PROVN OF TOILET BLOCK IN DOG UNIT SPL REP TO 26 BY 4 MGSF BLDG NO 15 THIMMAYA AND ROOF TREATMENT IN QTR NO 12 BY 3 KB ROAD IN AGE BR I AREA UNDER GE WEST LUCKNOW

Amount

Excavating in trenches, n exc1.5 m wide and n. exc. 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n. exc. 10 sq m on plan and n. exc. 1.5 m in depth and getting out in hard/dense soil complete as directed.

M & L for Cement concrete 1:4:8 type D-2(40 mm graded stone aggregate) in foundations, filling and mass concrete complete as directed.

M & L for brick work with fly ash bricks straight or curved on plan exc. 6m mean radius in CM 1:6 complete as directed.

M & L for brick work with fly ash bricks (old size) straight or curved on plan exc. 6m mean radius in CM 1:4 as in half brick thick complete as directed.

M & L for 40 mm thick Cement concrete 1:2:4 type B-0 using 12.5mm gradred stone aggregate as in Damp proof course to horizontal or vertical surfaces with using water proofing compound including necessary formwork complete all as specified and directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc. 25 cm. of hard/dense soil complete all as specified and directed.

Labour only for soil filling in floors or paving’s, laid in layers n exc. 15 cm thick, spread, leveled and rammed including watering complete all as specified and directed.

Removing excavated soil n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.

Formwork to flat soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick complete all as specified and directed.

Formwork for Rough finished surface of concrete to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n. exc. 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc. 5cm but n exc. 10cm wide complete all as specified and directed.

Formwork for Rough finished surface of concrete to sides and soffits of floor or roof beams, beam hunching, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc complete all as specified and directed.

M & L for Reinforced cement concrete (Design mix) M-25 (20 mm graded stone aggregate) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M & L for Reinforced cement concrete (Design mix) M-25 (20 mm graded stone aggregate) in Beams, cantilevers, bressummers, lintels complete all as specified and directed.

M & L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M & L for Mild steel TMT bars 6 to 8 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M & L for Mild steel TMT bars but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M & L for cutting and chasing in brick wall for concealed GI tubing and making good in CM 1:4 n.exc 10 cm in girth complete all as specified and directed.

S & F Galvanized iron pipe, 20mm bore, medium grade, with all fittings & fixed complete to walls and ceiling or laid in floors all as specified and directed.(cutting chase for concealing of pipe shall be measured separately) all as specified and directed.

S & F Galvanized iron pipe, 15mm bore, medium grade, with all fittings & fixed complete to walls and ceiling or laid in floors all as specified and directed.(cutting chase for concealing of pipe shall be measured separately) all as specified and directed.

Surface Excavation not exceeding 30 cm deep and averaging 7.5 cm deep and getting out in soft/ loose soil complete all as specified and as directed.

M & L for hard core of broken stone or boulder of gauge not exceeding 63 mm, deposited, spread and levelled in layers not exceeding 15cm thick watered and rammed to a true surface complete including filling interstices with approved fine material like earth or grit etc. complete all as specified and directed.

M & L for 75 mm thick cement concrete 1:4:8 type D2 (using 40 mm graded stone aggregate) as in sub base complete all as specified and as directed.

M & L for 75 mm thick cement concrete 1:3:6 type C1 (using 20 mm graded stone aggregate) with finishing cement concrete even and smooth as in plinth protection complete all as specified and as directed.

M & L for Coloured Non -Skid Ceramic tiles 7 to 8 mm thick, area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floor etc set and jointed in neat cement slurry & pointed in coloured cement to match the surface over and including 15 mm thick screed bed in cement mortar (1:4) complete all as specified and directed.

M & L for coloured glazed ceramic tiles 300 x 450 x 6-7 mm thick on vertical surfaces such as skirting/dado set and jointed with cement paste and pointed with coloured cement to match the shade of tile including 10mm thick backing coat in CM (1:4) complete all as specified and directed.

