CA NO GE/AFJ-58/2024-25 REPAIR /REPLACEMENT AND DAY TO DAY MAINTENANCE OF PERIMETER SECURITY LIGHTSSTREET LIGHTS BUILDING SECURITY LIGHTS POST TOP LANTERN GARDEN LIGHTS HIGH MAST LIGHTS IN DOMESTIC AREA AND TECHNICAL AREA AF STN JAMMU AND KALUCHAK

Amount

Dismantling and taking down the existing defective street light/security light fitting of any type and any capacity fixed at any height by replacing UNSV part including perpex cover checking loose connection etc, restroration of electric supply, detecting and repair of UG cable fault whenever required round the clock all as directed at site on daily complaint basis. Note :-The contractor shall be rectified the street light complaint on priority within the 04 hrs. Every day one electrician and one helper shell be check all security lights whole the area at 23 Wing. One complaint shall be considered as one Job.

S&F any type and any capacity 45 watt of new street light/security light/LED floodlight including making electric connection using two run of 1.5 sqmm single core unarmoured wire from junction box complete all as specified and directed by Engr-in-Charge.

Supply & fixing any type and any capacity 60 watt of new street light/security light/LED floodlight including making electric connection using two run of 1.5 sqmm single core unarmoured wire from junction box complete all as specified and directed by Engr-in-Charge.

Supply & fixing any type and any capacity 90 watt of new street light/security light/LED floodlight including making electric connection using two run of 1.5 sqmm single core unarmoured wire from junction box complete all as specified and directed by Engr-in-Charge.

Supply & fixing any type and any capacity 100 watt of new street light/security light/LED floodlight including making electric connection using two run of 1.5 sqmm single core unarmoured wire from junction box complete all as specified and directed by Engr-in-Charge.

Supply & fixing any type and any capacity 120 watt of new LED floodlight including making electric connection using two run of 1.5 sqmm single core unarmoured wire from junction box complete all as specified and directed by Engr-in-Charge.

Supply and fixing LED aviation light 10 watt, rating voltage 215-240 V including necessary connection with two run of 1.50 sqmm single core unarmoured copper cable from junction box, fixed in repairs, complete all as specified and directed by Engr-in-Charge. Note :(i) A certificate from the manufactures for warranty minimum upto 3 years shall be obtained and submitted to the AGE/GE (ii) Any touch up of the existing surface due to changing of fittings shall be done by contractor with similar surface finish without extra cost to the departmet Make: Phillips/Wipro/Crompton/Bajaj

Material and labour for repair to existing LED street light fitting 45 Watt to 60 Watt of any make including supply and replacement of driver, LED Strips and other minor allied items required at site to make the light fitting serviceable complete all as specified and directed by Engineer-in-Charge.

Material and labour for repair to existing LED street light fitting 90 Watt to 100 Watt of any make including supply and replacement of driver, LED Strips and other minor allied items required at site to make the light fitting serviceable complete all as specified and directed by Engineer-in-Charge.

Material and labour for repair to existing LED Flood light fitting 100 Watt to 150 Watt of any make including supply and replacement of driver, LED Strips and other minor allied items required at site to make the light fitting serviceable complete all as specified and directed by Engineer-in-Charge.

Labour only for taking down and lifting up high mast light fitting including replacing the unserviceable items to make the fitting serviceable ,serving, greasing of steel ropeand adjust/repair the timer, supply and fixing in replacement the contacts lifting mechanism with all accessories as required, complete all as directed by the Engineer-in-Charge. Note :- Spares like chokes, ignitor lamp & LED Drivers will be measured and paid separately)

Supply and laying of DWC (Double Wall Corrugated) HDPE Pipe, ISI Marked IS 16205 Part-II, of outer dia of 77 mm and inner dia 63 mm with smooth internal and profiled external surface for non pressure under ground cable including all connected accessories like coupler, 'O' Ring etc, for protection of cable complete all as specified and as directed Make: Rex-Polyextrusion/Gemini

Supply and laying of DWC (Double Wall Corrugated) HDPE Pipe, ISI Marked IS 16205 Part-II, of outer dia of 53 mm and inner dia 40 mm with smooth internal and profiled external surface for non pressure under ground cable including all connected accessories like coupler, 'O' Ring etc, for protection of cable complete all as specified and as directed Make: Rex-Polyextrusion/Gemini

Supply and fixing fixed in repairs cable Junction Boxes with terminals` IP 66 "halogen free and weather proof” for outdoor installation (with metric knockouts for cable entry - Black Colour) Cable Size 16/25 Sqmm, Box Dimensions-200 x160 x 98, Catalog No-KF 9255(hensel) complete taking out of loop of cable from ground by neccessary earth work all as spcefied and directed by Engr-in- charge. Make- Hensel/Dowells/Sintex

Supply & Fixing PVC insulated sheathed service wire twin core 2.5 Sqmm aluminium multi stranded conductor 1100 volts grade incl taking down old unserviceable one.

