Modification of existing Terminal Building. SH SITC of Internal and External Wayfinding Signages at Gaya Ji airport.

Refer design drawing no. 2.1a-S Ceiling Hung Directional Sign Providing and fixing illuminated signs including all operations from fabrication to installation all complete as per drawings, technical specifications, signage schedule and to the satisfaction of the EIC. Sign face Sign face shall be made in 8 mm thick 040 white acrylic (as specified) having graphics pasted in Plotter cut Block out vinyl.Entire panel covered with a protective overlaminate. The films to wrap around the edge of the acrylic to a distance of 25mm on the back side. The Plotter cut block out vinyl shall match the specified colour (colour Pantone Black 6C) and vinyl for text Pantone yellow C or Cyan 311C as per graphics and of specified make duly approved by the Engineer-in-Charge. Sign Frame Providing and fixing sign frame 50mm wide Powder coated, colour RAL 9006 special aluminium extrusion with inbuilt frame to receive the sign face. The sign face shall be fixed to sign frame with 3M brand dual lock system in one side and 3M both way tape from the other side. The panel should be made easily openable for maintenance. Sign internal Structure Providing and fixing Frame work of Aluminium 25mmx 25mm x 3 mm hollow square sections. Shall be directly fixed to the sign frame. Suspender Providing and fixing Stainless steel 25 x 25mm x 3 Hollow sections mounted on slabs/beams/walls.All hardware used for fixing of sign shall be Stainless steel. Lighting All internal illumination shall be using Power LED Lights from Osram or equivalent (Edge lighting - 6500K, 24 v, with optimal homogeneous backlighting & light Throw of minimum 4 ft) with electronic controllers, having even spread and overlaps to avoid banding and dark spots and adhering to the LUX levels mentioned in the performance specification. Cost to include all internal connections and Wiring, terminating and connecting the incoming cable laid at the site. The actual structural design of the sign for its stability shall be responsibility of the contactor. Secret fixing methods should be used to fix parts together. Accessories: Providing and fixing all accessories such as thimbles, end connectors, nut-inserts, screws, rivets, bolts, washers, nuts, etc. complete as per drawing. 1 Message - Size 2100 X 255 MM (Single Side)

Refer design drawing no. 2.1a-S Ceiling Hung Directional Sign Providing and fixing illuminated signs including all operations from fabrication to installation all complete as per drawings, technical specifications, signage schedule and to the satisfaction of the EIC. Sign face Sign face shall be made in 8 mm thick 040 white acrylic (as specified) having graphics pasted in Plotter cut Block out vinyl.Entire panel covered with a protective overlaminate. The films to wrap around the edge of the acrylic to a distance of 25mm on the back side. The Plotter cut block out vinyl shall match the specified colour (colour Pantone Black 6C) and vinyl for text Pantone yellow C or Cyan 311C as per graphics and of specified make duly approved by the Engineer-in-Charge. Sign Frame Providing and fixing sign frame 50mm wide Powder coated, colour RAL 9006 special aluminium extrusion with inbuilt frame to receive the sign face. The sign face shall be fixed to sign frame with 3M brand dual lock system in one side and 3M both way tape from the other side. The panel should be made easily openable for maintenance. Sign internal Structure Providing and fixing Frame work of Aluminium 25mmx 25mm x 3 hollow square sections. Shall be directly fixed to the sign frame. Suspender Providing and fixing Stainless steel 35 x 35mm x 3 Hollow sections mounted on slabs/beams/walls.All hardware used for fixing of sign shall be Stainless steel. Lighting All internal illumination shall be using Power LED Lights from Osram or equivalent (Edge lighting - 6500K, 24 v, with optimal homogeneous backlighting & light Throw of minimum 4 ft) with electronic controllers, having even spread and overlaps to avoid banding and dark spots and adhering to the LUX levels mentioned in the performance specification. Cost to include all internal connections and Wiring, terminating and connecting the incoming cable laid at the site. The actual structural design of the sign for its stability shall be responsibility of the contactor. Secret fixing methods should be used to fix parts together. Accessories: Providing and fixing all accessories such as thimbles, end connectors, nut-inserts, screws, rivets, bolts, washers, nuts, etc. complete as per drawing. 2 Message - Size 2100 X 515 MM

