AED/205/2025-26

ERECTION PART 11/0.4KV, 25 KVA Sub-Station to 11/0.4kv,63 KVA Sub-Station

Erection of 63 kva S/Stn. Str.:- Dismentling of existing 11/0.4kv,25 kva Sub-Station and erection of 11/0.4kv,63 kva Sub-Station alongwith LT Distribution box , re-earthing, earthing conn. to T/F G.O Switch lightning etc. erection of Jumper, Pipe earthing 3 Nos., Erection of LT cable, complete in all respect.

Mannual carriage from road to site ,transportation charges from central store to site and loading- unloading in all respect (IN ALL HEAD) average distance at site

Supply PART 11/0.4KV,25 KVA Sub-Station to 11/0.4kv,63 KVA Sub-Station

Distribution Transformer (Ordinary) 11/0.4 KV, 63KVA (Provided By HPSEBL)

Pipe Earthing Set

LT Distribution Panel Box

Transformer Bed

Full Clamp

Half Clamp for Cross Arm

Nut and Bolts

LT Cable (3.5 Core) 120 mm²

Aluminium Paint

Red Oxide

Surge Arrestor (9kV, 10KA, Station)

Capacitor Bank for 63 kVA DTR

GO AB Switch Unit (11kV, 400A, 25 KA ) Tripple pole O/D type

Providing and Fixing wooven mesh fencing along with Gate & locking arrangement (for more detail check attached drawing and measurement detail)

Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand) : 8 graded stone aggregate 40 mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement- All work up to plinth level 1:1.5:3 (1 cement : 1.5 coarse sand): 3 graded stone aggregate 20 mm nominal size)

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. wherever required, all complete In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge Made of G.I. wire of dia 4 mm

Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc. complete 100x58x1.90 mm

Providing and fixing ISI markedoxidisedM.S. sliding door bolts with nuts and screws etc. complete : 250x16 mm

Please Enable Macros to View BoQ information