Supply & Fixing PVC insulated sheathed service wire twin core 04 Sqmm aluminium multi stranded conductor 1100 volts grade incl taking down old unserviceable one.

Supply & Fixing PVC insulated sheathed service wire twin core 06 Sqmm aluminium multistranded conductor 1100 volts grade incl taking down old unserviceable one.

Supply & Fixing PVC insulated sheathed service wire twin core 10 Sqmm aluminium multistranded conductor 1100 volts grade incl taking down old unserviceable one.

Supply & fixing Sub main wiring with two single core PVC insulated unshesthed cable copper conductor(FRLS-H) of size 2.5 sqmm multistranded and one run of 2.5 sqmm PVC insulated unsheathed copper conductor(FRLSH) as earth continuty conductor drawing in and including non-metalic PVC rigid conduit 25 mm dia ISI marked with all conduit accessories concealed in wall, cutting of chases in walls, floors, ceilings, beams etc and making good the disturbed surfaces as directed including taking down old unservicable wiring complete all as specified and directed. (Two run of single core cable and one run of earthing cable and one run of PVC conduit shall be measured as one length.)

Supply and fixing Rigid non-metallic PVC conduit 25mm dia (Heavy duty) in concealed exclusive of boxes (junction/terminal) but inclusive of all tees, bends,elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. including taking out old conduit complete all as specified and directed.

Supply and Fixing MCB SPN 40 Amps C Curve 25 KA with Sheet metal encloser, complete all as specified and directed. Make: Indoasian Cat Part No 811240 or equivalent siemens/ Legrand/Havells.

Supply and Fixing MCB Single Pole Neutral 25 Amps C Curve 25 KA with Sheet metal encloser, complete all as specified and directed. Make: Indoasian Cat Part No 811150 or equivalent siemens/ Legrand/Havells.

Supply and Fixing Sheet metal encloser,DB Two Way complete all as specified and directed. Make: Indoasian equivalent siemens/ Legrand/Havells.

S & F Timelite distribution board 63 Amps single Pole/230 Volt with Astronomical time switch consisting of MCB SP 63 Amps -1 No, Timer, Power Contactor 65 Amps TP -01 No Cat part No. TL065ASO Make : Indoasian/Legrand

Preparation of old painted surface of 9 Mtr. steel tubular poles above the top of PCC coping. Painting of pole from top of coping to a height of 1.5mtr (bottom portion of pole) with two coats of synthetic enamel paint(Make-DULUX/Superlac(Shalimar)/ Apcolite (Asian)/ Nerolac/ Luxol (Berger) in black and yellow alternate strip and painting the rest portion of pole of (approx length 7 mtr)including painting of cross arms/clamps etc complete with two coats of synthetic enamel aluminium paint (Make-Asian (Apex) /Berger (Weather Coat) / Shalimar (Ist quality) /Nerolac (Ist India) and to the entire satisfaction of Engineer-in-Charge complete all as specified and directed

M & L for Preparation of old cement based painted surfaces of RCC pole 9 mtr by cleaning of deposited materials, and painting with one coat of exterior emulsion weather coat paint of approved make and colour complete all as specified. And directed by Engineer-in-Charge

S & fix LT Cable End termination joining kit heat shrinkabale complete with jointing materials suitable for LT Armoured cable of size 10 to 35 Sqmm all as directed Make 3M /Denson / M-Seal

S & fix LT Cable End Termination joining kit heat shrinkabale complete with jointing materials suitable for LT Armoured cable 3.5 core of size 50 to 95 Sqmm all as directed Make 3M /Denson / M-Seal

S & fix LT Cable joining kit heat shrinkabale complete with jointing materials suitable for LT Armoured cable 3.5 core of size 120 to 185 Sqmm all as directed Make 3M /Denson / M-Seal

