138WE/L-111/2025-26

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but including backing), rubbish off the premises complete all as specified and/or as directed by Engr-in-Charge.

M&L for 25 mm thick PCC 1:2:4 type B-0 using 12.5 mm graded crushed stone aggregate as in levelling course to floor complete all as specified and/or as directed by Engr-in-Charge.

M&L for glazed ceramic coloured tiles in vertical surfaces of size 450x350x7mm/ 350x250x7mm thick set and jointed in neat cement slurry and pointed with white or coloured cement to match over and including rendering 10 mm thick in cement mortar (1:4) as in backing coat complete all as specified and/or as directed by Engr-in-Charge.

M&L for Non - skid coloured Ceramic joint free tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and/or as directed by Engr-in-Charge.

M&L for Vitrified tiles (light shade) 10 mm thick in size of 600mmx600mm as in floors/skirting/dados set and jointed in neat cement slurry and pointed in white or coloured cement to match and laid over 15mm thick cement slurry in CM 1:4 complete all as specified and/or as directed by Engr-in-Charge.

M&L for Non - skid joint free coloured Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and laid over jointed in 15mm thick screed bed in CM 1:4 complete all as specified and/or as directed by Engr-in-Charge.

M&L for Coloured endura tiles, of approved make of size 300mmx300mm/400mmx400mm, 10 mm thick, set & jointed and pointed in neat cement slurry, with grey cement and no pigment, laid in floors, over and including 20mm thick screed bed in cement mortar 1:4, complete all as specified and/or as directed by Engr-in-Charge.

Taking down chowkhat or frame with shutters (without taking of shutters from the frame) exc 1.5 sqm each but not exc 4 sqm each any type of door (wooden, aluminium & steel etc) complete all as specified and/or as directed by Engr-in-Charge.

Taking down chowkhat or frame with shutters (without taking of shutters from the frame) not exc 1.5 sqm each any type of door (wooden, aluminium & steel etc) complete all as specified and/or as directed by Engr-in-Charge.

S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed by Engr-in-Charge.

S&F Powder coated (minimum thickness of powder coating 50 micron) anodised aluminium door shutters, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading screws anodised aluminium fittings such as peg stays 150mm long (1 No.), hinges type B-21 100mm long (2 Nos.) suitable handle (1 No.)etc., complete all as specified and/or as directed by Engr-in-Charge.

M&L for plain sheet glass 4.00mm thick ordinary quality and glazing with oil putty or wooden beads in square or fixed with aluminium section including rubber beads not exc 0.50 sqm in each pane complete all as specified and as directed by Engr-in-Charge.

M&L for plain sheet glass 4.80mm thick ordinary quality and glazing with oil putty or wooden beads in square or fixed with aluminium section including rubber beads not exc 0.50 sqm in each pane complete all as specified and as directed by Engr-in-Charge.

S&F in repair Door closer hydraulically regulated designation No 3 universal type, aluminium body suitable for door shutters of up to 700 mm in width and weight not more than 35 Kg and fixed complete all as specified and directed.

M&L for factory made brown colour solid WPC (wood particle composite) door frame of size 100 mm 63 mm single rebate 100% lead free made from single extruded process material with density 0.78 Kg/RM complete all as specified and/or as directed by Engr-in-Charge.

S&F 30 mm factory made solid WPC (wood particle composite) moulded door shutter single extruded with 2, 4 or 6 raised panel design on the front side with 10 mm deep mould on single side, with wood grain texture. The density of the door shutter not less than 600Kg/Cum should be 100% lead free door complete all as specified and directed.

S&F 2nd class soft wood as in plain solid straight chowkhats wrought framed rebated on the solid put together on with glue pinned at joints, complete all as specified and/or as directed by Engr-in-Charge.

S&F 30mm thick 2nd class softwood, plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkhats, complete all as specified and/or as directed by Engr-in-Charge.

S & F 30 mm thick 2nd class softwood, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkhats, complete all as specified and/or as directed by Engr-in-Charge.

S&F 200mm long aluminium anodised barrel tower bolt of extruded section in old or new position

S&F 150mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and/or as directed by Engr-in-Charge.

