REPAIR OF JOINERY, PLUMBING WORK AC/GI SHEET AND CERTAIN MISC WORK IN N-4 AND NARENDRA GROUND AT AF STN CHAKERI, KANPUR

Amount

Dismantling floor, heath or wall tiling including cement mortar bedding and removing rubbish from the MD land complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc. , laid over 15mm thick screed bed in cement mortar 1:6 incl joining in neet cement slurry and pointed in coloured cement to match with shade of tiles complete all as specified and directed .

M&L for glazed ceramic tiles coloured of size 300x450mmx 6 to7 mm thick as on walls over and incl 10mm thick rendering in cement mortar (1:4) and jointing in neet slurry and pointing in coloured cement to match the shade of tiles complete all as specified and directed.

Cutting chases on brick wall for concealed water tubing and making good to facings where required and pointing in CM 1:3, cutting n exc 10 CM girth. complete all as specified and directed.

S&F Green marble work 16 to 18mm thick (One pieces ,table rubbed and polished) in cocking platforms and like in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade cutting , polishing and slightly moulding open edge and over 15mm thick screed bed in CM 1:6 etc complete all as specified and directed.

M&L for RCC (1:2:4) type B-1 using 20 mm graded stone aggregate as in platform slab, shelves etc complete all as specified and directed

S&F TMT MS bars 8mm dia and above bars cut to length bent to shape required including cranking bending spirally for hooping for columns and binding with and including ms wire n less than 0.9 mm dia quality complete all as specified and directed.

M&L form work of sides& soffits to shelves & plate forms etc complete all as specified and directed.

M&L for preparation of old decorative plastered surface of ceiling and applying a coat of white wash complete all as specified and directed.

M&L for preparation of old decorative plastered surface of walls and applying a coat of white wash complete all as specified and directed.

M&L for preparation of old decorative plastered surface of walls and applying a coat of oil bound distemper complete all as specified and directed.

M&L complete removal of existing treatment over 1mm thick wall care putty on walls incl preparation of surface and even & smooth by using of sand paper and applying two coat of oil bound distemper over a coat of primer complete all as specified and directed .

M&L for preparation of old wooden surfaces of any description exc 10cm width or girth and applying a coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old steel and iron surfaces of any description exc 10cm girth or width and applying a coat of synthetic enamel paint complete all as specified and directed.

M/F Solid PVC door frame (single rebated of size 60mm x30mm made out of solid PVC foam with homogeneous fine cellular structure having smooth outer integral skin with suitable metal sttifner and fixed with 100x8mm sheet metals screws complete all as specified & shown.

S/F factory made solid PVC profile panel door shutter 28mm thick with integral skin as frame & 3mm thick high pressure compact laminate on both side of approved colour as infill ,with C type GI or 40x20x19 of MS pipe as stiffener& supplying & fixing in frame at site as per specification & drawing

S&F 100 mm size butt hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised complete all as spd & directed.

S&F Aluminium, anodised barrel tower bolt of extruded section of 150mm long complete all as specified

S&F Aluminium handles extruded type ,anodised of 125 mm size complete all as specified

Demolition of cement concrete in ground floors and pavings n.exc. 15cm thick bellow or above ground level including tiles, etc complete all as specified and directed

Demolition of cement concrete( reinforced) of any description and in any position not otherwise provided for all as specified and directed

Demolition of brick work built in Cement Mortar complete all as specified and directed.

M & L for brick work with fly ash bricks straight or curved on plan to any radius in half bricks built in cement mortar (1:4) complete all as specified and as directed.

M&L for brick work with fly ash brick straight or curved on plan exc 6.0 mtr mean radius built in 1:6 cement mortar using of old size bricks complete all as directed

Labour only brick work with sub class 'B' brick straight or curved on plan not exc 6.0 mtr mean radius built in (1:6) cement mortar complete all as specified and as directed by Engr-in-charge.(old serviceable brick obtained from item NO-22)

Taking up or down 15 mm dia old serviceable /unserviceable steel tubing any grade and connection cleaning for re-fixing or removal to store complete all as specified and as directed

Taking up or down 20mm old serviceable/ unserviceable steel tuning any grade and connection including cleaning for removal to store complete all as specified and as directed

S&F in repair steel tubing medium grade ,galvanized with all fitting such as bend ,elbow, socket, tees and fixed complete to wall or in ceiling or in floors including cutting threading and making forged bends on pipes MS hooks etc for 15 mm bore pipes complete all as specified and as directed

S&F in repair steel tubing medium grade ,galvanized with all fitting such as bend ,elbow, socket, tees and fixed complete to wall or in ceiling or in floors including cutting threading and making forged bends on pipes MS hooks etc for 20mm bore pipes complete all as specified and directed.

