CERTAIN REPAIR TO JOINERY PLUMBING AND OTHER MISC WORK IN CABS STIR AND CEMILAC AT BANGALORE

Amount

Demolition of brick work built in cement mortar including pre cast articles etc complete all as directed

Demolition of cement concrete (unreinforced) of of any descriptions, in Ground floors (Floor Topping, Sub Base etc) not exc 150mm thick, above or below ground level ..

M&L for PCC 1:5:10 type E2 (using 40 mm graded aggregate) cement concrete as in mass concrete.

M & L PCC 1:3:6 type C-2 using 40 mm graded stone aggregate as in plinth protection 75 mm thick finished even and fair all as specified.

Removing of demolition materials to a distance exc. 1.5 KM, but n.exc 5.0KM and depositing out side MD land.

M&L brick work with sub class 'B' bricks straight or curved in plan exc 6 mtr mean radius built in CM (1:6) using old size bricks.

Taking down plastering on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc.

M&L Rendering 15 mm thick stone masonry wall surfaces in CM 1:6 finished even and smooth without using extra cement.

M&L Rendering 10 mm thick Cm 1:4 on fair faces of Brick masonry or concrete surface wall even and smooth without using extra cement.(New Brick Work)

M&L prepration of new surface on wall and applying two coats of distemper oil emulsion over a coat of primer complete all as directed

Material and labour for two coat of cement based paint over a coat of Alkali resistant primer including preparation of newly plastered surfaces of wall / chajja / facia complete

Taking down Chowkats or Frame (without taking off shutter from the frame) exc. 1.50 SQUARE METRE but n exc 4.00 Sqm each .

Taking down Chowkats or Frame (without taking off shutter from the frame) n exc. 1.50 Sqm

Taking down shutters of any description but exc. 1 Sqm and n exc. 3 Sqm each .

Taking down shutters of any description n.exc 1 Sqm each.

S&F Anodised aluminium powder coated frame for doors window,partition and ventilatore with one or more rebates including joining cleat forfixing etc. complete all as specified

S&F Anodised aluminium powder coated door shutters,aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges,anodised aluminum snap beading screws etc. complete all as specified

S&F Anodised aluminium powder coated window and ventilators shutters,aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges,anodised aluminum snap beading screws etc. complete all as specified

S & F sheet glass 5.5 mm thick ordinary quality frosted on one side in exc 0.5 Sqm in each pan with rubber beading as in doors and partion.

S&F Prelaminated particle board 12 mm thick, exterior grade,prelaminated both side with decorative choice lamination &other side balancing white lamination,fixed with screws to timber frame work as in aluminium door and partion.

S & F sheet glass thick ordinary quality in exc 0.5 Sqm in each pan 4 mm thick with rubber beading as in window complete all as specified

S & F for venetian blinds verical type 100 mm width with approved fabric and powder coated aluminium fittings such as top rails metal weight nylon button loops etc to match with the top rail metal base complete all as specified including dismantling unserviing one.(Make:VISTA,MAC&MARC)

S & F in repairs Mortice locks 100mm size brass four levers vertical type complete all as specified and as directed.

M&L Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass,other parts made of mild steel heavy duty and fixed complete.

S & F in repairs Door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed (Aluminium extruded section body)

S&F black/golden colour solar control film 50 micron reflective type sticked to glass panes as per instruction of manufacturer including taking down existing damaged films.

Supply and fix 100 mm size Butt hinges, medium weight cold rolled mild steel as in repairs all as specified and as directed.

Supply and fix 150 mm long aluminium anodized barrel tower bolts of extruded section all as specified and as directed in repairs.

Supply and fix 150mm long extruded aluminium alloy handles, fabricated type, anodized all as specified and as directed.

Supply and fix 250mm long extruded aluminium sliding bolt aldrop bolt, fabricated type, anodized all as specified and as directed.

S & F for aluminium anodisted floor door stoper for aluminium ally body and tongue anodised with hard drawn steel srping fixed in floor 150 mm long.