S&F aluminum door handle cast type 150 mm in old or new position

S&F 100mm long mild steel medium weight but hinges cold rolled.

Taking down cement plaster on brick/pcc block or concrete surfaces including racking out joints hacking for key, scrubbing down with water etc., complete all as specified and/or as directed by Engr-in-Charge.

M&L rendering 15mm thick in CM 1:4 on fair faces of concrete or brick surfaces as in wall finished even and smooth w/o using extra cement complete all as specified and/or as directed by Engr-in-Charge.

M&L rendering 15mm thick in CM 1:6 on other than fair faces of concrete or brick surfaces as in wall finished even and smooth w/o using extra cement complete all as specified and/or as directed by Engr-in-Charge.

M&L for Preparing newly plastered surfaces of walls and applying two coats of acrylic emulsion paint over a coat of primer over a coat of wall care putty applied till the surface is smooth etc. complete all as specified and/or as directed by Engr-in-Charge.

M&L for complete removing of existing treatment on old wall surfaces and applying two coats of distemper oil emulsion over a coat of primer including 1mm thick birla wall care putty finished smooth to receive the surface application complete all as specified and directed

Demolition of cement concrete (un reinforced ) in ground floors and pavings not exc 15cm thick (below or above ground level ) and removing debris off the premises complete all as specified and as directed by Engr-in-Charge.

Dismantling plain or corrugated steel sheeting any gauge or thickness including nanital or similar pattern complete all as specified by Engr-in-Charge.

S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and/or directed by Engr-in-Charge.

S&F rolled section as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guide, complete all as specified by Engr-in-Charge for sliding doors fixed with angle cleats or other connecting plates Fe -410 Gde E-250 Quality-A, complete all as specified and/or directed by Engr-in-Charge.

Dismantling structural steel work including doors and gates of any description.

Preparation of new/ previous untreated corrugated steel surface of any description over 10cm grith or width, not otherwise described with one coat of red oxide zinc chrome primer followed by two coats of synthetic enamel paint complete all as specified and directed.

Dismantling of water tank of any description capacity exc 500 ltr and not exc 1000 ltr complete all as specified and directed by Engr-in-Charge.

S&F 1000 ltr capacity rotational moulded polythelene water storage tanks triple layer white colour (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part 1 complete all as specified and directed .

Taking up or down steel tubing 25mm to 32 mm bore including cleaning for refixing or removal to store, complete all as specified and/or directed by Engr-in-Charge.

S&F 25mm bore 3-layer PP-R Polypropylene random copolymer concealed pipes SDR 7.4 (PN 16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass treaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. complete all as specified.

Dismantling of 75 / 110mm bore cast iron, PVC or reinforced concrete pipes jointed in cement mortar and taking out of trenches if reqd of any dia

S&F 110 mm bore PVC (SWR) pipe single socketed, in any length with rubber joints laid in trenches or in floors.

S&F 75 mm bore PVC (SWR) pipe single socketed, in any length with rubber joints laid in trenches or in floors.

S&F 75mm bore PVC (SWR) pipe bends any radius

S&F in repairs PVC (SWR) 110mm bore bends any radius, complete all as specified

S&F in repairs PVC (SWR) 110mm bore junction single (single T), complete all as specified

S&F 75mm bore PVC (SWR) junction single, (Single T) equal or unequal

M&L 75 mm bore PVC (SWR)) multi floor trap with grating including jointing with solvent cement

S&F PVC (SWR) 75mm bore vent cowl complete all as specified

S&F PVC (SWR) 'S' trap 110mm bore for EWC/IWC

S&F in repair single piece china wash down water closet, with UF soft close seat cover, hinges, accessories set, cistern fittings size 370x690x795mm, complete all as specified and directed. Make: Jaquar Cat No. KUSWHT-358515N or equivalent approved make as approved by GE.

S&F Vitreous china wash basin white flat back size 600 x 480 mm excluding taps, waste, chain, plug and porcelain stopper including CI brackets of angle iron 65 x 65 x 6mm embeded in PCC block with PCC 1:2:4 type B-1 & CP grating with holes fixed in repairs complete all as specified and directed.