Re-fixing of 15 mm bore old steel tubing and connection in new or old position fixed in wall or floor ,ceiling etc as directed.

Re-fixing of 20 mm bore old steel tubing and connection in new or old position fixed in wall or floor ,ceiling etc as directed.

Taking down cement plaster on brick or concrete surfaces etc complete all as directed.

M&L for 15mm thick plastering on fair faces of brick wall or concrete surfaces in 1:6 cement mortar as directed

M&L preparation of new plaster surfaces and applying three coat of white wash wash on walls as directed.

M&L for 10mm thick plastering on ceiling or concrete surfaces in 1:6 cement mortar as directed

M&L preparation of new plaster surfaces and applying three coat of white wash wash on ceiling as directed.

S&F in repair of 15 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed(Minimum weight 142 gms).complete all as specified and as directed

S&F in repair of 20 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed(Minimum weight 210 gms).complete all as specified and as directed

S&F in repair 15 mm dia Gun Metal, globe or Gate Valve with Iron wheel head Screwed both ends for Iron Pipe and fixed complete all as specified and as directed

S&F in repair 20 mm dia Gun Metal, globe or Gate Valve with Iron wheel head Screwed both ends for Iron Pipe and fixed complete all as specified and as directed

Dismantling water tanks cap exc 250 Ltr and n exc 500 Ltr complete all as specified and as directed.

S&F 500 ltr rotational moulded polyethylene water storage tanks(cylindrical vertical with closed top) triple layer construction, white colour arrangement to screwed the lid cover, ISI mark hoisted& fixed in position complete all as specified and as directed

S&F 300 ltr rotational moulded polyethylene water storage tanks(cylindrical vertical with closed top) triple layer construction, white colour arrangement to screwed the lid cover ISI mark hoisted& fixed in position all as specified complete all as specified and as directed

S&F in repair vitreous china squatting pan Orissa pattern 580x440mm with integral foot rest “white” with P or S trap (excluding flushing cistern and flush pipe) but including connecting to trap and flush pipe, anti-syphonage pipe etc complete making good to floor and all as specified and directed by Engr-in-charge.

S&F in repairs PVC duo flushing cistern 10 Ltr capacity, low level with inlet ball, float valve, handle, flush pipe Make- Prayag, cat No- 502 or equivalent in Cero/ Essco complete all specified and directed.

S&F in repairs PVC internal kit for flushing cistern 10 Ltr capacity, with inlet ball, float valve, handle complete all as specified and directed.

Repairs to high / low level flushing cistern by adjusting the float valve, leakage PVC connection PVC / GI bend incl replacing of rubber washer cheek nuts plunges/flush etc for any type of flush complete all as specified and directed

S & F in repairs stainless steel kitchen sink with drainage board of over all size 914X460X203 mm and bowl size 405 mm X 354 mm X 203 mm, 1 mm thick with plug washers and wastes ; including bedding in CM to dwarf wall or including fixing cantilever brackets , waste pipe and connecting union to pipe complete all as specified and as directed

S & F in repairs vitreous china wash hand basin, white, flat back, size 550 X 400 mm excluding taps, wash, chain and plug and procelain stopper but including brackets complete all as specified and as directed

S&F 32 mm waste coupling of PTMT half or full threaded min wt 45 gm all as specified and directed Make - Prayag, cat No- 103/101 or equivalent in Cera/ Essco complete all specified and directed

S&F in repairs waste coupling for steel sink complete all as specified and directed Make - Prayag, cat No-SA-03 or equivalent in Cera/ Essco complete all specified and directed

S&F in repairs 32mm PVC waste coupling for WHB complete all as specified and directed. Make- Prayag, cat No- 103/101 or equivalent in Cero/ Essco complete all specified and directed

S&F 32mm PVC waste Pipe best quality non flexible for WHB/sink complete all as specified and directed. Make- Prayag/Cera/ essco

S&F in repairs 32mm PVC waste Pipe for WHB/sink complete all as specified and directed. Make- Prayag, cat No- 3272 or equivalent in Cera/ Essco complete all specified and directed

S& F pillar taps of PTMT any colour screwed for iron pipe and fixed (Min Wt 110 Gm s)complete all as specified and as directed by GE/ Engr-in-charge

S& F in repairs pillar taps of PTMT any colour screwed for iron pipe ans fixed (Min Wt 110 Gms).complete all as specified and as directed.

S&F 15mm in repair size PVC Connection 450 mm long with two PTMT nuts complete all as specified and as directed.

S&F in repairs stop valves 15 mm dia of PTMT any colour high pressure screwed for iron pipes (Min Wt 90 Gms).

S&F in repairs angle stop valves 15 mm dia of PTMT any colour high pressure screwed for iron pipes (Min Wt 90 Gms).

S&F in repairs 100 mm dia grating of PTMT(Min Wt 25 Gms).

S&F tubular towel rail 60cm long of PTMT fixed with screws and wooden/plastic cleats (min wt 60 gms) in repairs complete all as spd & directed.

S&F in repair PVC SWR pipes 75 mm dia single socketed in any length with rubber ring joints fixed to wall complete.

S&F 75 mm dia bore (in fitting)PVC (SWR) bend any radius.

S&F in repair 50mm dia, high density polyethylene pipe (HDPE) of pressure rating 6 kgf/cm2 incl socket, bend as in waste pipe for WHB/sink complete to walls, ceilings or in floors etc.

S&F PVC lid for water storage tank suitable for 500/1000 ltr capacity complete all as directed.

S&F PVC lid for water storage tank suitable for 300 ltr capacity complete all as directed.

S& F in repair MS kitchen sink/WHB bracket as fixed in CM 1:3 or PCC 1:2:4 type BO complete.

S&F in repairs Bib taps standard of PTMT,15 mm dia any colour screwed for iron pipes (Min Wt 90Gms),directed.

S&F in repair 15 mm bore Swivel shower of PTMT any colour for fixing with15mm pipe .(Minimum weight 40gms).

Cleaning and removing all scale and dirt,etc from tanks and from mouths of circulating pipes, etc capacity exe 250 lt but nexe 500 lt complete all as specified. Note-Date of cleaning should be mentioned over each tank by synthetic enamel paint.

Easing of door shutters for easy closing / opening tightening of hinges or changing the position of hinges adjustment of tower bolts, sliding bolts with new screws etc complete all as specified and directed.

Easing of window shutters, kitchen cupboard shutters, show case shutter drawers incl fixing of screws adjusting handles, knobs tightening piano hinges incl misc small adjustments complete all as specified and directed

S&F in repair 75mm long double legged door stopper of aluminium alloy with rubber all as specified and directed .

S&F in repair aluminium anodized hasp & staple safety type with mild steel hinge pin incl. bolt to hinge plate fixed with screws of 100mm length all as specified and directed

S&F in repairs mild steel cold rolled medium weight butt hinges 100mm size by welding to angle iron chowkhat complete all as specified and directed

S&F in repair stainless steel wire cloth, 0.36 mm nominal dia of wire and 1.40 mm average width of operature fixed with tinned tacks or galvanished wire staple complete all as specified & directed.

Hacking out old broken glass (any the size quality or description) from wooden or steel frames glazed all as specified and directed

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares of any size complete all as specified and directed

S&F 3mm thick figured glass pin head type and glazing with oil putty or wooden beads in squares n exc 0.50 Sqmtr each pane complete all as specified and directed

M&L 40mm th PCC 1:2:4 type B1 using 20mm graded stone agg as in floors finished even & smooth using extra cement in patches all as specified and directed

Supply only 3mm thick and 38 mm wide glass dividing strip

S&F in repair curtain rods of chromium plated mild steel conduit pipe 19mm dia with wall thickness 1mm including chromium plated bracket holders for holding of rods and fixed with screws to pelmet boxes/wall complete all as specified and directed

Dismantling timber scantling 40 Sqcm and over in sec in framed work any posn complete all as specified.

