PROVISION OF DEFICIENT IN LIVING OFFICERS ACCN AT MANGALORE

Amount

Schedule A Part I to Part X

Total amount of Sch 'A' Part-I (Buildings & Structures)

Total amount of Sch 'A' Part-II (SITE CLEARANCE & AREA DEVELOPMENT, EXCAVATION & EARTH WORK )

Total amount of Sch 'A' Part-III ( INTERNAL WATER SUPPLY)

Total amount of Sch 'A' Part-IV (INTERNAL ELECTRIC SUPPLY)

Total amount of Sch 'A' Part-V (ROAD, PATH AND CULVERT, STP ROAD)

Total amount of Sch 'A' Part-VI (SEWAGE DISPOSAL)

Total amount of Sch 'A' Part-VII (AREA DRAINAGE)

Total amount of Sch 'A' part-VIII (EXTERNAL ELECTRIC SUPPLY)

Total amount of Sch 'A' part-IX (EXTERNAL WATER SUPPLY)

Total amount of Sch 'A' part-X (LIGHTNING PROTECTION)

Sch 'A' Part- XI (MISCELLANEOUS) Note : This schedule is not pre priced by MES and the pre priced rate indicated as "Rs. 0.00" under Col.5 signifies this fact only.

INTERNAL ELECTRIFICATION: S& F modular type 1 module TV socket complete all as specified and directed Make :- Legrand/Havells/Anchor

S&F 20W surface/wall mounted LED batten having high efficiency long life LED chips with luminious efficiency of >100 lumen/W, Conforming to IS 15885(Part2/sec-13):2012 polycarbonate diffuser, housed in Aluminium channel housing and white colour ABS end caps having input voltage 220-240V 50-60Hz PF>0.95. complete all as specified and directed. Make: Halonix cat No:HLB-08-20-CW-AL or Equivelent in Havells/Wipro/Bajaj

S&F 10W surface/wall mounted LED batten having high efficiency long life LED chips with luminious efficiency of >100 lumen/W, Conforming to IS 15885(Part2/sec-13):2012 polycarbonate diffuser, housed in Aluminium channel housing and white colour ABS end caps having input voltage 220-240V 50-60Hz PF>0.95. complete all as specified and directed. Make: Halonix cat No:HLB-08-10-CW-AL or Equivelent in Havells/Wipro/Bajaj

S&F 25W LED Street Light, pressure die cast housing, prismatic polycarbonate difuser, LEDs with secondary optics and IP65 Protection complte all as secified and directed Make: Bajaj Cat No: 169821 BCLST 25W LED I or Equivalent in Wipro/Havells/Halonix

S&F energy efficient five star rated ceiling fan of size 1200 mm sweep (For Bedroom) complete with stepped type electronic regulator and down rod including provision of flexible copper cable 3 core of size 0.5 sqmm from ceiling rose to fan, provision of 3 mm thick circular Bakelite sheet cover including writing MES NO. 2 CM height with synthetic enamel black paint all as specified and as directed. Make: Bajaj Kassels star or Equivalent in Usha/Crompton/Havells

S&F energy efficient five star rated ceiling fan of size 1400 mm sweep(For Living Room) complete with stepped type electronic regulator and down rod including provision of flexible copper cable 3 core of size 0.5 sqmm from ceiling rose to fan, provision of 3 mm thick circular Bakelite sheet cover including writing MES NO. 2 CM height with synthetic enamel black paint all as specified and as directed. Make: Bajaj Pride Neo or Equivalent in Usha/Crompton/Havells

S&F and connecting up exhaust fan (for Kitchen) 300mm sweep, 900 rpm, heavy duty single phase 240 volts AC 50 Hz and connecting up complete including louvres and including provision of cable 3 core, 0.5 Sqmm multi-stranded copper conductor PVC insulated and PVC sheathed flexible wire from ceiling rose to fan all as specified and as directed. Including writing MES NO. 2 CM height with synthetic enamelled black paint all as specified and as directed. Make: Crompton Trans air 300 or equivalent model of Usha, Havells or BAJAJ

S&F and connecting up non-metallic fresh air fan (For toilet) 250mm sweep,Delivery not less than 860CMH, heavy duty single phase 240 volts AC 50 Hz and connecting up complete including louvres and including provision of cable 3 core, 0.5 Sqmm multi-stranded copper conductor PVC insulated and PVC sheathed flexible wire from ceiling rose to fan all as specified and as directed. Including writing MES NO. 2 CM height with synthetic enamelled black paint all as specified and as directed. Make: Crompton VENTILUS 10" or equivalent model of Usha, Havells or BAJAJ

Supply, fixing and connecting up complete as MCCB incomer VTPN DB 8 way, double door, 415 V, AC, 50 Hz with minimum IP-43 - IK 09 protection conforming to IS-13032 & 8623, universal mounting with copper bus bar, neutral link, earth link, earthing studs, detachable gland plates etc all as specified and as directed. (Make: Legrand Ekinox 5077 27 or equivalent in ABB/SCHNEIDER/L&T).

