Loading
Loading…
Loading…
Tender Value
₹7.1 L
EMD Value
₹14,200
Closing Date
9 Jan 2026, 3:30 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (WMS)
Above/Below/Par
FWP
38 conditions · 9 needing a document upload
Compliances as per Tender Document.
Compliances as per Tender Document.
The tenderer(s) shall also submit following documents in support of eligibility criteria along with their bids:
The audited balance sheet reflecting financial turnover certified by chartered accountant with her stamp, signature and membership number for the previous three financial years and the current financial year up to the date of opening of tender.
For liquidity workout, the audited balance sheet and/or banking reference certified by chartered accountant with his/her stamp, signature and membership number shall be submitted by the bidder along with bid. Banking reference should contain in clear terms the amount that bank shall be in a position to lend for this work to the applicant/member of the joint Venture/Consortium. In case the Net Current Assets (as seen from the Balance Sheets) are negative, only the Banking references shall be considered. Otherwise the aggregate of the Net Current Assets and submitted Banking references shall be considered for working out the liquidity. The banking reference should be from a Scheduled Bank in India and it should not be more than 3 months old as on date of submission of bids.
The following self-attested (signature, stamp and date on each page) documents shall be submitted by the bidder(s)/tenderer(s) in support of identity, bank, bid cost, EMD and profile details of their firm/company:1. Certificate for GSTN registration 2. EMD (Earnest Money Deposit) receipt 3. Tender Document Cost receipt 4. PAN Card in which PAN is readable 5. Copy of Firm Registration 6. Bank Mandate form (NEFT Details of Bank for payment) 7. Cancelled Cheque of Bank Account 8. Power of attorney or Signatory authorization letter 9. Address, Contact/Mobile Nos. & Email-ids.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
One time repair of Cooling Tower (CT-02) of Chiller Plant and procurement of required spares for the repair.
FWP-Coolingtower-157~MCF
FWP-Coolingtower-157
Single
Works - General
1 Months
Rae Bareli, Uttar Pradesh
₹0
₹14,200
9 Jan 2026
18 Dec 2025
26 Dec 2025
93 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 7,08,469.64 | ||
| — | 1.00 | — | — | ||
| P B2.5X2.5X1/4X3723.5 10-4030-41 GRP | — | — | — | 2,610 | |
| — | 1.00 | — | — | ||
| P B2.5X2.5X1/4X3103.5 10-4030-46 GRP | — | — | — | 2,230 | |
| — | 1.00 | — | — | ||
| P B2.5X2.5X1/4X3660 10-4030-47 GRP | — | — | — | 2,680 | |
| — | 1.00 | — | — | ||
| P B2.5X2.5X1/4X1156.5 10-4030-102 GRP | — | — | — | 850 | |
| — | 3.00 | — | — | ||
| P B2.5X2.5X1/4X1456.5 10-4030-101 GRP | — | — | — | 3,150 | |
| — | 1.00 | — | — | ||
| P B2.5X2.5X1/4X1456,5 10-4030-103 GRP | — | — | — | 1,040 | |
| — | 1.00 | — | — | ||
| P B2.5X2.5X1/4X1156.5 10-4030-108 GRP | — | — | — | 810 | |
| — | 1.00 | — | — | ||
| P B2.5X2.5X1/4X1456.5 10-4030-105 GRP | — | — | — | 920 | |
| — | 15.00 | — | — | ||
