Work

Amount

Erection of following equipments as per Instruction manual of various equipments and technical specifications including shifting of material/equipment from store to erection site including all other associated work to complete the job satisfactorily as per direction of supervising engineer.

ABT Metering Panel with energy meters

Erection of 132 KV Main and auxiliary structure consisting of columns, beams, peaks, masts etc. and auxiliary structure required for installation of Isolators, C.Ts. P.Ts., CVTs, L.As. and all other equipments. The job consists of shifting of all material i.e. structure parts, nuts, bolts, washers etc. from store to site of erection. erection of structure as per relevant drawing and practices using flat and spring washer with each bolt. Matching of holes, cutting matching of members if required shall also be done by the contractor without any extra cost to complete the work satisfactorily. All material to be erected shall be supplied by UPPTCL free of cost but all men, material and T&P required for satisfactorily completion of work shall be arranged by the contractor at his own cost including all other associated work to complete the job satisfactorily as per direction of supervising engineer.

Jumpering work between equipment in 132 KV Bay by Panther Conductor including cutting laying, fixing and proper tightening with the help of skilled labour & T&P including all other associated work to complete the job satisfactorily as per direction of supervising engineer.

Laying of flowing sizes of control cable in the cable trench from various equipment to control and relay pane, marshalling boxes etc. from switch yard as per cable schedule, its saddling at every 750mm distance with M.S. saddles of size 25X3mm. Size including carriage of cable drums from store to laying site and shifting back to store and all other associated work to complete the job satisfactorily as per direction of supervising engineer.

6X2.5 Sq. mm

4X2.5 Sq. mm

2X2.5 Sq. mm

Termination of following sizes of cable as laid above as per cable schedule including making necessary holes in glands plates or box wherever required, supply and fixing of cable glands of appropriate size, supply and providing ferrules and Nos. for each core. (The rates of termination of Control cable include the all cores of cable at one end with lug) including all other associated work to complete the job satisfactorily as per direction of supervising engineer.

6X2.5 Sq. mm (each end)

4X2.5 Sq. mm (each end)

2X2.5 Sq. mm (each end)

Cutting straightening, bending laying 600 mm below in side ground and above ground of with 50X6/75x10 mm size of M.S. Flat for earthing of main structure, Auxiliary structure, C.T, C.B, B.I, L.I, with by 50x6 MS. Round with newly laid earth mat ‘x’ & ‘y’ axis below 600 mm ground and above by excavation of trenches its back filling, straightening, cutting, bending work also includes painting of M.S earth ship above ground level with one coat of red oxide and two coat of bus green enameled paint, and below ground each earth point raising from main earthmat ‘x’ & ‘y’ axis should be painted with bitumen black Japan paint and all other associated work as required to complete the work satisfactorily as per direction of supervising engineer. (excluding the cost of M.S Flat).

Laying of 40/36 mm size M.S. round bar 600 mm below ground level including cutting, straightening welding, painting of joints with bitumen black Japan paint, excavation of trench, its back filling and all other associated work to complete the work satisfactorily as per drawing and technical specification (excluding the cost of MS bar) work includes providing and fixing of 100 mm long, 50X50X6 mm MS angle (4 Pcs) at each cross joint of earth mat as per direction of supervising engineer to complete the job satisfactorily.

Fabrication of 3 Meter long Electrodes with the 40 mm/36 mm MS Rod having 150 MM long conical shape and then its piercing vertically inside the ground with top 600 mm below ground level and its welding with main earthmat excluding the cost of MS bar, providing and fixing 50x50x6 angle 100 mm pieces for each joints as per direction of supervising engineer to complete the job satisfactorily.

Preparation of Inter connection diagram and cable schedule as per drawing to complete above job for C&R panel and circuit breaker

To make earthing for L.A. with 06 Nos. Electrode of 03 meter long M.S. round including cutting, welding and making electrode and making a rectangle with 75x10mm M.S. flat inside earth below 0.8mtr. deep including excavation and refilling of soil with T&P and labour etc for completion satisfactorily.

Supply of Earthing/discharge rod of first Class Insulation for system voltage up to 400 KV having total height as 7200mm one set consisting of following items (a) Earthing pole 6.5 Mtr long in four pieces made of epoxy bonded glass fiber (b) Earthing cable12 meter long with transparent PVC Insulated 12 Sz.mm flexible copper conductor filled with line end earthing clamp and earthing clamp of Aluminum alloy LM-6 suitable for Moose/Zebra/Panther Conductor (c) canvas carry bag for above

M/S SHIVA CONSTRUCTION

M/s Tanishk Enterprises