M&L scantling in 2nd class H/W clean sawn fixed with nails in timber frame work complete all as specified and directed.

Dismantling of asbestos cement (corrugated or semi corrugated etc) sheet in roof covering complete all as specified and directed

S&F for 6mm thick asbestos cement sheets corrugated or semi corrugated fixed with 'L' type or 'J'' hook and washers as in roof covering etc complete all as specified and directed by GE/ Engr-in-Charge.

Fixing only old asbestos cement (corrugated or semi corrugated) sheets fixed with and including M&L for 'L' type 'J' type hook or cranked bolt and washers complete all as specified and directed complete all as specified and directed by GE/ Engr-in-Charge.

Dismantling of plain galvanised steel sheet any type and any size situated over AC sheet roofing all as specified and directed.

S & F for 0.63 thick plain galvanised steel sheeting with 120 gm Zinc (spelter) coating per sqm both sides inclusive as in ridges, hips, valley gutters drip and straight flashing fixed with L or J type hook and washers complete all as specified and directed complete all as specified and directed by GE/ Engr-in-Charge.

Supply and fix coloured galvalume corrugated sheet with base metal thickness (BMT) 0.50 mm, multi rib profile, minimum 550 Mpa yield stregth having maximum pitch of 250 mm C/C and minimum 28 mm crest depth as in roof covering / cladding to wall fixed with self tapping screw, complete all as specified and as directed complete all as specified and directed by GE/ Engr-in-Charge.

Fixing only for old plain galvanised steel sheeting as in ridges, hips, valley gutters drip and straight flashing fixed with L or J type hook and washers complete all as specified and directed complete all as specified and directed by GE/ Engr-in-Charge.

M&L for providing cement concrete 1:2:4 type B-1 using 20 mm graded stone agg as in, coping, benching, roof curb, rounded or chamfered on edges finished top surface even and smooth without using extra cement at any height complete all as specified and directed.

Removing of excavated/demolished materials exc 1.50km but nexc 5 km and depositing where directed.

Dismantling mild steel Work of any description fixed in any posn not otherwise provided for complete all as specified and directed.

M&L framed MS work as in steel doors incl gusset plate, rails, bracket, ms plate etc and similars works conforming to FE 410 complete all as specified and directed.

Fixing only old wind ties obtained from above item complete all as specified and directed.

Dismantling wall or ceiling boards (fibre, pulp insulation etc) any thickness & at any height complete all as specified and directed.

Dismantling timber scantling under 40 Sqcm in sec in framed work any posn complete all as specified and directed.

M & L plain fillets rectangular in section, clean sawn, secured with nails and sectional area exc 3 & nexc 6 sqcm, using IInd class HW complete all as specified and directed.

S&F 4mm thick AC sheet plain building board fixed to timber framed work fixed with screws at any height complete all as specified and directed.

Fixing only old AC sheet plain building board fixed to timber framed work fixed with screws at any height complete all as specified and directed.

Taking down chowkhat or frame n.exc 1.50 sqm with shutters (wihtout taking of shutter from frame ) etc complete all as specified and directed.

All as per above item but exc 1.50 Sqm but n.exc 4.00 Sqm

Taking down shutter n. exc. 1.0 Sqm all as specified & directed.

Taking down shutter exc. 1.0 Sqm and not exc.2.0 Sqm all as spd & directed.

S&F plan solid straight chowkhat or frame rebated on the solid rounded or chamfered put together with glue pind at joints in 2nd class HW complete all as spd & directed.

S&F for factory made glazed and Skelton shutters open rebated sand prepare to receive glass/gauge etc, without sash bars, edges of framing plain chamfered or rounded, fitted without mitred beads for securing glass etc size of members of shutters as specified in SSR Part 1 Sec 8 clause 8.24 (a) of IInd class HW 35 mm thick complete all as specified & directed

S&F for factory made glazed and skelton window/ventilator shutters open rebated sand prepare to receive glass/gauge etc, with plain chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain chamfered or rounded, fitted cut and mitred beads for securing glass etc size of members of shutters as specified in SSR Part 1 Sec 8 clause 8.20 (b) of IInd class HW 30 mm thick complete all as specified & directed.

