Construction of New Building for Marina Fire and Rescue Service Station at Dr. Besant Road, Ice House in Chennai city

Earth work excavation in all soils (including refilling) a) 0 to 2 mt.

b. 2 to 3 mt.

Earth work excavation for Open foundation (excluding refilling) a) 0 to 2 mt.

b. 2 to 3 mt.

Providing Anti-termite treatment to soil

Supplying and filling in foundation and basement with crushed stone sand in layers of 150 mm thickness

Filling with Excavated Earth

Supplying and filling stone dust

Supplying of stone dust including conveyance and cost of materials

Supplying and laying of Rubber moulded hydraulic pressed Paver blocks following thick b) 63mm thick Paver block

Plain cement concrete 1:5:10 for Foundation & Basement

Plain cement concrete 1:2:4 for Foundation & Basement and other similar works

Providing and laying in position, Standardised Concrete Mix M-30 Grade a. In Foundation and basement

b. In Ground Floor

c. In First Floor

d. In Second Floor

e. In Third floor

f.In Fourth floor

Providing Rain water harvesting pit by augering 300mm dia bore pits to a depth of 5.50m overall depth Precast slab Standardised Cement concrete M 30 grade a). Providing pit

b) Augering 30cm dia

Supplying and fixing of fibre mixed precast slab of 50mm thick of all required shapes made in cement concrete 1:3:6

Brick work in CM 1:5 using chamber burnt bricks of size 9”x4½”x3” (23x11.4x7.5 cm) a) Foundation and basement

Brick work in Cement Mortar 1:6 using Chamber burnt bricks of size 9”x4½"X3” (23x11.4x7.5cm) for super structure in the following floors b. In Ground Floor/Stilt floor

b. In First Floor

c. In Second Floor

d. In Third Floor

e. In Fourth Floor

Brick partition wall in Cement Mortar 1:4 114mm thick for super structure in the following floors using chamber burnt bricks of size 9”x4¼”x3” (23x11.4x7.5cm) a. In Foundation and basement

b. In Ground Floor/stilt floor

c. In First Floor

d. In Second Floor

e. In Third Floor

Brick partition wall in Cement Mortar 1:4 75mm thick for super structure in the following floors using Chamber burnt bricks of size 9”x 4½”x 3” (23 x 11.4 x 7.5cm) b) In Ground Floor

b. In First Floor

c. In Second Floor

d. In Third Floor

Brick partition walls 50mm thick using kiln burnt country bricks of size 8¾”x4¼”x2” (22x11x5cm) in cement mortar 1:4 a. In Ground Floor

b. In First Floor

c. In Second Floor

d. In Third Floor

e. In Fourth Floor

Flooring in C.C.1:5:10

Floor plastering in C.M. 1:4, 20 mm thick

Finishing the top of flooring with cement concrete 1:3, 20 mm thick Ellispattern Flooring (1 No Sand)

Weathering Course with concrete broken brick jelly 20mm gauge in pure burnt lime stone slaked and screened (1 No Sand)

Finishing top of roof with one course of Pressed Tiles of approved superior quality of size 23cmx 23cmx20mm thick laid over weathering course in CM 1:3

Supplying and fixing of Colour glazed tiles using Grout (Tile Joint Filler), C.M 1:2, 10mm thick

Supplying and fixing of colour Ceramic Tiles Anti skid using Grout (Tile Joint Filler).