| NS 5A NOZZLE 82-42705-120 PP | — | — | — | 6,750 | |
| — | 15.00 | — | — | ||
| DIFFUSION RING 80-4945-1 10.GL PP | — | — | — | 1,500 | |
| — | 1.00 | — | — | ||
| PIPE NIPPLE 20NBX76 MED BSPTBE GI | — | — | — | 50 | |
| — | 1.00 | — | — | ||
| ELBOW 25X20NB 90D BSP GI | — | — | — | 150 | |
| — | 1.00 | — | — | ||
| PIPE NIPPLE 25NBX114 MED BSPTBE GI | — | — | — | 100 | |
| — | 2.00 | — | — | ||
| UNION 25NB BSP FML MEDIUM GI | — | — | — | 500 | |
| — | 1.00 | — | — | ||
| HOSE 1INX75IN P87-4090-173 MS EG | — | — | — | 3,000 | |
| — | 2.00 | — | — | ||
| ELBOW 25NB 90D BSP MED GI | — | — | — | 200 | |
| — | 1.00 | — | — | ||
| PIPE NIPPLE 25NBX225 MED BSPTBE GI | — | — | — | 200 | |
| — | 1.00 | — | — | ||
| TEE 25NB BSP GI | — | — | — | 200 | |
| — | 1.00 | — | — | ||
| PIPE NIPPLE 25NBX240 MED BSPTBE GI | — | — | — | 250 | |
| — | 3.00 | — | — | ||
| PIPE SOCKET 25NB MS HDG | — | — | — | 150 | |
| — | 1.00 | — | — | ||
| PIPE NIPPLE 25NBX200 MED BSPTBE GI | — | — | — | 62 | |
| — | 1.00 | — | — | ||
| DIPSTICK ASSY 0-2322-1 SS304 H/W | — | — | — | 750 | |
| — | 40.00 | — | — | ||
| ELIM PACK TU-15C 82-43017-837 | — | — | — | 86,000 | |
| — | 5.00 | — | — | ||
| LOUVER SUPT 10-2020-1 PP | — | — | — | 750 | |
| — | 6.00 | — | — | ||
| LOUVER 1080X 150X 5 12-2046-1 GRP | — | — | — | 2,520 | |
| — | 20.00 | — | — | ||
| FLAT 4.76X 100X1150 GRP | — | — | — | 5,400 | |
| — | 4.00 | — | — | ||
| LOUVER 1380X 150X 5 12-2046-2 GRP | — | — | — | 2,000 | |
| — | 3.00 | — | — | ||
| CORNER ROLL 3X 50x 65 13-1001-01 GRP | — | — | — | 300 | |
| — | 5.00 | — | — | ||
| CORNER ROLL 3X 50X 65 13-1001-02 GRP | — | — | — | 500 | |
| — | 2.00 | — | — | ||
| FAN CYL SEG 961N 11-4049-1 GRP | — | — | — | 24,000 | |
| — | 4.00 | — | — | ||
| FAN GUARD SEG 96IN P77-233-1 MS HDG | — | — | — | 38,000 | |
| — | 2.00 | — | — | ||
| SEALER-UNI-O-STRIP SPL 0.1/8 X 0.1/2 | — | — | — | 900 | |
| — | 5.00 | — | — | ||
| TAPE FOAM 2MM X 25MM X 5M 25-ADHESIV (Quantity in number of Rolls) | — | — | — | 500 | |
| — | 1.00 | — | — | ||
| SEALENT POLYSULPHIDE TECHSEAL | — | — | — | 750 | |
| — | 20.00 | — | — | ||
| CLEAT 10-2018-1 ACETAL | — | — | — | 1,280 | |
| — | 20.00 | — | — | ||
| CLEAT 10-2018-2 ACETAL | — | — | — | 1,240 | |
| — | 100.00 | — | — | ||
| TAP SCREW NO 8 X 25 IS1363 MS HDG | — | — | — | 800 | |
| — | 1.00 | — | — | ||
| ATTACHING HARDWARE FOR FEPAIR WORK (Quantity in number of Lots) | — | — | — | 15,292 | |
| — | 1.00 | — | — | ||
| MOTOR SUPT PLT 15-2014-3 MS HDG | — | — | — | 534 | |
| — | 1.00 | — | — | ||
| SHIM SET P7-3104-11 SS304 | — | — | — | 1,250 | |
| — | 1.00 | — | — | ||
| SHIM P7-3104-03/12 SS304 | — | — | — | 1,250 | |
| — | 1.00 | — | — | ||
| D/S 6Q CLI 1030 GB1.1/3 MB48 | — | — | — | 30,650 | |
| — | 1.00 | — | — | ||
| FAN ASSY 96IN H-3-84-3193-1 | — | — | — | 1,51,050 | |
| — | 8.00 | — | — | ||
| KIT 6Q NBM INSERT RUBBER BUSH | — | — | — | 7,280 | |
| — | 1.00 | — | — | ||
| Labour charges | — | — | — | 2,00,000 | |
| — | — | — | 1,08,071.64 | ||
| — | GST @ 18% | — | — |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Tenderdocument_2.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .