condensate from the gas system of Deep freezer 200 ltrs capacity injecting CTC for demoisturing the system , pressure testing and gas charging with R-134a gas upto the desired pressure complete all as specified and directed.

S&F in replacement of blower fan motor 1/10 HP suitable for Deep freezer 200 ltrs, single phase 230 Volts including mounting ring/washer complete all as specified and directed.

S&F in replacement starting capacitor of 80/120 mfd complete all as specified and directed.

S&F in replacement running capacitor of 15/5 mfd complete all as specified and directed.

S&F in replacement thermostate for Deepfreezer complete all as specified and directed.

S&F in replacement relay for Deep freezer complete all as specified and directed.

S&F in replacement for pressure gauge 4" dia of 0-14 Kgs rating complete all as specified and directed all as specified and directed.

Supply only high stength Calcium based granular containing apprppirate Quantities of chlorinations dipensiates/corrosion inhibitors to prevent encrustation /Scaling in distribution system in 45/50 Kgs packing of approved and tested from Govt lab or equivalent testing authority (not more than two months of packing) complete all as specified and directed. Make: Adaani wilmar model PURICHLOR / Aquafit or apprved by GE.

Supply only Sodium Hypochlorite solution grade 1 containing apprppirate Quantities of chlorinations dipensiates/corrosion inhibitors to prevent encrustation /Scaling in distribution system of approved and tested from Govt lab or equivalent testing authority (not more than two months of packing ) (chlorine concentration 10% or more) for treatment of drinking water complete all as specified and directed.

S&F fittings for flanged pipes upto 150 mm bores like Bends, Tapers, Tee pieces (single & double branch) any type and angle/radius and straight connecting pieces but all ends flanged, bolts,nuts and washers of any size as per site requirement etc including taking down / dismantling the old items complete all as specified and directed.

M&L for taking up existing 80 mm GI and laying for GI pipe medium grade, with all fittings, laid in trenches or on walls of size 80 mm bore, complete, all as specified and directed . Make: Jindal/Tata/Prakash /Surya (Note :- Excavation & Earth work shall be measured and paid separately under the respective items.)

All as per item No. 183 above but 100mm bore pipe.

Draining out water from over head reservoir of 50000 Gln capacity , removing sludge deposited, scales and other impurities from inside the tank thoroughly by scrapping with wire brushes, broom stick to make the surfaces free from sludge deposit and impurities, cleaning & washing the surfaces with bleaching powder solution including rewashing with fresh water and writing letters /figures like “Tank cleaned on________(date) and Due date_____ boldly & prominently with thick synthetic enamel with height & width of letters/figures 15cm & 10cm respectively in prominent places of tank ,white washing inside the tank etc all complete all as specified and as directed.

M&L for writing letters or figures not exc 30 cm height in block Roman, Italian or iNdian letters including stops, comma, arrows, brackets, dashes etc on walls, sign boards (black or yellow or as required base) including two coats of oil paint over a coat of white base synthetic enamel paint complete all as specified and directed.

S&F in replacement digital Chloroscope for testing free chlorine in water sample (DPD method) alongwith chemical test kit to perform appx 25 tests complete all as specified and directed. Make: Hanna Instruments or approved by GE.

Test and submit the test report of samples of portable water for Chemical/Biological test report for the samples of portable water in the directed location from Engineer in charge and submit the Chemical/Biological test report from the reputed state / Central government water test lab and producing test reports to engineer incharge when ever directed complete all as specified and directed.

S&F in replacement Metal rotary hand operated barrel and oil drum pump having 40 inch lengt or more and 1 inch dia suction pipe, flow rate upto 10 gallons per minute, metallic impeller suitable for disensing diesel, kerosene etc complete all as specified and directed.

S&F in replacement ABC powder type 6kg Fire Extinguisher (red), ISI marked, fully refillable with L mounting alongwith wall bracket complete all as specified and directed.

S&F in replacement ABC powder type 2kg Fire Extinguisher (red), ISI marked, fully refillable with L mounting alongwith wall bracket complete all as specified and directed.

S&F in replacement 9 L capacity fire bucket, painted red, round bottom, having word fire stencilled on them all complete all as specified and directed.

S&F in replacement pressure booster pump having capacity 1 hp, alongwith connected plumbing items as required on site, pressure tank and pressure controller for constant water pressure complete all as specified and directed.

Taking down the old U/S steel LT/HT poles of any height ,struts including Demolition of cement concrete,GI structure supports, stay assemlies, junction box complete all as specified and directed.