S&F in repairs 20mm bore stop cock fancy type chromium plated cast copper alloy screw down under high pressure screwed both ends for iron pipe or brass ferrule, complete all as specified and/or directed by Engr-in-Charge.

S&F in repairs wash hand basin table top type fixed on granite top grooving and cutting if required complete all as specified and directed. Make: Jaquar cat No SLS WHT-6011 or equivalent approved make as approved by GE.

S&F pillar tap single lever long body with 150 mm extension body fixed on granite top for supply of hot or cold water fixeing with washers complete all as specified and directed. Make Jaquar Cat No. ARI 39005B or equivalent approved make as approved by GE.

S&F in repair hand shower (health faucet) CP with 8 mm dia. 1.2 Metre long flexible tube and wall hook complete all a specified and directed. Make : Jaquar Cat No. ALD-573 or equivalent approved make as approved by GE.

S&F in repair chromium plated paper holder fixed on walls complete all as specified and directed. Make: Jaquar Cat No: AKP-CHR-35753P or equivalent approved make as approved by GE.

S&F in repair angle valve (one way) 15 mm bore cast copper alloy fancy type, chromium plated with cup complete all a specified and directed. Make: Jaquar Cat No: ARI-39053 or equivalent approved make as approved by GE.

S&F in repair chromium plated brass bib tap fancy type screwed down, screwed for iron pipe or for brass ferrule 15 mm bore complete all a specified and directed. Make: Jaquar Cat No: ARI-39037 or equivalent approved make as approved by GE.

S&F in repair glass shelf corner fixed on walls with screws complete all as specified and directed. Make: Jaquar Cat No: ACN-1173 or equivalent approved make as approved by GE.

S&F in repair towel rack chromium plated brass fixed to walls with screws complete all as specified and directed. Make: Jaquar Cat No. AKP-35781PS or equivalent approved make as approved by GE.

S&F in repair CP brass towel ring fixed with and incl CP brass screws and complete all a specified and directed. Make: Jaquar Cat No: AQN-7721 or equivalent approved make as approved by GE.

S&F in repair Soap dish fixed with and incl CP brass screws complete all a specified and directed. Make: Jaquar Cat No: AKN-35731P or equivalent approved make as approved by GE.

S&F chromimum plated brass 32 mm coupling for table top wash hand basin half or full thread fixed complete all as specified and directed. Make: Jaquar Cat No. ALD-725 or equivalent approved make as approved by GE.

S&F PVC connections 15mm size with CP nuts of length 600mm complete all a specified and directed. Make: Jaquar Cat No. ALD-8058 or equivalent approved make as approved by GE.

S&F in repairs Harrision rails, anodised alloy, with fixing end brackets, stops, dooms etc. complete set fixed on wall or wall panels complete all as specified and directed by Engr-in-Charge.

S&F Grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms)

S&F PVC waste pipe 32mm bore with cup and washers complete on new or old locations, complete all as specified and/or directed by Engr-in-Charge.

Demolition brick work / block masonry or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and/or directed by Engr-in-Charge.

M&L precast cement concrete 1:3:6 type C-1 (20mm graded crushed stone aggregate) as in block masonry with solid blocks, exc.10cm in width and set in cement mortar 1:6, complete all as specified and/or directed by Engr-in-Charge.

S&F in repairs Sinks stainless steel with drainage board made of 1.0 mm thick kitchen or laboratory with plugs, washers and wastes; including fixing cantilever brackets and connecting union to pipe overall size 915mmx460mm bowl size 410mm x 330mm x 160mm, complete all as specified and/or directed by Engr-in-Charge.

S&F in repairs 25mm PP-R Gate valves (brass insert) conforming to ISO 2000 screw down end for PPR pipe or for union and fixed, complete all as specified and/or directed by Engr-in-Charge.

S&F 18/19 mm thick PVC solid double side prelam celluka board of approved colour fixed with screws as in modular kitchen cabinets/cupboards including lipping portion match with laminated colour complete all as specified and directed.

S&F in repairs 100mm long extruded brass handles, fabricated type polished complete all as specified and directed by Engr-in-Charge.

S&F in repairs 30mm width of flaps (when open) continous (piano) hinges, brass complete all as specified and/or directed by Engr-in-Charge.