Supply, Installation and Fixing LT Bus Bar Feeder Pillar 160A shall be OEM made out of GRP, Glass-fiber reinforced polyester SMC as per EN 14598-1-UP FR2 material with Protection class IP 54 in accordance with IEC 60529 and Color code RAL 7032 completely dyed in mass and box shall be made out of insulating, slow-burning and self-extinguishing composite (polyester + glass fiber) characterized with resistance to atmospheric agents (UV). Protection class II (EN 61140) when correctly installed on the base and Panel internal size should be not less than 590mm x 800mm x 220 mm. GRP material shall be Anti-corrosive suitable for saline atmosphere and have ambient temperatures of -50°C up to +120°C, Flammability HB 40 a, b (EN 60695-11-10),V-1. Glow wire tested at 960°C/ 3 mm as per EN 60695-2-12. The dimensional stability under heat is more than 200 °C as per ISO 75 – 2 method A . The enclosure is Halogen-free, resistant to termites. GRP cabinet should withstand minimum Di-Electric strength of 130KV/Cm as per IEC 60243-1. he Panel box shall have shall be equipped with GRP handle lock with Manual outer locking and the provision to insert various type of locking cylinders provided to avoid unauthorized access. RoHS Directive (EU) 2015/863 (extension to directive 2011/65/EU),REACH Regulation (EC) no. 1907/2006. The Feeder Pillar with MCCB 160A FP 25KA - 1 No. Panel mounted on suitable MS Angle Stand and Aluminium Bus-bar with Heat Shrinkable Sleeves of capacity 200 Amp, wiring of Panel with suitable size of Copper Conductor Cable, Thimbles, etc. having size of the Panel suitable for fixing the Items/Materials mentioned at here-in-below, complete all as specified and as directed . Make-Hensel/ABB/Emitter/Schneider.

Material and labour for earth continuity conductor or main earthing lead using 4 mm dia galvanised iron or steel wire fixed to wall on batten or recess or chases or burried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required including taking down old wire complete all as specified and directed by Engineer-in-Charge.

Material and labour for earth continuity conductor or main earthing lead using 25 x 4mm galvanised steel strip fixed to wall on batten or recess or chases or burried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation, etc. as required including porcelain insulator saddle at the spacing nort exceeding 400mm including taking down old strip complete all as specified and directed by Engineer-in-Charge.

M&L for PCC 1:4:8 type D-2 using 40mm graded aggregate, mechanically crushed stone for mass filling in pole pit and foundation etc including provision of necessary form work to achieve fair finished surfaces complete all as specified and as directed.

M&L for PCC 1:3:6 type C-2 using 20mm graded crushed stone aggregate as in pole pole foundation, coping, stay pits etc including provision of necessary form work i.e road cutting to aachieve fair finishes surfaces, complete alal as specified and directed.

Supply, Laying, connecting testing XLPE cable 16 Sqmm 4 core PVC insulated unarmoured and over all sheathed with aluminium conductor heavy duty 1100 volts grade laid/fixing in wall, trenches, floors, ducts passing through pipe for road crossing etc complete all as directed by Engr-in-Charge.(Clamp, nut bolt, excavation, earth work, brick protection sand cushioning and GI pipe etc shall be measured & paid for separately)

Supply and laying & testing UG cable XLPE Insulated, screened, PVC bedded, wire unarmoured, electric power cables (Heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sq mm, 3.5 core, complete including disconnecting and taking out old existing unserviceable cable all as specified and directed by Engr-in-Charge.

Supply and laying & testing UG cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (Heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm, 4 core, complete including disconnecting and taking out old existing unserviceable cable all as specified and directed by Engr-in-Charge.

Supply and laying & testing UG cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (Heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sq mm, 4 core, complete including disconnecting and taking out old existing unserviceable cable all as specified and directed by Engr-in-Charge.

Supply and laying & testing UG cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (Heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 sq mm, 3.5 core, complete including disconnecting and taking out old existing unserviceable cable all as specified and directed by Engr-in-Charge.

Supply and laying & testing UG cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (Heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50 sq mm, 3.5 core, complete including disconnecting and taking out old existing unserviceable cable all as specified and directed by Engr-in-Charge.

Taking out of old serviceable / unserviceable PVC under ground LT or HT Cable of any size and type fixed on pole, wall or laid in floors, trenches, across road crossing etc ,including taking out of cable covers of precast PCC / RCC slab or brick cover etc Excavation to be paid separetely.

Re-Laying only of serviceable LT or HT UG cable of any size and type in trenches, floors, across road crossing, or fixed on poles, walls, or passing through pipe, cable here-in-before complete all as specified and as directed. Note:- i). Handling of UG cable to working site as ordered shall be carried out by the firm and rate for the same shall deem to be included in the unit rate.

Re-Laying only of serviceable brick / PCC slab cover obtained from item 40here-in-before for cable protection cover laid width wise along length of cable complete all as specified and as directed.