Supply and laying superior variety Concrete Designer tiles for flooring in CM 1:3, 20mm thick

Supplying and delivery of "Godraj Nav-tal Ultra XL+"/ equivalent lock with 3 Key of approved quality ISI make

Supplying and fixing of PVC Trims / Corners beading suitable colour in toilet wall cladding in all floors

Formwork using M.S.Sheet a) For Column footings,plinth beam,Grade beam, Raftbeam,Raft slab etc.,

b.Plain surfaces such as Roof slab, floorslab, Beams, lintels, lofts, sill slab, staircase, portico slab and other similar works

c.For Square and rectangular columns and small quantities

d.Vertical wall

f.Curved surface

g.Double centering portico area

Plastering in C.M. 1:5, 12 mm thick

Plastering in C.M. 1:4, 12 mm thick

Special ceiling plastering in cement mortar 1:3, 10 mm thick

Plastering with CM 1:3, with 12 mm thick mixed with water proofing compound (CICO) at the rate of 2 kg / 10 sq.m

Plastering in CM 1:5, 12mm thick for border finish in all floors a. 150 mm wide

b. 75 mm wide

c. 50 mm wide

White washing three coats using clean shell lime slaked

Painting - New "wood work"

Painting - New "iron work"

Providing one coat of Wallputty for new plastered surface

Providing two coats of Plastic Emulsion paint including primer for inner walls

Providing two coats of Exterior Emulsion paint including primer for outer walls

Stucco plastering 12 mm thick using colour Marble chips of size 10mm and below using 70.20kgs of cement and 15cum of colour marble chips for every 10 sqm over the existing plastered surface

Providing wooden Melamine polish for new wood work

Teak wood Wrought & Put up a) T.W. over 2 m & below 3 m

b) T.W. below 2 m length.

Supply and fixing of Magnetic door catches

M.S.Holdfast

Supply & Fixing of WPC Decora door set where the door shall be extruded as a single core door with lead free compound and the surface shall have Decore Design

Supplying and fixing in position of UPVC Ventilator louvered ventilator type for all sizes

Supplying and fixing of Stain free Nano polish Vitrified Tiles of size (600x600x8mm) for flooring C.M 1:3, 20mm thick

Supplying and fixing in position of UPVC window of casement type( open) for all sizes

Supplying and fixing of Best Indian Teakwood Panelled door shutters Double leaf in position with Brass Fittings b.1200 x 2100mm

Supplying and fixing of Single leaf Solid core flush door shutters using boiled water resistance (BWR) teak wood ply as per IS 303-1989 a) Door size 1000mm x 2100mm (Single Leaf)

M.s Grills

Anticorrosive treatment for window grills

Supplying, fabricating and placing of Mild Steel Grills Fe550D (Corrosion resistant reinforcement) of all diameters for reinforcements for all floors

Supplying, laying, fixing and jointing the following UPVC pipes of schedule 40 of wall thickness (fully consealed in walls) c. 20mm dia UPVC water supply

Providing Cuddappah slab of 20mm thick, finishing with two sides for cupboard, ward-robes, shelves, kitchen platform slabs, sink and other similar works a. Ground floor

b. In First floor

c. In Second floor

d. In Third floor

Providing Cuddappah slab of 40mm thick, finishing with two sides for cupboard, ward-robes, shelves, kitchen platform slabs, sink and other similar works II. 40mm thick a. In Ground floor

b. In First floor

c. In Second floor

d. In Third floor

Providing T.W.double leaf shutters with 9mm thick BWR Ply wood for cupboard/ward robes shutters

Supplying and fixing of 110mm dia PVC SWR pipe with ISI mark confirming to IS 13952:1992- type 'A' for Rain water down fall pipe

Supplying and fixing of C.I. steps of approved quality and brand (1 Not less than 5kg 1 No)

Supplying and fixing of Brass Chromium plated screw down tap 15mm dia (heavy type not less than 430 grms weight) with ISI mark.