Hacking out old brocken glass of any thickness size quality or description from wooden frame or stone concrete or brick.

S & F sheet glass 3mm thick for window ordinary quality frosted on one side in exc 0.5 Sqm in each pan with rubber beading as in doors and partion.

S&F 2nd class Hard wood plain solid straight Chowkats and frame wrought framed rebated on the solid rounded or chamfered put together with shine pinned at joints supply and fitted .

S&F 35 mm thick flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification & drawing on page No 149 of SSR Part -II complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS square tube for top and bottom rials. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having PVC sheet strip 20 mm wide stuck inside with solvent cement for styles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail, bottom rail panelling of plain colour PVC sheet to be fitted in MS frame welded/ sealed to the styles and rails with suitable sheet beading, and jointed together with solvent cement, supplying & fixing in the frame at site as per specification drawing of page No 147 of SSR Part-II .

M&L Cutting holes in brick walls built in cement mortar for inserting holdfast and making good the dismantled portion in cement 1:3 or cement concrete 1:2:4 type B-1 all as specified and as directed depth of embeded portion of holdfasts or lugs measured from the face of the Jamb into wall exc half brick but not exc one brick .

M&L PCC 1:3:6 type C2 (using 40mm graded crusted stone aggregate) as in holdfast block including necessary formwork etc .complete all as specified

M&L mild steel flat iron as in hold fast size 25 x 3 for door window frames or chowkat etc, cut to length or drilled hole and fixed with screw etc complete all as specified and directed grade of steel conforming to Fe- 290 Gde E-165 complete all as specified and directed.

M&L for preparing surfaces of wood and wood based materials treating ends of post, backs of chowkats etc area tarred exc 0.1 Sqm but n exc 0.5 Sqm each .

M&L for treating small aricle such as stops, covers, gully, gratings and hold fast ends & post backs of chowkat etc area n exc 0.10 Sqm each .

M & L for Sheet Glass, 3.0mm thick glazing with Beads or Oil Putty, not exc. 0.50 sqm in each pane complete

M&L appying two coats Synthetic enamel paint over a coat of pink primer on wooden surface any description over 10 cm in width or girth not otherwise described including preparation complete

S & F 100 mm long aluminium anodised barrel tower bolt of extruded section .

S & F 100 mm long aluminium alloy handle febricated of extruded section .

Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

M&L for pcc 1:2:4 type B1, average thickness 40-70 mm thick using 20 mm graded stone aggregate as in flooring/ paving finished rough to receive cement tiles complete all as specified

M&L Vitrified ceramic tiles of size 10 mm thick Double Charged light shade, area of each tile n.exceeding 0.36 sqm in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed(MAKE:HR JOHNSON/KAJARIYA/SOMANY)

M&L Vitrified ceramic tiles of size 10 mm thick Double Charged light shade, area of each tile n.exceeding 0.36 sqm in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick screed bed in cement mortar 1:4 complete all as specified and directed(MAKE:HR JOHNSON/KAJARIYA/SOMANY)

M&L Granite (of any type) work 20 mm thick (table rubbed and polished)in steps, jambs, pillars, windowcills, cooking platforms and like in including cement mortar (1:4) pointing in white cement (1:2) using marble dust with admixture of pigment to match.

M&L Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in cm 1:6.(MAKE:HR JOHNSON/KAJARIYA/SOMANY)

Material and labour for glazed coloured ceramic tiles in vertical surfaces for wall tiles of size 450 x 300 x 7 mm thick as in dados, set and jointed in neat cement slurry and pointed in coloured cement to match coloured tiles with joint free including 10mm thick screed bed in cm 1:4.(MAKE:HR JOHNSON/KAJARIYA/SOMANY)