S&F in repairs magnetic catcher with 8mm dia ball and brass body and stricking plate complete all as specified and/or directed by Engr-in-Charge.

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc. complete all as specified dicrect by Engr -In- Charge .

M&L for Granite 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite black, complete all as specified and/or directed by Engr-in-Charge.

Dismantling wall and ceiling boards (Fiber, pulp, insulation, blankets) any thickness including covered fillets and supporting members.

M&L for providing and fixing Gypsum boards 9 mm thick PVC film on the face side and other side metalised polyster flim as in ceilings fixed with screws as per manufacturers instructions including anodised aluminium powder coated snap grid frame work of size 605 x 605 mm with anodised aluminium channel supports/ angles/ 'T' (Main tee 35 x 25 x 1.5 mm, cross tee 25 x 25 x 1.4 mm and wall angle 32 x 32 x 2 mm) fixed with screws/ plugs etc including GI suspenders of 6mm dia upto 1200 mm length adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3 mm size as per approved pattern and design complete all as specified and directed by Engr-in-Charge.

S&F of wooden panelling on vertical surface of wall using following specifications complete all as specified and directed:- (a) S&F 2nd class hard wood wooden gutties of size 25mmx25mmx200mm depth fixed in wall by making holes in brick wall and making good in cement mortar 1:3. (b) S&F horizontal runner 2nd class soft wood (Kail) (at 120 c/c of sectional area exc. 13 Sqcm and not exc 25 Sqcm clean sawn treated with two coats of creoste oil mixed with good quality pesticide for antitermite treatment. (c) S&F 1st class soft wood (Deodar) boarding 12mm to 15mm thick as in wall panelling planed one side, wrought and other side clean sawn and applying two coats of good quality varnish on plain surfaces over a coat of primer mixed with good quality pesticide for antitermite treatment on the other side and fixed with screws/nails on wooden runners. (d) S&F 1st class soft wood (Deodar) decorative beading 40mm wide on top surface of wall panelling including two coats of varnish.

M&L for 10mm thick teak wood finish laminated wooden flooring interlocked with each others and its size as directed, over 6 micron polyethylene sheeting over the concrete to minimize moisture migration from the concrete complete all as specified and directed by Engr-in-Charge.

M&L for 2nd class softwood clean sawn as in scantling fixed with nails exceeding 13 Sqcm and n.exc 25 Sqcm in section, complete all as specified and/or directed by Engr-in-Charge.

Dismantling boarding, any description, fixed in any position with nails.

Taking down carefully copper/aluminium point wiring (light, fan, socket and power point) complete fittings such as switches, ceiling rose, regulators, socket etc. and removing material from site and making good disturbed surfaces of walls, floors/ceiling to match the existing surface all as specified and directed by Engr-in-Charge.

Point wiring complete with 1.5Sq.mm nominal area of copper conductor multi stranded PVC insulated and unsheathed 1100 volts cable drawn through & including PVC casing & caping with standard accessories such as elbows, tees, junctions etc. and PVC moulded terminal box with top cover of including PVC insulated unsheathed solid 1.5Sqmm copper conductor cable as continuous earth lead all as specified and directed for the following:-

One light/exhaust fan point controlled by one way switch complete all as specified and directed.

One switch socket outlet 6 Amps, 230 volts point on same board complete all as specified and directed.

One switch socket outlet 6 Amps, 230 volts point on independent board complete all as specified and directed.

All as item No 85 above, but using cables 2.5 Sq mm size for independent power point complete all as specified and directed.

S&F in replacement of lamp holder insulated body with back plate complete all as specified and directed.

S&F switch piano flush button single pole 6 Amps 230 volts one way complete all as specified and directed.

S&F socket outlet 3 pin 6 Amps flush type.230 volts complete all as directed.

S&F switch Socket combination outlet multi purpose 5 pin 6 Amps and 16Amps 230 volts complete all as directed.

S&F switch socket combination 3/5 pin 5/6 Amps 230 volts complete all as directed.

S&F ceiling rose, surface Bakelite three terminals complete all as directed.

S&F in replacement of sheet metal enclosure for DBs double door when MCB's to be used single pole & neutral 240 Volts 8 Ways complete all as specified and directed.

S&F in replacement of sheet metal enclosure for DBs double door when MCB's to be used single pole & neutral 240 Volts 12 Ways complete all as specified and directed.

S&F in replacement of sheet metal enclosure for TPN' DBs with 200Amps rates bus bar of 8 way 415 volts with blank plate complete with double door complete all as specified and directed.

S&F in replacement of sheet metal enclosure for DBs double door with provision of MCCB up to 250 Amps TPN 415 volts 8 ways including MCCB 160 Amps 4 pole 25 KA, magnetic thermal release complete all as specified and directed.

S&F MCB SPN 40-63 Amp, 'C' series, 240 Volts, AC ISI marked complete all as specified and directed.

S&F MCB SP 6-32 Amp, 'C' series, 240 Volts, 50 HZ, complete all as specified and directed.

S&F MCB TPN 100 Amps 'C' series, 240 Volts 50 HZ complete all as specified and directed.

S&F in replacement of MCB DB SPN Regal Gray 12 Way double door 240Volt 50Hz complete all as specified and directed.

S&F in replacement of decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly energy efficient ready to use pack 20 Watts LED 6000K with connection 3 core copper wire from ceiling rose to fitting with complete accessories complete all as specified and directed.

S&F in replacement of LED 36 watts recessed 2x2 luminaire Warm /Cool White & glare free, soft illumination and connection of 3 core copper wire with all accessories complete all as specified and directed.

S&F for sub main wiring with 2 runs of FRLSH PVC insulated multistrand, copper conductor cable of size 2 x 10 sq. mm +1x10 sq. mm PVC insulated cable 1100 volts multi stranded copper conductor as earth wire in required in existing surface recessed PVC conduit incl taking down old one complete all as specified and directed.

M&L for submain wiring along with earth wire with the following sizes of FRLSH PVC insulated copper conductor, single core cable in surface/recessed as required in PVC casing caping wire size 2x4.0 sq. mm + 1x4 sq. mm earth wire complete all as specified

M&L for submain wiring along with earth wire with the following sizes of FRLSH PVC insulated copper conductor, single core cable in surface/recessed as required in PVC casing caping wire size 2x6.0 sq. mm + 1x6.0 sq. mm earth wire complete all as specified

S&F exhaust fan made of sturdy engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm complete connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S&F in replacement Air circulator made of sturdy engineering plastic complete with louvers, shutter, voltage 230 volt, 50 Htz RPM 1200, copper winding of sweep 250 mm complete all as specified and directed by Engr-in-Charge.

S&F LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete.

Supply and fix LED light fitting 1 x 16/18 W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

S&F LED light fitting mirror type with high output diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete.

S&F in replacement of old U/S Lamp LED 7/9 Watt, 230 volts 50 Hz AC complete all as specified.

Excavation in trenches not exc. 1.5m wide and not exc. 1.5m in depth, for foundation etc. or for shafts, wells cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5m in depth in soft/loose soil and getting out, complete all as specified and as directed.

Excavation in trenches, not exc 1.5m wide & not exc 1.5m in depth for foundation etc in hard and dense soil & getting out for laying of cable complete all as specified and directed.

Returning, filling in (soil), including spreading, levelling, watering and well ramming in layers not exc. 25cm, complete all as specified and directed by Engr in Charge.

Removing excavated material to a distance not exc. 50m and depositing where directed at a level not exc. 1.5m above the starting point, complete all as specified and directed by Engr in Charge.

M&L for Sand cushioning to under ground cables 8 cm below the cable before laying & 15 cm above the cable after laying, complete all as specified in clause 19.75 of SSR Part-I, 2009. Note : Punned thickness only will be measured and paid.

Supply and laying of factory made, machine pressed, unreinforced, pre-cast concrete cable cover class LV type-2 flat size 250 mm x 150 mm x 40mm, complete all as specified and directed.

Taking out unserviceable LT UG cable for relaying/ replacement any size cable all as directed by Engr-In-Charge. Note:- Excavation and earth work shall be measured paid separately under respective item.

