Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
| 3 | Admitted-Finance | Admitted-Finance |
Tender Value
₹42.3 L
EMD Value
₹42,290
Closing Date
13 Dec 2019, 12:00 pmClosed
EXECUTIVE ENGINEER CONSTRUCTION DIVISION III JAMMU
Directorate of Samagra Shiksha, Channi Rama, Jammu
CONSTRUCTION OF SCIENCE LAB, ART CRAFT ROOM AND LIBRARY ROOM AT GHS MADA, ZONE CHENANI, DISTRICT UDHAMPUR
2019_RMSA_87377_1
E NIT No 169 of 2019-20 DIV III
Open Tender
Civil Works
Fixed-rate
180 days
CONSTRUCTION OF SCIENCE LAB, ART CRAFT ROOM AND LI
Please refer Tender documents.
6 documents required · 6 mandatory
₹1,000
EXECUTIVE ENGINEER CONSTRUCTION DIVISION III JAMMU
₹42,290
11 Feb 2020
3 Dec 2019
14 Dec 2019
3 Dec 2019
13 Dec 2019
3 Dec 2019
3 Dec 2019 - 13 Dec 2019
Amount
Earth work in excavation by manual means over areas (Exceeding 30 em and upto 1.5 mtr in depth , 1.5 mtr in width as well as 10 sqm on plan) including disposal of excavated earth upto 1 mtr from cutting edge , disposed earth to be levelled and neatly dressed in All kinds of soils
Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (Not exceeding 1.5 mtr in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, depth upto 1.5mtr. including disposal of excavated earth upto 1 mtr from cutting edge, disposed earth is to be levelled and neatly dressed in: 80%. All kinds of soils and 20% ordinary rock
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering , all works upto plinth level ( 1 : 4 : 8) 1 cement 4 coasre sand 8 stone aggregate grade, with 40mm nominal size . crushed
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering , all works upto plinth level ( 1 : 3 : 6)1 cement 3 coasre sand 6 stone aggregate grade , with 20mm nominal size . crushed with 20% boulders.
Providing and laying in position reinforeced cement concrete of specified grade excluding the cost of centering and shuttering , all works upto plinth level ( 1 : 1.5 : 3)1 cement 1.5 coasre sand 3 stone aggregate grade , with 20mm nominal size . crushed
Reinforced cement concrete work in wall (any thickness) including attached pilasters 'buttresses'plinth and string courses'fillet ,column pillar'piers ,abutment 'post and sturts etc upto floor five level excluding the cost of centering and shuttering ,finishing and reinforement ( 1 : 1.5 : 3 )1 cement 1.5 coasre sand 3 stone aggregate grade , with 20mm nominal size . crushed
Brick work with common burnt clay F.P.S (Non-modular) brick of class designation 75 in foundation and plinth in 1:6 (1 cement : 6 coarse sand)
Extra for brick work in Super structure above plinth level upto floor V level (By manual means)
Reinforcement of RCC work in Plinth band incl straightening, cutting, bending, placing in position and binding all complete.
Centering and shittering including strutting propping etc and removal of form work Foundation footing bases of columns etc
Centering and shuttering incl. struting, proping ,etc.and removal of form work for; lintel beam ,plinth beam ,girders,bressumers and cantilevers
Centering and shuttering incl. struting, proping ,etc.and removal of form work for;columns ,pillars,piers,abutments,posts and struts RCC Column
15 mm cement plaster on the rough side of single or half brick wall of mix 1:6 ( 1 cement : 6 fine sand )
12 mm cement plaster on wall of mix 1:4 ( 1 cement 4 fine sand )
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash asteners shall be paid for separately): Sal wood
Providing and fixing paneled or glazed shutters for doors and windows and clestory windows using 10 kg /sqm (4mm thick) float glass panes including ISI marked black enameled M.S. butt hinges bright finished of requried size with necessary screws, (35mm thick of 2nd class deodar wood).
