WORKS SERVICES FOR WIDENING OF ROAD AND ASSOCIATED WORKS IN CAMP AREA AT AF STN AGRA

Excavation in trenches in hard/dense soil not exceeding 1.50 metre wide and not exceeding 1.50 metre deep for foundations pipe line etc or for shafts, wells, cesspits, manholes, pier holes etc and not exc 10 sqm on plan and not exceeding 1.50 metre in depth and getting out complete, all as specified.

Dismantling of stone slabs and tiles of any description and thickness as in floor, walls, apron etc. laid, bedded and pointed in any mortar complete all as specified and directed.

Rolling and consolidating formation surfaces in cutting with power roller exc 8 tonne but nexc to 1 tonne all as specified.

M&L for Soling (or sub base) 150 mm thick (each layer 75 mm compacted thick) with broken boulders or quarried stone of size 90 to 63 mm , inter stices filled, surface formed and rolled with 8 to 10 tonne power road roller and consolidated to required gradient and camber

M&L for 15 cm thick (compacted thickness) WBM(compaction in two layers i.e 7.50 cm each) , with coarse aggregates of grading 2 (63 to 40mm size) or of grading 3 (50 to 20mm size), spread, rolled and consolidated to gradient and camber requiredand rolled with 8 to 10 tonne power road roller all as specified.

M&L for preparing Unsurfaced water bound macadam by brushing with wire brushes for removing caked mud etc. swe eping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc.

M&L for applying evenly a priming/tack coat of paving bitumen with bituminous primer at 10 kg per 10 sq metre complete all as specified.

M&L for applying Bituminous premix asphaltic dense concrete 40mm consolidated thickness with 6% binder content of paving bitumen any penertaration VG-30 grade by weight of total mix incl cement filler on surface rolled compacted by using 8 to 12 tonne capacity poer roller to achieve required gradient and complete all as specified and directed.

M&L for preparation of existing bituminous surfaces, removing, dust, dirt grease and other foreign matters etc to receive the marking including thermo plastic (Reflective) line having 2.0 mm thickness (average) of uniform surface finish conforming to BS 3262 (Part 1) 1989 read in conjunction with the MORTH specification 803 clause 4.2.2 on bituminous surfaces in white/yellow colour and super imposed with glass beads confirming to BS 6088 read in conjuction with and MORTH specification 803 clause 4.3.3 complete all as specified and directed.

Supply and fixing cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions. complete all as per manufacturer instructions and approved by GE as directed.