Supplying and fixing of half turn C.P Long body Tap of 15mm dia of best quality

Supplying and fixing of half turn C.P short body Tap of 15mm dia of best quality

Supplying and fixing of C.I. manhole cover with locking arrangements of approved quality and brand of following size (50 kg) 60 x 60cm (Heavy Duty) with Frame

Drilling of borewell including transportation from one place to a1 Nother place a) Drilling of borewell in upto 76m

b) Form 77 to 91m

c) Form 92 to 107m

d) Form 108 to 122m

Reaming from 150mm dia pilot bore to 300mm dia bore as directed by the departmental officer’s up to 60m depth ending from ground level. a) Drilling of borewell in upto 60m

b) Form 61m to 90m

c) Form 91m to 120m

Supply and erection of following dia of PVC casing pipes (6Kg/cm2) as per IS 12818/2010 of approved quality for bore wells a) 150mm dia of PVC casing pipes (6Kg/cm2) (Shallow depth)

b) 200mm dia of PVC casing pipes (6Kg/cm2) (Shallow depth)

Supply and delivery of 150mm dia of Ribbed screen PVC casing pipes (6Kg/cm2) without excise duty as per IS 12818/2010 of approved quality for bore wells

Labour charges for inserting of Following PVC Casing pipes assembly (With slots or without slots) in the drilled hole a) 150mm dia casing pipes assembly

b) 200mm dia casing pipes assembly

Supply and fixing of 160mm dia PVC end cap of approved make as per IS 10124/1982 Part-II for borewell top cover of 6.1mm thick with inner thread

Charges for developing the bore well with air compressor of 300 CFM capacity (Minimun 8 Hours)

Supply and delivery of clear water vertical wet type (Three Phase) submersible pumpset suitable for 150mm dia borewell conforming to IS 8034/2002 without panel board Duty: 75 LPM x 60m

Labour charges for the erection of submersible pumpset in Borewell/open well including fixing and jointing submersible cable with proper clamps upto the starter to required depth

Supplying, delivery and laying of following dia UPVC pipe Schedule 40/ schedule 80 of approved ISI quality below Ground Level a) 40 mm dia UPVC pipes Schedule- 80

b) 50mm dia UPVC pipes Schedule- 80

Supplying, laying and jointing the following dia of UPVC Pipes of schedule 40/ schedule 80 with ISI mark of best approved quality (above ground level) a) 40 mm dia UPVC pipes schedule 80 with required UPVC specials

b) 50mm dia UPVC pipes Schedule- 80

THREE PHASE PANEL BOARD- D.O.L WITH TWO LEVEL GUARD AND AUTO START Supply and delivery of direct online starter confirming to IS13947, IEC60947-1 and as amended thereafter with suitable KW rating for operation upto 5 HP

Supply of PVC insulated and sheathed follwing core and sq.mm flat type copper cable confirming to IS 694/1990,cable for submersible motor a) 3 core 4 Sq.mm flate type copper cable

Labour charge for laying of following PVC insulated and sheathed flat type copper cable (For laying below GL including earth work ) b) 3 core 4 sqmm

Supply and delivery of required dia Nylon rope of superior quality for submersible pumpset in borewell

Supplying and delivery of following dia MS clamp sets as per IS 1239/part II for erection of submersible pumpset in wells a) 150mm dia MS clamp sets

Supply and delivery of Open well Submersible pump set conforming to IS 14220 /2002 without panel board and as amended thereafter and BEE 3 Star Rated capable of discharging the following duties due to all causes Duty: 300LPM x 40m

Supplying, laying, fixing and jointing the following PVC pipes as per ASTM D - 1785 of schedule 40 a) 32mm dia

b) 25mm dia

Supplying, laying and fixing of 20 mm dia CPVC Pipe ‘B’ Class of best approved quality for Hot water line fully concealed in walls

Supplying and fixing of porcelin Wash hand basin (white without pedastal), superior variety of size 550x400mm with all accessories

Supplying and fixing of approved brand Porcelain Flat Back urinal superior variety

Supplying and fixing 150mm x 100mm size stone ware Gully trap with iron gratings over a bed of 150mm thick

Supplying and fixing of PVC Nahani Trap Not less than 75mm 4 way / 2 way (Superior variety)

Supplying and fixing of PVC low level flushing tank (White - 10 litre capacity) with all internal fittings (wall mounting type)