S&F fabricated panel enclosure of MS sheet 1.6mm thick for housing energy meters(QTY:07nos) having transparent sheet on the doors

S & F for MCCB four pole 415 volt 10 KA, 50 Amps capacity complete all as specified and directed. Make: Havells Cat No. IHLGSF0050 or equivalent in Legrand/Indoasian/HPL.

S & F for MCB SPN 240 volt C curve of 20 Amps capacity complete all as specified and directed.( Make:Havells Cat No.DHMGCSNF006-032 or equivalent in Legrand/Indoasian/HPL)

S & F for MCB SPN 240 volt C curve of 16 Amps capacity complete all as specified and directed.(Make:Havells Cat No.DHMGCSNF006-032 or equivalent in Legrand/Indoasian/HPL)

S & F for MCB SP 240 volt C curve 10 KA of 20 Amps capacity complete all as specified and directed. (Make:Havells Cat No.DHMGCSPF006-032 or equivalent in Legrand/Indoasian/HPL)

S & F for MCB SP 240 volt C curve 10 KA of 16 Amps capacity complete all as specified and directed. (Make:Havells Cat No.DHMGCSPF006-032 or equivalent in Legrand/Indoasian/HPL)

S & F AC Single phase electronic KWH energy meter with MS powder coated enclosure 5-30 Amps, 230 V, 50 Hz complete all as specified and directed Make: L&T Cat No: WM101BC5DL0 or Equivalent in Schneider/Havells/HPL

M&L for Earthing complete with galvanised steel earth plate electrode 600mmX 600mmX 6.3 mm thick buried directely in ground vertically (earth pit not less than 2.25 metres deep below ground level) with top edge of the earth plate not less than 1.5 metres below ground level connected to and including galvanised steel strip of size 25 x 4 mm protected by GI pipe 15 mm dia light grade upto 7.5 metres or equipment which ever is less by means of GI bolts, nuts, check nuts and washers etc and providing GI watering pipe 20 mm dia medium grade, GI funnel with wire mesh including charcoal, salt packed all around the earth plate in layers and PCC earth pit chamber (1:3:6) type C1, RCC cover (1:2:4) type B1 of 50mm thick all as per electrical plate No.3 of SSR Part-I including necessary excavation/earth work in any strata, returning filling, removal of surplus soil and testing for required value complete all as specified and directed.

EXTERNAL ELECTRIFICATION

M&L for Earthing complete with galvanised steel earth plate electrode 600mmX 600mmX 6.3 mm thick buried directely in ground vertically (earth pit not less than 2.25 metres deep below ground level) with top edge of the earth plate not less than 1.5 metres below ground level connected to and including galvanised steel wire of size 4 mm dia protected by GI pipe 15 mm dia light grade upto 7.5 metres or equipment which ever is less by means of GI bolts, nuts, check nuts and washers etc and providing GI watering pipe 20 mm dia medium grade, GI funnel with wire mesh including charcoal, salt packed all around the earth plate in layers and PCC earth pit chamber (1:3:6) type C1, RCC cover (1:2:4) type B1 of 50mm thick all as per electrical plate No.3 of SSR Part-I including necessary excavation/earth work in any strata, returning filling, removal of surplus soil and testing for required value complete all as specified and directed.

EXTERNAL WATER SUPPLY: Supply, install, test and commissioning Monoblock pump set of capacity 5HP/ 3.75KW 3phase 415Volts, Head 20-30mtr 510-348 LPM, Suctionx xdelivery 80x80mm, class B insulation, IP44 Protection incl foundation. Make: kirloskar model KDS-520+

Material and Labour for construction of masonry valve/ stop valve chamber internal size 90cm x 90cm x 90 cm including 100 mm thick PCC (1:5:10) type E2 foundation, PCC 1:3:6 type C1 block masonry in CM (1:6) plastering internal sufaces completely and external surfaces upto 150 mm belowground level, 15 mm thick in CM (1:4) 100 mm thick (1:3:6) Type C1 coping 40x40x6 mm angle iron with 3 mm thick MS sheet cover complete with handle locking arrangement including painting steel and iron surfaces with two coats of synthetic enamel paint over a coat of zinc primer complete all as specified and as directed.

