N I T /1

ITEM NO.: 1 Providing soak pit of size 120cm x 120cm x 120cm including excavating and filling with brick-bats.....(INo42-19, PgNo 275) (STATE SSR) Item Spec: (Bd.V.46, Page No. 576)

ITEM NO.: 2 Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. Beyond the building area & stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. Complete. (Lift upto 3.00m.) By Manual Means.... (INo21-01, PgNo 153) (STATE SSR) Item Spec: (Bd.A.1 Page No. 259)

ITEM NO.: 3 Excavation for foundation in Hard murum and boulders including removing the excavated material upto a distance of 50 metres, beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5 m to 3.0 m.) By Mechanical Means.... (INo21-12, PgNo 154) (STATE SSR) Item Spec: (Bd.A.3 Page No. 259)

ITEM NO.: 4 Providing dry/trap/ granite/quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete.....(INo21-38, PgNo 157) (STATE SSR) Item Spec: (Bd.A. 12 Page No. 264)

ITEM NO.: 5 Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC WITHOUT SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade finely washed).... (INo24-01 NS, PgNo 175) ( STATE SSR) Item Spec: (Bd. E. 1 Page No. 287)

ITEM NO.: 6 Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually striking joints on unexposed faces, raking out joints on exposed faces and watering etc.

ITEM NO.: 7 Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15cm. to 20cm. including watering and compaction etc. complete.....(INo21-37, PgNo 157) (STATE SSR) Item Spec: (Bd.A.11 Page No. 263)

ITEM NO.: 8 Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete....(INo27-05, PgNo 197) (STATE SSR) Item Spec: (Bd.G.5 Page No. 315)

ITEM NO.: 9 Providing and fabricating structural steel work in rolled sections, fixed with connecting plates or angle cleats in main and cross beams, hip and jack rafters, purlins connecting to truss members and the like, as per detailed designs and drawing or as directed including cutting, fabricating, hoisting, erecting, fixing in position, making riveted/ bolted/ welded connections and one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete..... (INo23-02, PgNo 173) (STATE SSR) Item Spec: (Bd.C.3 Page No. 275)

ITEM NO.: 10 Providing and fixing colour coated Zincalume (R) AZ150 (min 150 gms/sq.mt. Total on each side) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness (BMT) (0.5 mm TCT), Hi-strength steel with min. 550 Mpa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% aluminium 43.4% zinc 1.6% silicon) with COLORBOND (R) steel quality super durable polyester paint coat (with inorganic pigment). The paint shall have a total coating thickness of nominal 35 um, comprising of nominal 25 um exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950-1050 mm effective cover width and nominal 25-30 mm deep ribs with subtle square fluting in the five pan at nominal 180-250 mm center-to-center. The end rib shall be designed for anti-capillary groove. & return leg. The feed material should have coil manufacturers product details marked a regular interval. Including fasteners with min. Fastened with min. 25 um Zinc-Tin alloy coated, Hex head, self-drilling screw etc. Complete. (weight of profile 4.52 kg/sqm)....(INo38-34, PgNo 236) (STATE SSR) Item Spec: (As directed by Engineer in charge.)

ITEM NO.: 11 Providing internal cement plaster 12mm thick in single coat in cement mortar 1:5 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete.....(INo32-03, PgNo 209) (STATE SSR) Item Spec: (Bd. L.2 Page No. 368)

ITEM NO.: 12 Providing rough cast cement plaster externally in two coats to concrete, brick or stone masonry surfaces in all positions with base coat of 12 to 15 mm thick in C.M. 1:4 and rough cast treatment 12mm thick in proportion 1:1 1/2:3 including scaffolding and fourteen days curing complete..... (INo32-12, PgNo 209) (STATE SSR) Item Spec: (Bd.L.8 Page No. 370) RA NO.: 7

ITEM NO.: 13 Providing and fixing M-40 grade thick vibrated pull cast or similar type concrete frame with chamfer conforming to I.S. 6524-1983 having 6 mm dia. bars 3 Nos. And stirrups @250 mm c/c and fixing in wall with 6 Nos of hold fast of 12 mm dia bars 500 mm long including primer and oil painting etc, complete) frame size 60 mm x 100 mm..... (INo39-56, PgNo 257) ( STATE SSR) Item Spec: (As directed by engineer-in-charge.)