Providing and fixing fly M S wire steel grade 304 wire gauge,to windows and clerestory windows using wire gauge with average width of aperture 1.4mm in both direction with wire of dia 0.50 mm all complete with 2nd class teak wood beading 62x19 mm
Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including lSI marked M.S. pressed Butt hinges bright finished of required size with necessary screws excluding panelling which will be paid for separately,al! complete as per direction of engineer- in charge. Second class deodar wood
Providing and fixing flat pressed 3 layer particle board medium density exterior grade (Grade I) or graded wood particle board IS : 3087 marked to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately) : 12 mm thick
Cement Concrete Flooring in (1:2:4) 1 cement : 2 coarse Sand : 4 stone aggregate finsihing with a floating coat of neat cement including cement slurry but exd. The cost of nosing of step etc. complete 50 mm thick with 20mm nominal size stone aggregates (Crushed)
Providing fixing and glass strips in joints to terrazo/ cement concrete floor 40 mm wide x 4mm thick
Steel work welded in built up section, trusses and framed works including cutting , hoising, fixing in position and applying a priming coat of approved steel primer incl all carriages complete
Providing corrugated G.S. sheet roofingincluding vertical/curved surface fixed with polymer coated J or L hooks bolts, nuts 8 mm diameter with bitumen and G.I limpet washers or with G.I limpet washers filled with white lead including a coat of approved steel primer and two coats of approved paint on overlaping of steels complete ( upto a pitchin horizontal/vertical or curved surface) excluding the cost of purlin ,rafters and trusses and including cutting to size and shape where ever requried 0.63 thick with zinc coating not less than 275gm/sqm
Providing ridges of hips of width 60 cm 0verall width plain GS Sheet fixed with polymer coated J or L hooks bolts, nuts 8 mm diameter with bitumen and G.I limpet washers complete 0.63 thick with zinc coating not less than275gm /sqm
Providing and fixing hard board celing sheet of approved quality with neccesary nails etc. complete 6mm thick including wooden corner moulding of triangle shape. as per requriment ( frame work paid separately)
Providing wood work in frames of false ceiling, partitions etc sawn and fixed in position second class kail wood
Applying priming coat with ready mixed pink or grey primer of approved brand and manufactures on wood work (hard and soft wood)
Painting of doors and windows with ready mixed synthetic enamel paint of approved brand and manufacturers in all shades (two or more coats) on new work
Making plinth protection 50mm thick with cement concrete ( 1 : 3 : 6) 1 cement : 3 Coarse sand: 6 stone aggregate) 20 mm nominal size f stone aggregate over 75 mm bed of dry brick ballast , 40 mm nominal size of well rammed and consolidated and grouted with fine sand including finishing the top smooth.
White washing with lime to give an even shade. New Work (three or more coats
Finishing walls with water proofing cement paint of required shade. New work (two or more coats) applied @3.84 kg/1O sqm
Electric wiring with 1.5 sqmm copper cable including 20 mm dia 2mm thick PVC pipe 5amp with sunken box and connection to the main pole complete as directed by engineer-incharge.
Providing and Fxing aluminium tower bolt ISI marked anodized (anodic coating not less than grade AC as per IS 1868) transparent or dyed to required colouur or shade with necessary screws etc. complete 100mm .
Providing and Fxing aluminium handle ISI marked anodized (anodic coating not less than grade AC as per IS 1868)transparent or dyed to required colouur or shade with necessary screws etc. complete 100mm
Providing and Fxing aluminium handle ISI marked anodized (anodic coating not less than grade AC as per IS 1868)transparent or dyed to required colouur or shade with necessary screws etc. complete 125 mm
Providing and fixing lSI marked oxidised M.S. sliding door bolts with nuts and screws etc. complet.e 300x16 mm
Providing and fixing plained eaves boarding including painting 2nd class deodar wood 300 x 32 mm
Providing and fixing Ms grill of reqd. patter in frame of window etc with M S flat ,square or round bars ,railing;pipe etc all complete fixed to opening/window frame with raw plugs,screw etc
Dry random rubble masonary with hard stone in foundation and plinth using nallah stone without bond stone
Providing Cement concrete 1:2:4 40 mm thick
Carriage of Sand by mechanical transport including loading , unloading & stacking complete lead upto 88 km av & manual labour 100 metre av
Carriage of stone aggregate below 40 mm thick by mechanical transport including loading, unloading & stacking complete lead upto 30 km av & manual labour 100 metre av
Carriage of bricks by mechanical transport including loading, unloading & stacking complete lead upto 105 km av & manual labour 100 metre
M/S Friends Group of Constructions
Shiva Construction
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .