M/o of completed schemes (shops) under SWZ

Providing lift operators for rescue & coordination of KONE make lifts as per inventory and terms & conditions attached. (i) Lift rescue operator Gr-II- 3 Nos

Operation & maintenance of DG set, electrical & fire installations / equipment’s,FA& PA system along with duplex type Talk back system and CCTV system as per additional conditions, inventory at annexure A & preventive maintenance schedule at annexure B attached. (i) Wireman Gr-I 1 Nos ( In general shift ) (ii) Pump operator Gr-II - 9 Nos (3 No. In each shift round the clock.) (ii) Khallasi Gr-III -3 Nos (1 No. In each shift round the clock.)

Supplying & replacement of storage type lead acid battery of following rating with minimum 3 year warranty for different DG sets i/c P/F battery cable , thimbles, connections, testing etc. as reqd. a)12 V , 180 AH

Supplying, installation, Testing & Commissioning of LED surface mounted Batten light of following body material and construction as per IS : 10322 with driver (Replaceable) as per the requirement with Driver efficiency >85% ,Operating voltage AC 140-270 Volt, freq 50/60 hz, Operating temp range -15 deg to 40 deg centigrade, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P. F.≥0.95, IP20, CRI >80, Flicker free, (flicker should be below 5 %), life time (LED,Driver & electrical circuitary), of minimum 50000 Burning Hours with , 70% of initial Lumen maintained till life ends, CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard and trade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. complete in all respect i/c connections with 1.5 sq mm FRLS, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 <120 lm/Watt output . LM79 & LM80 Test report from NABL lab for all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminum housing such that LED junction temperature shall not rise above 90°C). Powder coated CRCA sheet Body (Thickness ≥ 0.5 mm).

Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required. 250 Amp

Supplying & Replacement of 3 Pole Power Contactors of following rating in the existing panel board suitable for 415 volt, 50 Hz, 3 Phase AC supply i/c connection testing commissioning etc. complete as reqd. a) 125 Amp,AC-3, Type ML-6

a) 100 Amp, AC-3, Type ML-4

b)45 Amp, AC-3, Type ML-3

Providing and fixing following rating and breakingcapacity and pole MCCB with thermomagneticrelease and terminal spreaders in existing cubiclepanel board including drilling holes in cubicle panel,making connections, Ics=100% Icu and OperationalVoltage 690V etc. as required. a) 250 A,50KA,FPMCCB

b) 200 A,36KA,FPMCCB

c) 125 A,36KA,FPMCCB

Supply and drawing of following sizes of FRLS /HFFR/PVC insulated ,single core copper conductor cable in the existing surcace / recessed steel / PVC conduit as required. a)2x1.5 sq. mm

b)2x4 sq. mm

Dismantling and repairing i/c S/R of following worn out parts of existing 12.5HP clear water pump of kirloskar make suitable for operation on 415 volts , 3 phase ,50 hz ,AC supply i/c re-assembling/re-installation the same, connection with suction and delivery line, valves, testing etc. completed as reqd:- (i) S/R of Pump shaft (SS)- 1 No.

(ii) S/R of Bal bearing - 2 Nos.

(iii) S/R of Gland plate- 2 Set

(iv) S/R of Gland bush- 2 Nos .

(v) S/R of impeller- 1 Nos .

Dismantling and rewinding i/c S/R of following worn out parts of existing 12.5HP kirloskar make Induction motor(for clear water) i/c re-assembling/re-installation the same, connection with suction and delivery line, valves, testing etc. i/c rotor turning,coupling,connection plate etc.completed as reqd:- (i) Rewinding of 12.5 HP motor - 1No.

Supply Installation,Testing and commissioning of 1200 mm sweep,BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85,Air delivery minimum 215 CMM,350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm,suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.