Supply and fix foot valve confirming to IS4038, PN 0.2 80mm (2") dia with cast iron housing, seat slant, stainer, door plate confirming to IS 4038 Make: Kirloskar/Leader/ Upadhyaya/Zoloto

AVIATION LIGHT: Supply and fix aviation obstruction light 2 x 100W LED type yellow painted die cast aluminium housing red coloured with polycarbonate dome and accessories (Make Bajaj Cat No. BJAOL2 BC lamp type GLS2 x 100WBC or equivalent in Crompton/ Havells )

Supply,fix including testing comissioning XLPE insulated screened PVC bedded galvanised steel strip or wire armoured power cable (Heavy duty) 1100 V grade with stranded Aluminium conductor of size 2 core 6 Sqmm on poles /walls as cable for aviation obstruction light all as specified and directed.

S & F metal enclosure DB 3 module IP 20 complete with Timer switch, Power conductor, control MCB DP 16A etc complete Make: Indoasian model;TL016AB0

Internal Water Supply

S & F sink cock with swinging casted round shape spout (wall mounted model) 15mm dia, quarter turn

s & F health faucet with wall hook Make: hindware model No. F160027 or equivalent

S & F Angular stop cock 15mm dia, quarter turn Make: Jaquar Model No CQT-23059

S & F Two way bib tap/ angle cock 15mm Make: Jaquar Model No CQT-23041 or equivalent

S & F 20mm dia PVC Connection pipe 600mm Make: Jaquar Model No ALD-CHR-801B or equivalent

S & F health faucet with flexible pipe (ABS Body) with 01mtr long PVC tube & wall hook Make: Jaquar Model No ALD-CHR-573 or equivalent

S & F Over head shower 120dia with wall mounted shower arm Make: Jaquar Model No OHS-1989 & SHA-477 or equivalent

S & F Bib cock 15mm dia Make: Jaquar Model No CQT-23037

S & F shower wall mixer 15mm dia 2 in 1, Make: Jaquar Model No CON-273KNUPR or equivalent

PILE FOUNDATION : Boring Cast in situ DMC pile of 450mm dia up to12.5mt depth in any type of soil/strata by auger boring or any other approved method, as specified and directed, inclusive of Mobilization & demobilization of piling equipment, erection,dismantling including all labours and material.

Testing of piles (Non Destructive Integrity Test) all as per IS including mobilising and removing the testing equipments from site after testing is completed all as specified and directed.

Reinforced cement concrete of grade M-30 design mix as per IS – 456 with using 20mm graded stone aggregate in cast in situ bored pile foundation of any length/any sections complete all as specified

RCC grade M30 design mix as per IS–456 using 20mm graded stone aggregate in pile caps complete all as specified and shown on drg.

Formwork to sides of pile caps rough finished surface of concrete flat. All as specified and as directed.

PCC 1:4:8 type D2 using 40mm graded stone aggregate for concrete layer below pile caps and foundation complete all as specfified and as shown in drg

Excavation in trenches not exc 1.5m wide and not exc 1.5m in depth for foundation or pile caps, shaft, wells, cess pits, manhole..etc not exc. 10sq.m on plan, getting out in soft/loose soil all as specified and directed

Testing of piles (Routine Load test) all as per IS for 450mm dia Cast in situ piles including mobilising and removing the testing equipments from site after testing is completed all as specified and directed.

Returning/filling in layers and ramming in layers around pile cap,plinth beam etc using excavated soil incl sprading,levelling,well ramming in layers not less than 25cm thick in soft/ loose soil all as specified and directed

Removial of excavated material not exc 50 m and depositing where directed at a level n.exc 1.5m above starting point all as specified and directed

Providing TMT bars (CRS/HCRS/TMT in reinforcement 10mm dia and over for bored piles all as shown on drgs including cut to length, bend to required shape, cranking/hooking ends if necessary and binding with 0.9mm dia MS wire annealed or welding so as to secure the bar firmly in position/required shape complete all as specified and directed

Providing TMT bars (CRS/HCRS/TMT in reinforcement 10mm dia and over for helicals of piles all as shown on drgs including bend tospirally, cranking/hooking ends if necessary and binding with 0.9mm dia MS wire annealed or welding so as to secure the bar firmly in position/required shape complete all as specified and directed

Providing TMT bars (CRS/HCRS/TMT in reinforcement 10mm dia and over for Pile caps all as shown on drgs including cut to size, bend to shape, cranking/hooking ends if necessary and binding with 0.9mm dia MS wire annealed or welding so as to secure the bar firmly in position/required shape complete all as specified and directed

Providing TMT bars (CRS/HCRS/TMT in reinforcement 8mm dia in stirrups all as shown on drgs including cut to size, bend to shape, cranking/hooking ends if necessary and binding with 0.9mm dia MS wire annealed or welding so as to secure the bar firmly in position/required shape complete all as specified and directed

G ANILKUMAR

CREATIVE BUILDERS

WELTRONENGINEERINGSERVICES

Classic Builders