S & F PVC (SWR) 'P’ trap (110/110mm ) complete all as specified and directed.

S & F 110mm PVC SWR pipes single socketed in any length with rubber ring joints, laid in trenches or in floor complete all as specified and directed.

S & F PVC (SWR) junction single, (Single T) 110 mm dia equal or unequal complete all as specified and directed.

S & F 75mm PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floor complete all as specified and directed.

S & F PVC (SWR) cowl 75mm dia all as specified and directed.

S & F 75mm dia PVC Floor trap including grating fixed in floor with cement all as specified and directed at site complete all as specified and directed.

S & F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.

S & F PVC (SWR) bends any 75 mm dia with access door complete all as specified and directed.

S & F 75 x 50mm single rebated factory made, 100% solid WPC (Wood Polymer Composite) paintable door frame made from 100% lead free (Single Extruded Process) material with density not less than 780 kg/Cu m all as specified and directed. Note : (a) Door frame shall be water proof, termite proof, fire retardant and having excellent screw holding capacity. (b) Rate for this item includes Material and labour for fixing of frame with minimum 06 Nos of hold fasts/Dash through bolts of suitable size as directed by Engineer-in-Charge.

S & F 28 mm thick factory made 100% solid PVC flush shutter made from co-extruded three layer rigid foam sheet (Single extruded) with 0.8 to 1mm thick outer face layer having density not less than 1400 kg/cu m and density of central core not less than 600 kg/cu m, manufactured by an ISO 9001-2015 certified company all as specified and directed.

M & L for Providing, cement concrete 1:2:4 Type B1 using 20 mm graded stone aggregates as in lintels up to 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings up to 60 cm in height, copings, kneelers, apex stones, bed plates, hold fast blocks, Krebs etc all as specified and directed.

S & F Steel ventilator with top hung shutter in two parts, bottom portion for glazing and top portion for wire mesh, including hinges, steel peg stay, complete all as specified.

S & F 100 mm size Butt hinges, stainless steel "medium weight".complete all as specified.

S & F alumunium handle fabricated type anodized 150mm long as directed.

S & F 200mm long alumunium anodized barrel tower bolts of extruded section as directed.

S & F Aluminium alloy, anodized, sliding door bolt 250mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

M&L 15 mm thick rendering in CM (1:6 ) on fair faces of brick wall or concrete surfaces finished fair and even all as specified.

M & L 10 mm thick rendering in CM (1:4) on fair faces of brick ceiling or concrete surfaces finished fair and even all as specified.

M & L for forming drip course in CM 1:4 of section/size exc. 10 Sqcm but n.exc 25sqcm complete all as specified.

M & L for 15mm thick rendering on other than fair faces of brick work in CM 1:4 including using integral water proofing compound finished even and fair complete all as specified. NOTE- WPC shall be measured & paid separetly.

Supply only integral water proofing compound conform to the requirements of IS 2645: 2003 complete all as specified.

S & F vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including provision of lime concrete bedding complete all as specified and directed.

S & F 10 liters capacity PVC valve less, symphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and connections to pipes and fixing of chain and pull, or lever, if any complete all as specified and directed at site.

S & F Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and directed at site.

S & F Vitreous china urinal partition white of size 310x700 mm, partitions slabs terminating about 40cm above floor line complete all as specified and directed at site.

S & F Vitreous China wash basin, white, flat back, size 630x450mm excluding ditto but including brackets, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified and directed at site.

S & F CP bib taps 15mm fancy type Chromium Plated cast copper alloy with crutch or butterfly handle complete all as specified.

S & F Pillar taps, cast copper alloy, with fancy type, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe 15 mm bore and fixed complete all as specified and directed at site.

S & F Angle valve cast copper alloy with capstan head chromium plated screwed down high pressure with long shanks and fly nuts screwed for 15mm bore pipe complete as specified.

S & F CP shower rose fancy type 125mm size with or without swivel joints any size including fixed to steel pipe or union complete all as specified and directed.

S & F stop valve 15mm bore cast copper alloy screwed down high pressure chromium plated with long shank and cup concealed type complete all as specified and directed.

S & F Brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

S & F stainless steel peg sets consisting 06 Nos of pegs of approved quality complete all as specified and directed.

M & L for 100 mm thick cement concrete 1:2:4 type B1(20mm graded stone aggregate) at roof top for bed of water tank complete all as specified and directed.

S & F Gun-metal, globe or gate valves 20mm with iron wheel head, screwed both ends for iron pipe all as specified .

S & F Rotational moulded double layered polyethylene water storage tank cylindrical, hoisted & fixed in position all as specified capacity 1000 ltrs complete all as specified and directed.

S & F 20mm dia ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball & fixed complete all as specified and directed.

M & L for preparation of newly plastered wall surfaces and applying three coats of white wash complete all as specified and directed.

M & L for preparation of newly plastered wall surfaces and applying three coats of white wash on ceiling complete all as specified and directed.

M & L for preparation of New plastered surface of walls and applying two coat of cement based paint over a coat of white cement primer.

M & L for preparation of old/New steel surface of any description exceeding 10cm width or girth and applying two coats of synthetic enamel paint complete as directed.

M & L for provn of roof treatment with polymeric water proofing membrane all as given below :- (a) M & L for plastering 10mm in CM 1:4 using 100% course sand on roof including WPC as per manufacturer's instructions. (b) Applying a coat of oil base bituminous primer @ 0.25 Iitres/sqm and allow to dry. (c) (c) Applying and laying 3mm thick APP Membrane having Non- woven Polyester Matt at center core and covered with high quality polymeric asphaltic protected with thermo fusible HMHDPE film on both side and over laps 10 cm and sealed by flame with 15 Cm longitudinal and travers direction respectively and sealing alloverlaps complete including treatment at all junctions and corners. the menbrane shall be torched in to grooves on vertical planes and grooves sealed with cement mortar 1:3.. . (e) M & L for two coats of aliuminium paint over bituminous surface all as specified and directed.

M & L for salt glazed stone ware drain pipes laid in trenches and jointed and tested for 150 mm bore of pipe complete all as specified and directed.

M & L for cement concrete bed 1:3:6 type C-2 using 40mm stone aggregate to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; in complete all as specified and directed.

M & L for Cement concrete 1:2:4 type B-2 using 40 mm graded stone aggregate in surface channels and drains complete all as specified and directed.

M & L for Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc. complete all as specified and directed.

M & L for Providing Precast Cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate in cover slab (for manholes etc) set in CM 1:4 complete all as specified and directed.

M & L for Construction of septic tank including excavation and earth work in ordinary soil, foundation in PCC 1:2:4, brick work in CM 1:4, RCC slab in M-25 grade including manhole cover having 6mm plate and angle iron frame (50x50x6mm) embedded all around, CI vent pipe 75mm bore with CI cowl vent, shaft and sludge chambers etc. complete for 50 users as shown in Drawing No. Drg No.CELZ TD-217 seet 1/2 and 2/2, complete all as specified and directed at site. directed. Note :- Depth of septic tank shall be the effective depth i.e, below invert level of sewage line at well.

M & L for Construction of soakage well including excavation and earth work in ordinary soil, Foundation in PCC 1:3:6, honey combed and solid brick wall in CM 1:4, RCC slab in M-25, filling with brick ballast and man hole with cover made out of angle iron (50x 50x6mm) frame and 6 mm steel plate, CI vent pipe 1800mm hight with 75 mm dia complete of size 2.4 M dia X 3.0 M effective depth all as shown in Drawing No. CELZ TD-576 sheet 1/2 &2/2 complete all as specified and directed.Note :- Depth of well shall be the effective depth i.e, below invert level of sewage line at well.