Supplying and fixing of Indian Water Closet white glazed (oriya type) of size 580 mm x 440 mm of approved make with ISI mark grade ' P' or "S' trap - In Ground floor

Supplying and fixing of Indian Water Closet white glazed (oriya type) of size 580 mm x 440 mm of approved make with ISI mark with PVC SWR grade ' P' or "S' trap- (Other than ground floor)

Supplying and fixing EWC superior variety (white) 500mm with PVC SWR grade 'P' or 'S' trap

Supplying and fixing the following dia PVC (SWR) pipe with ISI mark confirming to IS 13952:1992- type 'B' for soil line with relevant specials confirming to IS 14735 a) 110 mm dia.

b) 75 mm dia.

Supply and erection of hot dip galvanized 7.0 mtrs. Free standing Double Arm bracket 8 sided octogonally continousaly tapered structure pole as per IS-875 with following provisions Height : 7.0 Mtrs.Top Dia (A/F) : 70 mm Botom Dia (A/F) : 140 mmThickness of pole : 3 mm

Supplying, laying and jointing the following dia UPVC Non Pressure pipe of SN8 SDR 34 (S 16.5) as per IS 15328/2003 a. 110 mm UPVC 1 Non Pressure pipe

b. 160 mm UPVC 1 Non Pressure pipe

Supplying and fixing of best approved quality of following CP water supply/Sanitary fittings confirming to I.S. specification b) CP two Way bib cock with health faucet

b) CP Shower Arm with Overhead Shower Rose

Supply and delivery at site and fixing of SFRC manhole cover with frame with locking arrangement of clear opening heavy duty (35 M.T Capacity) a. 600mm x 600mm

Supplying and fixing of 20mm dia aluminium hanger rods

Supplying and fixing of aluminium towel rails of 75cm long

Supplying and fixing of aluminium plate with five pins for coat stand

Providing and fixing iron chromium plated 8 gauge Picture hooks

Supply and Fixing of Bevelled edge mirror of approved quality and brand of size 500x400x5.5mm

Supply and planting of avenue trees

Supplying and fixing of triangular shape chicken mesh tree guard

Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark with suitable size PVC box (Fire retardant box) for coastal a. Light point with ceiling rose

b. Light point without ceiling rose

c. Calling bell point with Buzzer/Calling bell

Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark conforming to IS: 694/1990, 1.1.k.v. grade cable for Fan point.(PVC Electrical Box )

Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for Staircase Light Point (PVC Electrical Box )

Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point @ Switch Board Itself.

Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point @ Convenient Places.(PVC Electrical Box )

Supplying and fixing of 15 Amps 3 pin flush type plug using ( PVC Box , Fire Retarded Box)

Providing Earthing station using pipe electrode as per IS 3043 using 2.5m of 40mm and 1.0 m of 20mm B-class GI pipe

Supply and fixing of best approved superior variety concealed type Fibre box with M.S. Fan Hook

Charges for assembling and fixing of ceiling fan

Supply and delivery of following Electric Ceiling fan with ISI mark a) 48" Electric fan 1200mm sweep

Supplying and fixing of 225 mm dia sweep AC exhaust fan of approved ISI Quality

Supplying and fixing of LED Bulb for suitable for fixing it to pendent / bakelite battern holder of best approved variety a) 9 watts LED bulb

Supply and fixing of 4' long 18 W Crystal Glass LED tube Light with ISI mark

Supply and fixing of LED Street lighting luminaries suitable for fixing following watts LED lamp b) 25watts LED lamp

Supply and fixing of LED Flood Light 150W with Integrated Driver higher end

Run off main with 2 wires of 2.5 sq.mm. PVC insulated single core multistrand fire retardant flexible copper cable with ISI mark

Run of 2 Wires of 4 sqmm PVC insulated single core multi strand fire retardant flexible copper cable

Supply and fixing of 20A Flush type Wall Socket 32A DP MCB complete set for AC Plug in flush with wall with earth connection (For AC Plug)

Suplly and erection of 125 Amps Capacity floor mounting panel board (Cubical type)

Supplying and laying of 8 SWG GI wire on wall below ground levels with necessary ‘U’ Nails, earth work excavation and refilling etc

Supply and fixing of 24W LED 4000K 2 x 2 Square Type Recessed light Fitting

Supplying and laying of following PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 m putting 0.15m layer a) 2 core 6 sq.mm.

i) 3.5 core 70 sq.mm.

j) 3.5 core 120 sq.mm.