Supply and lay in trenches or passing through pipe or fixed on surface XLPE insulated, armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade of under mentioned sizes :-

70 Sqmm 3.5 core

50 Sqmm 3.5 core

M&L in replacement of 40 mm GI Pipe light grade for cable protection in road crossing including cutting to required depth and making good surface road surfaces by filling with PCC 1:2:4 type B2 using 40mm graded stone aggregate complete all as specified and directed by Engr in Charge.

M&L in replacement of 50 mm GI Pipe light grade for cable protection in road crossing including cutting to required depth and making good surface road surfaces by filling with PCC 1:2:4 type B2 using 40mm graded stone aggregate complete all as specified and directed by Engr in Charge.

M&L for chemical earthing complete with copper plate of size 90 x 60cm x 5mm uses as electrode thick buried directly in ground vertically to a depth not less than 2.25 meters deep below ground level with top edge of the earth plate not less than 1.5 meters deep below normal ground level, connected with and including copper strip of size 32 x 6mm connected to main test point as directed as earthing lead by means of brass nuts, bolts and washers protected by 40mm dia (medium grade) GI tubing, funnel, wire mesh, 20mm bore GI tubing (light grade) watering pipe, including concrete pit in PCC (1:3:6) type C-1, precast RCC (1:2:4) type B-1 cover slab of size 350 x 350 x 50mm reinforced with 8mm dia TMT bars @15cm c/c in both ways and 10 mm dia MS handle (01 No) of suitable size for lifting of cover slab, filling with suitable chemical as required by which appropriate value will achieved for equipment's including necessary excavation and earth work in soft/loose soil all as shown in Electric plate No 3 of SSR Part-I and testing on completion, complete all as specified and/or as directed by Engr-in-Charge. Note : If the desired value is not achieved, earthing shall be re-done by contractor with no extra cost.

S&F solid copper conductor as earthing lead 8 gauge/ 4 mm dia connected with appropriate size of copper lugs nut bolt washer as reqd at site, complete all as specified and/or as directed by Engr-in-Charge

M&L for earthing complete with Copper earth plate 600 x 600 x 6 mm buried directly in ground vertically to a depth not less than 2.25 metre below normal ground level with top edge of the earth plate at a depth not less than 1.5 metre below ground level connected to and including copper strip of size 20×3mm by means of nuts, bolts, washers etc made of and connected to test point and earth dolly as all shown in electrical plate No.3 of SSR Part-I 2009 and specified or indicated including excavation and earth work in any type of soil PCC (1:3:6) type C1 in chamber, pre cast RCC slab 50mm thick in cement concrete (1:2:4) type B1, reinforced with welded steel wire fabric or XPM jali (weight not less than 4.0 kg/Sqm) with cast iron frame, funnel, with wire mesh, 20mm bore light grade GI watering pipe, lugs, 15mm bore light grade GI protection pipe, test point etc complete all as specified and directed. Note: (i) Item includes the cost of 7.5 m GI pipe for protection of earth lead. (ii) Item includes the cost of 7.5 m copper earth lead.

M&L for earthing complete with galvanised steel earth plate electrode 600 X 600 X 6mm thick buried directly in ground vertically to a depth not less than 2.25 meters deep below ground level with top edge of the earth plate not less than 1.5 meters deep below normal ground level, connected with and including galvanised iron strip of size 25 x 4mm connected to main test point as directed as earthing lead by means of nuts, bolts and washers of galvanised iron protected by 40mm dia (medium grade) GI tubing, funnel, wire mesh, 20mm bore GI tubing (light grade) watering pipe, including concrete pit in PCC (1:3:6) type C-1, precast RCC (1:2:4) type B-1 cover slab of size 350 x 350 x 50mm reinforced with 8mm dia TMT bars @ 15cm c/c in both ways and 10mm dia MS handle (01 No) of suitable size for lifting of cover slab, charcoal and salt in alternate layers including necessary excavation and earth work in soft/loose soil all as shown in Electric plate No 3 of SSR Part-I and testing on completion complete all as specified and directed by Engr-in-Charge.

M/S SHAMSHER ALI SUFI (BID ID -3376708)

R B TRADERS (BID ID -3369139)

Mehar Enterprises (BID ID -3378350)