Construction of auditorium block at HIPA Providing hearting systgem in hostel block and FCU in lobby and corridor area

Amount

Supply, installation, testing and commissioning of hot water piping and fittings complete with supports, hangers and specified insulation thickness. All piping shall be black mild steel Class C, ISI marked with fitting. The unit rate of piping shall include this support arrangement and hangers i/c wooden isolator where required under insulation at support points.The piping shall be insulated with 80Kg/ M.Cub. section density fiberglass insulation finally covered with Al. Cladding for inside and 6mm plaster for outside complete as required

32 mm pipe with 50 mm insulation.

25 mm pipe with 50 mm insulation.

19 mm pipe with 50 mm insulation.

Supplying, installation, testing & commissioning of forced air radiator fan units construction made of panels inside layer with polyurethane foam insulation of between panels supplied with factory fitted powder coated supply air plenum with acostic insulation, abs/aluminium supply air powder coated extruded grill .Three layer deep heating coil section only with aluminium finned copper tubes ,drain pan ,circular fan having high static pressure & fan motor suitable to operate from 230±10% volt, 50 Hz, single phase power supply complet with arrangement of moudulating control thermostat complete as required

Supplying, installation, testing & commissioning of water softner suitable to deliver two cum mtr per hr with vessel and multiport valve complete as required

Supply, installation, testing and commissioning of Gate valves/ Sluice/Glove/ Butterfly valves required. Valves 65 mm and above shall of C.I. IBR86 Body Grade A , with flanged ends and gunmetal trim, yoke type -rising stem ,P N. 1.6 and i/c flanges and valves upto 50mm shall be gunmetal flenged ends non rising stem, integral seat, body Sant/ Kirloskar/Leader/Puri

Supplying, installation, testing & commissioning of refrigerant based heating unit of heat output upto 4200 kcal /Hr (Air-conditioning unit) working on single phase votage range 140 to 280 volt i/c outdoor unit complete as required in all respects.

Supplying and fixing wall mounting Automatic Voltage Stablizer 4 KVAfollowing rating with output 240 volts with voltage regulation and time delay operation suitable for 1.5TR capacity Split type Air Conditioner including making connections etc as required complete in all respects.

Providing and fixing of M.S. Outdoor heavy duty stand powder coated suitable to hang outdoor Anchor bolts as required complete in all respects and as per direction of Engineer-in-charge.

Supplying & fixing of copper tubes for refrigerant and condensate for indoor unit to outdoor and including the cost of insulation etc. as required complete in all respects.

Supplying and fixing of 25mm dia of PVC drain pipe along with the accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

Supplying & fixing of comunication control wiring fourcore 2.5 sq mm round flexible cable suitable for units as required complete in all respects.

UNITECH ENGINEERS