Page ITEM NO.: 14 Providing and fixing solid core flush door shutter commercial in single leaf 32 mm thick without ventilator commercial type of exterior grade as per detailed drawings with wrought iron hold fast, stainless steel fixtures and fastenings and handles on both sides and finishing with oil painting 3 coats complete..... (INo39-10, PgNo 246) (STATE SSR) Item Spec: (Bd-T-36, Page No. 500)

ITEM NO.: 15 Providing and fixing Orissa type white glazed earthenware 575 mm water closet pan including S trap with earthenware foot rests, cast iron soil and vent pipe upto outside face of the wall 1:2:4 brick bat lime concrete bedding without flushing tank and its accessories etc. complete..... (INo42-30, PgNo 277) ( STATE SSR) Item Spec: (As directed by Engineer in charge.)

ITEM NO.: 16 Providing and fixing white glazed earthenware sink 450mm x 200mm x 300mm including all connection of the G.I. supply and lead waste pipes up to the outside face of the wall, cold water chromium plated screw down bib tap, rolled steel or C.I. brackets, rubber plug with chain and stop tap complete.....(INo41-76, PgNo 273) (STATE SSR) Item Spec: (Bd.V.31 Page No.566)

ITEM NO.: 17 Providing 25 mm to 30 mm thick partition of polished black kadappa stone slab of approved quality including giving required size and shape etc. Fixing in cement mortar 1:3 curing and cement etc. complete. a) One side polish.... (INo33-32, PgNo 216) (STATE SSR) Item Spec: (Bd.M.35 B/P No.393)

ITEM NO.: 18 Providing and laying Antiskid Ceramic tiles of approved quality of size 30 cm x 30 cm and confirming to IS 15622-2006 (Group-B IIA) for antiskid flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing etc. Complete.....(INo33-67, PgNo 220) (STATE SSR) Item Spec: (Bd. M-12 page

ITEM NO.: 19 Providing and laying ceramic tiles having size 30 cm. X 30 cm. For dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. Complete..... (INo33-25, PgNo 215) (STATE SSR) Item Spec: (Bd.M.13 Page No. 386.) RA NO.: 9

ITEM NO.: 20 Providing, laying and fixing P.V.C. pipe of 110 mm. dia. with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.....(INo42-28, PgNo 277) (STATE SSR) Item Spec: (As directed by Engineer in charge.)

ITEM NO.: 21 Providing and fixing 75 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete.... (INo42-51, PgNo 279) (STATE SSR) Item Spec: (As directed by Engineer in charge.)

ITEM NO.: 22 Providing and fixing H.D.P container Syntex or alike one piece moulded water tank made out of high density polythyler and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow pipe inclusive of all tanks capacity between 200 to 1000 liters....(INo42-53, PgNo 280) (STATE SSR) Item Spec: (As directed by engineer-in-charge.)

ITEM NO.: 23 Providing and fixing 10 cm PVC nahani trap with grating etc. complete.....(INo42-67, PgNo 281) (STATE SSR) Item Spec: (BD.V 32 A page 551 and as directed by Engineer in charge)

ITEM NO.: 24 Providing and applying two coats of water proof cement paint of approved manufacture and of approved colour to the plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etc. complete..... (INo35-13, PgNo 224) (STATE SSR) Item Spec: (Bd.0.8 Page No. 406)

ITEM NO.: 25 Providing & applying washable oil-bound 21.000 distemper of approved colour and shade to old & new surfaces in two coats including scaffolding, preparing the surfaces. (excluding the primer coat.) etc. complete.....(INo36-11, PgNo 227) (STATE SSR) Item Spec: (Bd.P.5 Page No. 413)

ITEM NO.: 26 Providing and fixing in position after hoisting, precast 1:2 cement mortar reinforced jali 50 mm thick with 3 mm diameter mild steel bar reinforcement, of approved design on both side, fixing in cement mortar 1:3 and curing complete.....(INo26-46 PgNo 194) (STATE SSR) Item Spec: (Bd. F. 20 Page No. 307)

2. NAME OF SUB WORK - Royalty Charges Estimate ITEM NO.: 1 Royalty Charges for RUBBLE. Rate = Royalty + surcharge (2%) (211.95 + 4.23 = 216.18 Per Cum).... (INo1-J, PgNo 1) (STATE SSR) Item Spec: (As Directed By Engineer Incharge)

ITEM NO.: 2 Royalty Charges for HARD MURUM. Rate = Royalty + surcharge (2%) (211.95 +4.23216.18 Per Cum)....(INo1-A, PgNo 1) (STATE SSR) Item Spec: (As Directed By Engineer Incharge)

3. NAME OF SUB WORK -- Testing Charges Estimate ITEM NO.: 1 CONCRETE Compressive Strength OF C.C. Cube(Set of 3 cubes).....(INo19-VQC, PgNo 584) (STATE SSR) Item Spec: (As per Standard Specification)

Please Enable Macros to View BoQ information