82612 SPECIAL REPAIRS TO NAVAL OFFICERS MESS(NOM) IN BUILDING NO. P-01 UNDER AGE(I) NAVY CHENNAI

Amount

SCHEDULE 'A' PART-I [ B/R WORKS]

Demolition of Brickwork built in cement motar, stone/boulder masonry, build in lime mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles complete all as specified and directed.

Material and Labour for Brickwork with flyash old size bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and directed.

Taking down chowkhats with shutters (without taking off shutters from the frame) n.exc 1.5 sqm each complete all as specified and directed.

Taking down chowkhats with shutters (without taking off shutters from the frame) exc 1.5 sqm but not exc 4.0 sqm each complete all as specified and directed.

Taking down and refixing the same opening of door Shutters of any description exc 1 sqm but not exc 2 Sqm each and including easing and adjusting before fixing of door shutter complete all as specified and directed.

Supply and fix for Aluminium powder coated frame doors windows and ventilators not less than 2.00kg/RM and including aluminium sliding door track channel, including all shutters not less than 1.50 kg/RM including joining cleat for fixing EPDM rubber/ neoprene gasket required with extruded built up standard sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary rollers, angles, and filling up the gaps at junctions, i.e. at top, bottom and sides etc. complete all as specified and directed. Note : Thickness of powder coating not less than 50 micron.

Supply and fix for Powder Coated aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement complete all as specified and directed. Note : Thickness of powder coating not less than 50 micron.

Material and Labour for 15-18mm thick of any shade (table rubbed and polished) laid and jointed in flooring strips, window cills and jambs etc of green Marble over and including 15mm thick backing coat in CM 1:6 complete all as specified and directed

Supply and fix for SS wire cloth 0.45mm nomonal dia of wire and 1.40mm average width of aperture and fixed with SS wire staples complete all as specified and directed.

Supply and fix for plain sheet glass,4mm thick, ordinary quality and glazing with Aluminium clip in square not exceeding 0.5sqm in each complete all as specified and as directed

Supply and fix for plain sheet glass,4mm thick, ordinary quality and glazing with Aluminium clip in square exceeding 0.5sqm in each complete all as specified and as directed

Supply and fix for 5.5mm thick, ordinary quality sheet glass ground or obscured or frosted, on one side and glazing with Aluminium clip in square exceeding 0.5sqm in each complete all as specified and as directed

Supply and fix for 4 mm thick sheet glass Figured glass, pin head type and glazing with glazing clips in squares n exc 0.5 sq. m in each panel complete all as specified and directed.

Supply and fix for 6mm thick Veneered decorative solid Prelaminated hylum sheet, interior grade, prelaminated both side decorative choice lamination fixed to aluminium door shutter etc complete all as specified and as directed.

Supply and fix for solid PVC door frame of size 95mm x 50mm made out of 5mm prelam colour PVC sheet reinforced with MS square tube, single side in opening as per specifications & drawings complete all as specified and directed

Supply and fix for factory made solid PVC moulded door shutter, 28 to 30mme thick (stiles), with 2,4 or 6 raised panel designed with 4mm thick moulded PVC sheet on front face and 4mm plain colour PVC sheet on back face as per specification and drawing complete all as specified and directed

Supply and fix for 2nd class hard wood Plain, solid, straight, chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified.

Supply and fix for 35 mm thick Flush shutters solid core construction, with block board core and plywood face panels, commercial type on both sides and fixed both side 1.50 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified.

Supply and fix for 75mm size, Butt hinges, heavy weight, SS, and fixed complete all as specified and directed

Supply and fix for 125 mm size, Butt hinges, extruded brass, with mild steel hinge pin, bright polished and fixed, type B-11 complete all as specified and directed

Supply and fix for 150 mm long CP decorative type Brass handles, cast type, polished bright handles fixed to plywood or frame complete all as specified and directed

Supply and fix for 200 mm length Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and directed

Supply and fix for Brass Mortice lock, vertical type, size 100 mm of 4 levers as approved by EIC and User complete all as specified and directed

Supply and fix for 18/19 mm thick marine plywood fixed with nails/ screws to frame works as in cupboards etc complete all as specified and as directed.