Supply, fixing and erecting Hot Dip galvanised octagonal pole in proper position 9.0 Mtr height top A/F 70mm bottom A/F 155mm,single section-3mm shaft thickness, baseplate 260x260x16mm Pcd 260mm including foundtation with foundtaion bolds L- type M25x750mm {threaded part in galvanized finished and remaining part in Red Oxide} and single Arm Bracket 1mtr long straight type [Arm Pipe Size -40NB Medium Class as per IS: 1161] complete all as specified and directed by Engineer-in-charge. Make:polmax or equalent. Note: (i) Excavation , earth work and PCC shall be included in the unit rate quoted by the contractor.

Supply, fixing and erecting in proper position 9.0 Mtr steel tubular swaged poles complete with cast iron base plate, final taper plug, bolts, nuts and screws as specified type 410 SP-31 (9.0 metres long) .Note: (i) Excavation ,earth work and PCC shall be measured and paid separately.(ii) Painting will be measured and paid seperately under relevent item.

S&F bracket for street light fitting made out of 40 mm dia light grade GI tubing bent to required shape 1.5 m long including necessary GI clamps, nuts bolts and washers and connecting with thee core flexible wire of 1.5 sq mm copper conductor to the pole junction box including taking down / dismantling the old items complete all as specified and directed.

S&F PVC/SMC weather proof, hinged door, junction box, size 300mm x 200mm x 100mm with 30A Aluminium bus bar 04 Nos, 240V, Neutral link and 1No MCB SP of 06 Amps, alongwith necessary fixing arrangement such as clamps, nut, bolts, etc including taking down / dismantling the old items complete all as specified and directed.

S&F time switch astronomical type suitable with rising/setting of the sun with IP 20 protection, AC, 230 volts, one channel, two module and making connections by using suitable copper lugs complete all as specified & directed. Make: Legrand, Cat No : 4126 54/HAGER/SCHNIDER

Material and labour for Cleaning and preparation for painting surface of street light steel tubular pole 9mtr long and painting with two coat of aluminum paint including brackets including applying two coats of cement base paint to coping,strip painting up to 1mtr from coping with blue and white colour paint of strips , writing Pole No complete all as specified and directed.

Taking down the old serrviceable street light fittings, complete all as specified and directed.

Refixing the old serviceable street light along with fitting removed from above item complete all as specified and ditrected .

Refixing after repair including replacement of suitable LED driver 40 watts and make serviceable complete all as specified and ditrected .

Refixing after repair including replacement of suitable LED driver 90 watts and make serviceable complete all as specified and ditrected .

S&F in replacement PVC insulated sheathed Round cable with stranded copper conductor of size 2.5 sqmm 3 core including taking down / dismantling the old items complete all as specified and directed. Make Finoles/Plaza/Havells

S&F in replacement street light fitting Pressure die cast aluminium housing (LM6 Alloy), Minium 9000-10000 Lumens with maximum system wattage 90 W-100 W, with PMMA lenses,External built proper heat shinks and toughtened glass/PC ensuring IP66 & IK>05 protection, LED used shall be SMD type and fixture should have minium efficiency at system level (Not chip level) 100 Lumens/Watt, Life of system should 50000 Hrs all including necessary wire for fitting light to pole all as specified and directed by Engr-in- Charge.Make: Philips Cat Part No BRP410 LED 094 CW HE MR FG S2 PSU GR, CG Cat Part No LSTN-100-CDL-A or equivalent in Havells.

S&F in replacement of LED security light fitting 40 watt, 4000 lumen, 5700K with IP 66 protection comprises of a pressure die cast aluminium housing, heat resistance toughened glass, LED lenses, surge protector, electronic driver, etc and all accessories pre-wired including suitable mounting arrangement complete all as specified and directed.Make:- Havells/ Philips/ Wipro or equivalent.

S&F in replacement of sheet metal enclosure distribution board, vertical Tripple pole and neutral, AC, 415 volt, 04 way, bus bar and metal door with IP - 43 & IK 09 protection and flush to wall, as MCCB as in comming , and MCBs are out going ,(Measured under relevent items of schedule ) including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified & directed.

S&F in replacement of sheet metal enclosure distribution board, vertical Tripple pole and neutral, AC, 415 volt, 06 way, bus bar and metal door with IP - 43 & IK 09 protection and flush to wall, as MCCB as in comming , and MCBs are out going ,(Measured under relevent items of schedule ) including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified & directed.

S&F in replacement of MCCB, 3 pole, AC, 440 volts 160 Amps , 36 KA adjustable type complete all as specified and directed.

S&F in replacement of MCCB, 3 pole, AC, 440 volts 200 Amps , 36 KA adjustable type complete all as specified and directed.

R K CONTRACTOR AND SUPPLIERS

EVEREST CONSTRUCTION

KUMAR ENTERPRISES

M/S S.B. Singh and Sons

M K Engineers and Contractors

M/s Reliable Electromech Systems

Sanjay Traders