Servicing of 100/125 KVA DG set (Cummins make engine) i/c supply and replacement of following items testing etc complete as required. i) Oil Filter - 2 Nos ii)Diesel Filter -2Nos. iii) Air cleaner element- 1 set iv) Coolant- 5 ltr v)Battery terminal- 4 Nos. vi)Engine oil-35 ltr

Servicing of 25/40 KVA DG Set (Kirloskar make engine) i/c supply and replacement of following items testing etc complete as required i) Oil Filter -1 No. ii) Diesel Filter -1 set. iii) Air cleaner element-1 set iv) Coolant-3 ltr v) Battery terminal-2 No vi) Engine oil-10 ltr

Repairing of AMF panel of 125KVA//100KVA D.G set with supplying and replacement of following parts i/c connection testing& commissiong etc complete as required. a) panel comlpete wiring with materials-1No b)Battery charger 24 volt -1 No c)Relay 8 pin-2 nos. d)Relay 4 pin-2 Nos e)starter Relay-1 No f) push button -2 Nos. g)panel repairing and servicing charges.

Repairing of AMF panel of 40KVA D.G set with supplying and replacement of following parts i/c connection testing& commissiong etc complete as required. a) panel comlpete wiring with materials-1No b)Battery charger 12 volt -1 No c)Relay 8 pin-2 nos. d)Relay 4 pin-2 Nos e)starter Relay-1 No f) push button -2 Nos. g)panel repairing and servicing charges.

Supply and Replacement of Automatic star delta starter suitable upto 125 HP centrifugal pump sets suitable for 415 volt,50 Hz AC supply,i/c dismantling the Existing damaged/burnt out i/c connection,testing etc completed as required

LED Flood Light, powder coated pressure diecast aluminium (System lumen efficacy ≥105 <120lm/Watt).Supplying, Installation, Testing & Commissioningof Flood Light, powder coated pressure die castaluminium body with built in or separate driver asper the requirement with Driver efficiency>85%, Input voltage: Input voltage: 140-270 Volt AC,frequency 50/60 hz, Operating temp range -5 0C to52 DELHI SCHEDULE OF RATE (E&M) 2025 ,50 0C, internal surge protection of 5 KV L,N,E as perIEC 61000-4-5, Driver efficiency >85%,THD < 10%as per IEC 61000-3-2, P. F.≥0.95, IP-66,IK-10, CRI >70, under voltage and over voltage protection,EMI-EMC as per CISPR -15, lenses for beamangle 30 deg-120deg as per the application and the project requirement., suitable tilt able fitting, life time(LED, Driver & electrical circuitry) of minimum 50000Burning Hours with 70% of initial Lumen maintained till life ends as per LM80extrapolation IES TM-21-11 report, CCT 3000°K /4000°K / 5700°K /6500°K (As per ANSI Bin) , SDCM(Standard Deviation Color Matching) <5,Maximum power consumption should not morethan the specified rating and Fixture shall be ofrelevant BIS standard complete in all respect i/cexternal connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductorsingle core cable and earthing etc. as required withMinimum 5 year OEM warranty. System lumenefficacy ≥105 <120 lm/Watt output .LM79 & LM80Test report and all testing required for LED fixtures as per BIS shall be submitted.. Shape sizeand CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management:heat sink of aluminium housing such that LEDjunction temperature shall not rise above 90°C) a) 150 watt.

Supplying of following size of XLPE aluminum conductor armoured power cable of 1.1 KV grade including providing & fixing thimbles connection,testing etc as required at site .a) 2CX10 sq.mm Size

Laying and fixing of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 kv grade of following size on wall surface as required.a) UP to 35 sq.mm ( clamped with 1mm thick saddle.)

Dismantling and reparing i/c S/R of worn out parts of existing 3HP Dewatering pump(sewage sub.type/weda type) i/c re-assembling/re-installation the same, connection with suction and delivery line, valves, testing etc. completed as reqd:-

Supplying and fixing 3 inch flexible hosepipe for dewatering pump in basement i/c connection,testing complete as required

Please Enable Macros to View BoQ information