Supply and fix for white laminates of 0.9mm thick glossy finish colour and pattern as approved adhesive complete all as specified and directed

Supply and fix for decorative laminates of 1mm thick glossy finish, colour and pattern as approved adhesive complete all as specified and directed

Material and labour for 18-20 mm thick machine cut,Granite stone slab (of any type)(table rubbed and polished) as in steps,jambs, pillars, windows, cills, cup board shelfs etc and like in cement mortar 1:4 bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types and making mould on edges including cutting and holes for WHB complete all as specified and directed

Supply and fix for CP decorative type Brass handles, cast type, polished bright handles 75mm long fixed to plywood or frame complete all as specified and directed

Supply and fix for Hasp and staple, safety type, aluminium anodised including bolt to hinge plate and fixed with screws for 150 mm size complete all as specified and as directed.

Supply and fix for cupboard knob Brass knobs 35-40mm dia fixed with screwed and washer of mild steel complete all as specified and directed

Supply and fix for magnetic and connected plate to shutter and frame complete all as specified and directed

Supply and fix for telescopic channel of size 450mm to 560mm of load per 45 kg/cmsq complete all as specified and as directed.

Material and Labour for Providing & injecting ATT chemical at the point of contact of wood work by chemical emulsion (in oil or kerosene based solution) at the rate 0.5 liters/holes by drilling 6mm dia holes at a downward angle of 45 degree at 150mm center and sealing the same.complete all as specified and directed.

Material and Labour for Providing & injecting ATT chemical at the point of contact of voids in masonry wall and floor joins or perimeter of rooms using chemical emulsion one litre per hole, at 300mm intervals including drilling holes at 45 degree and replugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors complete all as specified and directed.Note:- Measurment to be consider only perimeter of wall and depth up 500 mm

Taking down cement Plaster , any description, on brick walls or stone walls,etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

Material and Labour for rendering 15 mm thick on fair faces of brick work or concrete surfaes in CM (1:6) and finised even and smooth (without using extra cement) complete all as specified and directed

Material and Labour for 10 mm thick rendering in CM (1:3) on ceiling on soffits and finised even and smooth (without using extra cement) complete all as specified and directed

Material and Labour for preparation of newly plastered / concrete surfaces by vacuum based sanding machine and applying two coats of oil bound distemper over a coat of primer over 2 coat of birla wall care putty using mechanical tool/auto roller complete all as per manufacturer instruction complete all as specified and directed. Note: All work shall be carried out by approved applicator of paint manufacturer only. The same shall be approved before carrying out the work from AGE(I). Contractor should submit Auth applicator certificate before execution of work.

Material and Labour for applying 2 coats of water proofing dampshield 2K or home shield damp stop on affected dampness areas and work carried out through approved applicator of manufacturer complete all as specified and directed.

Material and Labour for complete removal of existing surfaces including washing / rubbing down with water of wall by vacuum based sanding machine and applying two coats of oil bound distemper/emulsion over coat of alkali resistant primer including chalk whiting over 2 coat of birla wall care putty using mechanical tool/auto roller complete all as per manufacturer instruction and including necessary scaffoldings as reqd etc complete all as specified and directed . Note: All work shall be carried out by approved applicator of paint manufacturer only. The same shall be approved before carrying out the work from AGE(I). Contractor should submit Auth applicator certificate before execution of work.

Material and Labour for Preparation of new wooden surfaces of any description over 10 cm width or girth not otherwise described and applying a coat of wood filler on new works with two or more coats of french polishing including cleaning and preparing the surface complete all as specified and as directed.

Material and Labour for Preparation of old wooden painted surfaces of any description over 10 cm width or girth not otherwise described and applying one coats of Synthetic enamel paint complete all as specified and as directed.

Dismantling floor hearth or wall tiling including cement mortar bedding and rubbish off the premises complete all as specified and directed.