M & L for Machine pressed precast conctete interlocking rubber moulded paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade incl 30mm thick sand cushion and joint filled with fine sand including leveling tamping & sweeping etc as per SI 15658: 2006 over 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

M & L for Filleting in any position and to any shape in cement mortar 1:4 including all mitres, stops, etc. exc 50 but n.exc 100 sqcm in section including excavation and earth work complete.

Demolition of brick work built in CM including all quions, arches, pillars etc complete all as specified and directed.

M & L for brick work with sub class "B" burnt brick (old size) straight or curved on plan exc. 6m mean radius built in CM 1:6 completed all as specified and directed.

M & L for brick work with sub class "B" burnt brick (old size) straight or curved on plan to any radius in half brick thick walls built in CM 1.4 complete all as specified and directed.

Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing and removing serviceable tiles to store yard and rubbish off the premises as directed

Roughening surfaces of old concrete floor by picking, sweeping clean, washing down with water to remove dust etc compete all as specified.

M & L for coloured vitrified ceramic tiles, light shade of size 600x600x8-10mm thick as in floor, set and jointed in neat cement slurry and pointed in coloured cement to match the surface over and including screed bed or bedding layer 15mm thick in cement mortar 1:4 complete all as specified and directed.

Ditto all as per item No-86 above but as in vertical surfaces as in dado/skirting with and including 10mm thick backing coat in CM 1:4 complete all as specified and directed.

M & L for 18-20mm thick granite stone slab as in cooking platform, window cill over 15mm thick screed bed in CM 1:4 including cutting, polishing & rubbing and including rounding of exposed edges complete all as specified and directed.

M & L for 18-20mm thick granite stone slab as in shelves in cupboards including cutting, polishing & rubbing top surface and including rounding of exposed edges complete all as specified and directed.

M & L for 18-20mm thick granite stone slab as in partition in cupboards including cutting, rubbing and polishing both side and rounding of exposed edges complete all as specified and directed.

M & L for drilling through holes in granite stone for pipes etc not exc. 25 mm dia complete all as specified.

S & F PVC (SWR) bends any radius 110mm dia complete all as specified..

S & F in repair PVC Grating doom 100 mm dia with waste hole complete all as specified.

Supply and fixed in repair vitreous china wash hand basin white flat back size 550x400mm including 02 Nos angle iron bracket 40x40x5mm, CP waste coupling and 32mm dia waste pipe of suitable lengh with socket, complete all as specified and directed. Make- Cera/Parryware/Hindware.

S & F in repair vitreous china wash down water closet (pedestal pattern) pan white with “P” or “S” trap including connection to drain or outgoing pipe and to syphonage pipe complete all as specified and directed. Make- Cera/Parryware/Hindware.

S & F in repairs cast copper alloy bib taps chromium plated 15mm bore pipe with captain head complete all as specified and directed. Make-L&K/Plumber /ARK

S & F in repair Angle valve cast copper alloy with capstan head chromium plated screwed down, high pressure with long shanks and fly nuts screwed for 15mm bore pipe complete as specified and directed. Make-L&K/Plumber /ARK

S & F in repair CP shower rose fancy type with or without swivel joints of size 125mm dia including fixing to steel pipe or union as directed.Make-L&K/Plumber /ARK

S & F in repair CP brass soap dish fancy type of one soap fixed with screw to wall as directed.

S & F in repair PVC flushing cistern 10 Ltrs capacity including all fitting flush pipe etc complete all as specified

S & F in repair 15mm bore PVC connection 450mm long with brass/PVC coupling and washer as directed. Make- Prayag

S & F in repair CP Brass Tabular Towel Rail, 12mm dia D type 60cm long between flanges complete set of superior quality. Make-L&K/Plumber /ARK

S & F in repair sink with drainage board size 1145x510 mm, bowl size 560x410x200 mm made of stainless steel sheet 1.00mm thick with plugs, washers and wastes pipe & coupling etc incl bedding in cement mortar to draft wall or cantilever brackets and connection union to pipe complete all as specified and directed.

