SPECIAL REPAIRS TO BLDG NO P-81 (01 TO 08) AND P-86 (01 TO 04) AT VIJAY LINES OF ARMED STATIC WKSP EME UNDER AGE B/R-I AT GE(N) AHILYANAGAR

Amount

Demolition of brick work or stone/boulder masonary, laid in cement mortar or cement lime mortar complete all as specified.

M&L fly ash bricks, straight or curved on plan n.exc 6m mean radius in cm 1:6 using old size brick complete all as specified.

Taking down cement mortar plastering on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and as directed.

M&L for rendering 15 mm thick on stone masonry surfaces or surface other than fair face of brick-work or on one side of lathing in cement mortar 1:4 complete all as specified and as directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished even and smooth (without using extra cement ) on plastered surface complete all as specified and as directed.

M&L for rendering 5mm thick plaster in CM (1:3) on faces of brick work or concrete on surfaces of ceiling, finished even and smooth without using extra cement complete all as specified and as directed.

Supply and fixing in repairs Gun-metal, globe or gate valves, 20 mm with iron wheel head, screwed both ends for iron pipe and fixed

Taking up or down steel tubing and connections, including cleaning for re-fixinf and removal to store 15 mm dia pipe complete all as specified .

Taking up or down steel tubing and connections, including cleaning for re-fixinf and removal to store 20mm dia pipe complete all as specified .

S&F 15 mm dia tubes medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified.

S&F 20 mm dia tubes medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified.

S&F in repairs 15 mm dia angle Stop valves, cast copper alloy, screwed down, high pressure, fancy type, chromium plated screwed both ends for iron pipe or for unions and fixed complete all as specified.

S&F in repairs 15 mm dia bib taps, cast copper alloy fancy type with chromium plated, screwed for iron pipe or for brass ferrule and fixed complete all as specified.

S&F in repairs 40 mm dia Low density polyethylene pipes ( LDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc complete all as specified.

S&F in repairs chromium plated shower roses with swivel joints 125 mm dia size incl fixing to GI pipe/union fixed in repairs.

S&F in repairs 15 mm dia Pillar taps, cast copper alloy, with capstan heads, chromium plated with fancy type, screwed down high pressure, with or without lettered 'Hot' or ' Cold' with long screwed shanks and flynuts, screwed for iron pipe and fixed complete all as specified.

S&F in repairs soap dish chromium plated and type fixed to plugs with CP brass screw fixed in repairs.

S&F in repairs PVC connections15 mm size with PTMT nuts of length 450 mm complete all as specified.

Supply and fix in repairs tubular towel rail, 20 mm dia, brass chromium plated 60 cm long between flanges including a pair of brackets all as directed.

S&F 75 mm dia PVC ( SWR ) floor trap, plain with grating including jointing with solvent cement complete all as specified.

S&F in repairs Vitreous China corner wash basin, white, flat back, size 400 x 400 mm excluding taps, waste, chain and plug and porcelain stopper but including brackets with 32 mm dia Waste fittings, brass, chromium plated with waste pipe complete all as specified.

S&F in repairs Vitreous china squatting pan, Orissa pattern size 580 x 440 mm white, with integral foot rests ( excluding flushing cistern and flush pipe )Complete all as specified.

S&F 10 Litrs PVC valveless, low level flushing cistern, low level, white with inlet, ball valve, float and handle including brackets with 32 mm dia flush pipe of polyethylene of low or high density or PVC, for low level cistern complete all as specified.

S&F stainless steel plate rack of size 610 x 610 x 254 mm fixed with stainless steel screw including taking out old unserviceable plate rack as approved by GE complete all as specified.

S&F in repairs sinks made of stainless steel 1mm thick kitchen or labortory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 460mm x 405mm x 203 mm& bowl size 405mm x 354mm x 203mm complete all as specified & directed.

Dismantling PVC Pipes with fittings upto 75mm to 110mm dia complete all as specified and directed by Engr-in charge.