Material and Labour for non- skid mat finish ceramic coloured tiles 7 to 8mm thick (square/Rectangular) area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:6.complete all as specified and directed

Material and Labour for glazed ceramic coloured design tiles 450x300mm x 7mm thick in vertical surface etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick backing coat in CM 1:4 etc complete all as specified and directed.

Material and Labour for dark shade Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:6.complete all as specified and directed

All as above item No 47 but as in skirting/ dado including rendering/ backing coat of CM 1:4 10 mm thick etc complete all as specified and directed.

Taking up & down steel tubing bore of pipe 15 mm connections, including cleaning and removal to store complete all as specified and directed.

Taking up & down steel tubing bore of pipe 20 mm connections, including cleaning and removal to store complete all as specified and directed.

S & F 20 mm outer dia 3-layer PP-R Polypropylene random copolymer concealed pipes SDR 7.4 (PN 16) UV stabilized and composite pressure pipes including all Crimp type internal sealing Planstic metal Composite fittings (such as elbows, tees, reducers, couplers, short pieces, connectors, etc.) and hooks (in case of concealed pipe work)/ clamps (in case of exposed pipe work) etc complete all as specified. having thermal stability for hot & cold water supply including all PP-R plain & brass treaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc complete all as specified and directed.

All as above item No. 51 but for 25 mm outer dia complete all as specified and directed.

M&L for Cutting chases, pinning in. making good to facings for inserting galvalume sheet into the e brick wall where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good to the existing surface, cutting not exc 10 cm girthcomplete all as specified and directed.

Supply and fix 25mm outside dia PPR Gate valves (brass insert) as per requirement of site fixed to PPR pipes complete all as specified and directed.

Supply and fix in repair PVC pipe 110mm dia single socketed in any length with rubber joints fixed to walls and floors including short connections and special clamps etc and including necessary scaffoldings upto G+4 etc complete all as specified and directed complete all as specified and directed.

Supply and fix in repair PVC pipe 75mm dia single socketed in any length with rubber joints fixed to walls and floors including short connections and special clamps etc complete all as specified and directed.

Supply and fix for PVC (SWR) bends any radius bore of dia 110mm with access door complete all as specified and directed.

Supply and fix for PVC (SWR) bends/ Shoes any radius bore of dia 110mm complete all as specified and directed.

Supply and fix for 75mm PVC (SWR) bends any radius bore of dia with access door complete all as specified and directed.

Supply and fix in repair PVC (SWR) floor trap, 75mm dia plainwith grating including jointing with solvent cement complete all as specified and directed.

Supply and fix for 50mm dia bore pipe low density LDPE fixed to wall, ceiling or in floors etc complete all as specified and directed.

Supply and fix for 110 mm PVC (SWR) branch piece, Single Tor Y) equal or unequal of with access door complete all as specified and directed.

S&F Bowl with cistern for coupled WC of size 380X655X765mm, vitreous china of one piece including cutting for and pinning in ends of fixing or erecting stand inclusive of waste pipe and seat cover and P / S Traps etc complete all as specified.

S&F in repair Stainless steel Hand shower (health faucet )15 mm dia and 1.00 mtr long Flexible tube iand wall hook for fixing to walls complete all as specified and directed.

S&F PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed.

S & F in repair Anglular stop valve15mm dia of chromium plated fancy type any colour high pressure screwed for iron pipe and fixed complete all as specified and directed.

S&F in repair 15mm bore dia chromium plated fancy type Bib taps, with capstan head or fancy type knob type , screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repair Table top Wash basins, vitreous china (flat back or angle back type) of 160x495x365mm, including cutting for and pinning in ends of brackets or erecting stand inclusive of waste pipe complete all as specified and directed.

S&F in repair for Pillar cock of Single lever Wash hand basin mixer tall boy with 140mm extension Body fixed spout without popup waste system with 600mm long braided hoses Complete all as specified and as directed.

S&F for CP Toilet Roll Holder complete all as specified and as directed.

S&F for CP towel Ring square all as specified and as directed.

S&F for CP towel rack 600mm long between lower hanges made of brass chromium plated complete all as specified and as directed.

S&F for Glass shelf assmbly 600 mm long and approved by Engineer-in-Charge complete all as specified and as directed.

