Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹18.6 LAccepted-AOC 86 NAROTTAM KUNJ MADHU NAGAR AGRA UTTAR PRADESH 282001 | AGRA | UTTAR PRADESH | 282001 | 1 | Accepted-AOC Being lowest | |
| 2 | 2₹19.9 L+₹1.2 L (6.55%)Rejected-Finance C 89 CECC VILL POST PATHOLI AGRA UP | AGRA | AGRA | UTTAR PRADESH | 283105 | 2 | Rejected-Finance Not being lowest | |
| 3 | 3₹26.0 L+₹7.3 L (39.4%)Rejected-Finance 00 BEHIND CHARCH NAYAGOWAN LAKHERA BEHIND RAMA MANI DAIRY KATNI MADHYA PRADESH 483501 | KATNI | MADHYA PRADESH | 483501 | 3 | Rejected-Finance Not being lowest | |
| 4 | 4₹26.2 L+₹7.6 L (40.7%)Rejected-Finance AT JAIRAMPUR MORE GOLAKDIH DHANBAD 826001 JHARKHAND | DHANBAD | DHANBAD | JHARKHAND | 826001 | 4 | Rejected-Finance Not being lowest | |
| 5 | 5₹29.6 L+₹11.0 L (58.8%)Rejected-Finance | 5 | Rejected-Finance Not being lowest |
Tender Value
₹35.6 L
EMD Value
₹71,220
Closing Date
25 Feb 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
HQ CWE Agra
112 Taj Road Agra Cantt
REPAIRS TO ROADS AND ROAD SIDE FURNITURE UNDER AGE B/R-II OF GE (WEST) AGRA
2023_MES_577743_1
84275/E8
Open Tender
Civil Works
Item Rate
180 days
Agra
MES contractors enlisted in Class D category a(v) for unenlisted contractors meeting the enlistment criteria corresponding to value class and category of work
8 documents required · 8 mandatory
₹500
GE West Agra
₹71,220
Yes
21 Mar 2023
28 Jan 2023
4 Mar 2023
28 Jan 2023
25 Feb 2023
11 Feb 2023
28 Jan 2023 - 4 Feb 2023
Amount
M&L for preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc complete all as specified and directed
Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area not exceeding 50mm deep in area exc. 400 Sqm complete all as specified and directed.
M&L for applying evenly a priming / tack coat with bituminous primer (paving bitumen VG-10) @ 5 kg per 10 sqm over the prepared surfaces by mechanical sprayer complete all as specified and directed.
M&L for applying evenly a priming / tack coat with bituminous primer (paving bitumen VG-10) @ 10 kg per 10 sqm over the prepared surfaces by mechanical sprayer complete all as specified and directed.
M&L for 7.5 cm thick (compacted thickness) water bound macadam with coarse aggregate (granite, trap or basalt) of grading 2 (63 to 40 mm size) or of grading 3 (50 to 20 mm size), spread, rolled with 8 to 10 tonne power roller and consolidated to required gradient and camber complete all as specified and directed.
M&L for preparing unsurfaced water bound macadam surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc complete all as specified and directed.
M&L for premix bituminous macadam n. exc. 75 mm consolidated thickness or less using binder content 4% by weight of total mix (using paving bitumen VG-30 grade) including cement filler, mix in hot mix plant using design mix and laid and rolled and compacted to required camber and gradient with 8 to 10 tonne power road roller complete all as specified and directed. Note :- (a) Bituminous macadam shall be mixed in hot plant, transported from plant to work site and laid / spread by means of mechanical paver. (b) Contractor shall quote his rate on this basis of binder as mentioned in above item if there is any variation in the actual binder content used in lower side, the rate shall be adjusted . however no price adjustment shall be made if the binder content works out to more than as specified in BOQ
M&L for laying bituminous premix asphaltic semi dense asphaltic concrete with using mechanical paver 30 mm thick consolidated thickness with using 5.5% binder content by weight of total mix, (Paving bitumen VG-30) rolled and compacted with 8 to 10 tonnes power road roller to required camber and gradient complete all as specified and directed. Note :- (a) Premix concrete shall be mixed in hot plant, transported from plant to work site and laid / spread by means of mechanical paver. (b) Contractor shall quote his rate on this basis of binder as mentioned in above item if there is any variation in the actual binder content used, the rate shall be adjusted lower side of binder used however no price adjustment shall be made if the binder content works out to more than as specified in BOQ
M&L for preparation of road surface and applying thermoplastic reflective paint for marking of minimum 2.5 mm thick single coat as a arrow dashes, letters etc,on road or pavement with using retro reflective thermoplastic road marking paint of approved make applied with machine all as per manufacturer's instructions complete all as specified and directed.
S&F in repair of two way solar blinking Cat Eyes (road stud) of size 125 mm x 125 mm x 25 mm, 6 LEDs with stem fixed with chemical as per manufacturer instruction complete all as specified and directed.
S&F in repair plastic speed bumb of ABS material speed beaker / rubber rumbler of size L 250 mm x W 350 mm x H 50 mm fixed with metalic bolt of suitable size embedded in epoxy as per manufacturer's instructions complete all as specified and directed. Note:- Holes in road shall be drilled with drill machine and necessary cleaning of hole shall be done with blower prior to install the road stud .
S&F in repair safety traffic safe PVC unbrakable convex mirror (60 cm ) made of poly carbonate / ABS / Fibre including fixing arrangements, fixed to MS pipe 50 mm dia and 1.5 mtr high from ground level, duly painted with two coats of synthetic enamel paint over a coat of red oxide primer and embedded in ground with and including PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate), excavation, returning, filling, removal etc of size (250 mm x 250 mm x 400 mm) complete all as specified and directed. Note :- The rate for excavation, removal of soil & PCC complete shall be included in above quoted rate.
S&F in repairs metal tubular delineator made out ABS round body fitted with 2 Nos 65 mm dia highly reflective made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermoplastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) of size (150 x 150 x 300 mm) complete all as specified and directed. Note :- The rate for excavation, removal of soil and PCC complete shall be including in above quoted rate.
S&F repair road side sign board of size ( 1.2 m x 1.2 m x 2 mm) of material MS sheet painted both side fixed around stainless steel 40 mm dia pipe with two Nos legs above GL 2.0 m height and below GL 0.5m and space for writing for 20 letters minimum and the height of letters not exc. 100 mm including writing on board with reflective paint on both side as approved by GE and embedded with PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) of size (0.5m x 0.5m x 0.5m) including complete earth work complete all as specified and directed.
Taking down of old precast interlocking paver block of any size and shape any description and in any position complete all as specified and directed.
M&L for broken stone or boulders hardcore of gauge n. exc. 63 mm deposited spread and levelled in layers n. exc. 15 cm thick watered and rammed to a true surface for levelling and slop maintaining complete all as specified and directed.
M&L for 75 mm thick PCC (1:4:8) type C-2 (using 40 mm graded stone aggregate) complete all as specified and directed.
M&L for 25 mm thick sand cushion layer for laying interlocking pavers complete all as specified and directed.
M&L for 80 mm thick precast PCC interlocking coloured paver rubber moulded block factory made of grade M 40 single layer monolithic high density manufactured by electro vibro hydraulically operated block making matching conforming to IS-15658 - 2006 laid and jointed over sand cushion layer complete all as specified and directed. Note :- Sand cushion shall be measured & paid separately.
C P Singh and Co
3Krishna Enterprises
Rahul Construction Co
M/S OMKAR SINGH YADAV
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .