VILLAGE HOLISTIC INFRA DEVELOPMENT AT MARNGAR,MEGHALAYA

Civil Works

Plumnbing Works

Electrical Works

Plumber(unskilled)

BoQ_Ver4.0

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only)

NUMBER #

a) All kinds of soil (ordinary soil hard soil/dense soil)

With available excavated earth

b) Stone soling (ii) 150 mm

(b) In prop. 1:3: 6 (1 cement:3 coarse sand : 6 coarse agg. by volume (using mixture machine)

c) Thermo-Mechanically Treated bars

Foundations, footings, bases of columns, etc. for mass concrete (using steel).

Slabs, roofs, landings, balconies and access platform, shelves (using steel).

Lintels, beams, plinth beams, girders, bressumers and cantilevers.

Columns, Pillars, Piers, Abutments, Posts and struts (using steel).

b) M20 or 1:11/2:3 (1 cement: 11/2 coarse sand: 3 graded stone aggregate 20 mm nominal size)

b) M20 or 1 :11/2:3 (1 cement: 11/2 coarse sand: 3 graded stone aggregate 20 mm nominal size)

b) M20 or 1 :11/2:3 (1 cement: 11/2 coarse sand: 3 graded stone aggregate 20 mm nominal size)

a) Cement mortar 1 :4 (1 cement: 4 coarse sand)

a) Cement mortar 1 :3 (1 cement: 3 coarse sand)

a) 1 :4 (1 cement: 4 fine sand)

b) Extruded section profile size 42x50 mm

30 mm thick factory made Polyvinyl Chloride (PVC) door shutter made of stiles and rails of UPVC hollow section of size 60x30 mm and wall thickness 2 mm (± 0.2 mm), with in-built decorative moulding edging on one side. The stiles and rails mitred and joint at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The stiles of the shutter reinforced by inserting galvanised M.S. tube of size 25x20 mm and 1 mm (±D.1 mm) wall thickness. The lock rail made up of 'H' section, UPVC hollow section of size 100x30 mm and 2 mm (sO.2 mm) wall thickness fixed to the shutter stiles by means of plastic/ galvanised M.S. 'U' cleats. The shutter frame filled with UPVC multi- chambered single panel of size riot less than 620 mm, having over all thickness of 20 mm and 1 mm (±0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineer-in- charge.(For W.C. and bathroom door shutter).

a) Two track two panels sliding door made of (big series) frame 67x50 mm & sash 46x82 mm both having wall thickness of 2.3 cO.2 mm and single glazing bead/ double glazing bead of appropriate dimension. (Area of door above 2.00 sqm up to 5.00 sqm)

b) Three track three panels sliding window with fly proof ss wire mesh (Twc) nos. glazed & one no. wire mesh panels) made ot (small series) frame 92x44 mm & sash 32x60 mm both having wall thickness of 1.9 sO.2 mm and single glazing bead Of appropriate dimension (Area of window up to 1.75 sqm).

c) Three track three panels sliding door made of (big series) frame 116x45 mm & sash 46x82 mm both having wall thickness Of 2.3 cO.2 mm and single glazing bead/ double glazing bead of appropriate dimension. (Area of door above 5.00 sqm).

(i) Coloured tinted float glass 6 mm thick substrate with reflective soft coating on face #2, +12 mm Air gap +6 mm Heat Strengthened clear Glass of approved make having properties as visible Light transmittance (VLT) of 25 to 35°/a, Light reflection internal 10 to 15°/o, light reflection external 10 to 20 a/o, shading coefficient (0.25 -0.28) and U value of 3.0 to 3.3 W/sqm K etc. The properties Of performance glass shall be decided by technical sanctioning authority as per the site requirement

a) New work (two or more coats over an under coat of suitable shade with ordinary paint of approved brand and manufacture)

a) White marble/ Green marble/ Black marble (i) Area of slab up to o.50 sqm

a) Cherra stone block (300xl 50xl 00)

a) Light shade pigment using white cement

c) 12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of Gypsum plasterboard, manufactured from natural gypsum as per ls:2095 part I and laminated with white 0,16 mm thick fire retardant PVC film on the face side and 12 micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit

a) 1.00 mm thick with zinc coating not less than 275 gin/sqm

BoQ_Ver4.0

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only)

NUMBER #

Sanitary work

Providing and fixing wash basin with C.I. brackets, 15 mm CP. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutling and making good the walls wherever require:

Providing and fixing wash basin with C.I. brackets, 15 mm dia. CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required

Providing and fixing PTMT towel rail complete with brackets fixed to wcoden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.

Providing and fixing CP brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.

Providing and fixing PTMT grating of approved quality and colour.

a) Circular type

Installation, Testing and Commissioning of Elmbrook 44-48 in. W x 74 in. H Sliding Frameless Shower Door in Anodized Brushed Nickel with 5/16 in. Thick Clear Glass

Internal Water Supply

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, Including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.

Internal work - Exposed on wall

(i) 15 mm nominal outer diameter Pipes

Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 in spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.