Dismantling water tanks of capacity exc. 250 & n.exc 500 Ltrs complete all as specified and directed at site.

S & F Gun-metal, globe or gate valves 15mm with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) n.exc 1.50 Sqm and removing from sites directed.

All as item No 104 above but exc. 1.5Sqm but n.exc 4 Sqm Each complete all as specified and directed.

S & F Pressed steel frames size 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified, supplied and fixed complete all as specified and directed.

S & F Pressed steel frames 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified, supplied and fixed complete all as specified and directed.

M & L PCC type B-0 1:2:4 (12.5 mm graded stone aggregate) for filling in pressed steel frame etc, rounded or chamfered on edges complete all as specified and directed.

S & F 30mm thick flush shutter, solid core construction with block board core and ply wood panels commercial type on both side complete all as specified and directed.

S & F 35mm thick second class hard wood glazed and skeleton door shutters, open rebated and prepared to receive glass, gauge etc (divided into panels with plain sash bars any numbers) edges of framing plain, chamfered or rounded all as specified under 8.20(a) of SSR Pt-I.

S & F Mild steel framed work such as grills, grating, framed guard bars and similar work conforming to Fe 290 Gde E -165 complete all as specified and directed.

S & F Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogeneous fine cellular structure having smooth outer integral skin with suitable metal stiffener and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing. (Note:- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life)

S & F Factory made solid PVC profiled panel door/cupboard/ cabinet shutter 28mm thick with integral skin as frame & 3mm thick high pressure compact laminate on both side of approved colour as infill, with 'C' type GI or 40 x 20 x 19 of MS pipe as stiffener & supplying & fixing in frame at site as per specifications & drawing.

S & F Anodized Aluminium frame for doors, windows, ventilator with one or more rebates including jointing cleat for fixing etc, complete all as specified and directed.

S & F anodized Aluminum glazed window shutter top hung type, using aluminium section 65x38x1.25 to 1.5mm thick, including 4mm thick pin headed/tinted glass, screw, jointing cleats, rubber packing, Aluminium snap beading including 01 No Aluminium tower bolt 100mm long, 1 Nos Aluminium handle 100 mm long, 02 No 100 mm long Aluminium hinges B-21 type in each shutter etc complete all as specified and directed.

S & F anodized Aluminium window shutter top hung type using aluminium section 65x38x1.25 to 1.5mm thick including stainless steel wire cloth 0.36mm dia of wire and average width of aperture 1.4mm, fixed with screw, jointing cleats, rubber packing, Aluminium snap beading including 01 No Aluminium tower bolt 100mm long, 01 Nos Aluminium handle 100 mm long, 02 No 100 mm long Aluminium hinges B-21 type of each shutter etc complete all as specified and directed.

S & F Anodized aluminium window and ventilator shutters, fixed type without sash bar using Aluminium section 65x38x1.25 to 1.5mm thick including 4 mm thick pin headed/tinted glass, screw, jointing cleats, rubber packing, Aluminium snap beading, complete all as specified and directed.

S & F anodised Aluminium three track sliding type glazed window shutters with 4mm thick plain sheet glass and stainless steel wire cloth with 0.36 mm dia of wire and average width of aperture 1.4mm) with members of window shutter of section 38x12x1.25 to 1.5 mm and other standard Bombay sliding sections including necessary fiber wheel rollers suitable handles to facilitate sliding and all necessary jointing cleats, glazing clips, rubber packing, anodized aluminium snap beading, etc all as specified and directed at site. Make of glass :- Modi/Atlu/Swastik. Make of aluminium section ;- Jindal/Hindalco

S & F Aluminium Butt hinges, 100mm size complete all as specified and directed.

S & F 150mm long alumunium anodised barrel tower bolts of extruded section complete all as directed and directed.