Supply and Laying of following sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good. a) 3.5 core x 120mm

Supply and fixing of triple pole and neutral 4 way 7 segment 3 tier compartmental type MCB distribution board

Supplying and fixing of brass cable gland suitable for following core and sqmm PVC armoured LTUG cable a) 2 core 6 sq.mm.

i) 3.5 core 70 sq.mm.

j) 3.5 core 120 sq.mm.

Supply and providing cable end termination of following core and sqmm PVC LTUG Aluminium armoured cable i) 3.5 core x 70 sq.mm

j) 3.5 core x 120 sq.mm.

Supply and run of 2 of 8 tin coated copper for earth connections

Supply and clamping of 4 core 2.5 sq.mm PVC sheathed and armoured copper cable

Plate earthing with copper plate of size 600 x 600 x 3 mm as per the ISI specification with an earth electrode of 2.1 mtr class 'B' GI pipe

Supplying. Fabricating and erection of M.S Scheme Name board

Lettering & Numbering Supplying and fixing of Aluminium TNPHC Emblem of following height with approved coloured powder coat in matt finishing a) 30"

Supplying and fixing of following dia plastic foam plate of 3mm thick with 3"height number with approved colours etc b) 8" dia

Supply and fixing of following size plastic foam name plate with vinyl cutting letter with approved colours etc a) 24"x 8"

Providing Cornice Work for Gyp Board False Ceiling

Supply and fixing 8mm thick Calcium Silicate Board Designed and Perforated for False Ceiling

Supply and fixing of 80W LED out door focus light fittings of best approved quality and variety with necessary fittings

Supply, installation, testing and commissioning of 58.5 KVA Diesel Generator set complete with all accessories

Supply and Insulation for the residential silencer (supply of residential silencer is included under item for DG Sets)

Supply and installation of M.S. cable adopter box (made of 14 SWG sheet steel) with suitable copper bus extension link from alternator.

Supply and installation of MS exhaust pipe of suitable thickness with 100mm dia upto 5m from the silencer

Supply and insulation of exhaust pipe thermal insulation lagging with mineral wool as per IS 3677 / 1973 reinforced with chicken mesh and cladded with aluminium sheet of 26 SWG and 50mm thick with 64 Kg/Cu. Mtr. Density.

Supply and installation of stainless steel rain hood / rain cap / bend at top of the exhaust pipe to prevent rain water entry to exhaust pipe with provision of drain plug in the system.

Preparation of necessary drawings for approval by Chief Electrical Inspector to Government / CEA, obtain approval for the same, arrange for the inspection by the Electrical Inspectorate / CEA Officials and obtain safety certificate from them for commissioning the DG set

Supply and fixing Co2 type (2Kg) fire extinguisher new seamless cylinder with powder coated finish, made out of Manganese steel with initial fills, hose, wall brackets, nuts, bolts etc as complete with ISI mark confirming to IS: 2878

DRY CHEMICAL POWDER TYPE Supply and fixing of dry chemical powder type (ABC Type) of 6 Kg capacity, Pressurized with nitrogen, mfgd to IS:13849 with ISI mark

Supply and fixing of 6 way Horizontal Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 No 63 A 4 P MCB as incoming and 18 Nos 6A to 32A SP MCB as outgoing on wall with Earth connection only.

Please Enable Macros to View BoQ information