Supply and fix in repair cabinet mirror of with approved colour complete including necessary fixing arrangements complete all as specified and as directed.

S&F for CP tubular towel rail, 20mm dia, 'D' type, 60cm long between flanges made of brass chromium plated complete all as specified and as directed

S&F for Corner glass shelf with brackets 300 x300mm and approved by Engineer-in-Charge complete all as specified and as directed.

S&F for Soap dish Holder and approved by Engineer-in-Charge complete all as specified and as directed.

S&F for Tumbler Holder and approved by Engineer-in-Charge complete all as specified and as directed.

S&F for Over head shower with arm of 180mm round shape single flow (ABS Body CP with grey face plate) with rubit cleanig system approved by Engineer-in-Charge complete all as specified and as directed.

S&F in repairs for CP Wall mixer with Provision of overhead shower with 115mm long bend pipe on upper side connecting legs &Wall flanges as approved by Engineer-in-Charge complete all as specified and as directed..

Supply and fix in repair for SS Drapery rod of size 28mm dia of SS 304L for window/ doors openings etc complete all as specified and as directed.

Supply and fix for SS Suitable drapery 100mm knobs and bracket including supports holders provided for each window/ doors openings etc complete all as specified and as directed.

M&L for Cleaning the existing sunken surfaces and clean/opening of cracks of existing roof top surface with water and filling of Dr fixit Code No 190 Roof seal flex and applying one or more coat of Dr fixit Code No 148 Roof seal @ 0.9 ltr/ Sqm on existing RCC surfaces complete all as specified and directed.

M&L for 10mm thick rendering on sunken surfaces in CM 1:3 with using with WPC @ 3% by weight of cement. Finishing the even and smooth surface etc complete all as specified and directed Note:- WPC will be measured Separately

M&L for PCC 1:7:12 type F2 using brick coarse aggregate as in sunken slab and applying a tack coat of industrial bitumen 85/25 @ 1.20 Kg/Sqm on plastered surfaces and applying( pidilite/Aqualite or equivalent) in the sunken portion (floor/sides) as per manufactures instructions and removal of existing sunken treatment of lean concrete and brick bats etc all as diected by Engineer-in-charge and testing for leak proof complete all as specified and directed. Note :- Mode of payment only plan area of sunken portion shall be measured

Dismantling wrought iron or mild steel work and including railing etc of any description not otherwise provided for complete all as specified and as directed.

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed.

S & F 30mm Width of flaps (when open) Continuous (piano) hinges, Brass, bright finish or electro galvanised for fixing of cup boards etc complete all as specified and directed.

Material and Labour for Ready Mix Micro concrete of 25 to 40 mm thick consistency of Renderoc S2 or Renderoc RG of FOSROC or equivalent in consistency a batch of 25kg of Renderoc mixed with water n exc 3.50 Ltrs and mixed with 1 kg of polymer acrylic fibers all as per manufacturer's instructions and finished the surfaces even and smooth with 10mm thick rendering in CM 1:4 complete all as specified and directed by Engr-in-Charge including erecting necessary scaffolding (UP to G+2 Storey ) Work carriedout through authorized applicator of approved manufacturer only Make:- FOSROC or equivalent as mentioned in list of make as approved by AGE(I) Note:- The following stages (a) to (e) are included of Materrials and labour will be carried out .:-

(a) Taking out existing unserviceable plaster loose/unsound weaken cement concrete of any description and in any position from existing surface of RCC roof slab/beam/column/RCC facia /RCC chajja with power driver of pneumatic chisel after cleaning of concrete/plastered particles and Removing corrosion and all loose scales rust etc from the visible reinforcement and cleaning the steel reinforcement properly. b) Applying one or more coat of NITO ZINK primer of FOSROC or equivalent ZINK primer of CHEMISTIC/WEBAC as approved by AGE(I) on visible reinforcement surface. Several time prior to placing, the concrete substrates should be saturated with clean water