Dismantling wall and ceiling boards (fiber, pulp, insulation etc) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed

S & F 18/19 mm thick BWR plywood interior grade both side with commercial face fixed with screwed to timber frame work edge chamfered as complete all as specified and directed.

S & F 0.80 mm thick sunmica/laminator of interior grade with decorative lamination fixed to timber fame work edge chamfered as directed by Engineer-in-Charge complete all as specified and directed.

S & F Continuous (piano) hinges width of flange (when open) 30mm mild steel, bright finish or elecrogalvanised fixed with screw to timber frame work complete all as specified and directed.

S & F 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and as directed.

S & F rubber beading 35 mm wide and fixed to door with nails complete all as directed/specified

S & F stainless steel wire cloth 0.36mm dia of wire and average width of aperture 1.4mm fixed with stainless steel staples or steel/wooden beadings to windows complete all as specified and directed.

S & F 150mm MS ordinary rat tail pattern spring including roller & roller plate complete as directed.

Taking down cement or cement lime plaster, any description, on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc complete

M & L for preparation of old/new surface of wall and applying one coat of birla /JK wall care putty 3mm thick all as specified and directed.

M & L for preparation surface of wall treated with putty and applying two coats of oil bound distemper complete all as specified and directed.

M & L for preparation of new plastered surface of wall and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.

M & L for preparation of surface of old treated wall surfaces and applying a coat of white wash complete all as specified and directed.

M & L for preparation of new plastered ceiling surface and applying three coats of white wash complete all as specified and directed.

M & L for preparation of old treated ceiling surface and applying two coats of white wash complete all as specified and directed.

M & L for preparation of new wood or wood based surface of any description exceeding 10cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M & L preparation of new steel surface of any description exceeding 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer all as specified.

M & L for PCC 1:2:4, type B-0 using 12.5 mm graded stone aggregate as in leveling course, padding of any thickness etc. complete all as specified and directed.

M & L for provn of roof treatment with polymeric water proofing membrane including taking out existing treatment all as given below :- (a) M & L for plastering 10mm in CM 1:4 using 100% course sand on roof including WPC as per manufacturer's instructions. (b) Applying a coat of oil based bituminous primer @ 0.25 Iitres/sqm and allow to dry. (c) Applying and laying 3mm thick APP Membrane having Non- woven Polyester Matt at center core and covered with high quality polymeric asphaltic protected with thermo fusible HMHDPE film on both side and over laps 10 cm and sealed by flame with 15 Cm longitudinal and travers direction respectively and sealing alloverlaps complete including treatment at all junctions and corners. the menbrane shall be torched in to grooves on vertical planes and grooves sealed with cement mortar 1:3. (d) Applying a tack coat of hot blown bitumen of grade 85/25 @ 1.20kg/sqm and spreading clean washed sand 1 Kg /Sqm on bitumen surface . (e) M & L applying cement concrete tiles 25cmx25cmx20mm thick machine pressed , set, jointed and pointed in neat cement slurry as in floors/ tarraces over and including 15mm thick screed bed in CM 1:4 complete all as specified and directed.

M & L for provn of roof treatment with polymeric water proofing membrane including taking out existing treatment all as given below :- (a) M & L for plastering 10mm in CM 1:4 using 100% course sand on roof including WPC as per manufacturer's instructions. (b) Applying a coat of oil base bituminous primer @ 0.25 Iitres/sqm and allow to dry. (c) Applying and laying 3mm thick APP Membrane having Non- woven Polyester Matt at center core and covered with high quality polymeric asphaltic protected with thermo fusible HMHDPE film on both side and over laps 10 cm and sealed by flame with 15 Cm longitudinal and travers direction respectively and sealing alloverlaps complete including treatment at all junctions and corners. the menbrane shall be torched in to grooves on vertical planes and grooves sealed with cement mortar 1:3. (d) M & L for two coats of aliuminium paint over bituminous surface all as specified and directed.

