WBPHED/EE/AMD/ NIeT-10of 2025-2026/7

Amount

Supply , delivery of the following material at site :-

a )Supply & delivery and storage at site 7.0 m Swaged Type Street Tubular Pole (M.S) complete with all accessories like Base Plate, Cap & 1.0 m M.S Single arm bracket generally conforming to IS: 2713-1980 and as per technical specification given bellow :- Over all length - 7.0 M Length x out side dia. X thickness of different section :Bottom 4M x 114.5mm x 4.50mm - Middle 1.5M x 88.9mm x 4.05mm - Top 1.5M x 76.1mm x 3.25mm. - The above pole is provided with suitable size base plate & 1.0 m long of 40mmdia. M.S. Following Double Arm Brackets and pole as per designation 410-SP-02 & conforming to relevant I.S. ( Make: Approved Make). T.C. Needed.

70 Watt. LED Highly efficient IP66 LED street-light with aluminium pressure die-cast housing, toughened glass in the front and peanut lens for batwing light distribution,higher spacing between poles and maintenance-free system.(Model-LSFS-070-C,Make-Orient). (4 Nos for Existing Pole, 3 Nos for fitting with Single arm bracket on Top of the Roof Wall & 1 For New Pole )

4 Core X 10 Sqmm, 1.1 KV Grade XLPE insulated Al.Ar Cable.( From PDB Panel feeder to Busbar Chamber at Meter / Rest Room)(Make:- Approved Make)

3 CoreX 2.5 Sqmm industrial flexible copper cable wire/dia-30/0.25 PVC insulated with PVC sheathed. (Make:Approved Make) (For 01 Nos New Pole & 4 Nos for existing Pole Light).

Supplying and delivery of Wall Mounted 4 WAY, 63 Amp ,Busbar Chamber Busbar made of ETP Grade Copper (Model- IHBC006304, Make- Havells).

Supplying and Fixing GI water proof looping cable box having hinged GI Top Cover having 4 mm thick with rubber gasket lining, railway type mechanical locking arrangement, earthing terminal with lug etc. of the following sizes as indicated below,Comprising of one 250 V,15 A Kit-Kat fuse unit, one NL on,porcelain insulator etc. and housing the same in pole muffing incl. addition and alteration to the existing CC muffing (6:3:1)after dismantling the damaged looping cable box etc. where necy. incl. painting.

200 x 150 x 100mm. (For 01 Nos New Pole & 4 Nos for existing Pole Light).

Connecting the pole to earth busbar including S & F GI (Hot Dip) wire of size as below,spiral on pole body as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages.

No. 12 SWG.

Earthing with GI earth spike(1822mmX20 mm) and grouted the same under the ground level as per direction.

Supplying and fixing double door Horizontal 8 way TPN MCB Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. (With 40 Amp TPN MCB as a incomer + 8 Nos 10 Amp SPN MCB as a Outgoing)(Make-Havells, Model No-DHDPTHODRW08).

Laying of one No. cable upto 35 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed.

For 4 Core X 10 Sqmm, 1.1 KV Grade XLPE insulated Al.Ar Cable

Fixing outdoor type fluorescent/SV/MV light fitting on pole including S&F 40 mm dia x 1.68 mts. long GI Pipe (ISI-Medium) bracket with 40 mmx10 mm thick, MS clamp etc. and providing wiring with 2x1/1.40 PVC insulated and sheathed wire (single core) from loop box at the base of pole to light fiting through pole & bracket (without control switch) including making connections & painting . (3 Nos for fitting with Single arm bracket on Top of the Roof Wall).

Fitting & fixing of the outdoor lighting luminaries along with new & old accessories to the pole and sub-station building etc as per direction of EIC. (4 Nos for Existing Pole & 1 For New Pole).

Erection of Single Steel tubular pole of length as given below with/without sole plate & Cap etc. in CC foundation (Proportion and dimension indicated below), having 600x600x150 mm thick CC (4:2:1) base block below sole plate/pole with hard jhama metal including CC (6:3:1) muffing 0.30 mts. dia and 0.30 mts. above ground level including 3 mm thick neat cemented finish and GI earth bolt after making drilled holes etc. on pole & carriage of pole upto 1.6 Km from Store to work-site including filling up the excavated earth pit with shifted soil and ramming properly a) Upto 9.0 mtr. Size 0.6x0.6x1.70 mts (01 Nos New Street Light)

Extra on items 1& 2 above, for providing CC (6:3:1) base block (around the pole) dimension 0.45x0.45x0.60 mt. above ground level, neatly cemented finish (3 mm thick), at the base pole (in lieu of CC muffing) incl. drilled hole in pole suitable for alkathene/polythene pipe entry, for street light wiring, without Loop Box. (01 Nos New Street Light).

