PROVIDING 15 MTR LONG FLAG MAST POLE (20-SIDED POLYGON) WITH TOP DIA 200MM THICKNESS 5MM AND BOTTOM DIA 600MM THICKNESS 6MM IN MS HOT DIPPED GALVANIZED WITH MINIMUM 12 NO. OF FOUNDATION BOLTS WITH COATING OF PU PAINT IN OFF WHITE COLOUR WITH DOME, HE

Amount

Description and specification of items of work to be executed (complete work)

Earth work in excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in charge (All kind of soil).

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources).

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).

Steel reinforcement for R.C.C. work of pedestal size 1000x1000x1400mm having 12mmbars and 8mm bars including base reinforcement size 2550x2550mm having 10mm bars including straightening, cutting, bending, placing in position and binding all complete above plinth level. Mild steel and Medium Tensile steel bars.

Centering and shuttering including strutting, propping etc. and removal of form for foundations, footings, bases of columns, etc. for mass concrete.

Hot Dip Galvanized 20-sided polygon M.S. Pipe having two sections of equivalent length with 1m overlapping having top dia 200mm thickness of 5mm and bottom dia 600mm thickness of 6mm.

Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 metre height, backing filled with a grout of average 12 mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : (To be secured to the backing and the sides by means of cramps and pins which shall be paid for separately) : Red sand stone - exposed face fine dressed with rough backing. (40 mm thick).

Provision for transportation charges Hydra and erection of scaffolding etc. required for proper completion of work

Purchase of flag of size 8’ X 12’ in knitted polyester 140 GSM.

Provision for labour for installation of 15M High Flag Mast along with all hardware fittings and electrical fittings.

Provision for double drum winch with integral tool for the raising and lowering of flag with suitable feeder control panel for reversing operation of motor.

Provision for 2 No. of Flood Light IP 65 of minimum 200 watt with supply and laying of 3 Core x 2.5 Sq mm copper cable 50 RMT for suitable illumination of flag. (A) Flood Light IP 65 of 200 Watt

(B) 3 Core x 2.5 Sq mm copper cable

Provision for Polyurethane (PU) paint over the galvanized surface after application of primer coat.

AKSHIT BUILDERS

Bidder Name

THE SALAIMPUR CO OP L and C SOCIETY LTD

AKSHIT BUILDERS