GE/CHM-48/2025-2026 PERIODICAL SERVICES AND CONNECTED REPAIR WORK TO OTM ACCN IN THE AOR OF AGE B/R III AT CHANDIMANDIR

Amount

Taking down cement plaster from brick walls or concrete surfaces including raking out joints, hacking out for key, scrubbing down with water complete all as specified and directed and removing rubbish etc. complete all as specified and directed.

Rendering 15mm thick in Cement and Sand mortar 1:4 over fair faces of brick / concrete ,finished even and smooth without using extra cement, including using water proofing compound, including necessary scaffolding & safety arrangement for plaster upto & including 4 storey building complete all as specified. Note : WPC shall be measured and paid separately.

Rendering 15mm thick in Cement and Sand mortar 1:6 over fair faces of brick/concrete surfaces ,finished even and smooth without using extra cement, including necessary scaffolding & safety arrangement for plaster u complete all as specified.

Rendering 10mm thick in cement mortar 1:3 on fair faces of concrete surfaces as in ceilings , finished fair and smooth, ncluding necessary scaffolding & safety arrangement for plaster u complete all as specified.

Supply only integral water proofing compound (ISI Marked) complete all as specified & directed.

Preparation of old/new plastered surfaces and applying Nano technology based Nano Putty is white cement based product with dispersible polymer and functional additives for application on interior rough plasters to give a smooth surface and will form base for paint finish for interiors of the building, applied in 02 coats of total thickness 1.5mm @ 1.2 kgs/sqm complete all as specified.

Complete removal of existing treatment & levelling of wall/ceiling surface using the existing treatment as retrieved by scrapping/sanding etc for obtaining smooth paintable surface complete all as specified and directed

Finishing walls with acrylic smooth exterior paint of required shade, Nanotechnology based Nano water based electmetic finish Two Coats over one coat of water based electometic primer as mentioned in manufacturer manual over a coat of exterior nano primer by using roller including preparation / levelling of new surface of wall using manual sand papers (where reqd) of approved grade complete all as specified and directed by Engr-in-Charge.

Finishing walls with acrylic smooth exterior paint of required shade, Nanotechnology based Nano water based electmetic finish Two Coats over one coat of water based electometic primer as mentioned in manufacturer manual over a coat of exterior nano primer by using roller including preparation / levelling of old surface of wall using manual sand papers (where reqd) of approved grade complete all as specified and directed by Engr-in-Charge.

Finishing walls with acrylic smooth exterior paint of required shade, Nanotechnology based Nano water based electmetic finish one coat over one coat of water based electometic primer as mentioned in manufacturer manual over coat of exterior nano by using roller including preparation / levelling of old surface of wall using manual sand papers (where reqd) of approved grade complete all as specified and directed by Engr-in-Charge.

Preparation of wall surfaces and applying two coats of distempering(smart periodical) with 1st quality nano technology based nano water based premium acrylic interior emulsion paint with unique chemical composition of finest quality, as mentioned in manufacturer manual over a coat and including of a nano priming coat on prepared new surface of wall & ceiling with using roller complete all as specified and dircted by Engr-in-Charge.

Preparation of wall surfaces and applying two coats of distempering(smart periodical) with I st quality nano technology based nano water based premium acrylic interior emulsion paint with unique chemical composition of finest quality, as mentioned in manufacturer manual over a coat and including of a nano priming coat on prepared old surface of wall & ceiling with using roller complete all as specified and dircted by Engr-in-Charge.

Preparation of wall surfaces and applying One coat of distempering(smart periodical) with 1st quality nano technology based nano water based premium acrylic interior emulsion paint with unique chemical composition of finest quality, as mentioned in manufacturer manual over a coat and including of a nano priming coat on prepared old surface of wall & ceiling with using roller complete all as specified and dircted by Engr-in-Charge.

Applying wall care putty 1mm thick, on new plastered wall surfaces & smoothening the surfaces with sand papers etc., (preparatory to OBD/ plastic emulsion/ interior/ exterior emulsion paint as directed) complete all as specified.

Applying two coats of exterior acrylic emulsion paint on new wall surfaces of required shade over a coat of primer complete all as specified and directed.

Preparation of old surfaces of walls and applying one coat of cement base paint of approved tint, including necessary scafolding and safety arrangements, upto four storey bldg complete all as specified and directed

Preparation of old decorated wall surfaces and applying one coats of oil bound distemper complete all as specified and directed.

Preparation of old decorated ceiling surfaces and applying one coats of oil bound distemper complete all as specified and directed.

One coat of white wash on old decorated wall surfaces including preparation of old surfaces complete all as specified and directed

One coat of white wash on old decorated ceiling surfaces including preparation of old surfaces complete all as specified and directed

Preparation of old wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Preparation of old steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Preparation of old decorated concrete/ brick/stone /tile surface exc 10 cm width or girth and applying one coat of synthetic enameled/ Terracotta paint of any shade / colour complete all as specified & directed.

Repair to RCC sunshades, chajjas, balconies, coloumns, bands, beams and similar RCC work at any position / height by dismantling loose / disintegrated portion including necessary scafolding and safety arrangements and fixing of reinforcement (cut to length, bent to shape required, including cranking, bending spirally including mild steel wire (annealed) not less than 0.9 mm dia and chicken wire mesh of size 12.5mm x 1mm securing with clips/ chicken wire mesh wherever required and dubbing out with cement concrete 1:1.5:3, 15mm to 50mm thick, using 6 to 12mm graded stone aggregate to make up and finished the required shape including provision of necessary scaffolding and formwork up to four storey bldg if required and finished with 5mm thick rendering in cement mortar 1:4 finished even and fair without using extra cement complete all as specified and directed.

Note For serial item No 6 to 13: The work for periodical services shall include the following and the rates quoted by the bidders shall include the same :- (a) The work pertaining to periodical services shall be executed by the contractor as per MoU from authorised applicator through manufacturer of the materials like Exterior /Interior Emulsion paint, putty etc after approval by the GE. (b) The Contractor shall upload with the documents under cover I "Memoradum of Understanding" (MOU) with at least one of the manufacturers mentioned in the contract, failing which the bid shall be laible to be rejected. (c) Use of Scaffolding, trestles, ladders, cradles etc necessary for execution of work and protective measures. (d) Removing of Nails, making good holes, cracks etc and preparation of surfaces. (e) Work in patches and in narrow / widths, bands, cornices, pilasters etc and cutting in edge of line where necessary. (f) Spreading and removing covering to doors, windows, floors, fittings etc to protect them from splashes. (g) Washing floors, cleaning glass, joinery , electric fittings , wirings etc. Drops and splashes of paint to be cleaned to the entire satisfaction of Engineer-in-Charge. (h) Sample patch of 10Sqm be prepared considering all the items of periodical and shall be got approved from GE prior to carrying out further work.

Gunjan and Gunjan Associates (BID ID -3344716)

Shiv Amar Builders (BID ID -3343287)

Shivalik Enterprises (BID ID -3343481)

chahalbuilders (BID ID -3344021)