Dismantling boarding, any description, fixed in any position with screw

Supply and fixing of armstrong ceiling system with fine fissured edge tiles having humidity resistance (RH) of 95%, NRC 0.34 light reflectance approx 84% Thermal conductivity K=0.052 - 0.057. W/mk colour white fire performance of class-I as per BS 476 part 6 & 7 in module size of 600 x 600 x 16 mm thick suitable ofr green building appliation with recycled content of 38-41% with Armstrong silhouette profile exposed grid system with 15 mm white flanges incorporating 6 mm central reveal in white/black colour. Silhoutte, main runners & cross tees to have mitred ends & birdsmouth notches to provide mitred cruciform junctions. The Tee sections have a galvanising of 170 gms per sqm & passed through 500 hrs of salt test. The main runner spaced at 1200 mm c/c should be securely fixe to the structural soffit using Armstrong suspension system at 1200 mm maximum c/c. The first/last Armstron suspension system at the end of each main runner should not be greater than 450 mm from adjacent wall. Cross Tees 1200 mm long should be interlocked between main runners at 600 mm c/c to form 1200 x 600 mm module. 600 x 600 mm module is fortned by fitting 600 mm long flush fitting cross Tees, Perimeter trim consist of Armstron wall angles of size 3000 x 19 x 19 mm secured to walls screws at 450 mm c/c

Taking down UPVC (SWR) pipes any dia.

Supply and fix 110 mm dia bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls.

Supply and fix 75 mm dia bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls.

Supply and fix PVC (SWR) bends any radius 75 mm dia of bore.

Supply and fix PVC (SWR) bends any radius 110 mm dia of bore.

Supply and fix PVC (SWR) floor trap 75 mm dia out let with grating plain including jointing with solvant cement.

Supply and fix PVC (SWR) gully trap 125/110mm, setting and jointing with solvant cement.

Supply and fix UPVC (SN4) pipes single socketed 160 mm bore laid in floor trenches/wall.(ht Upto 20 Mtr including all necessary scaffolding)

S & F 12mm thick wave free toughened clear glass with stainless steel spider fitting,fish mouth channel in bottom and top as per design with and including provision of all other neccessary fixture and accesaries,complete all as specified and directed.

Dismanling Sructural steel work including door ,gates but encluding framed work.

M&L Framed work such as grills, gratings angle for ladder , etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165

S & F for vitreous china semi pedestal pattern (Anglo -Inidan Type) white or colour (excluding fixing bolts, flushing cistern and flush pipe including connection to trap and to flushing pipe anti syphonage pipe etc complete including making good to floor. Make : CERA, in repair.

Supply only plastic water closet seat ,white closed pattern with flat bottom and cover and mild steel chromium plated or aluminised highing device. Make : CERA, in repair

Supply and fixing vitreous china squatting pan 'Orissa' pattern size 580 x 440 mm white with integral foot rest (excluding flushing cistern and flush etc) Make : CERA ,in repair.

S & F for Vitreous china wash basin angle back (Oval type) size 600 x 480 mm white excluding taps waste chain and plug and porcelain stopper including cutting for and pinning in ends of brakets or eracting stand , waste pipe Make : CERA ,in repair.

S & F for pillar taps, cast copper alloy with capstan heads chromium plated screwed down high pressure with or without lettered Hot or cold with long screwed shanks and fly nuts screwed for iron pipe and fixed,in repair

Supply and fix PVC valveless, symphonic action type, flushing cistern low level, white with inlet ball valve float and valve float and handle including brackets 10 ltrs capacity Make : CERA, in repair

Supply and fix flush pipe of polyethylene of high density of PVC 32 mm for low level cistern, in repair.

Supply and fix vitreous china urinals, size 635 x 395 x 420mm, white, half stall long body type, complete. Make : CERA,in repair.

S&F Vitreous china urinal partion white 310X700mm complete.

Supply and fix brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing union cap and fixed 32 mm, in repair

Supply and fix PVC connection 15 mm size with PTMT nuts of length 600 mm in repair

Supply and fix for push tap any colour high pressure of PTMT screwed for iron pipe and fixed suitable for urinals (Minimum weight 15 mm - 50 gms) 15 mm dia in repair.