M & L for 20 mm thick rendering on other than fair faces of brick work in CM 1:4 including using integral water proofing compound finished even and fair complete all as specified.NOTE- WPC shall be measured & paid separately..

Supply and fixed in repair single lever basin mixer without popup waste with 450mm long braided hoses complete Make Jaquar cat No KUP - 35011 or equivalent in Marc complete all as specified.

S & F in repair 15 mm bore CP brass wall mixture (three in one) fixed to GI pipe Braided Hose rise and hand shower complete.Make-L&K/Plumber /ARK

S & F in repair CP Brass toilet paper holder with wall hook bracket etc, complete set of superior quality Make.-L&K/Plumber /ARK

S & F in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 550 mm long.Make-Plumber economical series or equivalent of Jaquar or Marc.

S & F in repairs glass corner shelves fancy type 6mm thick 250x250mm size and fixed over CP brass brackets all as specified and directed.

S & F stainless peg sets consisting 06 Nos of pegs of approved quality complete all as specified and as directed.

S & F in repair stainless steel kitchen plate rack made out of 0.63mm thick stainless steel sheet of size 750x600 mm including screws and weight not less than 5.00 Kg complete all as directed. Make : Cobra/Diamond

S&F 50x15 mm size brass magnet door catcher for PVC door shutter complete all as specified and directed.

S & F in repair fancy type 18-20mm dia mild steel PVC coated curtain rods of approved shade including bracket/ junctions/wall to wall and pair of decorative finial caps as approved complete all as specified and directed..

Supply and fixed in repair Hand shower(Health faucet) with 8mm dia, 1.2mtr long flexible tube and wall hook with NRV (back flow preventer) Make: Jaquar cat No ALD-577, 579 or equivalent in Marc complete all as specified.

Taking down steel tubing and connections and fittings 15mm bore including cleaning for re-fixing or removing from site complete all as specified and directed.

Taking down steel tubing and connections and fittings 20mm bore including cleaning for refixing or removing from site complete all as specified and directed.

Taking down eaves Gutters rain water pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc, including cleaning or re-fixing or removal to store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed.

S & F PVC (SWR) bends any radius 110mm dia complete all as specified.

Dismantling water tanks of capacity exc. 500 & n.exc 1000 Ltrs complete all as specified.

S & F PVC rotational moulded over head water storage tank 500 Liters capacity with and including top lid of screwed type all as specified.

M & L for PCC 1:2:4, type B-1 using 20mm graded stone aggregate as benching/coping roof kerb, mud stops rounded or chamfered etc. complete all as specified and directed.

Demolition of Reinforced cement concrete as in ground floors and paving not exceeding 15cm thickness (below or above ground level) complete.

M&L Providing precast reinforced cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in cover slabs (for manholes etc), shelves and similar articles with plain faces including necessary form work/moulds and setting in cement mortar 1:4 complete (reinforcement to be measured separately)

M&L Welded steel wire fabric not exceeding 4 Kg per Sqm in weight, fixed to reinforcement of cover slab or steel members complete.

M&L preparation of old plastered surface of walls and applying two coat of cement based paint complete all as specified.

Demolition of cement concrete (unreinforced) as in padding above ground floors and paving not exceeding 15cm thickness ( above ground level) complete.

M&L PCC 1:2:4 type B-1 (using 12.5mm graded stone aggregate) as in padding on roof surface for correcting/ making proper slope on roof, surface finished fair and even without using extra cement complete all as specified and directed at site.

M&L filleting in any position and any shape exc. 25 Sqcm and n. exc. 50 Sqcm in CM 1:3 including all miters stop etc complete all as specified and directed at site.

M & L for cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified.

M&L preparation of surface of wall/chajjas/facias and applying a coat of TAPECRETE P-151 aceylic polymer modified cementatious slurry consisting of one part of TAPECRETE P-151and two part of cement by weight , the coating shall be allowed to dry 4-6 hrs complete all as specified.