(c) After drying of water to applying bonding agent of modified styrene butadiene emulsion (SBR bonding agent i.e Nito bond SBR Latex or Nito bond EP of FOSROC or equivalent) in proportion 1 (Nito bond SBR latex): 1 (water): 3 (OP cement) by volume with the brushing etc to bind New CM plaster / Polymer Modified plaster / Concrete / Screed concrete with old surface. (d) Drilling holes for fixing of stirrups with lockfit chemical of FOSROC or equivalent and welded to main bars etc (e) Providing fiber mesh jali fixed to existing RCC roof slab/beam/column/RCC facia /RCC chajja as per directed by Engr-in- Charge Make:- FOSROC or equivalent as mentioned in list of make as approved by AGE(I)

Material and Labour for 15mm thick Rendering in two coats of ( 10 mm thick on first coat and 5mm thick in second coat) on fair faces of brick work or concrete surfaces in CM (1:4) using with WPC @ 3% by wt of cement on second coat complete all as specified and directed. ( Note : WPC shall be measured and paid separately)

Supply only Integral water proofing compound complete all as specified.

Material and Labour for Preparation of new surfaces of wall by vacuum based sanding machine and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. and over two coats of exterior birla wall care putty in two layers using mechanical tool/auto roller complete all as specified and directed all as per manufacturer instruction and including necessary scaffoldings upto G+4 etc etc complete all as specified and directed. Note: All work shall be carried out by approved applicator of paint manufacturer only. The same shall be approved before carrying out the work from AGE(I). Contractor should submit Auth applicator certificate before execution of work.

Material and Labour for complete removal of existing treatment on walls including washing down, rubbing down by vacuum based sanding machine and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. and over two coats of exterior birla wall care putty in two layers using mechanical tool/auto roller all as per manufacturer instruction and including necessary scaffoldings upto G+4 etc etc complete all as specified and directed. Note: All work shall be carried out by approved applicator of paint manufacturer only. The same shall be approved before carrying out the work from AGE(I). Contractor should submit Auth applicator certificate before execution of work.

Removal of building materials/debris from 1.5mtr to a distance of out side of 5.0 KM etc complete all as specified and directed.

SCHEDULE 'A' PART-II [ E/M WORKS]

Taking down old/existing DB/main switches of any size and making good distrubed surface of wall/floor etc complete by disconnecting all as specified and directed.

Taking down old sub main wiring any type/size including making good disturbed surface all as specified and directed.

Material and labour for sub main wiring (concealed) complete with five single core 10 Sqmm FRLS PVC insulated unsheathed stranded copper conductor cable drawn through in and including 25 mm dia rigid non-metallic PVC conduit heavy grade and conduit accessories including 10 Sqmm FRLS PVC insulated unsheathed stranded copper earth cable connected to common earth dolly complete and including cutting chasing in walls for concealed wiring using machine cutting and making good the disturbed surface all as specified and directed. Note: 6 run of 10 sqmm & one run of PVC conduit shall be measured as single unit

Material and labour for sub main wiring (concealed) complete with two single core 10 Sqmm FRLS PVC insulated unsheathed stranded copper conductor cable drawn through in and including 25 mm dia rigid non-metallic PVC conduit heavy grade and conduit accessories including 10 Sqmm FRLS PVC insulated unsheathed stranded copper earth cable connected to common earth dolly complete and including cutting chasing in walls for concealed wiring using machine cutting and making good the disturbed surface all as specified and directed. Note: 3 run of 10 sqmm & one run of PVC conduit shall be measured as single unit

Material and labour for sub main wiring (concealed) complete with two single core 4 Sqmm FRLS PVC insulated unsheathed stranded copper conductor cable drawn through in and including 20 mm dia rigid non-metallic PVC conduit heavy grade and conduit accessories including 4 Sqmm FRLS PVC insulated unsheathed stranded copper earth cable connected to common earth dolly complete and including cutting chasing in walls for concealed wiring using machine cutting and making good the disturbed surface all as specified and directed. Note: 3 run of 4 sqmm & one run of PVC conduit shall be measured as single unit

Taking down carefully any type point wiring (light, fans, socket etc) complete including battens and fittings such as switch, ceiling rose, light fittings, regulators, socket, etc. and making good disturbed surface of wall/floor, etc. complete all as specified and as directed.