Refer design drawing no. 2.1a-S Ceiling Hung Directional Sign Providing and fixing illuminated signs including all operations from fabrication to installation all complete as per drawings, technical specifications, signage schedule and to the satisfaction of the EIC. Sign face Sign face shall be made in 8 mm thick 040 white acrylic (as specified) having graphics pasted in Plotter cut Block out vinyl.Entire panel covered with a protective overlaminate. The films to wrap around the edge of the acrylic to a distance of 25mm on the back side. The Plotter cut block out vinyl shall match the specified colour (colour Pantone Black 6C) and vinyl for text Pantone yellow C or Cyan 311C as per graphics and of specified make duly approved by the Engineer-in-Charge. Sign Frame Providing and fixing sign frame 50mm wide Powder coated, colour RAL 9006 special aluminium extrusion with inbuilt frame to receive the sign face. The sign face shall be fixed to sign frame with 3M brand dual lock system in one side and 3M both way tape from the other side. The panel should be made easily openable for maintenance. Sign internal Structure Providing and fixing Frame work of Aluminium 25mmx 25mm x 3 hollow square sections. Shall be directly fixed to the sign frame. Suspender Providing and fixing Stainless steel 35 x 35mm x 3 Hollow sections mounted on slabs/beams/walls. All hardware used for fixing of sign shall be Stainless steel. Lighting All internal illumination shall be using Power LED Lights from Osram or equivalent (Edge lighting - 6500K, 24 v, with optimal homogeneous backlighting & light Throw of minimum 4 ft) with electronic controllers, having even spread and overlaps to avoid banding and dark spots and adhering to the LUX levels mentioned in the performance specification. Cost to include all internal connections and Wiring, terminating and connecting the incoming cable laid at the site. The actual structural design of the sign for its stability shall be responsibility of the contactor. Secret fixing methods should be used to fix parts together. Accessories: Providing and fixing all accessories such as thimbles, end connectors, nut-inserts, screws, rivets, bolts, washers, nuts, etc. complete as per drawing. 3 Message - Size 2100 X 775 MM

4 Message

5 Message

Refer design drawing no. 2.1c-S Wall mounted Directional Sign Providing and fixing illuminated signs including all operations from fabrication to installation all complete as per drawings, technical specifications, signage schedule and to the satisfaction of the Engineer-in-Charge. Sign face Sign face shall be made in 8 mm thick 040 white acrylic (as specified) having graphics pasted in Plotter cut Block out vinyl. Entire panel covered with a protective overlaminate. The films to wrap around the edge of the acrylic to a distance of 25mm on the back side. The Plotter cut block out vinyl shall match the specified colour (colour Pantone Black 6C) and vinyl for text Pantone yellow C or Cyan 311C as per graphics and of specified make duly approved by the Engineer-in-Charge. Sign Frame Providing and fixing sign frame 50mm wide powder coated, colour RAL 9006 special aluminium extrusion with inbuilt frame to receive the sign face. The sign face shall be fixed to sign frame with the 3M brand dual lock system in one side and 3M both way tape from the other side. The panel should be made easily openable for maintenance. Sign internal Structure Providing and fixing Framework of Aluminium 25mmx 25mm hollow square sections. Shall be directly fixed to the sign frame. Lighting All internal illumination shall be using Power LED Lights from Osram or equivalent (Edge lighting - 6500K, 24 v, with optimal homogeneous backlighting & light Throw of minimum 4 ft) with electronic controllers, having even spread and overlaps to avoid banding and dark spots and adhering to the LUX levels mentioned in the performance specification. Cost to include all internal connections and Wiring, terminating and connecting the incoming cable laid at the site. The actual structural design of the sign for its stability shall be responsibility of the contactor. Secret fixing methods should be used to fix parts together. Accessories: Providing and fixing all accessories such as thimbles, end connectors, nut-inserts, screws, rivets, bolts, washers, nuts, etc.complete as per drawing. 1 Message - Size 2100 X 255 MM (Single Side)

1 Message - Size 2100 X 255 MM (Single Side)

2 Message - Size 2100 X 515 MM (Single Side)