S&F for PVC (SWR) pipe 110 mm dia single socketed in any length with rubber ring jointed level fixed to walls complete all as specified and as directed.

S&F for PVC (SWR) pipe 75 mm dia single socketed in any length with rubber ring jointed level fixed to walls complete all as specified and as directed.

S&F for PVC (SWR) bends with access door 110 mm dia complete all as specified and as directed.

Ditto all as per ser item no 30 above but 75 mm dia.

S&F PVC (SWR) plain bend 110 mm dia complete all as specified and as directed.

S&F PVC (SWR) plain bend 75 mm dia complete all as specified and as directed.

S&F PVC (SWR) branch piece single or double T equal or unequal with access door 110 mm dia complete all as specified and as directed.

Ditto all as per ser item no 34 above but 75 mm dia.

S&F PVC (SWR) vent cowl 110 mm dia complete all as specified and as directed.

M&L for special treatment to sunken portion with 10mm thick plaster in CM 1:4 with WPC liquid Conplast 421 and applying one coat each of Nittoproof 100 and Nittoproof 120 on plastered surfaces.rendering again 10mm thick in CM 1:4 mixed with Conplast - 421 filling the sunken floor with PCC 1:5:10 using brick bat area of floor upto 5.00 Sqm including 40 mm dia 0.60 m pipe complete all as specified and as directed.

ditto all as per ser item no 37 above but for kitchen area n exc 3.00 Sqm on plan all as specified and directed.

Dismantling of stone slab and tiles laid bedded and pointed in any mortar description or thickness in floors, apron etc Complete all as specified.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as directed.

Demolition of concrete in ground floors & paving not exc 15cm thickness (below or above ground level) complete all as specified.

M&L for 75 mm thick plain cement concrete 1:4:8 type D2, using 40 mm graded stone aggregate as in sub base all as directed.

M&L for screed bed or bedding layer of mortar 15 mm thick in CM 1:6 for laying floor finishes Complete all as specified.

M&L for Machine cut kota stone slab flooring 20-25mm thick and jointed with grey cement slurry mixed with pigment to match the shade of the slab inclunding rubbing and polishing complete complete all as specified.

M&L for Machine cut kota stone slab 20-25mm thick in riser of steps, skirting, dado,window jambs and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab inclunding rubbing and mirror polishing complete complete all as specified.

M&L for Matt finish coloured ceramic tiles 7 to 8mm thick (Squre / Rectangular) are of each Tile Exc 0.11 Sqm but N exc 0.18 Sqm in floors etc, set jointed and pointed in neat cement slurry and pointed in coloured cement to match in floors complete all as specified.

ditto all as per ser item no 46 above but as a skirting complete all as specified.

M&L for Ceramic Non-skid colouerd tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm,in floors etc.set and jointed in neat cement slurry with and pointed in coloured cement match the colour of tiles all as spd all as specified.

M&L for Glazed ceramic coloured in vertical surface 350x 250x 7 to 8 mm / 450 X 350 X 7 to 8mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including rendering 10 mm thick in CM 1:4 on fair faces of brick or concrete surfaces of wall as in backing of skirting and dado all as specified and as directed.

Fixing only 60 mm thickness, M-35 Grade Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 including taking down old one and 50mm thick sand cusion complete all as spd and as directed.

M&L for Green marble 18- 20 mm thick machine cut, polished, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including griding and polishing types all as specified.

M&L for Machine cut cudappa stone slab 20 - 25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations all as specified.

M&L 75 mm thick cement concrete type C-2, 1:3:6 (Using 40 mm graded aggregate) finishing cement concrete surface even and smooth without using extra cement as in plinth protection including joints and bitumen filling complete all as specified and directed.

Taking down chowkats or frames exc.1.5 sq.m but not exc. 4 sq.m each but with shutters ( without taking off shutters from the frame ) and removing to or from store complete all as specified and as directed.