Supply and fix for urinal spreader of chromium plated fiting with 15 mm dia pipe.in repair

Supply and fix stop valves, cast copper alloy, screwed down, high pressure with crutch or butter fly handle screwed both ends for iron pipe, fancy type chromium plated, 15 mm size, in repair.

Supply and fix Health faucit assembly, brass, chromium plated consist of valve, sprayer, SS flexible pipe for EWC suitable for 15 mm bore pipe fixed In repairs complete.

Supply and fixing in position CP recessed type toilet paper roll holder of size 150 x 150mm with necessary CP screws and washers fixed to wall fixed in repair.Make : Jaguar, Cat No. 35701 or equivalent.

Supply and fix soap dispenser chromium plated Make Jaquar CAT No 1137 or equivalent

Supply and fixed in repair angle cock, fancy type, chromium plated with long shank and cup 15 mm dia, without flange .

S&F Bass chromium plated brass tubular towel rail 20mm dia, D type 60cm long between flange as in repairs.

Dismantling of water tanks and removing to store Exc 500 but n.exc 1000 ltrs.

S & F 1000 ltr rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I

S & F 500 ltr rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I

Taking down steel tubing and connections 15 mm dia

-do- but 20 mm dia

-do- but 25 mm dia

Supplying and laying of 25mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified.

S&F CPVC 25mm outer dia gate valve complete all as specified.

Supply and fix tubes medium grade, galvanized, with all fittings and fixed complete to walls and ceiling or laid in floors 15 mm bore.

S & F 20 mm GI tubes, `medium grade', galvanised, with all fitting; laid in trenches

S & F 25 mm GI tubes, `medium grade', galvanised, with all fitting; laid in trenches

S & F 25 mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 15mm-142 gms/ 20mm-210 gms/25mm-455gms/ 40mm- 690 gms)

S & F 25 mm gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed

S & F fancy type 15 mm bib taps, cast copper ally with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed

M&L for pcc 1:2:4 type B0, 25 mm thick using 12.5 mm graded stone aggregate as in roof padding finished even and smooth.

M&L APP based polymeric membrane minimum weighing 3 Kg/Sqm and minimum 3mm thick reinforced with polyster non woven fabric (Weight not less than 150 gms/Sqm) laid on primed surfaces by forced application incl bituminous primer confirming ot IS-3384 applied @ 0.3 ltr/Sqm and applying aluminium paint @ 100 ml/Sqm complete all as specified and directed. Four course of roof treatment consist of as under :- (a) Applying one coat of bituminous primer conforming to IS 3384 @ 0.3 ltr/Sqm (b) Laying of APP based membrane as specified thickness and weight. (c) Applying one coat bitumen grade 85/25 @ 1.2 Kg/Sqm. (d) Applying one coat of aluminium paint @ 100ml/Sqm.(MAKE:M/S IWL LTD/M/S STP LTD/M/S TEXSA INDIA LTD)

M&L applying 2 coats of Exterior emulsion weather proof paint over a coat of primer incl removal of existing treatment on wall surfaces including cornices, plasters etc by scrapping/down with wire brushes and washing down and removing existing loose finishes particles etc all as specified and directed (Make/Brand Name : Asian Paints(Apex ultima), Berger Paints(Weather coat All Guard).(ht Upto 20 Mtr including all necessary scaffolding)

M&L applying one coat of Exterior emulsion weather proof paint on wall old surfaces including cornices, plasters etc by scrapping/down with wire brushes and washing down and removing existing loose finishes particles etc all as specified and directed (Make/Brand Name : Asian Paints(Apex ultima), Berger Paints(Weather coat All Guard).(ht Upto 20 Mtr including all necessary scaffolding)

Lucky Enterprises

Glacier Cooling Solutions Private Limited

Sreyas Enterprises

yuvan constructions

AishwaryaConstructions

SAI CONSTRUCTIONS