Electrification works of undeveloped/unelectrified colonies (Ref. Or.No. of Corporation 984 dt. 21.05.2025) and other deposit works in the area of EDD-Laxminagar, Mathura

Carrying out the following works under deposit head upto the execution/completion and commissioning of works.

Carriage of 8.5/9 Mtr Long PCC Pole from 132 KV Store Center Mathura to site of work through the Kacha and Pakka road including the work of its loading and unloading at the respective ends including the cost of arrangement of labour, T&P, carrier etc. required for proper completion of work.(Distance 00-70 Kms.)

Carriage of 11 KV XLPE Cable size 3x70/3x120 sq.mm. Cable form Store Center Mathura/Agra including cost of shifting of drum from inside of store, removing of cable from drum and re-rolling of extra removed cable including loading & unloading at both ends.

Carriage of 11 KV XLPE Cable size 3x185/3x300 sq.mm. Cable form Store Center Mathura/Agra including cost of shifting of drum from inside of store, removing of cable from drum and re-rolling of extra removed cable including loading & unloading at both ends.

Erection of single pole structure 8.5/9 Mtrs on PCC Pole by digging of pits fitting of all relevant accessories as per RESPO norms.

Laying, sagging stringing and binding of ACSR Weasel Conductor on the erected PCC pole/STP including jumpering as per RESPO manual.

Laying, sagging stringing and binding of ACSR Dog Conductor on the erected PCC pole/STP including jumpering as per RESPO manual.

Laying, sagging stringing and binding of Arial Bunch Conductor on the erected PCC pole/STP including jumpering as per RESPO manual.

Laying, sagging,stringing and binding of armoured cable on erected pcc poles as per Respo manual/satisfaction of supervisiory engineer.

Laying of 11 KV XLPE Cable size 3x70/3x120 sq.mm. in the trench/G.I pipe/HDPE pipe and re-dressing of trench after laying of XLPE Cable for proper completion of work as per direction of supervising engineer.

Laying of 11 KV XLPE Cable size 3x185/3x300 sq.mm. in the trench/G.I pipe/HDPE pipe and re-dressing of trench after laying of XLPE Cable for proper completion of work as per direction of supervising engineer.

Work of red colour coding of poles by painting 3 no. strips with non-washable (epoxy based) paint at the height of 4.5 mtr above ground. Each strip will be 8mm. thick with a gap of 30 mm between each strip. as per drawings of uppcl (to be provided by supervisiroy engineer)

The contractor shall provide F clamps, D/P clamps, stay clapms, cross arm clamps, LT clamps, ABC clamps, suspension clamps, piercing connectors, I-hooks, dead end clamps, any other clamps, nut & bolts and shackle insulators without charging any extra cost, in case the same are not available in the stores. Contractor shall also provide/perform any contingent material/work at his own cost, which is not included in the boq/estimates but is required for execution/completion of the work. Further, any fabrication work, if required, shall also be carried out by the contractor at his own cost, for which no additional payment shall be admissible.