Taking down steel windows/ventilator n exc 1.5 Sqm,any size with shutters (without taking off shutters from the frames) all as directed.

M&L for re-fixining same opening of shutters of any description exceeding 2 sqm each all as specified and as directed.

S&F 30mm thick flush door shutter soild core construction with block board core and plywood face panels commercial type on both sides .

M&L for 2nd class hardwood as glazed and skeleton shutters 35 mm thk open rebated and prepared to receive glass, gauze, etc (without sash bars ) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutter as specified in SSR Part l, section 8, clause 8.24 ( a ); supplied and fitted to chowkats complete all as specified and as directed.

S&F floor door stopper of aluminium alloy and tongue, anodised with hard drawn steel overall length of cover plate 140mm.as in repairs complete all as specified.

S&F in repair pressed steel frames of size 125mm x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc incl filling in door frames in plain cement concrete, 1:2:4 type B0, using 12.5 mm graded. all as directed.

M&L for second class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified.

M&L for solid PVC door frame of size 50 mm X 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and as directed.

M&L for factory made solid panel PVC door shutter 30 mm thick ( style ) consisting of frame made out of M.S.tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour 'PVC'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and as directed.

S & F powder coated aluminium sliding window, three track shutters, side hung type with sash bars, locking rails, locking arrangements including necessay joinery cleats, glazing clips, rubber packing, Chowkats aluminium snap beading, screws, suitable handle etc with and including sheet glass or ordinary glazing quality of 5mm thick and incl GI wire mesh 0.36 mm nominal dia of wire and average width of aperture 1.18 mm , size of side rails , top rails , bottom rail 85x44.5mm and size of chowkat frame 101.6 x 44.45mm and thickness of aluminium member shall be 1.40mm thick complete all as specified. Note:One aluminium window should be provided with cooler arrangements.

S&F powder coated Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified

S&F in repair 25mm dia Curtain Rod stainless steel, chromium plated with fixing SS brackets, SS stops, SS rollers etc all as specifed and as directed by Engr-in-Charge. (All materials shall be stainless steel).

S&F 300 mm long, mild steel ordinary rat rail springs including roller and roller plate complete and taking down old one all as specified and as directed.

S&F continuous (piano) hinges, mild steel, bright finish or electrogalvanised width of flap (when open) in 30mm all as specified.

S&F 150 mmAluminium anodised Hasp and staple, safety type, withl hinge pin including bolt to hinge plate and fixed with screws

S&F Ball catches with 8mm dia steel ball and brass body and striking plate including letting in and fixing complete all as specified.

S&F 18/19 mm thick Plywood BWR type BB, fixed with screws to timber frame work all as specified and directed.

M&L for decorative laminate type I,of surface finish ,colour and pattern as approved fixed with approved adhesive as per maker's instruction, 0.9mm thick laminate

S & F Butt hinges, medium weight, cold rolled mild steel, and fixed 100 mm length complete all as specified.

S & F Butt hinges, medium weight, stainless steel, and fixed 100 mm length complete all as specified.

S & F Aluminium handles, cast type, anodised handle 150 mm complete all as specified.

S & F Aluminium, anodised, barrel tower bolts, of extruded section and fixed 150 mm complete all as specified.

S & F 250mm aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type ) and fixing clip of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified.

S & F Mild steel as hold fasts Fe.290.Gde-E-165 complete all as specified.

S&F framed work such as grills, gratings, etc with ends of bars, shouldered and /or riveted, or forged into spicks, framed guard bars, ladders, framed balusters, walk ways, railings, framework of water tank and similar work conforming to Fe 410-O all as specified.

M&L for preparing old decorative plastered surface of walls by removal of existing treatment washing rubbing down and applying two coats of distemper oil emulsion oover a coat of chalk whiting primer over one coats of care wall 1.5mm thk putty all as specified and directed by engr-in-charge.

