PROVN OF PATIENTS REGISTRATION CUM WAITING AREA WITH CABIN PARTITION WITH FALSE CEILING AT MH AT OLD AMRITSAR CANTT

Amount

Material and labour for surface dressing n exc 15 cm deep in soft/loose soil complete all as specified and directed.

Excavation in trenches in soft/loose soil not exceeding 1.5 meters wide and not exceeding 1.5 meter depth for foundation for LT cables complete all as specified and as directed.

M & L for PCC 1:4:8 type D2 (using 40mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and directed.

M&L RCC M 25 (Design Mix) Using 20mm graded stone aggregate as in column, footings, plinth beams complete all as specified and directed.

M&L RCC M 25 (Design Mix) Using 20mm graded stone aggregate as in columns complete all as specified and directed.

M&L RCC M 25 (Design Mix) Using 20mm graded stone aggregate as in beams complete all as specified and directed.

M&L RCC M 25 (Design Mix) Using 20mm graded stone aggregate as in Chhajja complete all as specified and directed.

M&L RCC M 25 (Design Mix) Using 20mm graded stone aggregate as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

Material and labour for mild steel TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and directed.

Material and labour for mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Material and labour for formwork to sides of fair finished flat surfaces of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed.

Material and labour for fair finished Square, rectangular or polygonal Form work to sides of pillars, posts, struts, columns and stanchions complete all as specified and directed.

Material and labour for fair finished flat Form work to sides and soffits of floor or roof beams, lintels, cantilevers, shelves including supports etc. complete all as specified and directed.

Material and labour for fair finished flat Form work to chhajja and similor work etc complete all as specified and directed.

Material and labour for fair finished flat form works to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.

M&L for brick work with sub class "B" bricks (old size) straight or curved on plan exc 6 m mean radius, built in CM 1:4 complete all as specified and directed

M&L for Rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 and finishing even and smooth without using extra cement complete all as specified and directed.

All as per Srl item No 17 above but in CM 1:6 complete all as specified and directed.

M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces on ceiling in CM 1:3 finishing even and smooth without using extra cement complete all as specified and directed

M&L for preperation of New plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer of average 2mm thick birla wall putty complete all as specified and directed by Engr in Charge .

M&L for applying two coats of whitewash on ceiling including preperation of newly plastered surfaces complete all as specified and directed.

M&L for preparation of new plastered surfaces and applying two coat of weather proof exterior paint over a coat of cement primer on wall surfaces complete all as specified.

S&F powder coated aluminium frame for doors ,windows, ventilators with one or more rebates including joining cleats for fixing complete all as specified and directed by Engineer-In-Charge.( Min. thickness of powder coating 50 micron)

S&F powder coated aluminium glazed shutter(for doors) Al-section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading. ( Min. thickness of powder coating 50 micron) complete all as specified and directed.

S&F Aluminium powder coated (of any colour) window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified .(Min. thickness of powder coating 50 micron) complete all as specified and directed.

S&F Sheet glass, 3mm thick ordinary quality, in squares,n exceeding 0.50 sqm in each pane including rubber packing and aluminium beading complete all as specified and directed.

S&F Sheet glass, 5.5mm thick ordinary quality, in squares,exceeding 0.50 sqm in each pane including rubber packing and aluminium beading complete all as specified and directed.

S&F 10mm thick PVC insulation panels with EPS stuck to 1mm printed PVC sheet suitably placed in aluminium door as per specification and drawing complete all as specified and directed.

S&F Floor door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring fixed to door shutter of size 140mm complete all as specified and directed.

S&F Stainless steel mortice lock, 4 levers, verticle type, size 100 mm, complete all as specified and directed.

S&F door closer hydraulically regulated, (Alminium die cast body) designation No. 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg and fixed complete all as specified and directed.

M & L for hardcore of gauge not exceeding 63 mm of broken stones or boulders, deposited, spread and levelled in layers not exceeding 15 cm thick watered and rammed to a true surface in broken boulder complete all as specified and as directed.

M&L for 75mm thick Cement concrete type C-2 , 1:3:6 (using 40 mm graded aggregate) as in sub base complete all as specified and directed.

M&L for Vitrified tiles,light shade 10mm thick (Square/ rectangular) polished, area of each tiles n.exc 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 20mm thick screed bed in CM 1:6 complete all as specified and directed.

All as per item No 34 but on vertical surfaces but on rendering 10mm thick in CM 1:4 complete all as specified and directed.