Point wiring complete with 1.5 Sqmm PVC (FRLS) insulated stranded copper conductor single core cable drawn through rigid non metalic concealed PVC conduit and conduit accessories fixed on surface of walls/ceiling pressed steel terminal boxes not less than 1.6 mm thick concealed in wall duly painted with two coat of black bituminous paint over a coat of red oxide primer plastic laminated top sheet cover 3 mm thick of required size and colour for housing switches, and sockets 1.5 Sqmm PVC insulated (green insulation copper conductor) earth continuity cable drawn with wiring and connected to common earth dolly all as specified . (a) One light/ fan point controlled by one switch

(b) One socket out let point 5 Amp on an independent board complete all as specified.

(c) Same as item No 172 (b) but on the same board complete all as specified.

S& F in repair sheet metal enclosures with socket plug top and MCBs with a two pin and earth plug and socket complete with one singel pole MCB 20 Amp complete all as specified

&F switch piano flush button single pole one way 5 Amp 240 volt complete as directed. (Make: Anchor Penta/SSK)

S&F ceiling rose surface Bakelite three terminal complete as directed.

S&F socket outlet flush type 5 pin 5 Amp, 240 volts complete as directed.

S&F MCB single pole 6 to 32 Amp 240 volts 10 KA breaking capacity complete as directed. All as per Havells ordering code : DHMCCSPFO06-032, (Make: C&S/Legrand)

Ditto as item No 175 herein before but 40 Amp, 240 volts, single pole & neutral complete as directed. All as per Havells ordering code : DHMCCSNFO40,

S&F in sheet metal enclosure for DB’s when MCB, to be used, SPN, 8 ways double door type 415 volt with 200 Amps rated bus bar made out of 16 Gauge sheet steel double door complete all as specified. (MCB required to be fixed shall be paid for separately under respective items of this Schedule ‘A’)

Supply and fixing in replacement of FTL fittings with LED batten 18 W of size 1200 X40X35 mm complete standard fittings and fixtures including fixing on walls/roofs with fitting arrangement complete all as Havell's Ordering code : REGALBATTENT8UPTO1X22WSSBSWH/ Philips/Crompton Greaves

Supply and fix in repairs ultra bright polycarbonate LED tube light 18 watt with complete standard fittings and fixtures of very high efficiency complete all as specified.

S&F exhaust fan PVC body single phase, 230/240 Volt of size 450 mm sweep 1400 RPM including suitable louvers and making connection with twisted copper flexible wire 23/0.076mm all as specified and directed. Make:-Usha/Crompton/Havells.

M&L for Cutting, opening circular/Rectangular in shape hole on wall for fixing of exhaust fan of size 450 mm sweep incl plastering and making good the disturbed surface surrounding complete all as specified and directed.

S & F in repairs 25 W LED outdoor security/ street light fitting, pressure die cast aluminium alloy for housing (heat sink) for ensure effective thermal management, sturdiness and excellent corrosion resistance, high efficiency long life LED chip, Having IP-66 compliant fixed on building including taking down old light fitting complete all as specified. Make:Havells/Surya/Philips

M&L for sand cushioning to UG cables (8 cm deep before laying of cable and 15cm deep over the cable)

Supply & Laying sub class `B’ bricks old sizes over the HT/LT cable laid flat for protection of cable.

M & L of GI pipe medium grade of 40 mm dia base in trenches/poles/walls for protection of cable including fittings complete all as specified.

Supply & Laying in repairs or passing through pipe, 1100 volt grade heavy duty cable with XLPE insulated Aluminum conductor cable served with an inner sheathing of PVC tape armoured with galvanized steel wire or tape and over all PVC sheathed of 10 Sq mm 2core stranded conductor nominal cross section all as directed by Engr - in - Charge.

M/S Reliance Construction