Internal work - Exposed on wall

Concealed work, Including cutting chases and making good the walls etc.

Providing and fixing brass stop cock of approved quality: SOR

a) 15 mm nominal bore

Soil,waste vent & Rain water Pipes

Supplying, Installation, Testing and Commissioning of uPVC pipes type -B conforming to IS 13592 (1992) for soil, waste and vent pipes including all fittings rubber ring type (plain or with access door) e.g. bends, junctions, cowls, offsets, access pieces, jointing with rubber ring joints with lubricant etc. fixed with clamps to walls with cement concrete 1:2:4 blocks complete in all respects.

Providing and fixing the following uPVC pipes of Supreme, Astral make conforming to IS: 4985 of 6 kg/sqcm for drainage system cut to required length to be laid under floor including covering all around with cement concrete and making good the same complete as per directions of Engineer- Incharge

Providing and fixing SS grating of approved quality including cutting and making good the walls and floors wherever required complete as per directions of Engineer- Incharge.

Filters

Fiberglass reinforced tank and swing away water diffuser with top Mount multiport valve (800 mm 'dia')

Media- Glass Media

Recirculation pump

Media- Glass Media

Self Priming pumps.Pump body and prefilter in cast iron Motorshafts in stainless steel AISI-304, impeller in HT200, mechanical seal in graphite.with motor -2900 rpm, 1.5kw, 220-380V, 2HP, protection IP-55 and insulation class F.

Inline Feeder

Chlorination

Main Drain

Media- Glass Media

Wall Inlet

Media- Glass Media

Suction Inlets ( Vacuum points)

Media- Glass Media

Ladders

3step ladder ss304.

Underwater Lights

LED Light, Warm White Color, 20W / 12V

Make: Aquatech, Pool buddy & Equiv

Telescopic Handle

Media- Glass Media

Hose Pipe (Floating Hose)

Media- Glass Media

Vaccum Head

Media- Glass Media

Shallow Net

Media- Glass Media

Deep Net

Media- Glass Media

Brush

Media- Glass Media

Test Kit

Media- Glass Media

Basic PH &CL test kit

SWIMMING POOL PLUMBING

Pool Plumbing

Providing all necessary plumbing using u-PVC Schedule 40 pressure Pipes with plain socket suitable for solvent cement jointing conforming toIS:4985/2000 & fittings conforming to IS 7834/87. Cut to required lengths including all necessary fittings and specials such as bends, tees, unions, reducers, flanges and plugs etc.The plumbing installation shall be tested to a pressure of 10 Kg/Sq.cm. for a period of 4 hours before covering with mortar. The rate includes all uPVC ball valves and non return valves as required and directed by the consultant. The pipe line will supported by proper MS support (duly pianted ) in the plant room and encased in concrete when underground. (All civil work support will be provided by the clinet).

Make: Paras/Astral/Equiv.

ELECTRICAL CONTROL PANEL and Wiring

Make: Polycab/Havels/Equiv.

BoQ_Ver4.0

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only)

NUMBER #

Concealed wiring in looping system with 2x1.5 sqmm PVC isulated single core cable of 600V grade in heavy guage PVC pipe including occuping and fitting of elbows, bend, fees, junction boxes etc including required size of MS concealed Boxes and front plate for housing of switches, sockets, fan regulator, bell push etc complete to light point.

Long Point upto 10 mts

Wiring as in item No.20 above to Light Plug Point when fixed else where with continuous earth wire complete.

Long Point wiring upto 10 mts

Wiring as in item No.20 above to Light Plug Point when fixed else where with continuous earth wire complete.

wiring as in item No.20 above to Power Plug Point with 2×4mm 2 including supplying and fitting of 15Amp modular switch socket Combined with continuous earth wire to a Power Plug Point Complete.

Wiring as in item No.20 above to Light Plug Point when fixed else where with continuous earth wire complete.

Wiring as in item No.20 above to ceiling fan/exhaust fan point

Wiring as in item No.20 above to Light Plug Point when fixed else where with continuous earth wire complete.

Wiring as in item No.20 above to Wall point.

Supplying fitting and fixing of Telephone And switchboard Cables

20 pair 0.5mm

Supplying fitting and fixing of CO-Axial Cables Cables

RG-06 armoured (TV cables)

Supplying fitting and fixing of LED DOWNLIGHTS surface or wall mounted will all necessary accessories.

12W ceiling cutout, 138mm dia, height 90mm

18W ceiling cutout, 175mm dia, height 92mm

Supplying fitting and fixing of LED RETROFIT LAMPS surface or wall mounted with all necessary accessories.

Photon ultra LED tubelight (Single side Connection).

Supplying fitting and fixing of LED PANEL LIGHTING surface or wall mounted with all necessary accessories.

4X1(1180x280x70) mm LED luminaire

28W (as linear light)

Supplying fittings and fixing complete Switch Fuse Unit (S.F.U.)/sheet Steel Re-wirabble Main Switch with Pre-Fitted Fuse Wire 50 Hz 240/415 V.