Material and labour for point wiring (concealed) on walls and surface on ceiling complete with FRLS PVC insulated unsheathed 1100 Volts grade, conforming to IS-694, 1.5 sq mm (nominal area) multi stranded copper conductor cable drawn though in and including non metallic medium grade rigid PVC conduit heavy grade accessories, ISI marked, 19/20 mm dia including all accessories, concealed in walls by cutting chases using machine and making good the disturbed surface, with and including suitable 1.5 sq mm copper earth continuity wire connected to earth dolly complete for the following complete all as specified and as directed.

(a) One light point controlled by one switch

(b) One fan point controlled by one switch

(c) One exhaust fan point controlled by one switch

(d) One bell/ buzzer controlled by one push switch

(e) One switch socket outlet modular type 3 pin 6 amp on same board.

(f) One light point controlled by two way switch

All as per item No 100 above but 1.5 sq mm cable size with 1.5 sq mm earth continuity wire for one 3 pin socket outlet, 6 Amps on independent board all as specified and as directed.

All as per item No 100 above but 2.5 sq mm cable size with 2.5 sq mm earth continuity wire for one 3 pin socket outlet, 16 Amps on independent board all as specified and as directed.

Supply and Fix Switch modular type, single pole one way 6 Amps complete all as specified and as directed.

S & F 0-4 step, one module, modular type electronic regulator for ceiling fan 1200 mm sweep, 240 volts, 100 Watts humfree single pole, all as specified and as directed.

S & F bell push switch, modular type, 6 Amps, 1 module, 240 volts all as specified and as directed .

Supply and fixing calling bell Ding Dong type , AC, single pole one way 240 volts all as specified and as directed .

S & F socket modular type 6 Amps,240 volts all as specified and as directed.

S & F switch modular type single pole two way 6 amps 240 volts, all as specified and as directed.

M & L for ceiling rose, surface bakelite, 65 x 50 mm, two to three terminals all as specified and as directed.

S & F switch modular type 16 Amps, 240 volts all as specified and as directed.

S & F socket modular type 16 Amps, 3 pin combine, 2 module,240 volts all as specified and as directed.

S & F Lamp Holder with LED lamp 5/7 watts , PVC/Polycarbonate type with cord gird cap all as specified and as directed.

S & F for Modular white cover plate with frame,1 or 2 Module complete all as specified and as directed by Eng-in-Charge.

S & F for Modular white cover plate with frame,3 Module complete all as specified and as directed by Eng-in-Charge.

S & F for Modular white cover plate with frame,6 Module complete all as specified and as directed by Eng-in-Charge.

S & F for Modular white cover plate with frame,8 Module complete all as specified and as directed by Eng-in-Charge.

S & F for Modular Metal flush box,1 or 2 Module complete all as specified and as directed by Eng-in-Charge.

S & F for Modular Metal flush box,3 Module complete all as specified and as directed by Eng-in-Charge.

S & F for Modular Metal flush box,6 Module complete all as specified and as directed by Eng-in-Charge.

S & F for Modular Metal flush box,8 Module complete all as specified and as directed by Eng-in-Charge.

Supply and fix power unit for 1.5/2 ton AC including connecting electric connection complete all as specified and as directed by Eng-in-Charge.

Supply and fix hospitality function, hotel key FOB switch 2M with credit card size key FOB including connecting electric connection complete all as specified and as directed by Eng-in-Charge.

Supply and Fix wall mounted LED batten with decorative end cap of capacity 4feet 20W or nearest higher wattage ,2500 lm ,6500 K suitable for Surface, Wall & Conduit mounting complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size and lamp complete all as specified and directed internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size. complete all as specified and directed.

Supply and fix LED light fitting 2 feet,10 W or nearest higher wattage,230v,suitable for Surface, Wall & Conduit mounting, with integrated LED driver, etc. complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size all as specified and as directed.

Supply and fix LED step light fitting 4 Module, 3W or nearest higher wattage 230v with including suitable for flush box mounting with integrated LED driver, etc. complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size all as specified and as directed.