M&L for preparing newly plastered surface of walls washing rubbing down and applying two coats of distemper oil emulsion oover a coat of chalk whiting primer over one coats of care wall 1.5mm thk putty all as specified and directed by engr-in-charge.

M&L for preparing old surfaces of ceiling, and applying two coats of white wash complete all as specified and directed.

M&L for preparing new plastered or unplastered surfaces of ceiling, and applying three coats of white wash complete all as specified and directed.

M&L for preparing Old / New surfaces of walls applying two or more coat of smartcare Damp proof advance water proof paint (Approved colour) Asian or equivalent including primer and scafolding at any height complete all as specified and directed by Enggineer-in-charge.

M&L for preparation of old painted wood & wood based surfaces of any description, not otherwise described over 10cm width or girth and evenly applying one coat on synthetic enamel paint complete all as specified and as directed.

ditto all as per ser item No. 86 above but on steel & Iron surfaces.

M&L for Two coat of synthetic enamel paint on wooden surface over a coat of pink primer including preparation of new surfaces of any description, not otherwise described, over 10 cm width or girth complete all as specified.

M&L for two coats of synthetic enamel paint over priming with red oxide over preparation on new surfaces of any description over 10 cm width or girth complete all as specified and as directed.

Taking down carefully copper/aluminum point wiring (light/fan/bell/socket, power point etc) complete, including fixture and fitting such as switches, ceilling roses, pendants, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per condition seperately) and making good disturbed surfases of walls, floors etc complete all as specified and directed Engineer-in-Charge.

M&L for point wiring complete on surface of wall (open) type with two runs of 1.5 sq mm for phase and neutral single core multistranded copper conductor of 1100 volts grade PVC insulated and unsheathed FRLSH cable drawn in and incl PVC Casing and capping ISI Marked with its accessories PVC boxes (upto 12 module suitble for Mylinc series of Legrand including white plates with frame upto 12 module of make suitable for Mylinc Series ) for fixing switches/socket/regulators etc incl 1.5 sq mm single core multistranded copper conductor of 1100 volts grade PVC insulated and unsheathed FRLSH cable as earth continuity conductor to common earth & connecting to earth dolly for the following, all as specified and directed. Note : 1. Proper colour coding shall be adopted for wiring (For Phase- Red, Yellow, Blue, For Earth - Green and For Neutral- Black) 2.Wiring shall be done as per complaints recd from user only on required basis it is not necessary to do whole wiring of any whole bldg 3. All points are required to earthed upto fixtures i.e. Holders, Tube lights, Wall lights, ceiling lights, bulkhead lights, bldg security light etc

One light point controlled by switch 5 Amp single pole one way

One fan point controlled by switch 5 Amp single pole one way

One bell point controlled by switch 5 Amp single pole one way

One 3 pin 5 Amp socket outlet on same board controlled by one, one way 5 Amp switch

One socket outlet 5/3 pin 5 Amp controlled by one switch on independent board

ditto all as per Item No 91 (here-in-before) but with 2.5 Sqmm Copper conductor cable for Phase, Neutral and Earth for one 3 pin, 15 Amp socket outlet on independent board

S&F in replacement Modular Switch, 6 Amp, one way, one Module as per existing. etc complete all as specified and directed by Engineer-in-Charge

S&F in replacement Modular Switch, 16 Amp, one way, one Module as per existing. etc complete all as specified and directed by Engineer-in-Charge

S&F Modular Socket Outlet 6 Amp, 3 pin, combined two module etc complete all as specified and directed by Engineer-in-Charge.

S&F Modular Socket Outlet 6 Amp / 16 Amp - 2/3 pin combined two module etc complete all as specified and directed by Engineer-in-Charge

S&F Modular fan regulator 2 module all as specified,

S&F Bell Multi Music type all as specified.