S&F built in steel cup board with pressed steel frame of size 75 mm x 45 mm x 1.25 mm thick with pressed steel shutter 0.81mm thick Godrej pattern fixed to masonry wall by hold fasts, made out of 25x3 mm flat iron including MS shelves incl spray painting with two coats of synthetic enamel paint over one coat of red oxide primer all around on steel surfaces of frame and shutter complete all as specified and directed.

M&L for fixing 12mm thick gypsum board suitably placed in false ceiling with aluminium anodised snap grid frame work size 605mmx605mm including hanging with GI wire 6 mm dia and adjusting level etc complete all as specified

M&L for 75mm thick PCC 1:3:6 type C-1 (using 40mm graded stone aggregate as in plinth protection Finishing fair and even complete all as specified and directed.

M&L for applying evenly a tack coat of industrial bitumen 85/25 grade @ 1.2 Kg/Sqm including cleaning surfaces etc complete all as specified and directed

S&F (minimum) 3mm thick APP film based poly meric membrance minimum weighing 3Kg per Sqm reinforced with polyester non wove fabric (weight not less than 150 gms/sqm) land on primed surface by forced application along the length of 100mm lapping strip to either sides and sealed in after cleaning down the roof by brooms complete all as specified and directed.

M&L for 40 mm thick brick tiles laid on 15mm thick cement mortar 1:6 and joints grouted flush in cement mortar ( 1:3) mixed with 5 % of crude oil by weight of cement complete all as specified and directed

Material and labour for cement concrete (1:2:4), type B-0 using 12.5mm graded stone aggregate as in benching, kerbs, mud stop, rounded or chamfered on edges including form work complete all as specified.

S&F 110mm bore PVC(SWR) pipes single socketed in any length fixed to walls with nut and bolt and clamps at every 2mtr length including) including all fittings complete all as specified and directed by Engineer-in-charge Make:-supreme,Finolex,Jyoti.

S&F 110mm bore PVC (SWR) bends any radius With access door complete all as specified and directed.

S&F rotational moulded polythene, triple layers, water storage tank 500 Ltr capacity, closed top, cylindrical, hoisted and fixed in position including S&F 20mm bore PTMT ball valve epoxy coated minium weight 210gms with aluminium rod complete all as specified and directed

S F , 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F Galvanised iron steel water tubing, 15mm bore, medium grade with all fittings and fixed to walls and ceilings or laid in floors complete all as specified.

S&F Galvanised iron steel water tubing, 20mm bore, medium grade with all fittings and fixed to walls and ceilings or laid in floors complete all as specified.

S&F of brass cromium brass plated fancy type bib taps 15 mm bore long nose screwed down screwed for iron pipe or for brass complete all as specified and directed

M&L 18 mm thick granite (of any type) (Table rubbed and polished ) in CM 1:4 incl pointing with white cement using marble dust of 1:2 with ad mixture of pigment to match with shade of granite over cement mortar plastering in CM 1:4 of 10mm thick etc complete all as specified and directed.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil.

M&L for 75mm thick Cement concrete type D-2 , 1:4:8 (using 40 mm graded aggregate) as in sub base complete all as specified and directed.

M&L for 25mm sand filling under/over floors or in foundations including watering and consolidation complete all as specified and directed.

M&L for Machine pressed pre-cast concrete interlocking paver block any shape and size conforming to IS 15658-2006 of 60 mm thickness M-35 grade with grey cement and pigment complete all as specified and directed.

M&L Providing, cement concrete Type B1, 1:2:4 (20 mm graded aggregate) in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed.

Supply and fixing of PPR gate valve (Brass insert) of size 20mm complete all as specified and directed.

M & L for laying of LT cable of 1100 volt XLPE insulated and PVC sheathed of size 35 sqmm 4 core with cable gland including taking down old unserviceble cable complete all as specified and directed by Engineer-in-Charge.

M & L for point wiring for One light point/Bell/Fan point controlled by one switch complete with 1.5 sqmm single core PVC insulated FRLS unsheathed cable 1100 volts grade, multistranded with copper conductors conforming to IS specifications, drawn through and including conceled conduit concealed/ fixed on wall / ceiling with suitable clamps, screws, etc or concealed in wall including terminal boxes fabricated with 1.6 mm MS sheet concealed in walls covered with plastic laminated sheet top cover 3 mm thick fixed with cadmium plated iron screws for housing the switches, switch sockets outlets, fan regulators, etc, including provn of 1.5 sqmm PVC insulated unsheathed cable with multistranded copper conductor as earth continuity conductor and connecting to common earth dolly all as specified and as directed.

