SPL REPAIR TO BLDG NO T-1 T-2 T-3 T-4 T-8 T-9 T-11 AND NP-2 MT SHED, BMP SHED AND GUN SHED OF MED REGT AT OLD AMRITSAR CANTT

Dismantling of plain of corrugated steel sheeting any gauge, thickness including Nainital or similar pattern roof covering complete all as specified and directed.

Supply & Fixing pre-painted galvalume aluminium zinc coating GI based semi corrugated steel sheet 0.50 mm thick of colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall , fixed with self tapping screws complete all as specified and directed.

Supply & Fixing pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall and vally gutter, fixed with self tapping screws complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Supply & Fixing Mild steel angle Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates etc. Fe290 Gde E-165,complete all as specified directed.

Material and Labour for preparation of newly steel surface of any description not other wise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Material and Labour for preparation of old painted steel surface of any description not other wise described, over 10cm width or girth and applying one coat of synthetic enamel paint. complete all as specified and directed.

Taking down cement plaster on brick or concrete walls, ceiling etc, including racking out joints , hacking for key, scrubbing down with water etc complete all as specified and directed.

Material and Labour for rendering 12mm thick cement plaster in cement mortar (1:6) on brick or concrete surfaces of walls etc., finished even and smooth without extra cement complete all as specified and directed.

Material and Labour for 15 mm thick rendering in cement mortar 1:4 mixed with water proofing compound @ of 3% on brick or concrete surface of walls etc. finished surface even and fair without using extra cement complete all as specified and directed. Note : Supply only water proofing liquid shall be measured and paid separately.