Supply & fixing lamp holder (Angular/Straight), insulated body, with back plate for batten fitting etc complete all as specified and directed by Engineer-in-Charge

M&L for ceiling rose 3 terminal / PVC / polycarbonate, isolated body etc complete all as specified and directed by Engineer-in-Charge

S&F in replacement double door Sheet metal enclosures factory made Vertical DBs Concealed in Wall 4 way TPN, 415 volts ,protection class IP-42, including 100 Amps MCCBs suitable for fixing of MCBs, etc, confirming As per IEC 61439-3 ,Suitable for Flush Mounting and Surface Mounting, With 100 A Copper Busbar ,With Neutral bar, Earthbar and Cable ties for Cable management,Fully shrouded Neutral bars, Prefitted masking sheet complete all as specified and as directed.

S&F in replacement double door Sheet metal enclosures factory made DBs SPN, 8 way, 240 volts, protection class IP-42, suitable for fixing of MCBs, Isolators etc, confirming As per IEC 61439-3, Suitable for Flush Mounting and Surface Mounting, With 100 A Copper Busbar, With Neutral bar, Earthbar and Cable ties for Cable management, Fully shrouded Neutral bars, Prefitted masking sheet complete all as specified and as directed.

Supply & fixing MCB, SP, AC, 240 Volts of 06 to 40 Amp capacity 16 KA, 'C' series and making connections with suitable size of copper lugs etc complete all as specified and directed by Engineer-in-Charge

Supply & fixing MCBs, SPN, AC, 240 volts of 40 Amps capacity 16 KA, 'C' series and making connections with suitable size of copper lugs etc complete all as specified and directed by Engineer-in-Charge.

Supply and fix ultra slim square profile LED lighting fixture with extruded Aluminium housing, environmental friendly, energy efficient ready to use pack LED Tube light fitiing 20 Watt with LED light source 6500 K with uniform light output, with all accessories including its connection with and including 2 core sheathed copper conductor cable of size 0.5 Sqmm with complete with all accessories etc complete all as specified and directed by Engineer-in-Charge

S&F sub main wiring with two single core PVC insulated,unsheathed, FRLSH stranded copper conductor cable 4 Sqmm with 4 Sqmm PVC insulated, unsheathed, FRLSH stranded copper conductor cable as earth wire drawn through and including PVC Casing and capping ISI Marked with its all necessary accessories and earth wire connected to common earth dolly etc complete all as specified and directed by Engineer-in-Charge . Note : 1. Proper colour coding shall be adopted for wiring (For Phase- Red, Yellow, Blue, For Earth - Green and For Neutral- Black) 2. Two run of 4 Sqmm cable i.e for one run for phase, one run for neutral with one run of 4 Sqmm cable for earth and one run of PVC Casing & caping shall be measured as one unit.

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 200mm.

M&L for earthing complete with galvanised steel earth plate electrode 600x600x6mm thick burried directly in ground. Earth pit not less than 2.25 m depth and top edge of the earth plate not less than 1.5 m below normal ground level connected to galvanised earth lead wire 4.0 mm dia by means of nuts, bolts & washer etc. Earth wire connected upto main earth point / DBs alongwith 15mm dia earth protection pipe from top edge of the earth plate to main earth point to be connected and 20mm dia watering pipe light grade with funnel and provn of PCC using cement concrete (1:2:4) mix type B1 using granded stone aggregate and RCC pit cover 50 mm thick precost RCC (1:2:4) mix type B1 duly reinforced with 8 mm dia of TMT bar @ 100 mm CIC, both way, lifting arrangement complete including all necessary earth work etc complete all as specified and directed by Engineer-in-Charge

AZAD SERVICES (BID ID -3392710)

M/S. Z.K.ENTERPRISES, AHMEDNAGAR (BID ID -3389402)

M/s. R. R. ASSOCIATES (BID ID -3389366)

Ms. M.D. Auty (BID ID -3392428)

M/S MAHESHWARI ENTERPRISES (BID ID -3390860)

M/S. M. F. Sharif & Co. (BID ID -3392339)

Priyadeep Construction (BID ID -3391715)

sardar construction (BID ID -3391121)