Supply, install and erect in true vertical position (or to be fixed in an inclined position as strut pole) steel tubular swaged poles complete with MS base plate of 6 mm thick of size 300 mm x 300 mm, finial taper plug, pole cap, bolts, nuts and washers and screwed pole made out of FRW MS tubing conforming to IS-2713 (Part-II) 1980 type 410-SP-31 ( 9 meters long ) pole including drilling of holes of required size and Nos for fixing of cross arms, painting with one coat of red oxide primer and two coats of aluminium paint for exposed surfaces and two coats of black bituminous paint for portion embeded in concrete, etc complete all as specified and directed

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth and getting out in any type of soil for laying of LT UG cables complete. Note:- The Rate quoted deemed to including cutting and removal of PSP Sheets wherever occured during excavation and the same shall be staged at desired location as directed at site

Returning, filling in, including spreading levelling, watering and well ramming in layers not exceeding 25 cm thick in hard dense soil

Removing excavated material not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point

M&L Plain cement concrete 1:4:8 type D2 using 40mm graded stone aggregate for foundation of poles complete all as specified and as directed.

M & L PCC 1:3:6 type C1 using 20 mm graded stone aggregate for coping of poles/plinth blocks of HT poles etc incl fair finishing the exposed surfaces even and smooth without using extra cement including necessary form work complete all as specified & directed.

Supply and Fixing GI tubing Medium grade 50mm dia along the wall/in trenches/in duct/in culvert/road crossing and including provisioning of suitable mild steel flat iron clamps and bolts, nuts and double washers etc for holding of GI pipe alongwith poles including taking out old broken Gi pipes, complete all as specified and as directed by Engr-in-Charge.

Supply and Fixing GI tubing Medium grade 80mm dia along the wall/in trenches/in duct/in culvert/road crossing and including provisioning of suitable mild steel flat iron clamps and bolts, nuts and double washers etc for holding of GI pipe alongwith poles including taking out old broken Gi pipes, complete all as specified and as directed by Engr-in-Charge.

Supply and Fixing GI tubing Medium grade 100 mm dia along the wall/in trenches/in duct/in culvert/road crossing and including provisioning of suitable mild steel flat iron clamps and bolts, nuts and double washers etc for holding of GI pipe alongwith poles including taking out old broken Gi pipes, complete all as specified and as directed by Engr-in-Charge.

Supply and fixing in repairs ISI mark aluminium thimbles suitable for under ground LT cables of sizes 16 sqmm including cutting of exsting burn/dammaged cable after disconnecting from exsting position ,extending the cable from cable loop including neccesory earth work and reconnecting the same.

Supply and fixing in repairs ISI mark aluminium thimbles suitable for under ground LT cables of sizes 25 sqmmincluding cutting of exsting burn/dammaged cable after disconnecting from exsting position ,extending the cable from cable loop including neccesory earth work and reconnecting the same.

Supply and fixing in repairs ISI mark aluminium thimbles suitable for under ground LT cables of sizes 95 sqmmincluding cutting of exsting burn/dammaged cable after disconnecting from exsting position ,extending the cable from cable loop including neccesory earth work and reconnecting the same.

Supply and fixing in repairs ISI mark aluminium thimbles suitable for under ground LT cables of sizes 120 sqmmincluding cutting of exsting burn/dammaged cable after disconnecting from exsting position ,extending the cable from cable loop including neccesory earth work and reconnecting the same.

S&F cable route indicator made out of 45 x 45 x 5 mm angle iron, 80 mm long embedded in PCC block of suitable size with moulded lettter HT CABLE or LT CABLE suitably incribed on CI circular plate 8 mm thick 100 dia complete including neccessary PCC 1:3:6, type C-2 (using 40 mm graded aggrregate) block of suitable size and neccessary earth work and excavation all as specified and directed.

SCHEDULE 'A' PART-II (Schedule of credit) Credit amount of Rs (Refer schedule of credit) for retrieved material mentioned in Sch 'A' Part-II of Tender documents in PDF form will be deducted offline during acceptance of tender of lowest bidder.

M/s J.S Enterprises (BID ID -3187150)

M/S GRD ENGINEERS (BID ID -3189900)

ANIKET TRADERS (BID ID -3195570)

MEELU ENTERPRISES (BID ID -3195151)

M/s Sahib Construction and engineers (BID ID -3190766)

VIDHATA ELECTRICALS (BID ID -3194405)

M/s N K Sharma (BID ID -3196008)