All as per Srl item No. 58 here in before but One 3 pin 5 amps switch socket on independent board complete all as specified and directed.

All as per Srl item No. 58 here in before but One 3 pin 5 amps switch socket on same board complete all as specified and directed.

All as per Srl item No. 58 here in before but with cable 2.5 sqmm (nominal area) multistranded copper wire unsheathed for one 3 pin socket outlet 15 amps on independent board including continous earth wirte PVC insulated 1.5 sqmm copper multistranded conductor connecting to common earth and earth dolly complete all as specified and directed Note for items Nos 2&3 :- (a) The wiring shall be done in proper colour coding using red,yellow and blue for phase,black for neutral and green for earth leads complete all as specified and directed.

Supply and fix modular type switch one way 5 A, SP, 230 Volts complete all as specified and directed.

Supply and fix modular type Socket outlet 2 in 1, 3 pin 5 Amps modular type, type 2 module, 230V AC type complete all as specified and directed.

Supply and fix modular type Switch 2 in 1, 3 pin15 Amps modular type, type 2 module, 230V AC complete all as specified and directed.

Supply and fixing ceiling rose surface bakelite 3 terminals 65x32mm complete all as specified

M&L for road cutting including excavation and getting out ,returning filling in spreading and well ramming in layers soling with broker bolders and quarring stones,inter stices filling,7.5 cm thick (compacted thickness) WBM with coarse aggregate retrieved from road cutting consolidated to required gradient and camber including applying evenly a priming tack coat with bituminous primer and making surface even and getting out surplus soil complete all as specified and as directed.

S&F GI pipe 40mm bore medium grade for cable protection, fixed to poles, under road, along wall inculding necessary MS clamps complete all as specified and directed.

Supply and fix wall/ceing mounting LED 18 Watt PC Diffuser tube light fitting complet with all aceesories 1x18W LED suitable for domestic application 240Volts 50HZ including one tube rode and internally pre-wired with 1.5 sqmm twin twisted flexible copper conductor and complete of Make Jaguar or its equivalents make Havells , CG.or equivalant

M & L for sub main wiring with 1100 volt grade two single core PVC insulated and unsheathed cable with stranded copper conductor 4 sqmm drawn into and including electrical grade PVC conduit not less than 25 mm dia with IS 9537 (Part-III) 1983 mark, or relevant ISI mark with all accessories fixed concealed including chase cutting in brick/ stone masonry for fixing conduit and making good the disturb surfaces of wall as per existing including 2.5 sqmm multi - stranded copper conductor as earth wire in green colour complete all as specified and directed. Note:- Two run of cable 4 Sqmm and one run of 4 Sqmm earth wire including PVC conduit shall be measured as 'One Unit'.

M&L for sub main wiring consisting two single core PVC insulated cable with stranded copper conductor, size 6 Sqmm, copper earth wire 6 Sqmm, drawn in and including concealed non metalic PVC conduit, 2 mm thick, 25 mm dia (external) inclusive of MS junction / terminal boxes and all fittings and accessories including taking down old unservicable sub main wiring complete all as specified. Note:- Two run of cable 6 Sqmm and one run of 6 Sqmm earth wire including PVC conduit shall be measured as 'One Unit'.

Supply and fixing modular type socket outlet two-in-one, 3 pin each suitable for 5 and 15 Amperes flush type, 250 volts AC complete all as specified and directed.

S&F, in stepped modular type electronic fan regulator, 2 module, 100W, 230 volts, AC complete all as specified.

Returning filling in trenches including spreading leveling watering and well ramming in layers each not exceeding 25 cm in soft/loose soil complete all as specified

Removing surplus spoil to a distance not exceeding 50 meter and depositing where directed at a level not exceeding 1.5 meters above the starting point, complete all as specified.

M&L for Sand cushioning to UG cable 40cm wide 15cm and 10cm thick above and below the cable in trenches/ducts complete all as specified and directed by Engineer-in-Charge.

Supply and laying burnt brick sub class 'B' modular size, for cable protection laid length wise perpendicular to the axis of cable complete all as specified and directed.

Supply and fixing of 2 x 2 LED slim panel light 36 / 40 watt recessed mounted suitable for false ceiling mounting complete all as specified and as directed.