M&L factory made 35mm thick plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated, using IInd class HW, complete all as specified & directed

S&F 75 mm size but hinges medium weight cold rolled mild steel complete all as spd & directed.

S&F in repair 75 mm size but hinges medium weight cold rolled mild steel complete all as specified & directed.

S&F 100 mm size but hinges medium weight cold rolled mild steel complete all as specified & directed.

S&F in repair 100 mm size but hinges medium weight cold rolled mild steel complete all as specified & directed.

S&F in mild steel helical door spring 150 mm ordinary rat tail type incl roller and roller plate complete fixed with screws to wooden frames or with welding to steel frames complete all as specified and directed.

S&F in repair mild steel helical door spring 150 mm ordinary rat tail type incl roller and roller plate complete fixed with screws to wooden frames or with welding to steel frames complete all as specified and directed.

S&F 250mm long, mild steel sliding door bolt stove enameled black with bright bolt not less than 12 mm dia with and including a minimum 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed.

S&F in repair mild steel sliding door bolts plate type stove enameled black with bright bolt not less than 12mm dia with and incl a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate, length of bolt 250mm complete all as specified and directed.

S&F 150 mm long mild steel barel tower bolt stove enamelled black with bright bolt and fixed, complete all as specified and directed.

S&F in repair 150 mm long mild steel barel tower bolt stove enamelled black with bright bolt and fixed, complete all as specified and directed.

S&F 125 mm MS pressed handle oval type stove enamelled black complete all as specified and directed.

S&F in repair 125 mm MS pressed handle oval type stove enamelled black complete all as specified and directed.

S&F 100 mm MS pressed handle oval type stove enamelled black complete all as specified and directed.

S&F in repair 100 mm MS pressed handle oval type stove enamelled black complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint over a coat of pink primer including preparation of newly wooden surfaces of any description exc. 10cm width or girth complete all as specified and as directed.

M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer including preparation of newly steel surfaces of any description exc. 10cm width or girth complete all as specified and as directed.

Taking down steel chowket or frame with shutters (without taking of shutter from frame ) of any description etc complete all as specified and directed.

S&F Steel window with side hung shutters incls box type hinges with steel handle and steel peg stay complete with glazing bars dovetailed or welded including one coat shop zinc chrome primer complete all as specified and directed..

S&F Steel window with side hung shutters incls box type hinges with steel handle and steel peg stay complete with out glazing bars dovetailed or welded complete all as specified and directed..

S&F Steel ventilator with top hung shutter incls hinges steel peg stay complete all as specified.

M&L MS work such as grills, grating etc with end of bars shouldered and/ or reverted or forged in to spikes framed guard bars barred iron doors ; ladders; framed balusters, walk ways railing framework of water tanks and simillars works conforming to FE 410 Gde-310 complete all as specified and directed.

M&L PCC 1:2:4 type B1 using 20mm graded stone aggregate as in bed block for fixing of angle iron post and the similar work complete all as specified and directed

Taking down chocked cast iron pipes including fittings by burning out lead joints etc to facilitate dismantling old serviceable fittings / pipes laid in tranches floors or fixed to walls all as directed including earth work, demolition of PCC / Brick work for following size complete all as specified and directed.

100 mm bore pipe.

75 mm bore pipe.

S&F cast iron sand cast soil waste or vent pipes in any length with or without ears with cement joints laid in trenches, floors or fixed to walls all as directed including making good to match with existing surface complete all as specified and directed for following size of pipe :-

100 mm bore pipe.

75 mm bore pipe.

S&F in repairs cast iron branch pipes single, T (equal or unequal) ordinary or inverted spigot or socket type complete all as specified and directed :-

100 mm bore pipe.

75 mm bore pipe.

S&F in repairs cast iron bends (any radius) diminishing pieces or tapers (larger bore measured) complete all as specified and directed for following size pipe complete all as specified and directed -

100 mm bore pipe.

75 mm bore pipe.

M/S ASM ENTERPRISES

P.N. BROTHER

RAJA RAM AND COMPANY

smc system & services

M/S KUSHWAHA BROTHERS

Lalta Prasad vijay kumar Forwarding Agency

Jain Builders

LOKESH BUILDERS

jayanti associates

m/s sahu enterprises

MITHILA BUILDERS AND ENGINEERS