3 Pole With Neutral (T.P.N.)

100 Amp 415V capacity

Supplying Fitting fixing complete polish brass bracket, 16mm dia and 23cm long with cast backplate and brass lamp holder with LED bulb surface or wall mounted with all necessary accessories.

Emergency LED bulb

Supplying & fixing of Load Kontaket Miniature Circuit Breakers DX3 MCB's for AC Application till 63A

Single pole 240/410 V

Supplying fitting and fixing DX3 Isolators for AC applications upto 125 A

double pole 240 V

Supplying, fitting & fixing of Distribution Board Duo box

With transparent crystal door

1 way 12 Module

Supplying and fitting of ceiling fan AC operated type 220/250 volt. Complete with 3 Nos of blades down rod canopy haning shackle & 30mm le

ngth of down rod supplied with the fan by the dealer but the extra length will be charged @ Rs25.00/ mtrs.

AC ceiling Fan '1200'mm sweeps

AC ceiling Fan '1400'mm sweeps

Supplying , fitting and fixing of exhaust fan double bearing self lubricating type single phase 50Hz 250V AC operated complete with supporting frame, fan blades, nuts and bolts and other petty accessories as required.

Domestic exaust fans (ii) 200 mm

Supplying fitting & fixing of Water Heater (Geyser) of 1.5Kw/3Kw with pressure release value including all necessary accessories as required .

25 litres capacity

Supplying fitting & fixing earthing with copper earth plate 600x600mmx6mm thick including accessories & providing masonary enclosure with cover plate having locking arrangement & watering pipe with charcoal, salts etc complete as required.

Copper Earth Plate Electrode

Concealed wiring in looping system with 2x1.5 sqmm PVC isulated single core cable of 600V grade in heavy guage PVC pipe including occuping and fitting of elbows, bend, fees, junction boxes etc including required size of MS concealed Boxes and front plate for housing of switches, sockets, fan regulator, bell push etc complete to light point.

Long Point upto 6 mts

Long Point upto 3 mts

Providing laying connection testing & commissioning of the following sizes of 1100V PVC/XLPE Armoured Cables With Aluminium Conductor as per ISI code in bracket, trenches, M.S. cable rods and including the cost of digging of trenches, sand cushioning with laying etc and refilling the same in layers or by supporting them in walls and all other accessories as required.

With 4 core 25sq-mm

Supplying & fixing of Load Kontaket Miniature Circuit Breakers DX3 MCB's for AC Application till 63A

Double pole 415 V

Supplying fitting and fixing DX3 Isolators for AC applications upto 125 A

double pole 240 V

Supplying, fitting & fixing of Distribution Board Duo box

With transparent crystal door

1 way 6 Module

Supplying fitting & fixing earthing with copper earth plate 600x600mmx6mm thick including accessories & providing masonary enclosure with cover plate having locking arrangement & watering pipe with charcoal, salts etc complete as required.

Copper Earth Plate Electrode

Supplying, fitting and fixing of 75W Solar Street Light , 25W 2 in 1 Luminary (Lithium Ion Battery), 75W Solar Panel, G.I. Pole (20 Feet Galvanised Complete with Structure Automatic Dusk to Dawn) Complete.

Supplying fitting and fixing of FLOOD LIGHT surface or wall mounted with all necessary accessories

Flood light suitable for highlighting architectural facade and general purpose lighting.

Supplying fitting and fixing of STREET LIGHTS surface or wall mounted with all necessary accessories.

LED street light made up of pressure die cast aluminium housing with high power led as lighting source and lens embedded PC cover having protection and impact resistance with 10KV Built-in surge Protection device.

40W suitable for pole dia Ø 43 mm (max.) (for 4m height single arm pole)

70W suitable for pole dia Ø 54 mm (max.) (for 7m height single arm pole)

70W suitable for pole dia Ø 54 mm (max.) (for 7m height double arm pole)

Supplying fitting and fixing of LANDSCAPE LIGHTS surface or wall mounted with all necessary accessories.

Aesthetically designed aluminium landscape luminaire for diffused lighting with high power LED as light source

8W (as bollard light)

Supply, Installation, Testing & Commissioning of 4 Mtr High hot dip Galvanized Octagonal Pole with bottom 130mm A/F, top 70 mm A/F made up of 3 mm thick HT plate and 220x220x12 mm base plate and 1000 mm long single arm bracket complete with 4 Nos M20 x 450 mm long foundation bolts, RCC foundation etc as complete as required.

4M pole

Supply, Installation, Testing & Commissioning of 7 Mtr High hot dip Galvanized Octagonal Pole with bottom 130mm A/F, top 70 mm A/F made up of 3 mm thick HT plate and 220x220x16 mm base plate and 1000 mm long single arm bracket complete with 4 Nos M24 x 700 mm long foundation bolts, RCC foundation etc as complete as required.

BoQ_Ver4.0

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only)

NUMBER #