S & F sheet metal enclosures for DB's for incorporating MCBs,TPN, 4 way, IP-43 with metal double door with 200 amps rated busbar, 415 volts as per IS-8623, including taking down old DB all as specified and as directed.

S & F MCCB TPN, 63 Amps, breaking capacity 16 KA, 415 volts, 50 HZ including making necessary incoming and outgoing electrical connection with suitable size of copper lugs etc. complete all as specified and as directed by Eng-in-Charge.

S & F MCCB TPN, 40 Amps, breaking capacity 16 KA, 415 volts, 50 HZ including making necessary incoming and outgoing electrical connection with suitable size of copper lugs etc. complete all as specified and as directed by Eng-in-Charge.

S & F sheet metal enclosures for DB's for incorporating MCBs, SPN, 8 way, IP-43 with metal double door with 200 amps rated busbar, as per IS-8623, all as specified and as directed.

S & F MCB SPN, 40 Amps, breaking capacity 10 KA 'C' curve confirming to IS/IEC 60898-1 2002,integrated label holder, sliding bottom clamp , IP 20 protected terminal, sliding shutters, 240 volts, 50 HZ including making necessary incoming and outgoing electrical connection with suitable size of copper lugs etc.complete all as specified and as directed by Eng-in-Charge.

S & F MCB SP, 40 Amps, breaking capacity 10 KA 'B' curve confirming to IS/IEC 60898-1 2002,integrated label holder, sliding bottom clamp , IP 20 protected terminal, sliding shutters, 240 volts, 50 HZ including making necessary incoming and outgoing electrical connection with suitable size of copper lugs etc.complete all as specified and as directed by Eng-in-Charge.

S & F MCB SP, 10-32 Amps, breaking capacity 10 KA 'B' curve confirming to IS/IEC 60898-1 2002,integrated label holder, sliding bottom clamp , IP 20 protected terminal, sliding shutters, 240 volts, 50 HZ including making necessary incoming and outgoing electrical connection with suitable size of copper lugs etc.complete all as specified and as directed by Eng-in-Charge.

M & L for earthing complete with galvanised steel earth plate electrode 60cm×60cm× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to 4 mm GI wire as earthing lead by means of bolts, nuts, check nuts and washers of copper all as shown in electrical plate No.3 in SSR part 1 connected to earthing test point,including 20 mm GI pipe (Medium grade) for watering and 15 mm GI pipe (Medium grade) for protection of earth wire and etc.. including testing on completion ,PCC chambers in PCC1:3:6 type C1, RCC M25 type cover slab 50mm thick with 8mm dia TMT HCR/CRS steel bars at 140mm C/C both way and lifting handle GI funnel & wiremesh ,funnel,lugs and charcoal,salt etc all as applicable complete all as specified and as directed by the Engineer-in-Charge.

M & L for Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 4mm dia galvanised iron or steel wire all as specified and as directed.

Taking down and refixing of defective PVC exhaust fan upto 300mm sweep and cleaning winding louver and etc refixing in original position reconnecting both water and electric connection and testing complete all as specified and as directed.

Taking down defectice storage water heater of any capacity from buildings after disconnecting carefully water and electric connection, opening the bottom cover replacing the defective parts i.e (heating element, thermostat pressure release valve air release valve cover and etc refixing in original position reconnecting both water and electric connection and testing complete all as specified and directed.

Supply only geyser tank of capacity 25 ltrs made out of stainess steel completeallas specified and directed.

Taking down and refixing of defective ceiling fan 1200 sweep and including cleaning rewinding, blades and etc refixing in original position reconnecting electric connection and testing complete all as specified and directed.

Taking down energy meter and refixing including connection complete all as specified and directed.

Supply and fixing metal meter box suitable for 4 Nos single phase meter including locking arrangement and painting complete all as specified and directed.

Supply and fixing rigid non-metallic PVC conduit (concealed) inclusive of all tees, bends, elbow reducers bell mouth tube ends and fixing accessories such as couplers lock nuts saddles pipe hooks complete all as specified and directed.

GV Foundations (BID ID -3115913)