S & F MCB single pole, 240 volts, 6 to 32 Ampere, rupturing capacity 10 KA, ‘C’ curve type complete all as specified and directed. Make polycab havells or equivlant make

S & F MCB single pole, 240 volts, 40 to 63 Ampere, rupturing capacity 10 KA, ‘C’ curve type complete all as specified and directed. Make polycab havells or equivlant make

S & F MCB SPN, 240 volts, 40 to 63 Ampere, rupturing capacity 10 KA, ‘C’ curve type complete all as specified and directed. Make polycab havells or equivlant make

S&F MCCB Incomer distribution board double door vertical type made out of CRCA MS sheet surface with insulated material like polyester or with epoxy powder coating surface mounting TPN 4 way, 415 volts with copper bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCCB and IP 43 - IK 09 protection with and incl 100 amp 36 kA 4 pole MCCB with thermal - magnetic setting and Icu = Ics = 100% (Make of MCCB : Legrand Lexic DPX /Schinder Elect Compact CVS/L&T DU 100) complete all as specified. Make : Legrand Lexic (Cat Part 607790) / Hager (Cat Part No HVD04MGN) / Schneider Merlin Gerin Multi-9 (Cat Part No MGNV10CDD12). (Note : The cost of removing old wooden box and making good of surface as original by brick work, plastering, whitewash/colour/distemper etc is included in quated rate) complete all as specified and directed.

Supply and fixing Distribution Board, double door, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, surface mounting, SPN 12 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s and isolators etc and making all necessary connections including taking down old unservicable boards complete all as specified and directed.

Material and Labour for earthing complete with GI earth plate electrode 600mmx600mm, 6mm thick, burried in ground vertically to a depth not less than 2.25 meters below ground level with top edge of the earth plate to a depth not lesss than 1.5 meter below the ground level, earth plate surrounded by 15cm thick layers of common salt and charcoal dust starting from ground below 15 cm of earth plate and up to 15 cm above the same. GI plate connected with galvanised iron earth lead wire of 4mm dia by means of GI nuts, bolts and washers. wire laid in 15mm dia light grade GI pipe as protection from top of the plate up to test point (cost of protection pipe up to 7.5 meters from earth electrode will be included in the rates quoted by the contractor) with following:- (a) Test point of GI strip of size 25mmx4mm. (b) Watering pipe of GI pipe light grade 20mm bore from top of the earth electrode up to MS funnel with wire mesh embeded in floor of PCC earth pit. (GI Funnel should properly tightned on GI watering pipe and embeded in PCC floor of earth pit with open top suitable for watering of earth pits) (c) PCC earth pit 30x30x30cm constructed in PCC 1:2:4 type B1 exposed surfaces smoothly finished with 15mm thick cement mortar 1:6 plaster including RCC pit cover 25mm thick with 2 Nos MS handles of 12mm dia suitable for carrying of pit cover (d) Angle iron frame made of 40x40x4 mm angle iron PCC pit for holding the pit cover. Note:- The cost of excavation & earth work shall be included in the quoted rates.

S&F, in replacement, security light IP 66 with high power LED, 36 watt, energy saving, environment friendly, including bracket made out of GI pipe medium grade 40 mm bore 1.5 mtr long, made to shape, fixed with MS clamps of MS flat 40x6mm, nuts, bolts and washer and making connection with and provision of electric cable complete all as specified and directed.

Supply and fix bee 5 star rated ceiling fan 1200 mm sweep complete with including fitting and fixtures as per site requirement and complete accessories suitable for 230 volts single phase 50 Hz AC supply and connecting rod up with and including two core PVC insulated, PVC sheathed copper conductor all as specified and directed. Make : Havells / CG / Orient.

Supply and fix single pole and neutral enclosure with a two pin and earht plug and socket complete with one single pole MCB 32 A complete all as specified and directed. Make : Legrand / Siemens / Schneider.

Supply, installation, testing and commissioning of Air Conditioner, split ype (indoor, outdoor unit), single phase, rotary compresser and condenser coil of copper having cooling capacity 4500 K Cal per Hour (1.5 ton), BEE rating 3 star or above refregirent type R410A/R32 with cordless remote control unit complete all as specified and directed. Make : Voltas, Samsung, LG as approved by GE.

Supply, Installation & testing of voltage stabilizer for automatic operation single phase naturally air cooled indoor type and designed for input variation between 170 V to 260 V with out put voltage stabilized at 230 V with accuracy of + 2.5% with time delay system and of capacity 4 KVA complete all as specififed and directed.

ESS KAY BUILDER

M/s Vijay Construction Co.

Santokh Singh and Associates

Sai Construction Co.