Painting of Steel Tubular Pole of lengths and no. of coats of paint, as given below with ready mixed paint/primer of approved make, and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. for receiving fresh coat of paint. A) Upto 9.0 mtr. long pole. (01 Nos New Street Light & 5 Nos Existing Pole).

i) 1st coat of aluminium paint over 1 coat of RO priming

ii) 2nd coat of aluminium paint over 1st coat

Wiring in For Pump House & Chlorine Room:-

Supplying and fixing PVC Rigid Conduit 'FR' [Precision Make] on wall, ceiling with saddles and other accessories as required and mending good damages to building works. (For Chlorine Room and Pump House). 20mm size

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required. (For Chlorine Room and Pump House).

3 X 22/0.3(1.5 Sqmm).(For lighting Fixtures)

3 X 36/0.3(2.5 Sqmm).(For Exhaust Fans)

3 X 56/0.3(4 Sqmm).(For industrial Plug Sockets)

Supplying & Fixing GI Modular Switch Board of the following sizes complete with three no. suitable size Copper bar with holes (for Ph, N & E) fixed on bakelite/Hard Rubber insulator over the MS welded chairs incl. top cover flushed in wall for housing the board after cutting the brick wall incl. making earthing attachment, painting and mending good damages to building works.

12 Module (For Pump House)

8 Module (For Rest Room)

Supplying & Fixing Industrial Plug & Socket board with 240 V, 20A, SPN & Earth Metal Industrial Plug socket & 20A Industrial top incl. S&F 20 A SP MCB breaking capcity 10kA (C- Curve) in SS enclosure fixed on wall and cecessary conection.

Supply & Fixing 240 V 6 A Modular type switch (Brand approved by EIC) on existing GI Modular type switch board having top cover plate and making necessary connections as required

Supply & Fixing 240 V, 6A, 5 pin Modular type plug socket (Brand approved by EIC), without switch & plug top, on existing GI Modular type switch board with top cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240V, Modular Socket (2 Module) type fan regulator (Step type) (Brand approved by EIC) on existing Modular GI switch board with top cover plate incl. making necy. connections etc.

Supply & Delivery of 3 Blade 1200 mm Sweep ceiling fan, 220V-240V,50 Hz,AC.(Make:-Approved Make)(For Rest Room & Pump House)

Supply & Delivery of 4 ft. long 22 Watt LED Tubelight Slim LED batten with aluminium housing and polycarbonate diffuser is an ideal replacement solution for existing battens/fluorescent lamps with elegantly designed end caps.(Make-Approved Make)

450 mm Sweep exhaust fan 220V-240 V,50 Hz, 1400 rpm, Single phase.(Make:-Approved Make)

Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire.

Fixing only single/twin fluorescent light fitting complete with all accessories directly on wall/ceiling by screws etc.

Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following diameter: 45 cm (18")

Wiring For Rest Room:-

Wiring in 1.1 KV grade single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) of following sizes in 25mm PVC casing-capping (Precision make) incl. necy. PVC clips, fittings etc.

2 x 22/0.3 (1.5 sqmm)

Pumping Machinery Portion:- Supply and delivery of following materials at site:-

Supply, Delivery and storage at Site of specification Discharge -40 M3³/Hr & Head -30 MWC Horizontal Split Casing Centrifugal Pumping Machinary with baseplate,flexible coupling,coupling guard ,foundation bolt etc. with motor 7.5KW/10 HP Horizontal foot Mounted Induction Motor (IE 3 type) for the pump duty mentioned above,with adequat margin.(For Clear water Pump)

4 Core X 16 sqmm Aluminum Armored, XLPE insulated 1.1 K.V. grade cable, conforming to IS 7098(I) as per direction of EIC. (Make:- Approved in vendor list.)(For Individual induction Motor)

Installation,Testing & Commissioning of above items no 18.1 to 18.2 including construction of Pump foundations, necessary pipe and valve support,laying of cables with necessary jointing materials, earthing arrangement including supply of all erection items etc.as required for complete installation as per relevant standard & IE rules in compliance with specification of NIT and upto entire satisfaction of EIC.

Add GST @ 18%

Add CESS @ 1%

M/s. SOMA ENTERPRISE (BID ID -6549846)

Ciemenics (BID ID -6551986)